1995 BMW 318ti Differentials

Essential 1995 BMW 318ti Differentials

Corteco – Diff. Side Cover Sea (Part No.J7041108125CFW)

Diff. Side Cover Sea

from

$14.85
Diff. Side Cover Sea

Whiteline – Rear Diff Mount Insert (Part No.KDT969)

Rear Diff Mount Insert

from

$21.99
Whiteline’s differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.

Product Features:
  • Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Internal grease reservoirs provide continual self-lubrication for optimum friction management.
See More

Whiteline – Differential Front Mount Bushing (Part No.W92623)

Differential Front Mount Bushing

from

$28.99
Whiteline’s differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.

Product Features:
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Specially bonded design for optimised strength typically required in high load bearing applications.
See More

SKF – Differential Pinion Bearing (Part No.J702012211SKF)

Differential Pinion Bearing

from

$46.55
Differential Pinion Bearing

Driveworks – Taper Bearing Cone (Part No.S-HM-88649)

Taper Bearing Cone

from

$19.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Driveworks – Taper Bearing Cone (Part No.S-M-86649)

Taper Bearing Cone

from

$8.79
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

NTN – Differential Bearing (Part No.J7060741150NTN)

Differential Bearing

from

$39.02
Differential Bearing

Rein – Differential Plug (Part No.HWP0065)

Differential Plug

from

$7.99
Rein Automotive OE quality oil drain plugs are made with premium materials and designed and manufactured to be direct-fit replacements. Rein oil drain plugs are designed to tight tolerances to ensure proper sealing.

Product Features:
  • Designed to tight tolerances to ensure proper sealing.
  • Rein Oil Drain Plugs are coated for high corrosion resistance.
  • Designed and constructed to strict engineering quality standards.
  • Includes copper sealing gasket.
See More

National – Shaft Repair Sleeve (Part No.99157)

Shaft Repair Sleeve

from

$37.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Corteco – Pinion Seal (Part No.J7010426125CFW)

Pinion Seal

from

$16.18
Pinion Seal

Original Equipment – DIFFERENTIAL DRAIN P (Part No.J7065433208OEA)

DIFFERENTIAL DRAIN P

from

$7.39
DIFFERENTIAL DRAIN P

Valvoline – Import Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.820681)

Import Multi-Vehicle Automatic Transmission Fluid, 1 Gallon

from

$36.99
Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON®, GM DEXRON®-II and DEXRON®-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III , Toyota/Lexus Type T, T-III and T-IV , Honda/Acura ATF-Z1 (except in CVTs) , Mercedes Benz NAG1 , Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Valvoline – VAL EP ATF 6/1 QT (Part No.899179)

VAL EP ATF 6/1 QT

from

$14.99
VAL EP ATF 6/1 QT

Idemitsu – Type HP Automatic Transmission Fluid – 1 qt (Part No.30040099-75000C)

Type HP Automatic Transmission Fluid - 1 qt

from

$13.79
Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
  • Advanced anti-wear technology provides maximum protection to gears and bearings
See More

APA/URO Parts – Differential Mount (Part No.J7070442894APA)

Differential Mount

from

$58.57
Differential Mount

1995 BMW 318ti Differentials

Maybe you’re in the middle of a full rebuild of that 1995 BMW 318ti. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 14 different Differentials in our inventory ranging from $7.39 to $58.57. That means you can find the exact parts or products you need to keep that 1995 BMW 318ti running smoothly.

Differentials are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1995 BMW 318ti. Valvoline, DriveWorks, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1995 BMW 318ti, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Differentials to keep your 1995 BMW 318ti rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1995 BMW 318ti Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1995 BMW 318ti demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your 318ti the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 1995 BMW 318ti Differentials

What are the most purchased Differentials for the 1995 BMW 318ti?

Out of 14 Differentials for the 1995 BMW 318ti, the most popular in our inventory are:
Shaft Repair Sleeve
from $37.49
(1)
Shaft Repair Sleeve
Differential Pinion Pilot Bearings
Taper Bearing Cone
from $8.79
This product is not rated
Taper Bearing Cone
Front Differential Pinion Bearings
Taper Bearing Cone
from $19.29
This product is not rated
Taper Bearing Cone
Front Differential Pinion Bearings