1994 Toyota Camry Ignition and Tune-Up Products

Below you will find various in-demand Toyota Ignition and Tune-Up Products, components and accessories for your 1994 Camry. Advance Auto Parts has popular Camry parts like Spark Plugs, Ignition Coils and Boots, Ignition Wires and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other Camry model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 1994 Toyota Camry Ignition and Tune-Up Products below and start saving instantly.

Popular 1994 Toyota Camry Ignition and Tune-Up Products Categories

Ignition Knock (Detonation) Sensor Kits

Ignition Switch Bulbs

Standard Spark Plug Wires

Knock Sensors

Distributor Cap Kits

Ignition Module and Controls

Distributor Rotor Buttons

Ignition Starter Switches

Spark Plug Tube Seals

Spark Plug Non-Foulers

Distributor O-Rings

Ignition Capacitors

Distributor Mount Gaskets

Essential Ignition and Tune-Up Products for 1994 Toyota Camries

from

$181.99

The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock or detonation to alter the ignition timing and prevent detonation. A piezoelectric crystal generates a varying voltage based upon engine vibration intensity to delay ignition timing to help prevent severe and costly engine damage. Reasons for replacement include check engine light illumination, engine hesitation, poor fuel economy or failed emissions test.

Product Features:

ADVANCED TECHNOLOGY: Manufactured to operation performance standards to meet or exceed OE fit, form, and function to ensure proper ignition timing.
INSTALLATION AND SUPPORT: Mounting threads, harness length and wire gauge match OE for easy, worry free installation.
THE DIFFERENCE: Reinforced components are used to reduce the chance of part failure and prevent corrosion and moisture penetration. Shielded harness prevents electrical interference.

from

$9.99

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$23.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$7.99

Product Features:

PREMIUM GRADE SILICONE: Designed to withstand harsh environments
OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
LIMITED WARRANTY: See package for details

from

$23.99

NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Most Laser Iridium spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs
Superior Durability: The iridium-tipped center electrode is six times harder than platinum, ensuring long-lasting performance.
High-Quality Materials: Constructed with high-grade pure alumina ceramic and a 98% pure copper core to prevent overheating and ensure reliable starts.
OE Application Specific: Engineered specifically for Original Equipment (OE) applications, meeting the highest standards for quality and durability.
Even Wear: Features a platinum pad on the ground electrode for even wear, particularly beneficial in distributorless ignition systems.

from

$88.99

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees Celsius, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
LIMITED WARRANTY: See package for details

from

$68.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$4.29

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$253.99

Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new unit with no core charges
Precision machined shafts result in high speed accuracy and help prevent bearing failures
Every distributor is tested to ensure reliable and long-lasting performance
O-rings or gaskets included where applicable
Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
Original Equipment Equivalent high voltage ignition coils.
100% New Components and fasteners eliminate premature failures.

from

$228.99

Designed to meet or exceed OE specifications for fit, form and function
100% new unit with no core charges
Precision machined shafts result in high speed accuracy and help prevent bearing failures
Every distributor is tested to ensure reliable and long-lasting performance
O-rings or gaskets included where applicable
Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
Original Equipment Equivalent high voltage ignition coils.
100% New Components and fasteners eliminate premature failures.

from

$23.99

Upgrade your vehicle with ZEVO® LED miniature bulbs for added style, performance, and the many benefits of LEDs. Instantly enhance the interior and exterior lighting applications of your vehicle with a modern bright white light for head-turning style and increased visibility by other motorists. Easy-to-install with a robust design and high-quality components, ZEVO replacement bulbs are backed by a limited warranty to provide exceptional performance through the life of the vehicle. Also available in an array of colors to update your car or truck.

Product Features:

HIGH EFFICIENY: Delivers greater clarity with less power consumption and longer bulb life when compared to standard incandescent bulbs
RELIABLE: Thermal management to maximize life, matched with robust design that withstands temperature and shock for optimal performance
NON-POLARITY DESIGN: Plug & play easy installation; SYLVANIA ZEVO LED bulbs light on two sides and can be installed either direction
INSTANT ON: Provide full brightness instantly, giving drivers around you more time to react, compared to the slower light-up with Incandescent bulbs
BRIGHT WHITE LIGHT: Ideal for use in Daytime running lights (DRL), back up/reverse, map, dome, trunk, cargo and license plate light bulb replacement
HYPERFLASH: For some vehicles, installing a load equalizer may be required to eliminate hyper flash or dashboard error messages
EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color.
SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application.
TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

from

$6.49

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$10.79

An Ignition Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The ignition capacitor may also be called a radio capacitor or condenser used in electrical devices which may be susceptible to voltage spikes.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$73.99

Check engine light on and vehicle running rough? Could be a failed knock sensor. This ignition knock sensor kit combines both necessary sensors and the wiring harness that joins them for a complete repair in one package.

Product Features:

Complete solution – this knock sensor kit includes two knock sensors and the wiring harness that connects them
Plug-and-play installation – matches original wiring harness, requiring no cutting or splicing
Quality assured – benchmarked against original components for performance and quality
Excellent value – original equipment quality at significant cost savings

from

$192.99

Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$73.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$268.99

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

OE quality replacement parts for the right fit, form and function

from

$512.99

CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:

CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.

from

$781.99

The ignition control module controls the primary side of the ignition coil and in some applications is able to control ignition timing. The ignition control module receives a signal from a pick-up coil located in the distributor or from the engine control module (ECM) to identify piston location.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$35.49

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$88.99

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$50.99

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$10.05

The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts – parts that are unrivaled for quality, original look, fit, form & function, as well as coverage.

Product Features:

Integrated A/D converter and digital signal processing with a dynamically adaptive switch point improves accuracy and operation
Advanced circuitry protects the system from stray electro-magnetic fields and power spikes
Custom magnetic circuit programming calibrates the sensor while performance testing for improved timing accuracy between the target wheel and sensor output
Capitalizing on decades of research and development, our distributor caps and rotors contain unmatched quality yielding superior performance
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$11.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$12.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$26.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

Upgrade your 1994 Toyota Camry with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1994 Toyota Camry, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Camry functioning at its best. At Advance Auto Parts, we offer a wide selection of 65 Ignition and Tune-Up Products for the 1994 Toyota Camry, designed to meet your needs without breaking the bank. From Spark Plug replacements to Ignition Coils and Boots upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 1994 Toyota Camry at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $3.49 to $781.99, with an average price of $50.11. Our 65 Ignition and Tune-Up Products in stock come from 15 trusted brands, so you’re sure to find the right part for your 1994 Toyota Camry without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1994 Toyota Camry, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like NGK, Champion, Carquest Premium, and more. NGK Ignition and Tune-Up Products start at just $7.49 and boast an impressive 4.8 stars average rating from customers. Champion and Carquest Premium also bring quality to the table, with Ignition and Tune-Up Products available starting at $4.99, and at an average 4.7 stars rating. With 9,072 customer reviews and counting, our 1994 Toyota Camry Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1994 Toyota Camry is always ready to roll. We’re committed to providing you with everything you need to keep your Camry in top shape, all in one place. Start shopping confidently below for your 1994 Toyota Camry!

Best-Selling Spark Plugs for 1994 Toyota Camries

Enhance the driving experience in your Toyota with 30 quality Spark Plug components, starting at $3.49.

show more show less

from

$13.99

Engineered to meet the highest OE standards for performance, durability, and emissions, this Iridium Long-Life Spark Plug is a game-changer for your vehicle’s ignition system. Featuring DENSO’s patented Iridium Alloy with a 90% Iridium fine wire center electrode and a platinum ground electrode, it delivers exceptional spark performance and longevity, lasting up to three times longer than conventional plugs. The 360-degree laser welding process ensures a robust bond and structural integrity, even under extreme conditions exceeding 4,000 Deg F. Designed for sustained performance over 100,000 miles, it enhances engine efficiency, providing more horsepower, quicker starts, and fewer misfires under heavy loads. Additionally, its advanced design promotes better fuel efficiency, making it a cost-effective choice for long-term use. With a flat seat type and premium materials, this spark plug is built to endure and optimize your driving experience.

Product Features:

Latest OE technology with DENSO’s patented Iridium Alloy (90 percent Ir) and fine wire center electrode
Platinum ground electrode for extended life
DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
Sustained spark performance over 100,000 miles
Lasts up to three times as long as conventional plugs
Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
Iridium Long Life
Enhanced Engine Performance: Enjoy more horsepower, faster and easier starts, and fewer misfires under heavy loads, thanks to the advanced properties of DENSO’s Iridium alloy.
Fuel Efficiency: The DENSO Iridium Long Life plug helps in better conservation of fuel, making it an economical choice for long-term use.

from

$8.49

NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency

Product Features:

SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs

from

$14.99

NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered c

Product Features:

SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs

from

$7.49

NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal

from

$17.99

Often specified as original equipment, NGK Laser Iridium spark plugs are the best combination of performance and longevity. Iridium tip is six (6) times harder than platinum providing the strongest ignitability and the longest life possible. Most Laser Iridium spark plugs feature a platinum pad on the ground electrode for even wear in DIS ignition systems. OE engineered for specific vehicle applications.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs
High-Grade Pure Alumina Ceramic: Prevents overheating and ensures reliable starts, enhancing overall engine performance.
Platinum Pad on Ground Electrode: Ensures even wear in distributorless ignition systems, contributing to consistent performance.

from

$6.99

NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
Triple Gasket Sealing: Prevents combustion gas leakage, ensuring efficient engine performance.

from

$13.99

The Iridium Power Spark Plug features the world’s smallest Iridium Center Electrode at just 0.4mm, delivering unmatched spark precision for maximum combustion efficiency. Engineered with a patented 360-degree laser welding assembly process, this spark plug ensures exceptional durability and reliability under extreme conditions, withstanding temperatures exceeding 4000 Deg F. Its U-groove and taper-cut ground electrode design optimizes flame propagation, enhancing overall engine performance. The burnished nickel plating provides superior resistance to high temperatures and corrosion, ensuring long-lasting performance. Designed with a flat seat type and crafted from premium iridium material, this spark plug is built to deliver consistent energy and durability. With a wide range of part numbers available, it is compatible with thousands of applications, including classic and collector cars. Choose this spark plug for a perfect blend of cutting-edge technology, durability, and performance.

Product Features:

World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
Patented 360-degree laser welding assembly process
U-groove and taper cut ground electrode to maximize flame propagation.
Withstands temperatures greater than 4000 degree Fahrenheit
Burnished nickel plating for high temperature endurance and superior corrosion resistance
Wide range of part numbers for thousands of applications, including classic and collector cars
Iridium Power

from

$9.29

The Double Platinum Power Spark Plug (RC10PLPB4) is engineered for enhanced ignitability and long-lasting durability, making it a premium choice for reliable engine performance. Featuring a fine-wire platinum center electrode and a platinum pad ground electrode, this spark plug ensures greater wear resistance and a sharper, more focused spark. The innovative Heat-Active alloy allows the electrodes to maintain an optimal operating temperature under all engine loads, ensuring consistent performance and efficiency. Its V-trimmed ground electrode design further enhances spark focus, while the resistor type construction minimizes electrical interference. Designed as a standard replacement with a flat seat type, this spark plug is built to deliver powerful performance and maintain stable operation, making it an excellent choice for drivers seeking durability and precision in their ignition system.

Product Features:

Double Platinum Power – Premium Spark Plug. More Powerful Performance.
Platinum center and ground electrode for greater wear resistance
Maintains stable operating temperature under all engine loads
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active alloy allows electrodes to reach optimal temperature

from

$4.99

Champion Platinum Power spark plugs are engineered to deliver exceptional performance and durability, making them a reliable choice for your vehicle. Featuring a platinum center electrode, these spark plugs ensure long-lasting performance and resistance to wear, maintaining the proper gap specification throughout their lifespan. The fine-wire center electrode enhances ignitability, while the V-trimmed ground electrode sharpens spark focus for optimal combustion. Constructed with the exclusive Heat-Active alloy, these plugs quickly reach and maintain the ideal operating temperature, ensuring consistent performance under various driving conditions. Designed as a standard replacement, they incorporate a nickel ground electrode tip and a resistor for enhanced functionality. Whether you’re looking for improved ignition efficiency or extended service life, these spark plugs provide excellent value and reliability for your engine.

Product Features:

Platinum Power- Premium Spark Plug. Powerful Performance.
Platinum center electrode for long life
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active alloy allows electrodes to reach optimal temperature
Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug
Platinum Center Electrode: The Champion Platinum Power Spark Plug features a platinum center electrode for extended durability and long-lasting performance.

from

$10.99

ACDelco Gold (Professional) Double Platinum Spark Plug are a high quality alternative to Original Equipment (OE) parts. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

from

$12.99

The Double Platinum Spark Plug is engineered to meet the highest OE standards for performance, durability, and emissions compliance. Featuring OE-grade platinum on both the center and ground electrodes, it ensures superior thermal conductivity and sustained spark performance for over 60,000 miles. Its premium shell construction with machine-rolled threads enhances durability and provides a secure fit, while the flat seat type ensures optimal compatibility. Designed to reduce secondary required voltage and increase ignition efficiency, this spark plug delivers reliable performance that minimizes shop comebacks and maximizes customer satisfaction. With its double platinum design, it offers exceptional longevity and consistent ignition, making it a dependable choice for maintaining your vehicle’s peak performance.

Product Features:

OE grade platinum on both center and ground electrodes
Premium shell construction with machine-rolled threads
Superior thermal conductivity
Sustained spark performance over 60,000 miles
Reduced secondary required voltage, increased ignition efficiency
Satisfied customers, reduced shop comebacks
Double Platinum

from

$6.99

Champion Double Platinum Power spark plugs are engineered to deliver exceptional performance and durability for your vehicle. Featuring a platinum fine-wire center electrode and a platinum pad ground electrode, these spark plugs ensure greater wear resistance and sharper spark focus for reliable ignition. The Heat-Active alloy optimizes electrode temperature under all engine loads, maintaining stable operation and enhancing overall efficiency. With a V-trimmed ground electrode design, these spark plugs promote precise spark delivery for improved ignitability. As an OE replacement, they are designed to seamlessly fit your vehicle, offering compatibility and dependable performance. Whether you’re seeking enhanced durability or more powerful ignition, these spark plugs are built to meet the demands of modern engines while providing long-lasting value.

Product Features:

Double Platinum Power – Premium Spark Plug. More Powerful Performance.
Platinum center and ground electrode for greater wear resistance
Maintains stable operating temperature under all engine loads
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active alloy allows electrodes to reach optimal temperature
OE Replacement: Designed as an OE replacement, ensuring compatibility and reliable performance for your vehicle.

from

$12.99

Experience the perfect blend of durability and high performance with this spark plug, designed to deliver exceptional power and torque. Featuring a 0.4mm Iridium Center Electrode – the world’s smallest diameter – it maximizes firing potential, while the 0.7mm Needle Tip Ground Electrode enhances spark energy and minimizes heat quenching. Built with DENSO’s patented Iridium-Rhodium alloy formula, it boasts the highest concentration of Iridium for unmatched durability, enduring temperatures over 4000 Deg F. The advanced 360-degree laser welding process ensures a robust bond and structural integrity, while the Twin-Tip Technology combines a fine wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode for superior ignition. With over 100,000 miles of reliable performance, this plug enhances fuel economy, reduces emissions, and is crafted from premium materials for long-lasting endurance. Its flat seat type design further optimizes performance, making it a top-tier choice for drivers seeking ultimate efficiency and power.

Product Features:

0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
Durability of an OE style plug combined with Power and Torque of high performance.
Withstands temperatures greater than 4000 degree Fahrenheit
Iridium TT
Ultimate Endurance and Power: The DENSO Iridium TT Spark Plug features a 0.7mm Iridium Tip, ensuring over 100,000 miles of uncompromised performance.
Advanced Twin-Tip Technology: Developed from Original Equipment Specification Super Ignition Plug (SIP) design, combining a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode.
Enhanced Fuel Economy and Lower Emissions: Drive around the Earth over 4 times with improved fuel efficiency and reduced emissions.
Premium Materials: Features an Iridium Center Electrode Tip and a Flat Seat Type for optimal performance and durability.

from

$10.99

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:

0.6 mm finewire design improves ignitability
Patented V-trimmed platinum sidewire technology resists wear
OE equivalent design is engineered for every engine
Designed for better overall durability with virtually no gap erosion
Double Iridium-Enhanced Alloy Technology Center Electrode: Offers improved durability and wear resistance for a longer-lasting spark plug.
Designed and Engineered in the USA: Reflects over 100 years of Autolite’s engineering experience and expertise.
Gasket Seat Type: Ensures a secure and proper fit for optimal performance.

from

$4.99

Autolite Platinum spark plugs are crafted for superior performance and durability, making them ideal for older engine applications. Featuring a platinum center electrode firing tip, these spark plugs ensure quicker firing, smoother starts, and enhanced acceleration while boosting fuel efficiency. The platinum firing tip resists gap erosion, extending service life, while the high alumina ceramic insulator offers excellent thermal conductivity and insulation for added strength. A multi-rib insulator prevents flash-over, and the nickel-plated shell resists corrosion for long-lasting reliability. Designed with a flat gasket seat type, these spark plugs provide a secure seal for optimal engine performance. With a mid-projection standard center electrode and nickel ground electrode tip, they deliver consistent performance for demanding conditions. Perfect for performance-grade applications, these spark plugs combine advanced materials and engineering to ensure your engine runs smoothly and efficiently.

Product Features:

Engineered with a platinum firing tip that prevents gap erosion for longer service life.
Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
The multi-rib insulator prevents flash-over.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
Gasket Seat Type: Equipped with a gasket seat type, these spark plugs provide a secure and effective seal for optimal engine performance.

from

$3.99

Autolite Copper spark plugs are designed to provide reliable performance and quick starts, making them an essential choice for maintaining your vehicle’s efficiency. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, ensuring consistent operation. The high nickel alloy center and ground electrodes are engineered for extended life, while the high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation strength. With a nickel-plated shell, these plugs resist corrosion, offering durability for long-term use. The mid-projection standard center electrode design, combined with nickel tip materials, ensures optimal spark delivery. Designed with a gasket seat type and equipped with a resistor, these spark plugs meet regular-grade specifications, making them a dependable option for a wide range of applications.

Product Features:

The copper core center electrode aids in thermal control and improves resistance to fouling.
Its specially engineered high nickel alloy center and ground electrode provides extended life.
The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
The mid-projection standard center electrode design ensures precise spark delivery for consistent engine performance.

from

$6.99

Autolite Double Platinum spark plugs are engineered for exceptional durability and performance, making them an ideal choice for distributor-less ignition system (DIS) engines. Featuring a platinum-to-platinum design, these spark plugs effectively prevent gap erosion, reduce misfires, and extend service life. The yttrium-enhanced ground electrode ensures superior heat transfer, allowing the plugs to withstand high temperatures and pressures for greater longevity. A high alumina ceramic insulator provides optimal thermal conductivity and dielectric strength, while the multi-rib insulator design prevents flash-over for reliable operation. With a mid-projection center electrode and platinum tips on both the center and ground electrodes, these plugs deliver consistent performance and efficiency. Backed by over a century of engineering expertise and a legacy of over 11 billion plugs sold, Autolite guarantees proven quality and reliability. Designed for performance-grade applications, these spark plugs are a smart upgrade over copper and standard platinum options, ensuring your engine runs smoothly and efficiently.

Product Features:

Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
The multi-rib insulator prevents flash-over.
Proven Quality: Backed by over 100 years of engineering expertise and over 11 billion plugs sold, Autolite delivers exceptional quality and performance.

from

$8.49

The Premium DiamondFire Automotive Spark Plug is engineered to deliver peak performance and efficiency for your vehicle. Featuring E3’s patented Diamond Fire edge-to-edge ground electrode, it ensures a faster, more complete burn for smoother acceleration and idle. The innovative “diamond-shaped” side wire electrode enhances combustion by igniting the air/fuel mixture more quickly, resulting in a larger flame kernel and improved power output – up to 6% on average. Designed with nickel center and ground electrode tips, this spark plug offers durability and consistent performance. Its cleaner-burning combustion reduces engine carbon deposits and promotes fuel savings, making it an eco-friendly choice. Pre-gapped at the factory for hassle-free installation, this spark plug is a perfect blend of advanced technology and convenience, ensuring your engine runs at its best.

Product Features:

E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
The Spark Plugs are pre-gapped at the factory and cannot be adjusted.

from

$7.99

ACDelco Gold (Professional) RAPIDFIRE Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These RAPIDFIRE Single Platinum Performance Spark Plugs are designed for everyday use and are a high quality replacement for many vehicles on the road today. These premium aftermarket spark plugs have high-quality suppressors that help prevent misfiring, an improved plug to boot seal, and a pure copper core for greater durability. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

Solid state suppressor, with two-piece glass and brass seal, can help reduce radio frequency interference, regulates spark energy for long electrode life, and helps protect against high combustion pressures
Pure copper core provides great heat transfer and helps maximize plug durability
Platinum on center electrode enables superior spark characteristics and can reduce voltage requirements of the ignition system
Ribless insulator helps optimize plug to boot seal
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

from

$18.99

NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applica

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs

from

$4.99

Copper Plus Spark Plug RC12YC5 is engineered for dependable performance and durability, making it a reliable choice for maintaining your engine’s efficiency. Featuring a copper core center electrode, it delivers enhanced conductivity and precise heat control, ensuring good overall wear and extending the spark plug’s lifespan. The nickel center electrode tip and flat seat design further contribute to consistent and reliable performance, while superior corrosion resistance ensures long-term durability. Built to ISO and SAE Standards, this spark plug meets rigorous quality benchmarks for proven performance. As a standard replacement grade, it is designed to provide accurate heat range control, making it ideal for maintaining optimal engine functionality. Whether you’re looking for enhanced heat management or reliable ignition, this spark plug offers exceptional value and performance.

Product Features:

Copper Plus – Dependable Performance and Durability
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance
Built to ISO and SAE standards for proven performance
Enhanced Conductivity and Heat Control: The copper core electrode provides increased conductivity and heat control, ensuring good overall wear and extending the spark plug’s life.
Reliable Nickel Center Electrode Tip: Featuring a nickel center electrode tip and flat seat type, this spark plug ensures consistent and reliable performance, contributing to the overall efficiency of your engine.

from

$3.99

The Platinum TT Spark Plug with its advanced twin-tip design ensures faster flame propagation for more complete combustion, enhancing ignition performance and efficiency. Featuring a platinum center electrode, it delivers excellent conductivity and durability, while the titanium-enhanced ground strap ensures superior performance and extended lifespan. The flat seat type provides a secure fit, making it compatible with a variety of vehicles. Designed for reliability and longevity, this spark plug is a dependable choice for maintaining consistent engine performance. Its high-quality materials and innovative design make it a valuable addition to your vehicle’s ignition system.

Product Features:

Platinum Twin-Tip Design: Features a platinum twin-tip design for enhanced ignition performance and efficiency.
Titanium-Enhanced Ground Strap: Equipped with a titanium-enhanced ground strap, ensuring superior performance and longevity.
High-Quality Platinum Center Electrode: The center electrode tip is made from high-quality platinum, providing excellent conductivity and durability.
Superior Performance and Longevity: Designed to deliver superior performance and extended lifespan, making it a reliable choice for your vehicle’s ignition needs.
Flat Seat Compatibility: The flat seat type ensures a secure and precise fit, making it suitable for a wide range of vehicle applications.

from

$9.99

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$26.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

Most Popular 1994 Toyota Camry Ignition Coils and Boots

Customize your Toyota with 7 Ignition Coils and Boots products like Ignition Coils and Ignition Coil Boots, all priced under $151.99.

show more show less

from

$39.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$40.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$84.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$72.99

Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

from

$151.99

Product Features:

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to insert power into spark plugs to ensure fast starts, consistent engine performance and optimized fuel efficiency
Delphi uses smart winding process techniques to controls wire lengths, keeping voltage the same
We manufacture our ignition coils with a high quality wire coating that resists imperfections that lead to failure

from

$120.19

ORIGINAL EQUIPMENT QUALITY and HERITAGE NGK Coil-On-Plug or Pencil Coil designs provide energy for a single spark plug and requires as many coils as there are cylinders. NGK ignition coils, like our spark plugs, are manufactured to OE standards for the highest durability and operational performance, so they can be installed with OE confidence. Our coil designs are developed and proven tough in our ISO 17025 accredited test lab at extreme conditions that are far beyond any operational environment that a vehicle would experience.

Product Features:

OE-Equivalent and a direct fit application
Meets or exceeds the OE specifications for durability and performance
High profile insulation to prevent arching
Radio-Frequency Interference (RFI) Suppression
Engineered to withstand extremes in temperatures

from

$11.99

Carquest Premium spark plug boots are engineered to restore ignition boot reliability and performance. They are designed to meet or exceed original equipment (O.E.) specifications for fit, form and function. Our spark plug boots offer excellent heat resistance as well as maximum protection against spark loss. Carquest Premium spark plug boots are built with a durable silicone compound for resistance to high heat and abrasion, resulting in a longer-lasting ignition repair.

Product Features:

Product Features:

OE design provides an exact fit for your application
Provides excellent heat resistance as well as maximum protection against spark loss
Durable silicone compound for resistance to high heat or abrasion
Spring included with the spark plug boot
Design for direct compatibility
Multipack provides one time replace all COP for better deal

Top Picks for 1994 Toyota Camry Ignition Wires

Upgrade Toyota Camries with top-quality Ignition Wires parts, including 1 OEM and aftermarket selections for your 1994 model.

show more show less

from

$68.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

In-Demand Distributors for 1994 Toyota Camries

Select from 14 premium Distributors parts for your 1994 Toyota Camry, with prices ranging from $3.99 to $284.99.

show more show less

from

$4.05

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$275.99

Designed to meet or exceed OE specifications for fit, form and function
100% new unit with no core charges
Precision machined shafts result in high speed accuracy and help prevent bearing failures
Every distributor is tested to ensure reliable and long-lasting performance
O-rings or gaskets included where applicable
Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
Original Equipment Equivalent high voltage ignition coils.
100% New Components and fasteners eliminate premature failures.

from

$6.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$10.05

Integrated A/D converter and digital signal processing with a dynamically adaptive switch point improves accuracy and operation
Advanced circuitry protects the system from stray electro-magnetic fields and power spikes
Custom magnetic circuit programming calibrates the sensor while performance testing for improved timing accuracy between the target wheel and sensor output
Capitalizing on decades of research and development, our distributor caps and rotors contain unmatched quality yielding superior performance
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$12.05

Intermotor is a complete engine management import line that includes ignition and electrical relays, switches and sensors with a concentration on high technology categories such as computerized engine controls, fuel injection, and emission controls with coverage for every part number with an import nameplate. Intermotor parts are unrivalled for quality, original fit, form, function, and coverage providing a genuine import part in every box. Intermotor is the import leader by design.

Product Features:

High dielectric-strength engineering polymer prevents breakdown or arcing and ensures long life
Solid brass segment resists pitting and erosion for extended life
Utilizes shaft retention clips for proper distributor shaft fit
Noise-suppressing coating on segment prevents electrical interference with radio and other electronic circuits

from

$11.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$10.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$19.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$3.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$25.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$284.99

Designed to meet or exceed OE specifications for fit, form and function
100% new unit with no core charges
Precision machined shafts result in high speed accuracy and help prevent bearing failures
Every distributor is tested to ensure reliable and long-lasting performance
O-rings or gaskets included where applicable
Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
Original Equipment Equivalent high voltage ignition coils.
100% New Components and fasteners eliminate premature failures.

from

$23.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$18.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$4.29

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Most Sold 1994 Toyota Camry Ignition Boots

Explore our best-selling Toyota parts for the 1994 Camry among 2 OEM and aftermarket options starting from $62.99.

show more show less

from

$62.99

CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$68.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

Top-Rated Ignition and Tune-Up Products Brands For Your 1994 Toyota Camry

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 1994 Toyota Camries. Below you’ll find some of our best rated Ignition and Tune-Up Products from NGK, Champion, and Carquest Premium, and more. Ignition and Tune-Up Products from these brands that fit a 1994 Camry start at just $4.99 and are rated as high as 4.8 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular NGK 1994 Toyota Camry Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1994 Toyota Camry, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. NGK ticks all of those boxes. We offer a wide selection of NGK Ignition and Tune-Up Products, specifically designed for the 1994 Toyota Camry. With over 3 NGK brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.49, with an average price of just $10.32. Plus, with over 351 customer reviews and an average rating of 4.8 stars, you can trust that our NGK Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $14.99

(113)

Iridium IX Spark Plug (BKR6EIX-11): Enhanced Ignitability & Durability

“Ayuda al motor mas fuerza”

from $7.49

(86)

V-Power Nickel Spark Plug (BKR6E-11): Reliable Ignitability & Performance

“Came pre gapped out of the box.”

from $8.49

(152)

G-Power Platinum Spark Plug (BKR6EGP): Enhanced Durability & Efficiency

“Great spark plugs for import/ Toyota engine”

Popular Champion 1994 Toyota Camry Ignition and Tune-Up Products

Champion auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 1994 Toyota Camry owner should feel confident when installing genuine Champion parts in their vehicle. To ensure the best fit and performance for your 1994 Camry, Advance Auto Parts carries a full inventory of 3 Champion Ignition and Tune-Up Products. Plus you will be keeping your Toyota in peak condition while saving money because prices on these Champion Ignition and Tune-Up Products range from $4.99 to $9.29, plus, with more than 20 customer reviews and an impressive 4.7 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from $6.99

(2)

Double Platinum Power Spark Plug (RC12PYP): Enhanced Durability & Performance

“Go with double plat to protect both contacts–get 5 yr warr too plus 100,000 mi rating.”

from $4.99

(5)

Platinum Power Spark Plug (RC12PYC): Powerful Performance & Durability

“Advance Auto had the part I needed. Not every auto store carries these spark plugs. Website allowed me to know in advance that they had the part in st”

from $9.29

(13)

Double Platinum Power Spark Plug (RC10PLPB4): Enhanced Ignitability & Durability

“Good plugs!”

FAQs for 1994 Toyota Camry Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 1994 Toyota Camries?

Out of 65 Ignition and Tune-Up Products that fit 1994 Toyota Camries, the following parts are the top sellers:

Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition (15650192) – $10.99
Platinum Spark Plug: Enhanced Durability & Improved Performance (12013889) – $4.99
G-Power Platinum Spark Plug (BKR6EGP): Enhanced Durability & Efficiency (20650261) – $8.49

What’s the price range for 1994 Toyota Camry Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 1994 Toyota Camry start at $3.49 and go up to $781.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 1994 Toyota Camry?

The average price for Ignition and Tune-Up Products for the 1994 Toyota Camry is $50.11. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Toyota Camry model years?

Yes, we currently carry Ignition and Tune-Up Products for 41 model years of Toyota Camries between 1983 and 2025. Ignition and Tune-Up Products are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Ignition and Tune-Up Products for my 1994 Toyota Camry?

The cheapest 1994 Toyota Camry Ignition and Tune-Up Products we carry in stock are:

U-Groove Spark Plug: OE Performance, K20R-U11 (20650387) – $3.49
Copper Resistor Spark Plug: Quick Starts & Reliable Performance (5394163) – $3.99
Distributor Rotor (12478632) – $3.99
Platinum TT Spark Plug with Twin-Tip Design for Enhanced Ignition (11010036) – $3.99
Distributor Rotor (10703794) – $4.05

What are the top-rated Ignition and Tune-Up Products that fit the 1994 Toyota Camry?

Out of 9,072 reviews by customers, our 1994 Toyota Camry Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 1994 Toyota Camry and their top-rated products:

Ignition Switches
- 194 ZEVO: White LED Mini Bulb, Super Bright, 2 Pack (11920742) – $23.99
Spark Plugs
- 194 ZEVO: White LED Mini Bulb, Super Bright, 2 Pack (11920742) – $23.99

What types of Ignition and Tune-Up Products do you sell for my 1994 Toyota Camry?

As of 11/2/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 1994 Toyota Camry:

Can I get help with 1994 Toyota Camry Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Ignition and Tune-Up Products and more.

What is your return policy for Toyota Camry Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Toyota Camry Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1994 Toyota Camry Ignition and Tune-Up Products

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0215)

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAC1807)

NGK – Direct Ignition Coil on Plug Boot: Premium Silicone (Part No.59009)

NGK – Laser Iridium Spark Plug (ILFR5T11): Fine Wire Tip for Precision (Part No.96779)

NGK – Spark Plug Wire Set: Superior EMI/RFI Noise Suppression (Part No.8916)

Carquest Premium – Spark Plug Wire Set: 5 Wires, Increased performance, Designed for direct fit (Part No.35-4099)

Victor Reinz – Distributor Mounting Gasket (Part No.41-76538-00)

Carquest Premium – Distributor T766: 100% New, With Cap and Rotor (Part No.T766)

Carquest Premium – Distributor T766A: 100% New, With Cap and Rotor (Part No.T766A)

Sylvania – 194 ZEVO: White LED Mini Bulb, Super Bright, 2 Pack (Part No.194LED.BP2)

Felpro – Distributor Mounting Gasket (Part No.72438)

Carquest Premium – Ignition Capacitor (Part No.GAA1118)

Dorman – Knock Sensor and Harness Kit (Part No.926-387)

Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 4 Count (Part No.EBC1828-4)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1409)

Delphi – Ignition Control Module (Part No.DS10064)

Carquest Premium – Ignition Module (Part No.CBG1072)

Carquest Premium – Ignition Control Module (Part No.CBC1227)

Carquest Premium – Ignition Switch (Part No.CSC1813)

Carquest Premium – Ignition Switch (Part No.CSC1595)

Carquest Premium – Ignition Switch (Part No.CSA1188)

Carquest – Distributor Rotor (Part No.D683)

Carquest Premium – Distributor Rotor (Part No.DAA1093)

Carquest Premium – Distributor Rotor (Part No.DAC1362)

Felpro – Spark Plug Tube Seal Set (Part No.ES 72701)

DENSO – Iridium Long-Life Spark Plug: OE Performance, SK20R11 (Part No.3297)

NGK – G-Power Platinum Spark Plug (BKR6EGP): Enhanced Durability & Efficiency (Part No.7092)

NGK – Iridium IX Spark Plug (BKR6EIX-11): Enhanced Ignitability & Durability (Part No.3764)

NGK – V-Power Nickel Spark Plug (BKR6E-11): Reliable Ignitability & Performance (Part No.2756)

NGK – Laser Iridium Spark Plug (IFR6T11): Superior Performance & Durability (Part No.4589)

NGK – Standard Nickel Spark Plug (BKR6ES-11): Reliable OE Performance (Part No.5553)

DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IK20 (Part No.5304)

Champion – Double Platinum Power Spark Plug (RC10PLPB4): Enhanced Ignitability & Durability (Part No.7436)

Champion – Platinum Power Spark Plug (RC12PYC): Powerful Performance & Durability (Part No.3071)

ACDelco – Double Platinum Spark Plug: Long-Lasting Performance & Durability (Part No.41-801)

DENSO – Double Platinum Spark Plug: OE Performance, lasts 60K+ Miles, PK20R11 (Part No.3128)

Champion – Double Platinum Power Spark Plug (RC12PYP): Enhanced Durability & Performance (Part No.7071)

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IK20TT (Part No.4702)

Autolite Iridium – Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP3923)

Autolite – Platinum Spark Plug: Enhanced Durability & Improved Performance (Part No.AP3923)

Autolite – Copper Resistor Spark Plug: Quick Starts & Reliable Performance (Part No.3923)

Autolite – Double Platinum Spark Plug: Enhanced Durability & Performance (Part No.APP3923)

E3 – DiamondFIRE Automotive Spark Plug: More Power & Fuel Efficiency (Part No.E3.56)

ACDelco – RAPIDFIRE Spark Plug: Enhanced Durability & Performance (Part No.5)

NGK – Laser Platinum Spark Plug (BKR6EP-11): High Ignitability & Longevity (Part No.2978)

Champion – Copper Plus Spark Plug (RC12YC5): Dependable Performance & Durability (Part No.89)

DENSO – Platinum TT Spark Plug with Twin-Tip Design for Enhanced Ignition (Part No.4504)

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)

Felpro – Spark Plug Tube Seal Set (Part No.ES 72701)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1523)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1636)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1736)

Delphi – Ignition Coil (Part No.GN10175)

Delphi – Ignition Coil (Part No.GN10694)

NGK – Direct Ignition Coil – (Coil on Plug) (Part No.F3000113669NGK)

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7035)

Carquest Premium – Spark Plug Wire Set: 5 Wires, Increased performance, Designed for direct fit (Part No.35-4099)

Driveworks – Distributor Rotor (Part No.23016)

Carquest Premium – Distributor T77429: 100% New, With Cap and Rotor (Part No.T77429)

Felpro – Distributor Mounting Gasket (Part No.72438)

Carquest – Distributor Rotor (Part No.D683)

Carquest – Distributor Rotor (Part No.D217)

Carquest Premium – Distributor Rotor (Part No.DAA1093)

Carquest Premium – Distributor Rotor (Part No.DAC1206)

Carquest Premium – Distributor Cap (Part No.CAC1548)

Carquest – Distributor Rotor (Part No.23A1014)

Carquest Premium – Distributor Cap (Part No.CAC1554)

Carquest Premium – Distributor T74426: 100% New, With Cap and Rotor (Part No.T74426)

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAC1807)

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAC1839)

Victor Reinz – Distributor Mounting Gasket (Part No.41-76538-00)

Carquest Premium – Spark Plug Wire Set (Part No.35-6051)

Carquest Premium – Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit (Part No.35-4082)