1995 BMW 540i Wheels and Tires
More 1995 BMW 540i Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 1995 BMW 540i, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 1995 BMW 540i Wheels and Tires
Huf North America – 315/433MHz Universal Sensor (Part No.UVS7050)
from
$42.99
Professional installation is strongly suggested
Product Features:
See More
Product Features:
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.33500)
from
$41.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – Replacement Sensor 433MHz; flexible valve 0 to 36 degrees;3 yr warranty (Part No.RDE001V21)
from
$109.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- OE Replacement Direct-Fit TPMS Sensor 433MHz with Metal valve (clamp-in)
- Match OE Sensors in function, design and quality.
- No programming required. Quick installation with only a relearn process needed.
- Just install sensor and relearn the vehicle.
- Have WAL technology for locating tire positon.
- Flexible valve angle 0 to 36 degrees.
- For specific models from Alfa Romeo, Audi, Bentley, BMW, Ferrari, Maserati, Maybach, Mercedes-Benz, Porsche, VW
A.P.A. URO – Wheel Bearing Dust C (Part No.K7005285959APA)
from
$5.91
Wheel Bearing Dust C
NTN – BCA Wheel Bearing (Part No.K8000279217NTN)
from
$71.06
Application-Specific Engineering Design to ensure the correct fit, function and high performance of the wheel bearing. BCA supplies premium replacement bearings that meet or exceed the OE specifications. Premium Quality Materials are used for forged steel rings, seals, precision cages, rolling elements and premium grease, to ensure that our customers receive a robust, durable product. Seals are customized for each BCA hub based on application-specific materials and design requirements to minimize the chance of contamination and maximize bearing life. Precision Cage on BCA bearings are designed to keep the rolling elements of the bearing spaced correctly. The cages undergo design verification and production validation testing to ensure high quality. Pre-Lubrication of all BCA wheel bearings with premium grease for your convenience. This is a major advantage so you do not have to worry about grease or seal application.
Product Features:
See More
Product Features:
- For wheel bearings, BCA utilizes Forged Steel in the inner and outer rings that meets our stringent steel quality specifications to optimize bearing life.
- For taper bearings, BCA utilizes Case Carburized Steel for heavy duty shock loads and longer life.
Driveworks – Wheel Hub Assembly (Part No.NT513125)
from
$38.99
DRIVEWORKS Wheel Hub assemblies are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hub assemblies are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of DRIVEWORKS Wheel Hub assemblies. DRIVEWORKS Wheel Hub assemblies come complete with wheel studs, hub and bearings where applicable. ABS Wheel Sensors are also provided where applicable.
Product Features:
See More
Product Features:
- Constructed from quality materials for extended durability
- Integral raceway provides proper clearance between the ball and bearing riding surfaces
- Precision-matched components deliver smooth and quiet operation
- Manufactured to strict engineering quality standards
- Quality ABS leads are 100% tested to ensure longevity and performance (where applicable)
- Go through a vacuum vulcanization process to enhance the structural integrity of the seal and rubber components (where applicable)
- Brand may vary by location
Driveworks – Hub & Bearing Assembly (Part No.NT513172)
from
$76.99
Driveworks hub bearing assembly is designed to meet or exceed original equipment (OE) standards in form, fit and function. The hub bearing assembly is designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of Drivework’s hub bearing assembly. The hub bearing comes complete with wheel studs, hub and bearings. Also, includes ABS Wheel Sensors where applicable.
Product Features:
See More
Product Features:
- Constructed from high-quality materials for extended durability
- Integral raceway provides proper clearance between the ball and bearing riding surfaces
- Ensures proper function and quiet operation
- Precision-matched components deliver smooth and quiet operation
- Manufactured to strict engineering quality standards
- Brand may vary by location
McGard – Black Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M14x1.25 Thread Size) (Part No.67226BK)
from
$374.99
The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- The bolt stem has a dacromet coating to meet O.E.M.standards.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with a tapered seat.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
McGard – Chrome Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M12x1.5 Thread Size) (Part No.67179)
from
$344.99
The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- The bolt stem has a dacromet coating to meet O.E.M.standards.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- Replaces M12x1.5 BMW/MINI cone seat lug bolt part number 36-13-6-781-150. For use on Original Equipment cone seat aluminum wheels and Aftermarket cone seat aluminum wheels that use the Original Equipment fasteners. NOT for use with wheel spacers.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
McGard – Chrome Cone Seat Lug Bolt Wheel Installation Kit for 5 Lug Vehicles (M14x1.25 Thread Size) (Part No.67226)
from
$279.99
The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard wheel locks and lug bolts are manufactured in the EU and USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The nickel chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- The bolt stem has a dacromet coating to meet O.E.M.standards.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with a tapered seat.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
- Set of 16 Lug Bolts, 4 Wheel Locks, 1 Key & 1 Key Storage Pouch.
Autel – Adjustable Angle 1-Sensor Rubber (Part No.300020)
from
$41.99
The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Maximum Signal Strength, Battery Reliability.
- 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
- Combined Frequency – 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99 Percent of OE Sensors
- Meets SAE Standards J1205 and J1206
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – MX-Sensor 1-SensorM Bulk Box (20) (Part No.300060)
from
$525.99
Product Features:
See More
- Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve
- Combined Frequency: 315MHz & 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – Replacement Sensor 433MHz; flexible valve 0 to 36 degrees;3 yr warranty (Part No.RDE047V21)
from
$78.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- OE Replacement Direct-Fit TPMS Sensor 433MHz with Metal valve (clamp-in)
- Match OE Sensors in function, design and quality.
- No programming required. Quick installation with only a relearn process needed.
- Just install sensor and relearn the vehicle.
- Have WAL technology for locating tire positon.
- Flexible valve angle 0 to 36 degrees.
- For specific models from Audi, Bentley, BMW, Ferrari, Lamborghini, McLaren, Mini, Porsche, Rolls Royce, VW
Dorman – Wheel Stud (Part No.O8060833270DOR)
from
$37.41
Wheel Stud
McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27226)
from
$59.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a tapered seat.
McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27178)
from
$84.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a tapered seat.
Dorman – Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, Spline Drive Hex Size, Chrome, 4 Pack (Part No.712-301)
from
$16.29
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27179)
from
$59.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a tapered seat.
Rein – Wheel Bolt (Part No.HWB0009)
from
$3.29
Rein OE quality wheel bolts fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original wheel bolts are identical to OEM.
Product Features:
See More
Product Features:
- Wheel bolt is produced by an OE manufacturer
- Packaged in convenient quantities.
- Direct replacement for correct fitments
- Manufactured to strict engineering standards/specifications in materials and tolerances
Dorman – Wheel Bolt: M14-1.25 Thread Size, Conical – 60 deg Seat Style, 17 mm Hex Size, Black (Sold by each) (Part No.610-532)
from
$5.79
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.
Product Features:
See More
Product Features:
- Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
- Durable construction – made of quality materials for safe, reliable service
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
McGard – Black Cone Seat Style Lug Bolt (M14 x 1.25 Thread Size) – Box of 50 Lug Bolts (Part No.69726BK)
from
$1024.99
McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with a tapered seat.
- Replaces BMW/MINI M14x1.25 cone seat lug bolt part number 36-13-6-781-151.
Dorman – Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, 17 mm Hex Size, Black, 1 Pack (Part No.610-574.1)
from
$4.79
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.
Product Features:
See More
Product Features:
- Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
- Durable construction – made of quality materials for safe, reliable service
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
McGard – Chrome Cone Seat Style Lug Bolt (M14 x 1.25 Thread Size) – Box of 50 Lug Bolts (Part No.69726)
from
$759.99
McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard lug bolt is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with a tapered seat.
- Replaces BMW/MINI M14x1.25 cone seat lug bolt part number 36-13-6-781-151.
MOOG Hub Assemblies – Hub Assembly (Part No.512225)
from
$68.99
Designed to provide enhanced endurance, maximum contamination exclusion, and proper fit, form and function.
See More
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-513180)
from
$47.99
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
FAG – Wheel Bearing (Part No.K800068144FAG)
from
$120.70
FAG is a supplier of original equipment wheel bearings, hubs and seals to major automobile manufacturers and 1st/2nd tier suppliers throughout the world. All FAG wheel bearings are maintenance free and have been designed for the entire life of the vehicle.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Maintenance free
- Premium modified bearing steel
FAG – Wheel Bearing (Part No.K800078298FAG)
from
$70.81
FAG is a supplier of original equipment wheel bearings, hubs and seals to major automobile manufacturers and 1st/2nd tier suppliers throughout the world. All FAG wheel bearings are maintenance free and have been designed for the entire life of the vehicle.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Maintenance free
- Premium modified bearing steel
Popular 1995 BMW 540i Wheels and Tires Categories
1995 BMW 540i Wheels and Tires
You count on your 1995 BMW 540i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 23 Wheels and Tires ranging in price from $3.29 to $1,024.99, you’re sure to find everything you need for your 1995 BMW 540i.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 10 different brands like Schrader, Driveworks, and Dorman. 1995 BMW 540i Wheels and Tires start as low as $3.29!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 80 extensive product reviews on 1995 BMW 540i Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Hub and Bearing Assembly with 3.0 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 1995 BMW 540i below to get started!
Top-Rated Wheels and Tires Brands For Your 1995 BMW 540i
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1995 BMW 540i running right for years to come. In our inventory you’ll find brands like Schrader, Driveworks, Dorman, and even more.
Popular Dorman – Pik-a-Nut Wheels and Tires
You’ll find popular Dorman – Pik-a-Nut brand products across Wheel Hardware. All are waiting to get your 1995 BMW 540i back on the road. Some of the top-rated Dorman – Pik-a-Nut products in these categories are:
from
$4.29
(1)
Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, 17 mm Hex Size, Black, 1 Pack
Wheel Bolts
Top-Rated Wheels and Tires
If are what you’re looking for, our inventory holds plenty. We stock brand Wheels and Tires for your 1995 BMW 540i, and some of our most reviewed parts include:
from
$41.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Remote Tire Pressure Sensors
FAQs for 1995 BMW 540i Wheels and Tires
What are the most purchased Wheels and Tires for the 1995 BMW 540i?
Out of 23 Wheels and Tires for the 1995 BMW 540i, the most popular in our inventory are:
from
$51.99
This product is not rated
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
Remote Tire Pressure Sensors
from
$3.99
This product is not rated
Wheel Bolt: M12-1.50 Thread Size, Conical – 60 deg Seat Style, 17 mm Hex Size, Silver (Sold by each)
Wheel Bolts
What are the top-rated 1995 BMW 540i Wheels and Tires?
Top-rated Wheels and Tires for your 1995 BMW 540i based on customer reviews/ratings are:
from
$112.99
(4)
Hub and Bearing Assembly
“Moog always has quality parts, you can’t go wrong. Install went smooth!”
