1994 Mazda B3000 Performance and Racing Products

Essential Performance and Racing Products for 1994 Mazda B3000s

Accel – Distributor Cap And Rotor Kit (Part No.8230)

Distributor Cap And Rotor Kit

from

$108.99


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Tie Rod Dust Boot

from

$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Energy Suspension – Axle Pivot Bushing Set (Part No.4.3119R)

Axle Pivot Bushing Set

from

$30.99
Product Features:
  • Firm in the Center Yet Soft on the Outside
  • Allows Flex and Pivot When Needed
See More

Richmond Gear – RngPnn (Part No.69-0376-1)

RngPnn

from

$359.99
RngPnn

Richmond Gear – RngPnn (Part No.69-0382-1)

RngPnn

from

$369.99
RngPnn

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Energy Suspension – Leaf Spring Bushing Set (Part No.4.2134G)

Leaf Spring Bushing Set

from

$70.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Powertrax – Lock Right Locker (Part No.1822-LR)

Lock Right Locker

from

$371.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Powertrax – Lock Right Locker (Part No.1821-LR)

    Lock Right Locker

    from

    $441.99
    The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2024)

    Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

    from

    $74.99
    K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

    Product Features:
    • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
    • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
    • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
    • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
    • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
    • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
    • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
    • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
    See More

    FAG US – CUP (Part No.LM48510)

    CUP

    from

    $7.69
    CUP

    Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)

    Ford 1984-98 Eec-Iv Supercoil

    from

    $77.99
    Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

    Product Features:
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Standard Motor Products SMP Fd-478
    • MSD 5527
    • Standard Motor Products SMP Fd-478
    • MSD 5527
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    Energy Suspension – TransMt (Part No.4.1148G)

    TransMt

    from

    $80.99
    TransMt

    Energy Suspension – TransMt (Part No.4.1148R)

    TransMt

    from

    $72.99
    TransMt

    Upgrade your 1994 Mazda B3000 with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1994 Mazda B3000, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mazda or enhancing its overall performance, Performance and Racing Products are key to keeping your B3000 functioning at its best. At Advance Auto Parts, we offer a wide selection of 22 Performance and Racing Products for the 1994 Mazda B3000, designed to meet your needs without breaking the bank. From Performance Distributor replacements to Performance Air Filters upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1994 Mazda B3000 at great prices. Our Performance and Racing Products inventory for this model ranges from just $7.69 to $441.99, with an average price of $174.49. Our 22 Performance and Racing Products in stock come from 9 trusted brands, so you’re sure to find the right part for your 1994 Mazda B3000 without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1994 Mazda B3000, we stock popular OEM and aftermarket Performance and Racing Products from top names like Accel Energy Suspension, and more. Accel Performance and Racing Products start at just $77.99 and boast an impressive 4 stars average rating from customers. With 51 customer reviews and counting, our 1994 Mazda B3000 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1994 Mazda B3000 is always ready to roll. We’re committed to providing you with everything you need to keep your B3000 in top shape, all in one place. Start shopping confidently below for your 1994 Mazda B3000!

    Best-Selling Performance Distributors for 1994 Mazda B3000s

    Enhance the driving experience in your Mazda with 1 quality Performance Distributor components, starting at $108.99.

    Accel – Distributor Cap And Rotor Kit (Part No.8230)

    Distributor Cap And Rotor Kit

    from

    $108.99


    Product Features:
    • Heavy Duty Cap and Rotor Kit
    • With Brass Inserts
    See More

    Most Popular 1994 Mazda B3000 Performance Air Filters

    Customize your Mazda with 1 Performance Air Filters products like Performance Air Filters, all priced under $74.99.

    K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2024)

    Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

    from

    $74.99
    K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

    Product Features:
    • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
    • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
    • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
    • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
    • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
    • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
    • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
    • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
    See More

    Top Picks for 1994 Mazda B3000 Performance Suspension Products

    Upgrade Mazda B3000s with top-quality Performance Suspension Products parts, including 2 OEM and aftermarket selections for your 1994 model.

    Energy Suspension – Axle Pivot Bushing Set (Part No.4.3119R)

    Axle Pivot Bushing Set

    from

    $30.99
    Product Features:
    • Firm in the Center Yet Soft on the Outside
    • Allows Flex and Pivot When Needed
    See More

    Energy Suspension – Leaf Spring Bushing Set (Part No.4.2134G)

    Leaf Spring Bushing Set

    from

    $70.99
    Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

    Product Features:
    • Made of Superior Hyper-Flex+ Material
    • Adds Dramatic Amount of Performance/Durability
    • Helps Vehicle Be in Control
    • Allows the Suspension to Function Properly
    See More

    In-Demand Performance Ignition Products for 1994 Mazda B3000s

    Select from 3 premium Performance Ignition Products parts for your 1994 Mazda B3000, with prices ranging from $77.99 to $186.99.

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)

    Ford 1984-98 Eec-Iv Supercoil

    from

    $77.99
    Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

    Product Features:
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Standard Motor Products SMP Fd-478
    • MSD 5527
    • Standard Motor Products SMP Fd-478
    • MSD 5527
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    Most Sold 1994 Mazda B3000 Performance Steering Products

    Explore our best-selling Mazda parts for the 1994 B3000 among 1 OEM and aftermarket options starting from $9.99.

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

    Tie Rod Dust Boot

    from

    $9.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More

    Top-Rated Performance and Racing Products Brands For Your 1994 Mazda B3000

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1994 Mazda B3000s. Below you’ll find some of our best rated Performance and Racing Products from Accel and Energy Suspension, and more. Performance and Racing Products from these brands that fit a 1994 B3000 start at just $9.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular Accel 1994 Mazda B3000 Performance and Racing Products

    When it comes to maintaining or upgrading your 1994 Mazda B3000, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Accel ticks all of those boxes. We offer a wide selection of Accel Performance and Racing Products, specifically designed for the 1994 Mazda B3000. With over 2 Accel brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $77.99, with an average price of just $93.49. Plus, with over 36 customer reviews and an average rating of 4 stars, you can trust that our Accel Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Ford 1984-98 Eec-Iv Supercoil
    from
    $77.99

    (28)

    Ford 1984-98 Eec-Iv Supercoil

    “No complaints. Good priced coil for tune up.”

    Distributor Cap And Rotor Kit
    from
    $108.99

    (8)

    Distributor Cap And Rotor Kit

    “The part works great, fits nice and snug, and does exactly what it’s supposed to do. I put her in and she fired right up, no problems what so ever. I ”

    Popular Energy Suspension 1994 Mazda B3000 Performance and Racing Products

    Energy Suspension auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1994 Mazda B3000 owner should feel confident when installing genuine Energy Suspension parts in their vehicle. To ensure the best fit and performance for your 1994 B3000, Advance Auto Parts carries a full inventory of 5 Energy Suspension Performance and Racing Products. Plus you will be keeping your Mazda in peak condition while saving money because prices on these Energy Suspension Performance and Racing Products range from $9.99 to $80.99, plus, with more than 3 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    Axle Pivot Bushing Set
    from
    $30.99
    This product is not rated

    Axle Pivot Bushing Set

    “”

    Leaf Spring Bushing Set
    from
    $70.99
    This product is not rated

    Leaf Spring Bushing Set

    “”

    TransMt
    from
    $80.99
    This product is not rated

    TransMt

    “”

    FAQs for 1994 Mazda B3000 Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1994 Mazda B3000s?

    Out of 22 Performance and Racing Products that fit 1994 Mazda B3000s, the following parts are the top sellers:

    What’s the price range for 1994 Mazda B3000 Performance and Racing Products?

    Performance and Racing Product prices for the 1994 Mazda B3000 start at $7.69 and go up to $441.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1994 Mazda B3000?

    The average price for Performance and Racing Products for the 1994 Mazda B3000 is $174.49. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Mazda B3000 model years?

    Yes, we currently carry Performance and Racing Products for 12 model years of Mazda B3000s between 1995 and 2007. Performance and Racing Products are bought most frequently for the following model years: 2007, 2006, 2005, 2004, 2003, 2002, 2001, 2000, and 1999.

    What are the cheapest Performance and Racing Products for my 1994 Mazda B3000?

    The cheapest 1994 Mazda B3000 Performance and Racing Products we carry in stock are:

    What are the top-rated Performance and Racing Products that fit the 1994 Mazda B3000?

    Out of 51 reviews by customers, our 1994 Mazda B3000 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1994 Mazda B3000 and their top-rated products:

    What types of Performance and Racing Products do you sell for my 1994 Mazda B3000?

    Can I get help with 1994 Mazda B3000 Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mazda Performance and Racing Products and more.

    What is your return policy for Mazda B3000 Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Mazda B3000 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.