1994 Mazda Navajo Differentials

Essential 1994 Mazda Navajo Differentials

Yukon Gear – Trao Loc Spring For Ford 8.8", 28 Spline (Part No.33515)

Trao Loc Spring For Ford 8.8", 28 Spline

from

$63.99
Product Features:
  • Trac Loc spring
  • Fits 28 spline Ford 8.8
See More

Yukon Gear – 8.8" Ford Low Profile Ta HD Aluminum Rear Cover (Part No.32114)

8.8" Ford Low Profile Ta HD Aluminum Rear Cover

from

$419.99
8.8″ Ford low profile TA HD Aluminum rear Cover. This cover will not fit vehicles with independent rear suspension.

Product Features:
  • Fits Ford 8.8″
  • Aluminum girdle cover
See More

Yukon Gear – 7.5", 8", 8.8", 9", 10.25" Ford Redi Sleeve Yoke Saver (Part No.30226)

7.5", 8", 8.8", 9", 10.25" Ford Redi Sleeve Yoke Saver

from

$30.99
7.5″, 8″, 8.8″, 9″, 10.25″ Ford REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Ford 7.5″, 8.8″, 9″ and 10.25″
See More

Powertrax – Grip LS Traction System (Part No.LS108831)

Grip LS Traction System

from

$463.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Mini Spool For Ford 8.8" With 28 Spline Axles (Part No.32225)

Mini Spool For Ford 8.8" With 28 Spline Axles

from

$218.99
Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8.8″ with 28 spline axles
  • Provides 100% traction to both wheels at all times
  • Installs into standard open carrier case
See More

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Pro-King – Differential Cross Shaft (Part No.742G930)

Differential Cross Shaft

from

$2.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Cross Pin Shaft (0.875") For ’86 And Newer 8.8" Ford (Part No.33331)

Cross Pin Shaft (0.875") For '86 And Newer 8.8" Ford

from

$42.99
Cross pin shaft (0.875″) for ’86 and newer 8.8″ Ford.

Product Features:
  • Cross pin shaft for Ford 8.8″
  • 0.875″ diameter
See More

Yukon Gear – Pinion Install Kit For Ford 8.8" Differential (Part No.13041)

Pinion Install Kit For Ford 8.8" Differential

from

$167.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 2009 and down Ford 8.8″
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Driveworks – Oil Seal (Part No.S-3604)

Oil Seal

from

$4.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – 8.8" Ford Tracloc Clutch Set, Both Sides (Part No.16018)

8.8" Ford Tracloc Clutch Set, Both Sides

from

$241.99
8.8″ Ford TracLoc (with short ears–for late models only) clutch set, both sides.

Product Features:
  • Clutch kit
  • Fit Ford 8.8″ Trac Loc positraction
See More

Driveworks – Tapered Roller Bearing (Part No.S-LM-603011)

Tapered Roller Bearing

from

$6.29
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Dura Grip Positraction For Ford 8.8" With 28 Spline Axles (Part No.26005)

Dura Grip Positraction For Ford 8.8" With 28 Spline Axles

from

$834.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits Ford 8.8″ with 28 spline axles
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Bearing Race Driver (Part No.56023)

Bearing Race Driver

from

$219.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M88010 race
  • All steel construction
See More

Yukon Gear – Set Up Bearing (Part No.56045)

Set Up Bearing

from

$153.99
M802048 set-up bearing (one bearing). No return.

Product Features:
  • Set up bearing
  • Fits M802048 pinion bearing
  • Easily slips on and off pinion journal to allow for easier pinion depth adjustment
See More

Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
  • Interlocking design makes installation much easier
See More

Pro-King – Differential Internal Nest Kit (Part No.762B717)

Differential Internal Nest Kit

from

$239.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

USA Standard Gear – Ring and Pinion Kit (Part No.36329)

Ring and Pinion Kit

from

$319.99
Ring and Pinion Kit

Yukon Gear – Standard Open Spider Gear Kit For 8.8" Ford With 31 Spline Axles (Part No.16021)

Standard Open Spider Gear Kit For 8.8" Ford With 31 Spline Axles

from

$299.99
Yukon standard open spider gear kit for 8.8″ Ford with 31 spline axles and 7/8″ pin. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Ford 8.8″ with 31 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
  • 0.875″ cross pin shaft diameter
See More

Yukon Gear – Minor Install Kit For Model 35 IFS Differential For Ranger And Explorer (Part No.12068)

Minor Install Kit For Model 35 IFS Differential For Ranger And Explorer

from

$175.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. Includes side seals. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits AMC Model 35 IFS
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Motive Gear – Differential Gear Install Kit (Part No.F8.8IK)

Differential Gear Install Kit

from

$35.99


Product Features:
  • MINI INSTALL KIT FORD 8.8
See More

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

from

$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:
  • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
See More

Yukon Gear – Side Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford (Part No.33298)

Side Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford

from

$6.99
Side gear thrust washer (0.750″ shaft) for 8.8″ Ford.

Product Features:
  • Side gear thrust washer for Ford 8.8″
  • 0.750″ diameter cross pin shaft applications only
See More

Yukon Gear – Standard Open Carrier Case, Ford 8.8", 28 Spline (Part No.20076)

Standard Open Carrier Case, Ford 8.8", 28 Spline

from

$379.99
8.8″ 28 spline standard Open bare case (incl REVERSE) 3/4″ cross pin Hole.

Product Features:
  • Standard open carrier case
  • Does not include spider gears
  • Fits Ford 8.8″ with 28 spline axles
  • 3/4″ cross pin bore
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Motive Gear – Axle Shaft (Part No.MG1725)

Axle Shaft

from

$135.99
The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

Product Features:
  • AXLE SHAFT 8.8″ 31 SPL. EXPLORER, NAVAJO 2&4 WD, 30 5/8″ L.H.
See More

Yukon Gear – Crush Sleeve Eliminator Kit For Ford 8.8" & 7.5" (Part No.55040)

Crush Sleeve Eliminator Kit For Ford 8.8" & 7.5"

from

$96.99
2 piece solid spacer for Ford 8.8 and 7.5.

Product Features:
  • Crush sleeve eliminator kit for Ford 7.5″ and 8.8″
See More

Yukon Gear – Trac Loc Positraction, Ford 8.8", 31 Spline (Part No.20069)

Trac Loc Positraction, Ford 8.8", 31 Spline

from

$719.99
Product Features:
  • Trac Loc positraction
  • Fits Ford 8.8″ with 31 spline axles
See More

1994 Mazda Navajo Differentials

Maybe you’re in the middle of a full rebuild of that 1994 Mazda Navajo. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 139 different Differentials in our inventory ranging from $0.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1994 Mazda Navajo running smoothly.

Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1994 Mazda Navajo. FELPRO, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1994 Mazda Navajo, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 360 reviews in this category, some of the top rated parts include Differential Master Bearing Kit – Timken with 4.0 stars and Wheel Bearing and Seal Kit with 3.8 stars.

So if you’re in the market for aftermarket Differentials to keep your 1994 Mazda Navajo rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1994 Mazda Navajo Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1994 Mazda Navajo demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Navajo the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Dorman Differentials

We carry Dorman parts in our stock across Differential Covers categories, plus more. For a 1994 Mazda Navajo, our most popular Dorman Differentials include:
Rear Differential Cover
from $34.99
(34)
Rear Differential Cover
Differential Covers

Top 1994 Mazda Navajo Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1994 Mazda Navajo. Popular Felpro parts include:
Differential Cover Gasket
from $14.99
(121)
Differential Cover Gasket
Rear Differential Cover Gaskets

FAQs for 1994 Mazda Navajo Differentials

What are the most purchased Differentials for the 1994 Mazda Navajo?

Out of 139 Differentials for the 1994 Mazda Navajo, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $23.99
(7)
Bearings
Front Differential Pinion Bearings
Oil Seal
from $4.79
(1)
Oil Seal
Differential Pinion Seals

What are the top-rated 1994 Mazda Navajo Differentials?

Top-rated Differentials for your 1994 Mazda Navajo based on customer reviews/ratings are:
Differential Master Bearing Kit - Timken
from $137.99
(8)
Differential Master Bearing Kit – Timken
“These Timken bearings work great in my 10 second drag car.”
Wheel Bearing and Seal Kit
from $169.99
(4)
Wheel Bearing and Seal Kit
“Complete kit with for my rebuild. I was lucky to get awesome service from the salesman. Parts were very reasonable price-wise.”
Differential Master Bearing Kit - Koyo
from $126.99
(2)
Differential Master Bearing Kit – Koyo
“Nice kit for the money.”