1994 Mazda Navajo Air Intakes
Find Your Specific 1994 Mazda Navajo Air Intakes
Below you will find various in-demand Mazda Air Intakes, components and accessories for your 1994 Navajo. Advance Auto Parts has popular Navajo parts like Carburetor Kits, Intake Manifold Parts, Throttle Bodies & Carb Parts and more. You’ll also find aftermarket and OEM Air Intakes for other Navajo model years including
1991,
1992,
1993 and more. Select a category of 1994 Mazda Navajo Air Intakes below and start saving instantly.
Popular 1994 Mazda Navajo Air Intakes Categories
Essential Air Intakes for 1994 Mazda Navajos
Carquest Premium – Throttle Position Sensor (Part No.ECC1073)
from
$47.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Fuel Injector Seal Kit (Part No.AS009)
from
$3.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Carquest Premium – Multi-Use Connector (Part No.PTA1279)
from
$16.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 90728)
from
$78.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE – Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98005 T)
from
$91.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE – Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Upgrade your 1994 Mazda Navajo with Top-Quality Air Intakes
When it comes to maintaining or upgrading your 1994 Mazda Navajo, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mazda or enhancing its overall performance, Air Intakes are key to keeping your Navajo functioning at its best. At Advance Auto Parts, we offer a wide selection of 5 Air Intakes for the 1994 Mazda Navajo, designed to meet your needs without breaking the bank.
From
Carburetor Kit
replacements to
Intake Manifold Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 1994 Mazda Navajo at great prices.
Our Air Intakes inventory for this model
ranges from just $3.99 to $91.99, with
an average price of $47.99.
Our 5 Air Intakes in stock come from 2 trusted brands, so you’re sure to find the right part for your 1994 Mazda Navajo without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1994 Mazda Navajo is always ready to roll. We’re committed to providing you with everything you need to keep your Navajo in top shape, all in one place.
Start shopping confidently below for your 1994 Mazda Navajo!
Best-Selling Carburetor Kits for 1994 Mazda Navajos
Enhance the driving experience in your Mazda with 1 quality Carburetor Kit components, starting at $3.99.
Carquest Premium – Fuel Injector Seal Kit (Part No.AS009)
from
$3.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Most Popular 1994 Mazda Navajo Intake Manifold Parts
Customize your Mazda with 2 Intake Manifold Parts products
like Intake Manifold Gasket Sets, all
priced under $91.99.
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98005 T)
from
$91.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE – Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 90728)
from
$78.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE – Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Top Picks for 1994 Mazda Navajo Throttle Bodies & Carb Parts
Upgrade Mazda Navajos with top-quality Throttle Bodies & Carb Parts parts, including 2 OEM and aftermarket selections for your 1994 model.
Carquest Premium – Throttle Position Sensor (Part No.ECC1073)
from
$47.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Multi-Use Connector (Part No.PTA1279)
from
$16.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
FAQs for 1994 Mazda Navajo Air Intakes
Which Air Intakes are best-sellers for 1994 Mazda Navajos?
Out of 5 Air Intakes that fit 1994 Mazda Navajos, the following parts are the top sellers:
- Fuel Injector Seal Kit (11450096) – $3.99
- Throttle Position Sensor (12424334) – $47.99
- Multi-Use Connector (12443181) – $16.99
What’s the price range for 1994 Mazda Navajo Air Intakes?
Air Intake prices for the 1994 Mazda Navajo start at $3.99 and go up to $91.99 for the most premium parts.
What’s the average price of a Air Intake for a 1994 Mazda Navajo?
The average price for Air Intakes for the 1994 Mazda Navajo is $47.99. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Air Intakes for other Mazda Navajo model years?
What are the cheapest Air Intakes for my 1994 Mazda Navajo?
The cheapest 1994 Mazda Navajo Air Intakes we carry in stock are:
- Fuel Injector Seal Kit (11450096) – $3.99
- Multi-Use Connector (12443181) – $16.99
- Throttle Position Sensor (12424334) – $47.99
- INTAKE MANIFOLD GASKET SET (15780305) – $78.99
- Engine Intake Manifold Gasket Set (15780996) – $91.99
What are the top-rated Air Intakes that fit the 1994 Mazda Navajo?
Out of 12 reviews by customers, our 1994 Mazda Navajo Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 1994 Mazda Navajo and their top-rated products:
- Intake Manifold Parts
- Engine Intake Manifold Gasket Set (15780996) – $91.99
- INTAKE MANIFOLD GASKET SET (15780305) – $78.99
What types of Air Intakes do you sell for my 1994 Mazda Navajo?
As of 11/2/25, these are some of the most in-demand types of Air Intakes for a 1994 Mazda Navajo:
Can I get help with 1994 Mazda Navajo Air Intake orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mazda Air Intakes and more.
What is your return policy for Mazda Navajo Air Intakes?
Advance Auto Parts keeps returns simple. For new Mazda Navajo Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
