1995 BMW 325is Exhaust Parts
More 1995 BMW 325is Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1995 BMW 325is, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1995 BMW 325is Exhaust Parts
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.46748)
from
$344.99
Combining industry-leading coverage with a direct fit OE-style replacement, Walker® Quiet-Flow® muffler assemblies deliver a precision fit, superior flow and OE-style sound. Quiet-Flow muffler assemblies are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- RESISTS CORROSION — Internal drainage system helps reduce moisture collection
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
BRExhaust – Original Equipment Style Direct-Fit Muffler Assembly – 282-215 (Part No.282-215)
from
$361.99
BRExhaust Direct-Fit OE Style Exhaust Muffler AssemblyThis BRExhaust muffler assembly is engineered to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature a OE-style direct fit for your import or domestic – while the interior design of the muffler box ensures quiet performance.
Product Features:
See More
Product Features:
- Aluminized steel construction for maximum durability
- Constructed to reduce flex and withstand vehicle vibration
- Easy installation and perfect fitment_x000d_
- Thicker hangers for added strength
- External drain hole extends muffler life by allowing moisture to escape_x000d_
- Uniform flow holes provide even distribution of exhaust flow through box interior
Walker – Hanger Length 2.5 (Part No.35123)
from
$11.79
Complete your exhaust repair with Walker® exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS — Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Vaico – Exhaust Hanger (Part No.H805076123VCO)
from
$4.40
Exhaust Hanger
MagnaFlow – Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.23554)
from
$579.99
MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23554 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1987-1993 BMW 325i and 1987-1991 BMW 325is. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94007)
from
$124.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94007 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Elring – Exhaust Manifold Gas (Part No.A811195917ELR)
from
$34.19
Exhaust Manifold Gas
Elring – Exhaust Manifold Gas (Part No.A8111681922ELR)
from
$8.60
Exhaust Manifold Gas
Victor Reinz – Exhaust Manifold Gasket Set (Part No.15-27122-01)
from
$43.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
HJS – Exh. Man. to Pipe Ga (Part No.H4003103581HJS)
from
$7.92
Exh. Man. to Pipe Ga
APA/URO Parts – Exhaust Clamp (Part No.H802076107APA)
from
$12.63
Exhaust Clamp
MTC – Exhaust Hanger Bracket (Part No.H801076109MTC)
from
$2.62
The MTC exhaust brackets are easily installed and durably built. Highly resistant to rust and corrosion, they withstand the harsh environment underneath your vehicle-helping to ensure proper exhaust system performance.
Product Features:
See More
Product Features:
- Plated or coated for corrosion resistance
- Direct replacement for a proper fit every time
- Firmly mounts exhaust pipe underneath the car, helping to prevent pipe detachment, rattling noises, and exhaust failure
- No special tools needed for replacement
APA/URO Parts – Exhaust Clamp (Part No.H802076118APA)
from
$26.53
Exhaust Clamp
APA/URO Parts – Exhaust Clamp (Part No.H802076108APA)
from
$24.86
Exhaust Clamp
CRP – Exhaust Nut (Part No.H1001417721CRP)
from
$2.04
Exhaust Nut
HJS – Exhaust Seal Ring (Part No.H4002686265HJS)
from
$7.85
Exhaust Seal Ring
BRExhaust – Exhaust Flange Gasket (Part No.256-395)
from
$13.99
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Designed for a leak free connection
- OE structure and design
- Built to OEM specifications
- Secure gas-tight connection
Walker – 3 Bolt Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials (Part No.31582)
from
$5.49
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
HJS – Exhaust Seal Ring (Part No.H4002686273HJS)
from
$11.28
Exhaust Seal Ring
Walker – Donut Exhaust Pipe Flange Gasket: Graphite with Steel, Heat Resistant, Premium Materials (Part No.31583)
from
$9.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
HJS – Exhaust Seal Ring (Part No.H4002743781HJS)
from
$9.52
Exhaust Seal Ring
CRP – Exhaust Flange Nut (Part No.H100830970CRP)
from
$1.90
Exhaust Flange Nut
Popular 1995 BMW 325is Exhaust Parts Categories
1995 BMW 325is Exhaust Parts
You count on your 1995 BMW 325is to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 21 Exhaust Parts ranging in price from $1.90 to $642.99, you’re sure to find everything you need for your 1995 BMW 325is.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 9 different brands like Walker, BRExhaust, and Vaico. 1995 BMW 325is Exhaust Parts start as low as $1.90!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 2 extensive product reviews on 1995 BMW 325is Exhaust Parts.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1995 BMW 325is below to get started!
Top-Rated Exhaust Parts Brands For Your 1995 BMW 325is
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1995 BMW 325is running right for years to come. In our inventory you’ll find brands like Walker, BRExhaust, Vaico, and even more.
Popular Walker Exhaust Parts
You’ll find popular Walker brand products across Catalytic Converters and Exhaust Pipes. All are waiting to get your 1995 BMW 325is back on the road. Some of the top-rated Walker products in these categories are:
from
$5.49
(1)
3 Bolt Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
FAQs for 1995 BMW 325is Exhaust Parts
What are the most purchased Exhaust Parts for the 1995 BMW 325is?
Out of 21 Exhaust Parts for the 1995 BMW 325is, the most popular in our inventory are:
