1994 GMC C2500 Fuel and Emissions Systems

Name: Multi-Purpose Gasket
Brand: ACDelco
SKU: 14025557
Price: 3.99 USD

Below you will find various in-demand GMC Fuel and Emissions Systems, components and accessories for your 1994 C2500. Advance Auto Parts has popular C2500 parts like Gas Caps, Fuel Injectors, Air Flow Sensors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other C2500 model years including 1991, 1992, 1993, 1995, 1996, 1997, 1998, 1999, 2000 and more. Select a category of 1994 GMC C2500 Fuel and Emissions Systems below and start saving instantly.

Popular 1994 GMC C2500 Fuel and Emissions Systems Categories

Fuel Pump Driver Modules

Diesel Injector Driver Modules

Fuel Tank Attaching Hardware

Air- Fuel Ratio Sensors

Fuel Tank Cleaning Kits

Vapor Canister Purge Valves

Fuel Lift Pumps

Fuel Injector Installation Kits

Fuel Injection Pumps

MAP-Barometric Pressures

Vapor Canister Vent Valves

Manifold Air Pressure Sensors

Canister Purge Solenoids

Fuel Tanks

EGR Valves

Fuel Injectors

Fuel Pump Hanger Assemblies

Idle Air Parts

Vapor Canisters

Ambient Air Temperature Sensor Connectors

Fuel Tank Sender Assemblies

Mass Air Flow Sensor Relays

Water In Fuel Sensors

Pressure Regulators

Air Charge Temperature Sensors

Fuel Injection Idle Air Control Valves

Ambient Air Temperature Sensors

Fuel Injector O-Ring Kits

Electric Pump Filter and Strainers

Smog and Vacuum Pump Pulleys

Fuel Injector Seal Kits

Fuel Tank Straps

Fuel Injector Gaskets

Fuel Tank Lock Rings

Diesel Fuel Injector Pump Driver Relocation Kits

Fuel Tank Filler Necks

EGR Vacuum Solenoids

Fuel Tank Vent Valves

EGR Valve Control Switches

Fuel Injector Connectors

Fuel Tank Sending Units

Mass Air Flow Sensor Connectors

Fuel Injection Resistor Unit

Fuel Line Connectors

Fuel Pump Pulsators

Fuel Tank Selector Valves

Fuel Injector Pump Resistors

Fuel Pump Tank Seals

Exhaust Check Valves

Oxygen Sensor Connectors

Fuel Pump and Engine Oil Pressure Indicator Switches

Idle Air Control Valve Connectors

EGR Valve Gaskets

Diesel Fuel Line Seal Rings

Fuel Pump Driver Module Connectors

Fuel Injection Pump Drive Gear

Ambient Air Temperature Sensor Clip

EGR Valve Connectors

Fuel Tank Crossmembers

Fuel Cap Tester Adapters

Fuel Pump Harness

Fuel Injection Pump Installation Kits

Vacuum Reservoir Nut

Fuel Tank Selector Valve Connectors

Diverter Valve Connectors

Essential Fuel and Emissions Systems for 1994 GMC C2500s

from

$3.99

GM Genuine Parts Fuel Injector Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$70.99

Product Features:

Original equipment fit, form and function

from

$33.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
Direct fit ensures safe, secure fuel tank installation
Product individually packaged and labeled to help reduce product damage prior to installation
Industry leading coverage on straps for plastic tanks

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$95.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$38.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$322.99

ACDelco GM Original Equipment Exhaust Gas Recirculation (EGR) Valves are an emission control device and are GM-recommended replacements for your vehicle’s original components. EGR valves modulate the flow of exhaust gas into the intake manifold to help reduce nitrogen oxide (NOx) emissions. These original equipment exhaust gas recirculation valves have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Modulates the flow of exhaust gas into the intake manifold to help reduce nitrogen oxide (NOx) emissions
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$241.99

This fuel pump module assembly matches the fit and function of the original parts in specific vehicles. Built from durable materials, this pump is designed to be reliable over a long service life.

Product Features:

Direct replacement – this fuel pump assembly matches the fit and function of the original equipment fuel pump on specified vehicles.
Durable construction – this fuel pump is made of quality materials for a long service life.
Saves money – offers original equipment quality at a competitive price
Quality assured – this fuel pump assembly has undergone rigorous testing to ensure reliable performance

from

$102.99

CARDONE Diesel Fuel Injector Kits conveniently contain all components needed to complete the entire job, while other suppliers sell each component individually. Each kit includes everything required for installation, ensuring leak free operation and reduced crank times due to fuel leaks. Each kit contains 100% new components, ensuring trouble-free installation, keeping both you and your vehicle on the road for many years to come.

Product Features:

All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$38.99

Cardone is proud to offer our line of application specific Diesel Injection Pumps that expand across a variety of platforms. Our diesel injector pumps are precision wound with trimmed solenoid windings ensure accurate and precise delivery of fuel from the ECU. This allows for smooth engine operation, improved fuel consumption, reduced harmful emissions, instant throttle response, and optimal fuel atomization.

Product Features:

All components are renewed or replaced as necessary to ensure high quality and durability
All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E. function

from

$392.99

GM Genuine Parts Diesel Fuel Injector Driver Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules control the voltage delivered to your vehicle’s diesel engine fuel injectors. These modules help to maintain optimum fuel pressure and fuel delivery to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps control voltage delivered to diesel engine fuel injectors
Helps maintain fuel pressure and fuel delivery to engine
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$34.99

Dorman offers a comprehensive line of Idle Air Control Valve Connectors for a wide range of applications. All our Idle Air Control Valve Connectors are constructed of high-quality materials for long-lasting durability. We also offer a full selection of electrical terminals to complete the job.

Product Features:

Appropriate for 4-wire configurations.
Direct replacement Idle Air Control Valve Connectors available (where applicable) to ensure a proper fit
Vehicle try-on testing has been conducted on this part to ensure a trouble-free performance
Easy installation-just splice in the new socket to your existing wiring

from

$144.99

GM Genuine Parts Fuel Injection Idle Air Control Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These valves control the engine idle, and electrically actuated valves regulate the amount of air that bypasses the closed throttle plate while at idle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide smooth engine idle
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$248.99

New Platinum Pro Fuel Hanger Assembly For All Except Chassis Cab Models

Product Features:

Excludes Chassis Cab Models
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$188.99

This frame crossmember is designed to match the fit of an original equipment crossmember on specified vehicles, and can help eliminate the need to fabricate a replacement or install a salvage yard part. It is engineered to replace a factory crossmember that has rusted or damaged from impact, and is manufactured from durable steel for a reliable repair.

Product Features:

Ideal replacement – this fuel tank crossmember is a direct replacement for the original crossmember that allows only the damaged part to be replaced.
Durable construction – this crossmember is made of steel and painted in a corrosion-resistant finish for a long service life.
Cost-effective and reliable – offers original manufacturer quality at lower cost than replacing the frame and saves time and money required to fabricate a replacement
Quality tested – this crossmember has undergone vehicle try-on, material, and corrosion testing to ensure proper fit and long-lasting durability

from

$24.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$22.13

The FAE Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$87.99

This vacuum pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this vacuum pump pulley is designed to match the fit and function of the original pulley on specified applications.
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$234.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$28.49

This diesel fuel injector driver module resistor is designed to match the fit and function of the original resistor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this diesel fuel injector driver module resistor is designed to match the fit and function of the original resistor on specified vehicles.
Ideal solution – this module resistor is a reliable replacement for an original part that has failed due to heat or vibration.
Durable construction – this resistor is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$210.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Lock ring included with each tank to reduce installation time and to ensure a complete repair
Made with corrosion resistant, OE approved, Ni Terne steel for durability
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation

from

$7.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$289.99

Fuel Pump Driver Modules are the most common part to fail on computer-controlled diesel engines. The most common design failure is related to high operating temperatures and the ability of the module to handle heat. CARDONE 100% New Fuel Pump Driver Modules are engineered with higher quality materials that create and retain less heat – providing better performance and reliability.

Product Features:

Each unit is 100% computer-tested under high temperatures to meet real-world conditions.
All components used are ¿Automotive Grade¿ and have been tested to meet the harsh environment of automotive applications.
All components used are ┐Automotive Grade┐ and have been tested to meet the harsh environment of automotive applications.
Fuel Injector Pump Resistor available, where applicable (sold separately).
Fuel Injector Pump Resistor available, where applicable (sold separately)

from

$102.99

from

$18.99

Filtration performance and micron rating meet or exceed OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$41.99

from

$18.99

Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.

Product Features:

Direct replacement – these fuel line connectors fit and function like the vehicle’s original equipment connectors for reliable, leak-free performance.
Quality construction – manufactured from premium materials for a long service life
Saves money – replace only the part, not the entire assembly
Excellent value – original equipment quality at a lower price

from

$21.99

This fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles.
Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Upgrade your 1994 GMC C2500 with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1994 GMC C2500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your C2500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 234 Fuel and Emissions Systems for the 1994 GMC C2500, designed to meet your needs without breaking the bank. From Gas Cap replacements to Fuel Injectors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1994 GMC C2500 at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $1.29 to $1,926.99, with an average price of $100.62. Our 234 Fuel and Emissions Systems in stock come from 20 trusted brands, so you’re sure to find the right part for your 1994 GMC C2500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1994 GMC C2500, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Carquest Premium Delphi, and more. Carquest Premium Fuel and Emissions Systems start at just $1.29 and boast an impressive 4 stars average rating from customers. With 10,361 customer reviews and counting, our 1994 GMC C2500 Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1994 GMC C2500 is always ready to roll. We’re committed to providing you with everything you need to keep your C2500 in top shape, all in one place. Start shopping confidently below for your 1994 GMC C2500!

Best-Selling Gas Caps for 1994 GMC C2500s

Enhance the driving experience in your GMC with 20 quality Gas Cap components, starting at $6.99.

show more show less

from

$15.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$11.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$16.79

None

Product Features:

Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$12.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$14.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.49

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$16.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
“Torque Override” feature aids in the proper installation of the fuel cap. It produces an audible click as the O-ring that seals the cap is properly compressed.

from

$23.99

None

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$21.79

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$22.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$12.49

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$6.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$31.99

None

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$23.99

Experience uncompromising quality and emissions compliance with these tethered fuel caps. Manufactured with top-tier materials and rigorous production and safety standards adhering to Original Equipment Manufacturer guidelines. Designed meticulously to meet both state and federal emissions requirements, it ensures environmental responsibility. With its specifically engineered pressure and vacuum relief valves, fuel evaporation becomes a thing of the past. Bid farewell to the risk of losing up to 30 gallons of precious gasoline over a year due to a leaking fuel cap. Trust in our superior construction to safeguard your fuel and contribute to a greener future.

from

$10.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$22.99

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$20.99

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

Most Popular 1994 GMC C2500 Fuel Injectors

Customize your GMC with 34 Fuel Injectors products like Fuel Injector Gaskets, Fuel Injectors, and Fuel Injector O-Ring Kits, all priced under $397.64.

show more show less

from

$49.99

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$106.99

This diesel fuel injector pump driver relocation kit is designed to match the original components required to relocate the fuel injector pump on specified vehicles. It’s made of quality components for reliable performance.

Product Features:

Direct replacement – this diesel fuel injector pump driver relocation kit is designed to match the original components required to repair the fuel injector pump on specified vehicles.
Ideal solution – this kit is a reliable replacement for original components.
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$119.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?

from

$49.99

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$49.49

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$3.79

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$36.49

Pigtail connector allows replacement of damaged fuel injector connector.

from

$91.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?

from

$40.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$88.99

CARQUEST new diesel fuel injectors are manufactured using state of the art equipment to ensure long life and trouble-free operation. Each injector is 100% tested to meet or exceed OE performance specifications.

Product Features:

Premium OE quality materials
Includes copper combustion seal

from

$28.49

Direct replacement – this diesel fuel injector driver module resistor is designed to match the fit and function of the original resistor on specified vehicles.
Ideal solution – this module resistor is a reliable replacement for an original part that has failed due to heat or vibration.
Durable construction – this resistor is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$105.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?

from

$65.99

CARQUEST precision remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested to meet or exceed OE performance specifications.

Product Features:

Premium OE quality materials
Includes copper combustion seal

from

$66.99

Premium OE quality materials
Includes copper combustion seal

from

$93.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
State-of-the-art designs that meet or exceed OE specifications
Top-of-the-line quality and performance
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$95.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$340.91

The ACDelco Professional, premium aftermarket Fuel Injector is the ideal high quality replacement for your GM vehicle. It is an electro-magnetic valve that meters fuel into the engine’s intake manifold or cylinders for combustion. The engine management computer operates the injector by applying an electric current to the injector solenoid winding – this causes the needle valve to open, and allows the pressurized fuel to be atomized into the intake airstream. This premium aftermarket replacement fuel injector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Atomize fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$121.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation

from

$2.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$48.49

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$397.64

Atomize fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$289.16

Atomize fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$281.54

Atomize fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$269.99

ACDelco Professional Fuel Injector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket injector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$172.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$168.99

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$145.36

Fuel Pressure Regula

from

$102.99

All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$83.99

Premium OE quality materials
Includes copper combustion seal

from

$67.99

CARDONE Fuel Injection Pump Installation Kits provide the option of not replacing the entire oil rail, providing an easy fix and saving you hundreds of dollars. Paired with CARDONE’s premium Oil Rail Removal Tool (2K-205T), this repair kit allows technicians and vehicle owners to repair expensive high-pressure oil issues in a fraction of the time.

Product Features:

All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$21.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Part is validated, tested and matched to the vehicle application
Delphi engineered to meet customer expectations
Delphi provides O-rings and other components to assist in completing the job
Manufactured to meet or exceed OE requirements

from

$12.94

The ACDelco GM Original Equipment Fuel Injection Throttle Body Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$3.99

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

Top Picks for 1994 GMC C2500 Air Flow Sensors

Upgrade GMC C2500s with top-quality Air Flow Sensors parts, including 24 OEM and aftermarket selections for your 1994 model.

show more show less

from

$65.05

Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$20.49

Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:

Delphi temperature sensors are built with the latest OE technology
Delphi temperature sensors are impervious to electrical noise and interference
Part is validated, tested and matched to the right vehicle application
Delphi temperature sensors feature a one-piece lead-frame design from sensing element tip to connector terminals to help eliminate internal connectors and failure points

from

$78.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$39.79

NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Extensively Tested During Manufacture to Guarantee Quality and Reliability
Supplied With a Factory-Fitted OEM Connector for Easy Installation

from

$65.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$25.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK¿s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK¿s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

Air Charge Temperature Sensors are designed to meet or exceed OE specifications in form, fit and function to ensure proper monitoring of air temperature entering the engine
NTK’s Engine Coolant Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper engine operating temperature.

from

$88.99

ACDelco GM Original Equipment Manifold Absolute Pressure Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$29.99

ACDelco GM Original Equipment Air Charge Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$73.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.

from

$25.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$27.99

NTK’s Air Charge Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper monitoring of air temperature entering the engine.
The Air Charge Temperature Sensor is used by the Engine Control Unit (ECU) to measure air density for fuel mixture control, which allows it to make continuous adjustments to the engine’s air / fuel mixture for maximum fuel efficiency.

from

$24.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$22.13

The FAE Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$58.18

Water Temp. Sensor

from

$35.87

The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$30.68

Delphi’s Air Temperature Sensors are continuous function devices that change resistance inversely to temperature. They measure engine intake air temperature in the manifold, intake air duct, and air cleaner. A signal is then sent to the powertrain control module.

Product Features:

High-temperature thermoplastic shell for durability
Patented, lightweight, and cost-effective pre-mold subassembly
Design flexibility to match calibration criteria, meet mounting and packaging requirements, and integrate with systems
Customized packaging of mounting features, sealing options, connection system, and resistance output
Crimpless conductive path to the negative temperature coefficient thermistor and calibration certification for enhanced reliability and accuracy; also eliminates an electrical interface
100 percent resistance calibration verification helps ensure quality and reliability

from

$123.71

MAP Sensor

from

$84.99

ACDelco Professional Manifold Absolute Pressure Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: engine – mechanical. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$59.12

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$56.25

The ACDelco GM Original Equipment Engine Coolant Temperature Sensor monitors the engine temperature, and is a GM-recommended replacement for your vehicle’s original component. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This original equipment engine coolant temperature sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Undergo the same stringent testing process as the original part
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$55.99

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$34.99

An ACDelco Professional, premium aftermarket Engine Coolant Temperature Sensor is a high quality replacement for many vehicles on the road today. It monitors the engine temperature. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This premium aftermarket replacement engine coolant temperature sensor is manufactured to meet your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$30.49

Delphi temperature sensors are built with the latest OE technology
Delphi temperature sensors are impervious to electrical noise and interference
Part is validated, tested and matched to the right vehicle application
Delphi temperature sensors feature a one-piece lead-frame design from sensing element tip to connector terminals to help eliminate internal connectors and failure points

from

$4.99

SPLASH SHLD COWL RET

In-Demand Fuel Pumps for 1994 GMC C2500s

Select from 43 premium Fuel Pumps parts for your 1994 GMC C2500, with prices ranging from $3.99 to $1,926.99.

show more show less

from

$234.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$99.99

Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$89.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
All pumps are functionally tested for correct operation which improves pump reliability
Exact fit original equipment replacements means easy installation
Consistent pressure at all operating temperatures results in quick start-ups.
Pump is designed for diesel engines and applications
Always check fuel filter when replacing the fuel pump

from

$37.99

CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.
High-performance pump section assembly provides superior performance
Leading-edge inlet design to increase performance and efficiency, leading to longer life
High grade outer shell for life-long corrosion resistance
Optimized, precision-wound armature assembly for increased performance

from

$67.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$29.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$13.99

Filtration performance and micron rating meet or exceed OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$326.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank assemblies meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Reduce labor time up to 52% by using our fuel tank assembly which includes the fuel tank, fuel tank straps and fuel pump
Designed to ensure a debris free, clean fuel system upon replacement
Fuel tanks made with corrosion resistant, OE approved, Ni Terne steel
Proudly manufactured in Canada under stringent quality systems (QS-9000 and ISO 9002)

from

$11.99

Our team of Bosch Engineers brings the benefits of premium fuel pumps to the Automotive Aftermarket. Bosch fuel pumps are produced in the same production lines and are built then tested to the same exacting quality standards as Bosch OE fuel pumps to ensure a long, reliable service life. Get the job done right the first time, every time, with Bosch Premium fuel pumps.

Product Features:

Recommended repair accessories designed to OEM standards to improve the function of the vehicle and uphold product warranty
Multilayered filter media with 99% efficiency
Robust aluminum-, plastic-, or surface-treated steel filter housing designed to withstand high pressure thus offering a longer fuel filter service life
High micron rating comparable to OE
Always recommend replacing fuel strainer when replacing a fuel pump to ensure long and reliable service life

from

$181.99

CARQUEST fuel pump sender assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Advanced rust-inhibiting finish for long-lasting durability
High-performance pump section assembly provides superior performance
Leading-edge inlet design to reduce friction and increase performance
Gradient density strainer designed for better contamination resistance

from

$17.99

CARQUEST wiring harnesses are designed to replace worn, damaged, or corroded electrical connections, delivering reliable performance and long life.

Product Features:

Provides worry-free electrical performance
Designed to meet or exceed OE specifications

from

$79.99

Carquest Premium fuel pump hanger assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump hanger assemblies are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump hanger assemblies are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$9.49

CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$9.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$10.99

GM Genuine Parts Fuel Pump Strainers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These strainers help keep debris from entering your vehicle’s fuel pump. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps keep debris from entering fuel pump
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$76.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$79.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$103.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$39.99

ACDelco GM Original Equipment Fuel Pump and Engine Oil Pressure Indicator Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$65.99

Meets or exceeds OE specifications for fit, form & function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$81.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$56.99

New Platinum Pro Electric Fuel Pump, Digital Dash, New Strainer Required For Warranty

Product Features:

Digital Dash
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$29.99

Fuel Sender Fuel Strainer

from

$47.99

Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$169.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$289.99

Each unit is 100% computer-tested under high temperatures to meet real-world conditions.
All components used are ¿Automotive Grade¿ and have been tested to meet the harsh environment of automotive applications.
All components used are ┐Automotive Grade┐ and have been tested to meet the harsh environment of automotive applications.
Fuel Injector Pump Resistor available, where applicable (sold separately).
Fuel Injector Pump Resistor available, where applicable (sold separately)

from

$299.99

This fuel pump driver module is a direct replacement for the original equipment module. Designed to match the original fit and function, it features a plug & play connection for an easy installation.

Product Features:

Advanced replacement – this fuel pump driver module matches the latest original manufacturer technology for certain vehicles.
Durable components – features materials with higher temperature ratings to increase reliability.
Improved design – circuit board and heat sink both redesigned to solve issues in older OE designs
Made in USA – newly manufactured at an advanced facility in the United States

from

$70.99

Product Features:

Original equipment fit, form and function

from

$48.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain gears offer reliability and dependability for engine rebuilds and typical replacement jobs
Helical tooth form for quiet operation and precision machined bore for true fit
CAD designed and manufactured using premium materials to ensure optimal performance
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$1926.99

CARDONE Remanufactured Fuel Injection Pumps are application specific pumps that expand across a variety of platforms. Our diesel injector pumps are precision wound with trimmed solenoid windings to ensure accurate and precise delivery of fuel from the electronic control module (ECU). This allows for smooth engine operation, improved fuel consumption, reduced harmful emissions, instant throttle response, and optimal fuel atomization, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$1596.99

ACDelco GM Original Equipment Remanufactured Fuel Injection Pumps circulate fuel within the fuel injection system, and are GM-recommended replacements for your vehicle’s original components. The pump provides energy to produce the high pressures needed to atomize fuel at the injectors. Remanufacturing the fuel injection pump is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and completed units are tested to help ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. These fuel injection pumps will provide the same performance, durability, and service life you expect from ACDelco.

Product Features:

Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system

from

$1229.99

CARQUEST premium remanufactured fuel injection pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Does not include Pump Mounted Driver (PMD)

from

$1219.99

Each unit is 100% tested to OE specifications
Includes 100% replacement of Pump Mounted Driver (PMD)

from

$1029.99

Each unit is 100% tested to OE specifications
Includes 100% replacement of Pump Mounted Driver (PMD)

from

$938.99

This diesel fuel injection pump has been thoroughly remanufactured using an exclusive process to ensure optimum quality and reliability. Critical components are replaced and clearances are verified after cleaning, reassembly and testing.

Product Features:

Ideal replacement – this remanufactured common rail fuel injection pump restores lost performance from a worn original equipment injection pump.
Thoroughly remanufactured – this fuel injector pump has been completely disassembled, cleaned, inspected, reassembled with new internal components and tested to be leak-free.
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone calibration to application-specific requirement and tested to ensure performance

from

$152.99

Product Features:

High Pressure Fuel Lines
High Pressure Fuel Regulator
Manifold Comes Assembled
High-Flow Alum. Fuel Rails
Rails Extruded and CNC Machined
High-Tech/Pico Fuel Injection
Throttle Brackets Including
Complete Wiring Harness Including

from

$107.97

Fuel Pump

from

$38.99

All components are renewed or replaced as necessary to ensure high quality and durability
All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E. function

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$14.00

The ACDelco GM Original Equipment Fuel Pump Strainer is a GM-recommended replacement for your vehicle’s original components. Located in the fuel tank, is used to keep larger debris from entering the fuel pump intake. This original equipment strainer has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Stay with the parts brand your General Motors vehicle came with and get the quality you know and trust with ACDelco GM Original Equipment Fuel Pumps. ACDelco GM OE replacement parts give you the peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Fuel Pumps are manufactured for virtually every model of GM car, light duty truck, and sport utility vehicle. Features and Benefits:

Product Features:

Synthetic textile material typically traps particles larger than 35 microns
GM-recommended replacement part for your GM vehicle’s original factory fuel pump strainer
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$6.56

Fuel Screen

from

$3.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium strainers meet or exceed the performance of the original equipment they replace.

Product Features:

Designed with gradient density to meet or exceed OE specifications
Engineered and developed in Canada
Designed to ensure optimal filtration to prevent fuel system contamination
Strainer material tested and validated for capacity and efficiency by accredited, third party
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Engineered and developed by Spectra Premium; proud member of the A.A.S.A. fuel pump manufacturers working group

Most Sold 1994 GMC C2500 Oxygen Sensors

Explore our best-selling GMC parts for the 1994 C2500 among 9 OEM and aftermarket options starting from $29.99.

show more show less

from

$65.99

Product Features:

Reducer With O-Sensor Fitting
Made In USA

from

$31.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$37.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$55.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$32.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$69.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$29.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$65.99

Product Features:

Reducer With O-Sensor Fitting
Made In USA

from

$74.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

Top-Rated Fuel and Emissions Systems Brands For Your 1994 GMC C2500

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1994 GMC C2500s. Below you’ll find some of our best rated Fuel and Emissions Systems from Carquest Premium and Delphi, and more. Fuel and Emissions Systems from these brands that fit a 1994 C2500 start at just $1.29 and are rated as high as 4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 1994 GMC C2500 Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1994 GMC C2500, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Fuel and Emissions Systems, specifically designed for the 1994 GMC C2500. With over 76 Carquest Premium brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $1.29, with an average price of just $91.08. Plus, with over 430 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$65.99

This product is not rated

Manifold Absolute Pressure Sensor (MAP)

“”

from
$9.99

This product is not rated

Fuel Pump Strainer FS260354

“”

from
$9.49

This product is not rated

Fuel Pump Strainer FS260352

“”

Popular Delphi 1994 GMC C2500 Fuel and Emissions Systems

Delphi auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1994 GMC C2500 owner should feel confident when installing genuine Delphi parts in their vehicle. To ensure the best fit and performance for your 1994 C2500, Advance Auto Parts carries a full inventory of 20 Delphi Fuel and Emissions Systems. Plus you will be keeping your GMC in peak condition while saving money because prices on these Delphi Fuel and Emissions Systems range from $12.49 to $358.37, plus, with more than 73 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from
$12.49

This product is not rated

Fuel Tank Cleaning Kit

“”

from
$103.99

This product is not rated

Electric Fuel Pump: 12V, Diesel, With 2 Female Pin Terminals

“”

from
$81.99

This product is not rated

Electric Fuel Pump: With Hose Clamps, Hose Piece, Insulating Sleeve, Isolator, Seals

“”

FAQs for 1994 GMC C2500 Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1994 GMC C2500s?

Out of 234 Fuel and Emissions Systems that fit 1994 GMC C2500s, the following parts are the top sellers:

Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (18481528) – $14.99
Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (12102600) – $23.99
Electric Fuel Pump: With Hose Clamps, Isolator, Splices, Isolator, 2-Wire Harness w/Connector (20772154) – $67.99

What’s the price range for 1994 GMC C2500 Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1994 GMC C2500 start at $1.29 and go up to $1,926.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1994 GMC C2500?

The average price for Fuel and Emissions Systems for the 1994 GMC C2500 is $100.62. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other GMC C2500 model years?

Yes, we currently carry Fuel and Emissions Systems for 20 model years of GMC C2500s between 1979 and 2000. Fuel and Emissions Systems are bought most frequently for the following model years: 2000, 1999, 1998, 1997, 1996, 1995, 1993, 1992, and 1991.

What are the cheapest Fuel and Emissions Systems for my 1994 GMC C2500?

The cheapest 1994 GMC C2500 Fuel and Emissions Systems we carry in stock are:

Exhaust Gas Recirculation (EGR) Valve Gasket (12482002) – $1.29
Exhaust Gas Recirculation (EGR) Valve Gasket (3207781) – $1.99
Fuel Pump Mounting Gasket (19780020) – $2.99
Fuel Injector Seal Kit (11449789) – $3.79
Fuel Pump Strainer (11512827) – $3.99

What types of Fuel and Emissions Systems do you sell for my 1994 GMC C2500?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1994 GMC C2500:

Can I get help with 1994 GMC C2500 Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Fuel and Emissions Systems and more.

What is your return policy for GMC C2500 Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new GMC C2500 Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1994 GMC C2500 Fuel and Emissions Systems

ACDelco – Multi-Purpose Gasket (Part No.14025557)

Carquest Premium – Pump Mounted Driver Harness (Part No.AC20472)

Carquest – Fuel Tank Straps (Includes 2 Straps) (Part No.578-001)

Dorman – Nylon Nut – 1/4 In. (No.14) (Part No.961-351D)

Delphi – Fuel Injection Pressure Regulator (Part No.FP10021)

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPA1039)

ACDelco – EGR Valve (Part No.214-5058)

Dorman – Fuel Pump Module: Includes, Fuel Pump (Part No.2630318)

Cardone – Fuel Injector Installation Kit (Part No.2K-102)

Cardone – Diesel Fuel Injector Driver Module Resistor (Part No.2H-114)

GM Genuine Parts – Fuel Pump Driver Module with Plate and Bolts (Part No.19209057)

Dorman – 4-Wire Idle Air Control Valve (Part No.85112)

GM Genuine Parts – Fuel Injection Idle Air Control Valve (Part No.217-435)

KAI – Fuel Send/Hanger Assembly (Part No.FMD010424)

Dorman – Fuel Tank Rear Frame Crossmember (Part No.926-956)

Carquest Premium – Exhaust Gas Recirculation (EGR) Vacuum Regulator Solenoid Connector (Part No.PTA1107)

FAE – Engine Coolant Temperature Sensor (Part No.C6020175714FAE)

Dorman – Engine Vacuum Pump Pulley (Part No.300-702)

Delphi – Fuel Pump Hanger Assembly: With Float Arm, Seal, Lock Ring, O-rings (Part No.HP10000)

Dorman – Pump Mounted Driver Module Calibration Resistor Number 5 and 9 (Part No.904-107)

Spectra Premium – Fuel Tank (Part No.GM14H)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Cardone – Remanufactured Fuel Pump Driver Module (Part No.77-6382)

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Control Solenoid (Part No.EGA1132)

Delphi – Fuel Pump Strainer (Part No.FS0031)

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Control Solenoid (Part No.EGC1133)

Dorman – Help – Fuel Line Connector (Part No.55180)

Dorman – Fuel Tank Vent Rollover Valve (Part No.911-001)

Carquest Premium – Diesel Fuel Cap: 10819D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819D)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591D)

Carquest Premium – Fuel Cap: 10830, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830)

Carquest Premium – Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Carquest Premium – Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10834)

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Carquest Premium – Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10501)

Carquest Premium – Fuel Cap: 10819, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819)

Carquest Premium – Locking Fuel Cap (Part No.10591)

Carquest Premium – Locking Fuel Cap: 10591D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10591D)

Carquest Premium – Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Carquest Premium – Locking Fuel Cap: 10507, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10507)

Carquest Premium – Diesel Fuel Cap: 10830D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830D)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Carquest Premium – Locking Fuel Cap (Part No.10501D)

Motorad – Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (Part No.MGC817T)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)

Carquest Premium – Locking Fuel Cap: 17501D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.17501D)

Motorad – Tethered Fuel Cap (Part No.MGC517T)

Carquest Premium – Remanufactured Fuel Injector (Part No.A114-1193)

Dorman – Pump Driver Module Relocation Kit (Part No.904-113)

Carquest – Fuel Injector (Part No.57202)

Carquest Premium – Remanufactured Fuel Injector (Part No.A114-1093)

Dorman – Nylon Nut – 1/4 In. (No.14) (Part No.961-351D)

Carquest Premium – Remanufactured Fuel Injector (Part No.A114-1033)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS005)

Carquest Premium – Fuel Injector Connector (Part No.AC761)

Carquest – Fuel Injector (Part No.57206)

Carquest Premium – Fuel Injector Connector (Part No.ABA3464)

Carquest Premium – New Diesel Fuel Injector (Part No.AN11053)

Dorman – Pump Mounted Driver Module Calibration Resistor Number 5 and 9 (Part No.904-107)

Carquest – Fuel Injector (Part No.57020)

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD11053)

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD11043)

Carquest – Fuel Injector (Part No.57101)

Delphi – Fuel Injection Pressure Regulator (Part No.FP10729)

ACDelco – Professional Fuel Injector Assembly (Part No.C1000324311ACD)

Carquest Premium – PMD Mounting Kit (Part No.AC20672)

Felpro – Fuel Pump Mounting Gasket (Part No.70150)

Carquest Premium – Reman Throttle Body Injector (Part No.A114-1173)

ACDelco – Professional Fuel Injector Assembly (Part No.C1000580865ACD)

ACDelco – Professional Fuel Injector Assembly (Part No.C1000324407ACD)

ACDelco – Professional Fuel Injector Assembly (Part No.C1000357608ACD)

ACDelco – Throttle Body Fuel Injector Assembly (Part No.217-2286)

Cardone – Fuel Injector (Part No.2J-107)

Cardone – Fuel Injector (Part No.2J-106)

Delphi – Fuel Pressure Regula (Part No.C30002149140DEL)

Cardone – Fuel Injector Installation Kit (Part No.2K-102)

Carquest Premium – New Diesel Fuel Injector (Part No.AN11043)

Cardone – Fuel Injection Pump Installation Kit (Part No.2K-103)