1994 Pontiac Firebird Air Intakes

Name: Bolt Kit Intake Hex Head
Brand: Spectre
SKU: 4652
Price: 9.99 USD

Below you will find various in-demand Pontiac Air Intakes, components and accessories for your 1994 Firebird. Advance Auto Parts has popular Firebird parts like Throttle Bodies & Carb Parts, Airboxes, Intake Manifold Parts and more. You’ll also find aftermarket and OEM Air Intakes for other Firebird model years including 1993, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 and more. Select a category of 1994 Pontiac Firebird Air Intakes below and start saving instantly.

Popular 1994 Pontiac Firebird Air Intakes Categories

Intake Manifolds

Intake Manifold Temperature Sensors

Throttle Position Sensors

Intake Manifold Gasket Sets

Intake Manifold Bolt Sets

Engine Air Duct Clips

Throttle Return Springs

Throttle Body Mounting Gaskets

Essential Air Intakes for 1994 Pontiac Firebirds

from

$9.99

Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.

Product Features:

Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
3/8 inch-16 by 1 inch bolts
Kit includes 12 bolts and washers
Manufactured from high quality steel
Bolts feature hex heads

from

$47.99

Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:

Nominally Rated At 170,000 PSI Tensile Strength
Precision Machined Threads For Secure Engagement, And Would not Rust
Wide Under Head Flange And Companion Washers Provide Even Load Distribution
Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
Facilitates Optimum Sealing Of Gasket Surfaces

from

$32.09

These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

Product Features:

Features 12-point Smaller-than-standard Bolt Head
Thick Flat Washers Distribute Optimum Clamp Load
Ideal Use Where Space Is Minimal On Race Manifolds
Bolts And Washers Zinc Plated For Protection
Zinc Plated For Protection

from

$59.99

ACDelco GM Original Equipment Throttle Position Sensors (TPS) are electrical sensors, and are GM-recommended replacements for your vehicle’s original components. They electronically inform the engine control module (ECM) of the throttle’s plate angle or position. These signals are then used to regulate the fuel and ignition system. These original equipment throttle position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Electronically informs the ECM of the throttle valve angle
Used to regulate the fuel and ignition system
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$232.99

Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$223.99

Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$9.99

This throttle return spring is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this throttle return spring matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this spring is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$18.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$25.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$35.99

ACDelco GM Original Equipment Multi Purpose Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$29.99

from

$356.99

Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.

Product Features:

Based on Performer RPM-Series with Unique Air Gap
Air Gap Cooler and Denser Mixture for More Power
Designed for 1500 to 6500 RPM Street-Driven Power
Dual-Plane High-Rise Intake
For Square Bore Carburetors Only

from

$267.99

2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Not for mileage or emissions applications. For trucks or vans use PN(2701) instead. Not for LT1 or Chevy bowtie heads. Not for 1987 and later stock aluminum heads. Available in cast or polished.

Product Features:

2500 to 6500 RPM High Performance Street Engines
Single-Plane Low-Rise Intake Good for High RPM
Ideal for Applications with Limited Hood Clearance
For Top-End HP and Adequate Throttle Response
Not for Mileage or Emissions Applications
For Trucks or Vans Use PN[2701] Instead
Not for LT1 or Chevy Bowtie Heads
Not for 1987 and Later Stock Aluminum Heads

from

$432.99

Product Features:

Best for the Ultimate in Street High-Performance
Designed for 1500 to 6500 RPM Street-Driven Power
Dual-Plane High-Rise Intake w/180 deg Firing Order
Produces Incredible Top-End Horsepower
Retains Good Throttle Response and Acceleration
Larger Plenum and Runners Maximizes Other Upgrades
Edelbrock Total Power Package Maximizes Gains

from

$409.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 deg. Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal if Correct Carburetor Used

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$9.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$4.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$21.74

FI Throttle Body Mou

from

$33.99

Product Features:

For Chevy 1957-86 302-327-350-400 S/B Tunnel Ram
For #7110
Includes Hardware
Multi Piece Configuration
Set of 5

from

$31.99

Mr. Gasket Ultra-Seal Intake Manifold Gasketss are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For original equipment replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

Product Features:

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Silicone beading on both sides of each gasket
Complete with manifold end seals and distributor gasket
For OE replacement, high performance street, drag race and oval track use

from

$33.89

ACDelco offers a full line of quality GM OE intake manifold gaskets that meet Original Equipment standards. When you’re in need of intake gaskets and gasket sets, look to ACDelco for quality, value and guaranteed performance. Validated by GM Engineering which assures proper form, fit and function. This is important on high labor-hour manifold repairs.

Product Features:

Both upper and lower intake manifolds with matching gaskets sets available.
Only ACDelco and GM offer complete later model GM coverage.
Design enhanced to incorporate updates, upgrades and Technical Service Bulletins (TSBs.)

from

$49.43

WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.

Product Features:

Original equipment design and quality
Head sets give you original equipment form, fit, and function
Utilizes OE equivalent or better materials in all head sets
Packaged in shrink wrapped tray
Every part you need to complete your gasket repair in one package unless otherwise stated

from

$0.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$3.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

Upgrade your 1994 Pontiac Firebird with Top-Quality Air Intakes

When it comes to maintaining or upgrading your 1994 Pontiac Firebird, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Air Intakes are key to keeping your Firebird functioning at its best. At Advance Auto Parts, we offer a wide selection of 27 Air Intakes for the 1994 Pontiac Firebird, designed to meet your needs without breaking the bank. From Throttle Bodies & Carb Part replacements to Airboxes upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 1994 Pontiac Firebird at great prices. Our Air Intakes inventory for this model ranges from just $0.99 to $782.99, with an average price of $60.17. Our 27 Air Intakes in stock come from 13 trusted brands, so you’re sure to find the right part for your 1994 Pontiac Firebird without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1994 Pontiac Firebird, we stock popular OEM and aftermarket Air Intakes from top names like ACDelco, Dorman, Mr. Gasket, and more. ACDelco Air Intakes start at just $35.99 and boast an impressive 5 stars average rating from customers. Dorman and Mr. Gasket also bring quality to the table, with Air Intakes available starting at $0.99, and at an average 4 stars rating. With 155 customer reviews and counting, our 1994 Pontiac Firebird Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1994 Pontiac Firebird is always ready to roll. We’re committed to providing you with everything you need to keep your Firebird in top shape, all in one place. Start shopping confidently below for your 1994 Pontiac Firebird!

Best-Selling Throttle Bodies & Carb Parts for 1994 Pontiac Firebirds

Enhance the driving experience in your Pontiac with 14 quality Throttle Bodies & Carb Part components, starting at $4.99.

show more show less

from

$4.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$41.49

Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:

Delphi sensors are built to meet or exceed OE requirements and testing
Not impacted by temperature changes and provide robust, long-lasting sensor protection
Designed digital output for maximum signal to noise ratio

from

$9.99

Direct replacement – this throttle return spring matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this spring is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$38.99

MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$49.99

ACDelco GM Original Equipment Throttle Position Sensor Kits come with the needed parts to replace your Throttle Position Sensor (TPS), and are GM-recommended replacements for your vehicle’s original components. The TPS reports the throttle position to the engine control module (ECM), which uses the signal to adjust fuel delivery and ignition timing. These original equipment throttle position sensor kits have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Provides information for correct fuel/air mixture
Designed to send accurate readings of the position of the throttle valve to the ECM to help provide excellent engine performance
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$39.99

Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$41.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
The Throttle Position Sensor (TPS) reports the angle of the throttle plate to the PCM for optimal engine operation under all engine load conditions.

from

$35.60

The Vemo Throttle Position Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$94.59

The ACDelco GM Original Equipment Throttle Position Sensor is a GM-recommended replacement for your vehicle’s original component. The TPS reports the throttle position to the engine control module, which uses the signal to adjust fuel delivery and ignition timing. This throttle position sensor kit meets the performance standards you would expect from General Motors.

Product Features:

Undergo the same stringent testing process as the original part
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$73.90

At last, make major improvements with a minimal amount of time, money, and energy. Dorman’s Throttle Position Sensor, attaches easily to the throttle body.

Product Features:

Includes all necessary hardware for a complete repair
This part has undergone a rigorous inspection to ensure high quality
Direct replacement for a proper fit every time
Trouble-free installation

from

$72.43

Delphi Digital Speed and Position Sensors are based on integrated adaptive threshold Hall effect technology. They sense the speed and position of a target created with various sense features that are machined, stamped, drawn, or magnetically encoded. They can sense speeds as low as zero RPM. Delphi Speed and Position Sensors feature silicon Hall sense elements. The sensor assembly uses proven design features and assembly processes to provide a reliable solution in demanding automotive environments. The sensor design is modular to enable re-use of proven components and to provide low risk package modifications for new applications. They utilize an adaptive threshold control scheme providing robust performance that improves the air gap capability and reduces the placement accuracy requirements between the sensor and the target. Delphi also offers designs that help protect the sensor from transients and from electromagnetic interference (EMI). Power can be provided by either battery or regulated voltage supplies, enabling even more controller flexibility. Delphi’s Digital Speed and Position Sensors can operate on conditioned voltage from 4.5 to 16 volts.

Product Features:

Modular design based on proven features and assembly processes provides rapid application optimization with flexible package geometry and high reliability
Three-wire open collector output, open drain output, or two-wire current output allow flexible controller design
Accurate square wave output eliminates square-up function in the controller
Transient protection helps protect against stray electro-magnetic fields interface
Various mounting applications provide choice of many existing designs, or custom designs
Adaptive Hall signal schemes provide improved timing accuracy, optimized sensor air gap and tilt sensitivity, and zero speed sensing capability
Single element option offers simplified design, and valid power on state (VPOS) for camshaft applications to minimize engine synchronization timing
Dual element differential option offers extremely accurate gear edge detection, peak detector circuitry that is immune to tilt or off-center failure mode, and gain-adjust circuitry that reduces the effect of minor gear anomalies
Enhanced sensing capability helps reduce emissions and improve reliability and drivability

from

$69.20

Throttle Position Se

from

$17.29

THROTTLE POSITION SE

Top Picks for 1994 Pontiac Firebird Intake Manifold Parts

Upgrade Pontiac Firebirds with top-quality Intake Manifold Parts parts, including 10 OEM and aftermarket selections for your 1994 model.

show more show less

from

$35.99

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$31.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$32.09

Features 12-point Smaller-than-standard Bolt Head
Thick Flat Washers Distribute Optimum Clamp Load
Ideal Use Where Space Is Minimal On Race Manifolds
Bolts And Washers Zinc Plated For Protection
Zinc Plated For Protection

from

$15.49

These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:

Grade 5 socket head bolts are zinc plated for protection and appearance
Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
Washers Included

from

$40.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$18.99

from

$25.99

from

$26.99

Edelbrock part #7243 Intake Gaskets for 1992-1997 LT1 Small-Block Chevys allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-2N Micropore t

Product Features:

2.1″x1.265″
Features Embossed Silicone Bead Around The Intake Ports & Water Openings
.060″ Thick
Two Piece Configuration
End Seals Not Included

from

$782.99

Product Features:

1500-6500 RPM Range
Single Plane Type-Throttle Body Style Flange
6 in. Front Height, 6 in. Center Height, 6 in. Rear Height
Satin Finish
Made In The USA

from

$34.21

Original equipment design and quality
Head sets give you original equipment form, fit, and function
Utilizes OE equivalent or better materials in all head sets
Packaged in shrink wrapped tray
Every part you need to complete your gasket repair in one package unless otherwise stated

Top-Rated Air Intakes Brands For Your 1994 Pontiac Firebird

Shop for the best-rated brands offering Air Intakes and other products for your 1994 Pontiac Firebirds. Below you’ll find some of our best rated Air Intakes from ACDelco, Dorman, and Mr. Gasket, and more. Air Intakes from these brands that fit a 1994 Firebird start at just $0.99 and are rated as high as 5 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.

Popular ACDelco 1994 Pontiac Firebird Air Intakes

When it comes to maintaining or upgrading your 1994 Pontiac Firebird, using quality Air Intakes is essential to ensure durability and a perfect fit. ACDelco ticks all of those boxes. We offer a wide selection of ACDelco Air Intakes, specifically designed for the 1994 Pontiac Firebird. With over 3 ACDelco brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $35.99, with an average price of just $60.19. Plus, with over 21 customer reviews and an average rating of 5 stars, you can trust that our ACDelco Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$49.99

This product is not rated

Throttle Position Sensor

“”

from
$94.59

This product is not rated

GM Original Equipment Throttle Position Sensor

“”

from
$35.99

(21)

Multi-Purpose Temperature Sensor

“A+”

Popular Dorman 1994 Pontiac Firebird Air Intakes

Dorman auto parts is one of the highest quality Air Intake brands in the market. Any 1994 Pontiac Firebird owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1994 Firebird, Advance Auto Parts carries a full inventory of 5 Dorman Air Intakes. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Dorman Air Intakes range from $0.99 to $73.90, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Air Intakes below will deliver on both quality and value.

from
$73.9

This product is not rated

Throttle Body Position Sensor

“”

from
$3.99

This product is not rated

Nylon Grill Bumper Retainer

“”

from
$4.49

This product is not rated

GM Bumper Retainer

“”

FAQs for 1994 Pontiac Firebird Air Intakes

Which Air Intakes are best-sellers for 1994 Pontiac Firebirds?

Out of 27 Air Intakes that fit 1994 Pontiac Firebirds, the following parts are the top sellers:

GM Bumper Retainer (11910885) – $4.49
Intake Manifold Bolts (6120970) – $15.49
Throttle Position Sensor (12424545) – $38.99

What’s the price range for 1994 Pontiac Firebird Air Intakes?

Air Intake prices for the 1994 Pontiac Firebird start at $0.99 and go up to $782.99 for the most premium parts.

What’s the average price of a Air Intake for a 1994 Pontiac Firebird?

The average price for Air Intakes for the 1994 Pontiac Firebird is $60.17. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Air Intakes for other Pontiac Firebird model years?

Yes, we currently carry Air Intakes for 35 model years of Pontiac Firebirds between 1967 and 2002. Air Intakes are bought most frequently for the following model years: 2002, 2001, 2000, 1999, 1998, 1997, 1996, 1995, and 1993.

What are the cheapest Air Intakes for my 1994 Pontiac Firebird?

The cheapest 1994 Pontiac Firebird Air Intakes we carry in stock are:

Rivet-Push In-Hole Diameter .250 In. (Sold by each) (22142358) – $0.99
Nylon Grill Bumper Retainer (11224063) – $3.99
GM Bumper Retainer (11910885) – $4.49
Fuel Injection Throttle Body Mounting Gasket (19780278) – $4.99
Fuel Injection Throttle Body Mounting Gasket (19780317) – $5.49

What are the top-rated Air Intakes that fit the 1994 Pontiac Firebird?

Out of 155 reviews by customers, our 1994 Pontiac Firebird Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 1994 Pontiac Firebird and their top-rated products:

Throttle Bodies & Carb Parts
- Fuel Injection Throttle Body Mounting Gasket (19780278) – $4.99
- Fuel Injection Throttle Body Mounting Gasket (19780317) – $5.49
- Throttle Position Sensor (25987632) – $41.49
Intake Manifold Parts
- Fuel Injection Throttle Body Mounting Gasket (19780278) – $4.99
- Fuel Injection Throttle Body Mounting Gasket (19780317) – $5.49
- Throttle Position Sensor (25987632) – $41.49

What types of Air Intakes do you sell for my 1994 Pontiac Firebird?

As of 2/5/25, these are some of the most in-demand types of Air Intakes for a 1994 Pontiac Firebird:

Can I get help with 1994 Pontiac Firebird Air Intake orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Air Intakes and more.

What is your return policy for Pontiac Firebird Air Intakes?

Advance Auto Parts keeps returns simple. For new Pontiac Firebird Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1994 Pontiac Firebird Air Intakes

Spectre – Bolt Kit Intake Hex Head (Part No.4652)

ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers (Part No.434-2101)

Mr. Gasket – Intake Manifold Bolts (Part No.6091)

ACDelco – Throttle Position Sensor (Part No.213-912)

Carquest Premium – Throttle Sensor (Part No.ECC1234)

Carquest Premium – Throttle Sensor (Part No.ECC1215)

Dorman – Help – Throttle Return Spring (Part No.59209)

Carquest – Air Charge Temperature Sensor (Part No.31A1016)

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1042)

ACDelco – Multi-Purpose Temperature Sensor (Part No.213-928)

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1078)

Edelbrock – Performer RPM Small Block Chevy AIR-Gap Intake Manifold (Part No.7501)

Edelbrock – Torker II Intake Manifold Small-Block Chevy (Part No.5001)

Edelbrock – Performer RPM Pontiac 326-455 Intake Manifold (Part No.7156)

Edelbrock – Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR (Part No.2156)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60983)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60903)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60655)

Mahle – FI Throttle Body Mou (Part No.C7001292101MAH)

Edelbrock – Intake Manifold replacement runner to base gaskets (Part No.6950)

Mr. Gasket – Ultra-Seal Intake Manifold Gasket with Silicone Beading (Part No.5821)

ACDelco – GM Original Equipment Intake Manifold Gasket (Part No.A8040202568ACD)

Mahle – Intake Manifold Gasket Set (Part No.A80431072959MAH)

Dorman – Rivet-Push In-Hole Diameter .250 In. (Sold by each) (Part No.700-576)

Dorman – Nylon Grill Bumper Retainer (Part No.961-364)

Dorman – GM Bumper Retainer (Part No.961-364D)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60655)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60983)

Delphi – Throttle Position Sensor (Part No.SS10459)

Dorman – Help – Throttle Return Spring (Part No.59209)

Carquest Premium – Throttle Position Sensor (Part No.ECC1009)

ACDelco – Throttle Position Sensor (Part No.213-895)

Carquest Premium – Throttle Position Sensor (Part No.ECC1039)

NTK – Throttle Position Sensor (Part No.TH0033)

Vemo – Throttle Position Sensor (Part No.C7012175635VMO)

ACDelco – GM Original Equipment Throttle Position Sensor (Part No.C7012175635ACD)

Dorman – Throttle Body Position Sensor (Part No.C7012175635DOR)

Delphi – Throttle Position Sensor (Part No.C7012207692DEL)

Autopart International Inc – Throttle Position Se (Part No.C70122026391API)

Worldpac – THROTTLE POSITION SE (Part No.C7012175635ANA)

Dorman – GM Bumper Retainer (Part No.961-364D)

Dorman – Nylon Grill Bumper Retainer (Part No.961-364)

Dorman – Rivet-Push In-Hole Diameter .250 In. (Sold by each) (Part No.700-576)

ACDelco – Multi-Purpose Temperature Sensor (Part No.213-928)

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 95580)

Mr. Gasket – Intake Manifold Bolts (Part No.6091)

Mr. Gasket – Intake Manifold Bolts (Part No.955G)

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 93020)

Carquest – Air Charge Temperature Sensor (Part No.31A1016)

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1042)

Edelbrock – Intake Manifold Gasket for 1992-1997 LT1 Small-Block Chevys (Part No.7243)

Edelbrock – Performer RPM Air Gap Intake Manifold for 1992-97 LT1 Engines (Part No.7107)

Mahle – Intake Man. Gasket S (Part No.A8043648121MAH)