1995 Cadillac Fleetwood Performance and Racing Products
Find Your Specific 1995 Cadillac Fleetwood Performance and Racing Products
Below you will find various in-demand Cadillac Performance and Racing Products, components and accessories for your 1995 Fleetwood. Advance Auto Parts has popular Fleetwood parts like Performance Exhaust Products, Performance Steering Products, Performance Engines and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Fleetwood model years including
1987,
1988,
1989,
1990,
1991,
1992,
1993,
1994,
1996 and more. Select a category of 1995 Cadillac Fleetwood Performance and Racing Products below and start saving instantly.
Popular 1995 Cadillac Fleetwood Performance and Racing Products Categories
Essential Performance and Racing Products for 1995 Cadillac Fleetwoods
PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)
from
$28.99
Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.
Product Features:
See More
Product Features:
- PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
- Precision machined chromoly weights and center plate.
Competition Cams – Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6 (Part No.875-1)
from
$39.99
Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6
B & M – Tork Master 2400 (Part No.20404)
from
$373.99
Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Energy Suspension – Control Arm Bushing Set (Part No.3.3167G)
from
$61.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – High Performance Sway Bar End Link Kit with Hardware (Part No.9.8117R)
from
$29.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
- Allows Vehicle to Work At Maximum Efficiency
- Easy to Install
- Superior Performance and Greater Longevity
- Lasts Much Longer Than OEM Rubber End Links
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
MSD Ignition – Distributor; Cadillac V8 with Vacuum Advance (Part No.8363)
from
$649.99
Cadillac cruisers will be excited about this new Pro-Billet distributor for the 368, 425, 472 and 500 cubic inch engines. The distributor begins life as a billet of 6061-T6 aluminum before being CNC-machined to precise dimensions. The sturdy, flex-free housing is fitted with a sealed ball-bearing and long sintered bushing for high-rpm accuracy. MSD’s race proven magnetic pick-up supplies a trigger signal that is accurate to within one degree at any RPM. Mounted above this pick-up is an adjustable mechanical advance and is supplied with different springs and stop bushings for a number of curves. For street cruising economy, as if there’s any such thing in a caddy, there is a vacuum advance canister.
Product Features:
See More
Product Features:
- Designed for Cadillac 368/425/472 and 500 ci. engines
- Must Be Used w/An MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- Special oil tract improves lubrication to the dist./cam gear
- Mech. advance assem. can be locked out for crank trigger systems
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- CNC machined billet aluminum housing and billet aluminum base
- Vacuum advance canister for improved economy (can be locked out)
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- CARB E.O. Approved
FEL-PRO Performance – Lower Intake Manifold Gasket Set: Includes Sealer, 3 Piece Set (Part No.1284)
from
$38.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5894)
from
$155.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- Complete Kit: Includes Retainers And Locks
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Includes Superior Quality Steel Retainers
- Includes 7 deg. Heat-Treated Valve Stem Locks
- Retainers and Locks Black Oxide Coated
- Dyno Tested And Street Proven
- Great Match to Edelbrock Camshaft Kit
Motive Gear – Performance Differential Ring and Pinion (Part No.G875410)
from
$222.99Product Features:
- GM 10BL 7.5 &7.625 R/P 4.10 MGP 10 3/8 X 18 LH THRED BLTS, PD=1.438
Spectre – Spectre Replacement Air Filter (Part No.HPR6479)
from
$42.99
Spectre’s High Performance Replacement Air Filters are engineered to outperform ordinary paper filters by providing increased air flow for improved performance. Manufactured using high quality materials including pre-dyed synthetic media, urethane, and steel mesh, this performance air filter is factory pre-oiled and ready to use. Use a Spectre Accucharge cleaning and re-oiling kit, part number HPR4820, to maintain your filter’s condition.
Product Features:
See More
Product Features:
- Designed to be superior to stock paper filters
- Comes pre-oiled
- Designed for an easy installation with OE fit
- Made with pre-dyed media for lasting color
K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1065)
from
$68.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle or outdoor power small engine. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
- ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
- MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)
from
$44.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1074)
from
$66.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Energy Suspension – Control Arm Bushing Set (Part No.3.3105G)
from
$107.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.3.3113R)
from
$107.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-601-8)
from
$1152.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – Xtreme Energy 230/236 Hydraulic Flat Cam and Lifter Kit (Part No.CL42-224-4)
from
$449.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Ultra Pro Magnum Rocker Arm Set with 1.6 Ratio for Chevrolet SBC with 7/16" Stud (Part No.1605-16)
from
$476.99
Ultra Pro Magnum Rocker Arm Set with 1.6 Ratio for Chevrolet SBC with 7/16" Stud
Competition Cams – High Energy Aluminum 1.5 Ratio Roller Rocker Set for SBC 265-400 w/ 3/8" Stud (Part No.17001-16)
from
$249.99
These High Energy Die Cast Aluminum Roller Rocker Arms for Chevy V8 265-400 applications are perfect for street and moderate race use. With a 3/8″ stud diameter and 1.5 ratio, the die cast, larger-than-stock body of the rocker arms is made of aluminum for superior strength with light overall weight. High Energy Die Cast Aluminum Roller Rocker Arms from COMP Cams are an affordable option that feature a die cast, aluminum body with a needle bearing fulcrum and roller tip. Designed to be stiffer and more durable, these cost effective rocker arms are capable of providing added valve lift while withstanding the rigors of a performance application. Their specially engineered fulcrum and roller tip create far less friction than sliding factory models to lower oil temperatures, thus improving both response and horsepower. Snap rings are used to hold the trunion and bearings locked in place..
Product Features:
See More
Product Features:
- Cost effective aluminum construction provides superior strength to weight ratio
- Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
- Durable design increases valve lift while withstanding the rigors of moderate race use
- Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.
Mr. Gasket – Rear Main Seal Gasket (Part No.29)
from
$48.99
This Mr. Gasket Rear Main Seal is made from Viton®: Rubber. This style of rubber can handle high temperature like silicone rubber, but with superior abrasion resistance. Its durability and it’s double, offset lip seal design make it recommended for applications that have high engine vacuum, like racing engines that utilize external vacuum pumps for crankcase evacuation.
Product Features:
See More
Product Features:
- Repairs That Leaky Rear Main Sail
- Viton« Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
- Viton® Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
- Upgrade for Rope Seal Equipped Cars or Silicone Rubber Main Seals
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2919)
from
$37.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
Competition Cams – Magnum/Drag Race 253/253 Hydraulic Flat Cam (Part No.12-214-4)
from
$288.99
HYDRAULIC – Magnum: Pro Street/bracket, limited street driving. Intake, gears, 3500+ stall. Racy idle. 10.5:1 compression. OR Drag Race: 3500-4000 stall or 4 speed with 11:1+ compression.
Product Features:
See More
Product Features:
- HYDRAULIC – Magnum: Pro Street/bracket, limited street driving. Intake, gears, 3500+ stall. Racy idle. 10.5:1 compression. OR Drag Race: 3500-4000 stall or 4 speed with 11:1+ compression.
- 305/305 Advertised Duration, 253/253 Duration @ .050″, .525″/.525″ Lift, 110 Lobe Separation
- Valve spring upgrade required
Competition Cams – Big Mutha’ Thumpr 242/257 Hydraulic Flat Cam (Part No.42-602-5)
from
$341.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
B & M – Automatic Shifter, Quicksilver 4 Speed (Part No.80683)
from
$483.99
The B&M Quicksilver features a ratcheting action for positive shifts, Chrome Knob, neutral safety switch, NHRA/IHRA approved Reverse Lockout. Fits Most 3 and 4 speeds.
Product Features:
See More
Product Features:
- Universal Floor Mount Application
- Base Trimmed For Custom Fit
- Cable Operated
- Quick Installation
- Accurate Shifting
B & M – Automatic Shifter, Z-Gate (Part No.80681)
from
$299.99
Reverse lockout meets NHRA and IHRA requirements. Includes neutral safety switch, backup light switch, black T-Handle. Fits most 3 Speed applications.
Product Features:
See More
Product Features:
- Base Trims To Custom Fit Floor
- NHRA/IHRA Reverse Lockout Meets Requirements
- Includes Neutral Safety Switch
- Includes Backup Light Switch
- Includes Black T-Handle and Cable
Upgrade your 1995 Cadillac Fleetwood with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1995 Cadillac Fleetwood, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Performance and Racing Products are key to keeping your Fleetwood functioning at its best. At Advance Auto Parts, we offer a wide selection of 70 Performance and Racing Products for the 1995 Cadillac Fleetwood, designed to meet your needs without breaking the bank.
From
Performance Exhaust Product
replacements to
Performance Steering Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1995 Cadillac Fleetwood at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $9.99 to $1,733.00, with
an average price of $350.63.
Our 70 Performance and Racing Products in stock come from 12 trusted brands, so you’re sure to find the right part for your 1995 Cadillac Fleetwood without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1995 Cadillac Fleetwood, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Energy Suspension, Edelbrock, B & M, and more.
Energy Suspension Performance and Racing Products
start at just $9.99 and boast an impressive 4.4 stars average rating from customers.
Edelbrock and B & M also bring quality to the table, with Performance and Racing Products available starting at $64.99, and at an average 4.4 stars rating.
With 156 customer reviews and counting, our 1995 Cadillac Fleetwood Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1995 Cadillac Fleetwood is always ready to roll. We’re committed to providing you with everything you need to keep your Fleetwood in top shape, all in one place.
Start shopping confidently below for your 1995 Cadillac Fleetwood!
Best-Selling Performance Exhaust Products for 1995 Cadillac Fleetwoods
Enhance the driving experience in your Cadillac with 2 quality Performance Exhaust Product components, starting at $49.99.
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5965)
from
$49.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1470)
from
$49.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Most Popular 1995 Cadillac Fleetwood Performance Steering Products
Customize your Cadillac with 3 Performance Steering Products products
like Performance Sway Bar Link Kits and
Performance Tie Rod End Boots, all
priced under $29.99.
Energy Suspension – High Performance Sway Bar End Link Kit with Hardware (Part No.9.8117R)
from
$29.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
- Allows Vehicle to Work At Maximum Efficiency
- Easy to Install
- Superior Performance and Greater Longevity
- Lasts Much Longer Than OEM Rubber End Links
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Top Picks for 1995 Cadillac Fleetwood Performance Engines
Upgrade Cadillac Fleetwoods with top-quality Performance Engines parts, including 44 OEM and aftermarket selections for your 1995 model.
FEL-PRO Performance – Lower Intake Manifold Gasket Set: Includes Sealer, 3 Piece Set (Part No.1284)
from
$38.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Edelbrock – Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 (Part No.5802)
from
$64.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)
from
$159.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- Complete Kit: Includes Retainers And Locks
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Includes Superior Quality Steel Retainers
- Includes 7 deg. Heat-Treated Valve Stem Locks
- Retainers and Locks Black Oxide Coated
- Non-Rotator Style: Dyno Tested and Street Proven
- Great Match to Edelbrock Camshaft Kit
Competition Cams – Big Mutha’ Thumpr 243/257 Hydraulic Flat Cam/Lifter Kit (Part No.CL12-602-4)
from
$914.99
SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
Product Features:
See More
Product Features:
- Cam and lifter kit for Small Block Chevy engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
- 295/313 Advertised Duration, 243/257 Duration @ .050″, .500″/.486″ Lift, 107 Lobe Separation
- Valve spring upgrade required
Competition Cams – High Energy/Marine 218/218 Hydraulic Flat Cam/Lifter Kit (Part No.CL12-210-2)
from
$898.99
SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – High Energy: Good street performance with stock converter, choppy idle. OR High Energy Marine: Biggest cam for inboard/outboard. Good for ski, economy and light performance.
Product Features:
See More
Product Features:
- Cam and lifter kit for Small Block Chevy engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – High Energy: Good street performance with stock converter, choppy idle. OR High Energy Marine: Biggest cam for inboard/outboard. Good for ski, economy and light performance.
- 268/268 Advertised Duration, 218/218 Duration @ .050″, .454″/.454″ Lift, 110 Lobe Separation
- Valve spring upgrade required
B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)
from
$449.99
Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)
from
$69.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Mr. Gasket – Rear Main Seal Gasket (Part No.29)
from
$48.99
This Mr. Gasket Rear Main Seal is made from Viton®: Rubber. This style of rubber can handle high temperature like silicone rubber, but with superior abrasion resistance. Its durability and it’s double, offset lip seal design make it recommended for applications that have high engine vacuum, like racing engines that utilize external vacuum pumps for crankcase evacuation.
Product Features:
See More
Product Features:
- Repairs That Leaky Rear Main Sail
- Viton« Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
- Viton® Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
- Upgrade for Rope Seal Equipped Cars or Silicone Rubber Main Seals
Competition Cams – Xtreme Energy 230/236 Hydraulic Flat Cam (Part No.12-246-3)
from
$258.99
HYDRAULIC – Xtreme Energy: Very strong mid-range torque and throttle response, 2200+ stall.
Product Features:
See More
Product Features:
- HYDRAULIC – Xtreme Energy: Very strong mid-range torque and throttle response, 2200+ stall.
- 274/286 Advertised Duration, 230/236 Duration @ .050″, .490″/.490″ Lift, 110 Lobe Separation
- Valve spring upgrade required
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Magnum 224/224 Hydraulic Flat Cam (Part No.12-211-2)
from
$254.99
HYDRAULIC – Magnum: High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.
Product Features:
See More
Product Features:
- HYDRAULIC – Magnum: High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.
- 270/270 Advertised Duration, 224/224 Duration @ .050″, .470″/.470″ Lift, 110 Lobe Separation
- Valve spring upgrade required
- Can be used with mild ratio rocker arms and traditional performance valve springs.
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1074)
from
$66.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Competition Cams – XFI 230/236 Hydraulic Roller K-Kit for GM LT1/LT4 (Part No.K07-467-8)
from
$1733.00
XFI 230/236 Hydraulic Roller K-Kit for GM LT1/LT4
Competition Cams – XFI 242/248 Hydraulic Roller K-Kit for GM LT1/LT4 (Part No.K07-468-8)
from
$1733.00
XFI 242/248 Hydraulic Roller K-Kit for GM LT1/LT4
Competition Cams – High Energy 206/206 Hydraulic Flat Cam K-Kit (Part No.K12-205-2)
from
$1201.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-601-8)
from
$1152.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – Big Mutha’ Thumpr 243/257 Hydraulic Roller Cam/Lifter Kit (Part No.CL12-602-8)
from
$1152.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
B & M – Holeshot 2400 (Part No.70419)
from
$670.99
HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) Application: HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- New Turbine Hub
- New Springs/Rollers In Stator
B & M – Torque Converter, Holeshot 2000 (Part No.70417)
from
$625.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Competition Cams – XE 210/220 HRLRLT1/4 (Part No.07-304-8)
from
$611.99
XE 210/220 HRLRLT1/4
Competition Cams – XFI 230/236 HRLLT1/4 (Part No.07-467-8)
from
$611.99
XFI 230/236 HRLLT1/4
Competition Cams – XE 224/230 HRLRLT1/4 (Part No.07-503-8)
from
$611.99
XE 224/230 HRLRLT1/4
Competition Cams – XFI 242/248 HRLLT1/4 (Part No.07-468-8)
from
$611.99
XFI 242/248 HRLLT1/4
Competition Cams – XE 230/244 HRLLT1/4 (Part No.07-306-8)
from
$611.99
XE 230/244 HRLLT1/4
Competition Cams – XE 220/230 HRLRLT1/4 (Part No.07-305-8)
from
$611.99
XE 220/230 HRLRLT1/4
In-Demand Performance Air Filters for 1995 Cadillac Fleetwoods
Select from 2 premium Performance Air Filters parts for your 1995 Cadillac Fleetwood, with prices ranging from $42.99 to $83.99.
K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2057)
from
$83.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
- ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
- MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
Spectre – Spectre Replacement Air Filter (Part No.HPR6479)
from
$42.99
Spectre’s High Performance Replacement Air Filters are engineered to outperform ordinary paper filters by providing increased air flow for improved performance. Manufactured using high quality materials including pre-dyed synthetic media, urethane, and steel mesh, this performance air filter is factory pre-oiled and ready to use. Use a Spectre Accucharge cleaning and re-oiling kit, part number HPR4820, to maintain your filter’s condition.
Product Features:
See More
Product Features:
- Designed to be superior to stock paper filters
- Comes pre-oiled
- Designed for an easy installation with OE fit
- Made with pre-dyed media for lasting color
Most Sold 1995 Cadillac Fleetwood Performance Oil Filters
Explore our best-selling Cadillac parts for the 1995 Fleetwood among 1 OEM and aftermarket options starting from $17.99.
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Top-Rated Performance and Racing Products Brands For Your 1995 Cadillac Fleetwood
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1995 Cadillac Fleetwoods. Below you’ll find some of our best rated Performance and Racing Products from Energy Suspension, Edelbrock, and B & M, and more. Performance and Racing Products from these brands that fit a 1995 Fleetwood start at just $9.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Energy Suspension 1995 Cadillac Fleetwood Performance and Racing Products
When it comes to maintaining or upgrading your 1995 Cadillac Fleetwood, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Energy Suspension ticks all of those boxes. We offer a wide selection of Energy Suspension Performance and Racing Products, specifically designed for the 1995 Cadillac Fleetwood. With over 2 Energy Suspension brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $9.99, with an average price of just $19.99. Plus, with over 10 customer reviews and an average rating of 4.4 stars, you can trust that our Energy Suspension Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$9.99
(3)
Tie Rod Dust Boot
“Replaced the old torn boot and added a bit of color for a low cost.”
Popular Edelbrock 1995 Cadillac Fleetwood Performance and Racing Products
Edelbrock auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1995 Cadillac Fleetwood owner should feel confident when installing genuine Edelbrock parts in their vehicle. To ensure the best fit and performance for your 1995 Fleetwood, Advance Auto Parts carries a full inventory of 2 Edelbrock Performance and Racing Products. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Edelbrock Performance and Racing Products range from $64.99 to $159.99, plus, with more than 3 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$159.99
(1)
Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95
“Excellent product.”
from
$64.99
(2)
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
“Used with the smallest Comp Thumpr Cam, good to 5500 RPM, Cost is great, No valve float. I would use again with a samll to medium cam and 416 heads.”
FAQs for 1995 Cadillac Fleetwood Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1995 Cadillac Fleetwoods?
Out of 70 Performance and Racing Products that fit 1995 Cadillac Fleetwoods, the following parts are the top sellers:
- High Performance Sway Bar End Link Kit with Hardware (16360004) – $29.99
- Tie Rod Dust Boot (17360821) – $9.99
- Spectre Replacement Air Filter (10162702) – $42.99
What’s the price range for 1995 Cadillac Fleetwood Performance and Racing Products?
Performance and Racing Product prices for the 1995 Cadillac Fleetwood start at $9.99 and go up to $1,733.00 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1995 Cadillac Fleetwood?
The average price for Performance and Racing Products for the 1995 Cadillac Fleetwood is $350.63. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Cadillac Fleetwood model years?
What are the cheapest Performance and Racing Products for my 1995 Cadillac Fleetwood?
The cheapest 1995 Cadillac Fleetwood Performance and Racing Products we carry in stock are:
- Tie Rod Dust Boot (17360821) – $9.99
- Tie Rod Dust Boot (22906874) – $9.99
- 7 Degree Steel Retainer for 11/32" Valve with 26915/26918 Beehive Springs (50289503) – $10.99
- Magnum 7.200" Long, .080" Wall, 5/16" Diameter Pushrod (50289263) – $14.99
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120007) – $17.99
What are the top-rated Performance and Racing Products that fit the 1995 Cadillac Fleetwood?
Out of 156 reviews by customers, our 1995 Cadillac Fleetwood Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1995 Cadillac Fleetwood and their top-rated products:
- Performance Steering Products
- High Performance Sway Bar End Link Kit with Hardware (16360004) – $29.99
- Tie Rod Dust Boot (17360821) – $9.99
- Performance Oil Filters
- High Performance Sway Bar End Link Kit with Hardware (16360004) – $29.99
- Tie Rod Dust Boot (17360821) – $9.99
- Performance Air Filters
- High Performance Sway Bar End Link Kit with Hardware (16360004) – $29.99
- Tie Rod Dust Boot (17360821) – $9.99
What types of Performance and Racing Products do you sell for my 1995 Cadillac Fleetwood?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1995 Cadillac Fleetwood:
Can I get help with 1995 Cadillac Fleetwood Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Performance and Racing Products and more.
What is your return policy for Cadillac Fleetwood Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Cadillac Fleetwood Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
