1995 Chevrolet Blazer Vehicle Hoods
More 1995 Chevrolet Blazer Vehicle Hoods
Find your specific 1995 Chevrolet Blazer original or aftermarket Vehicle Hoods below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1995 Chevrolet Blazer Vehicle Hoods
Dorman – Help – Hood Prop Rod Clip Assortment (Part No.45396)
from
$8.99
This hood prop rod retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this hood prop rod retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
KAI – Hood Panel Insert (Part No.GMK411325594)
from
$54.99
New Goodmark Ram Air Style Hood Insert
Product Features:
See More
Product Features:
- Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Panel Insert (Part No.GMK414625588)
from
$49.99
New Goodmark Ram Air Style Hood Insert
Product Features:
See More
Product Features:
- Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Panel Insert (Part No.GMK414725599)
from
$34.99
New Goodmark Hood Plastic Insert
Product Features:
See More
Product Features:
- Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GM1236108)
from
$13.99
New Standard Replacement Passenger Side Hood Hinge Spring
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GM1236107)
from
$13.99
New Standard Replacement Driver Side Hood Hinge Spring
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GM1236137)
from
$33.99
New Standard Replacement Hood Hinge Kit
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GM1236112)
from
$9.99
New Standard Replacement Passenger Side Hood Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GM1236111)
from
$9.99
New Standard Replacement Driver Side Hood Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Hood Release Cable With Handle (Part No.912-074)
from
$42.49
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this hood release cable is made to match the original cable on specific vehicles
- Durable construction -manufactured within strict tolerances for reliable longevity
- Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
- Trustworthy value – backed by team of engineers and quality control experts in the United States
Dorman – OE Solutions Hood Release Cable (Part No.O2030703217DOR)
from
$52.11
Restore and maintain the quick, easy opening of your hood with Dorman’s Hood Release Cable. Constructed of high-quality stainless steel, it naturally resists corrosion. Plus, it’s engineered to counteract the wear and tear that can lead to snapping and sticking.
Product Features:
See More
Product Features:
- Comes with handle (where applicable)
- Direct replacement for a proper fit every time
- Durably designed to resist breakage
- Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
Dorman – Hood Release Cable With Handle (Part No.912-020)
from
$40.99
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this hood release cable is made to match the original cable on specific vehicles
- Durable construction -manufactured within strict tolerances for reliable longevity
- Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
- Trustworthy value – backed by team of engineers and quality control experts in the United States
Dorman – Hood Release Cable With Handle (Part No.912-001)
from
$29.99
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this hood release cable is made to match the original cable on specific vehicles
- Durable construction -manufactured within strict tolerances for reliable longevity
- Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
- Trustworthy value – backed by team of engineers and quality control experts in the United States
StrongArm – Back Glass Lift Support: 17.5" Ext Length, 5.9" Travel, 49 Lbs of Force, 1 Pk (Part No.D4642)
from
$17.29
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
StrongArm – Back Glass Lift Support: 17.63" Ext Length, 5.8" Travel, 85 Lbs of Force, 1 Pk (Part No.D4184)
from
$20.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
Atlas Lift – Lift Support (Part No.LS10287)
from
$22.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
StrongArm – Back Glass Lift Support: 19.01" Ext Length, 7.56" Travel, 42 Lbs of Force, 1 Pk (Part No.D4316)
from
$23.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
StrongArm – Back Glass Lift Support: 16.25" Ext Length, 4.25" Travel, 85 Lbs of Force, 1 Pk (Part No.D4190)
from
$27.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
Atlas Lift – Lift Support (Part No.LS10101)
from
$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
StrongArm – Liftgate Lift Support: 22.93" Ext Length, 7.7" Travel, 152 Lbs of Force, 1 Pk (Part No.C4287)
from
$24.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.
Product Features:
See More
Product Features:
- Exact fit original equipment design guarantees correct fit and function
- Engineered and built to meet or exceed original equipment quality standards
- Individually tested for performance and reliability
- Hardened, nitride plated steel shaft provides optimal durability
- Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
- Heavy gauge steel body is electrostatically painted and heat cured to OE specs
- Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
- Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
- No special installation tools required
StrongArm – Back Glass Lift Support: 23.93" Ext Length, 9.75" Travel, 40 Lbs of Force, 1 Pk (Part No.C4799)
from
$27.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
Popular 1995 Chevrolet Blazer Vehicle Hoods Categories
1995 Chevrolet Blazer Vehicle Hoods
Maybe you’re in the middle of a full rebuild of that 1995 Chevrolet Blazer. Maybe you just need a couple of Vehicle Hoods. Either way, Advance Auto Parts has 10 different Vehicle Hoods in our inventory ranging from $8.99 to $54.99. That means you can find the exact parts or products you need to keep that 1995 Chevrolet Blazer running smoothly.
Vehicle Hoods are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1995 Chevrolet Blazer. StrongArm, Dorman, and Atlas Lift are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Vehicle Hoods for your 1995 Chevrolet Blazer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Vehicle Hoods to keep your 1995 Chevrolet Blazer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Vehicle Hoods Brands To Make Your 1995 Chevrolet Blazer Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1995 Chevrolet Blazer demands trusted brand parts and products to keep it running. Many trusted brands of Vehicle Hoods make up Advance Auto Parts’ inventory, and all are ready to help make your Blazer the best it can be. Be sure to browse some of our top Vehicle Hoods brands and parts.
Popular Dorman Vehicle Hoods
We carry Dorman parts in our stock across Hood Release Cables and Hood Prop Rod Retainers categories, plus more. For a 1995 Chevrolet Blazer, our most popular Dorman Vehicle Hoods include:
Top 1995 Chevrolet Blazer Vehicle Hoods from StrongArm
StrongArm products are another trusted brand when it comes to Vehicle Hoods for your 1995 Chevrolet Blazer. Popular StrongArm parts include:
from
$24.99
(20)
Liftgate Lift Support: 22.93" Ext Length, 7.7" Travel, 152 Lbs of Force, 1 Pk
Lift Supports
from
$17.29
(20)
Back Glass Lift Support: 17.5" Ext Length, 5.9" Travel, 49 Lbs of Force, 1 Pk
Lift Supports
from
$23.99
(3)
Back Glass Lift Support: 19.01" Ext Length, 7.56" Travel, 42 Lbs of Force, 1 Pk
Lift Supports
FAQs for 1995 Chevrolet Blazer Vehicle Hoods
What are the most purchased Vehicle Hoods for the 1995 Chevrolet Blazer?
Out of 10 Vehicle Hoods for the 1995 Chevrolet Blazer, the most popular in our inventory are:
