1994 Dodge Ram 1500 Bodies and Fender Parts

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications are Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Foam Construction
• Meets Quality Standards
• Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
• Easy To Install

New Premium Replacement Rear Step Bumper Assembly, Chrome (Includes Inner And Outer Brackets/Pad And Lights)

Product Features:

• Chrome (Includes Inner And Outer Brackets/Pad And Lights), Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Spare tire hoist rusted out and corroded? This replacement hoist is specifically engineered to match the original design on specific vehicles, and it’s specially coated to resist future rust and corrosion.

Product Features:

• Direct replacement – this spare tire hoist is precisely engineered to replace the hoist that comes stock on specific vehicle years, makes and models
• Easy installation – simply remove the spare tire, unbolt the original part, and bolt on this replacement
• Functionality ensured – hoist appearance may vary slightly from original part but functions the same
• Corrosion resistant – specially coated to prevent future rust and corrosion

The WeatherTech MudFlap – Laser Measured for a Perfect Fit set literally mounts-in-minutes (in most applications) without the need for wheel/tire removal, and most importantly – without the need for drilling into the vehicle fragile painted metal surface Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection.

Product Features:

• Protects Your Vehicle s Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Vehicle s Wheels
• Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
• Provide Protection For Your Vehicle Most Vulnerable Rust Area
• Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Molded From A Proprietary Thermoplastic Resin
• No Drilling Required And Installs In Minutes

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
• Quality material – this retainer is made of durable material for long-lasting service.
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

New Standard Replacement Driver Side Fender Liner, All 02-05 1500, All 03-04 2500, 05 Fits RWD 2500/3500

Product Features:

• All 02-05 1500, All 03-04 2500, 05 Fits RWD 2500/3500, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New ProEFX Rear Roll Pan With License Plate

Product Features:

• With License Plate
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New ProEFX Rear Roll Pan, Without License Plate Part

Product Features:

• Without License Plate Part
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

LUND’s RX-Rivet Style fender flares are the perfect addition to lifted trucks, giving them a bold, unmistakable appearance. Designed for larger tires and wheels, LUND’s RX-Rivet Style flares will transform your Chevy Silverado, Toyota Tundra, GMS Sierra, Dodge Ram or Ford truck into an off-road, gutsy-appearing ride. This rivet style fender flare provides extra coverage on trucks with larger wheel and tire packages. Update your vehicle with an awesome, wide-body look while shielding it from road debris. The extra height of the flares is also a great quick fix for covering rust and minor damages on the fender. This distinctive fender flare, available in four-piece sets, is designed to not only add a rugged, off-road look, but also protect the sides of your vehicle from road debris and harsh outdoor elements. LUND’s RX-Rivet Style fender flares are made with ABS thermoplastic material to allow for maximum durability – providing a dense, hard and scratch-resistant surface, flexible enough to bend instead of shattering. This flare is built to last and is . Straight from the die, the flare has a satiny finish (standard) that looks great, but is easily prepped and painted for any sort of automotive paint. The flare is also available in a textured finish. Maintenance is easy! You can use any detergent you use to wash your vehicle to clean the flares as well.

Product Features:

• Bold And Aggressive Design
• Gives The Tundra Improved Protection Against Rocks And Debris
• Additional Coverage For Larger Tire And Wheel Packages
• Available In Two Finishes
• Tough And Durable Tri-Flex ABS Thermoplastic
• UV-Resistant To Protect Against Fading
• Polished Stainless Steel Hardware Included
• Easy No Drill Installation Utilizing Factory Attachment Locations
• Made In USA

LUND’s RX-Rivet Style fender flares are the perfect addition to lifted trucks, giving them a bold, unmistakable appearance. Designed for larger tires and wheels, LUND’s RX-Rivet Style flares will transform your Chevy Silverado, Toyota Tundra, GMS Sierra, Dodge Ram or Ford truck into an off-road, gutsy-appearing ride. This rivet style fender flare provides extra coverage on trucks with larger wheel and tire packages. Update your vehicle with an awesome, wide-body look while shielding it from road debris. The extra height of the flares is also a great quick fix for covering rust and minor damages on the fender. This distinctive fender flare, available in four-piece sets, is designed to not only add a rugged, off-road look, but also protect the sides of your vehicle from road debris and harsh outdoor elements. LUND’s RX-Rivet Style fender flares are made with ABS thermoplastic material to allow for maximum durability – providing a dense, hard and scratch-resistant surface, flexible enough to bend instead of shattering. This flare is built to last and is . Straight from the die, the flare has a satiny finish (standard) that looks great, but is easily prepped and painted for any sort of automotive paint. The flare is also available in a textured finish. Maintenance is easy! You can use any detergent you use to wash your vehicle to clean the flares as well.

Product Features:

• Bold And Aggressive Design
• Gives The Tundra Improved Protection Against Rocks And Debris
• Additional Coverage For Larger Tire And Wheel Packages
• Available In Two Finishes
• Tough And Durable Tri-Flex ABS Thermoplastic
• UV-Resistant To Protect Against Fading
• Polished Stainless Steel Hardware Included
• Easy No Drill Installation Utilizing Factory Attachment Locations
• Made In USA

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

• Assures Longer Lasting Cab to Bed Alignment
• Replace to Restore Ride Height
• Gain Durability
• Stronger Than Original Rubber Mounts

Durable Body Mount Set with Hardware: For Enhanced Vehicle Stability and Control

New Standard Replacement Driver Side Rocker Panel, 2 Door Extened Cab, 76.25 X 7.5 X 4.25

Product Features:

• 2 Door Extened Cab, 76.25 X 7.5 X 4.25, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Rocker Panel, Slip-On Type, Extended Cab, 77 X 5

Product Features:

• Slip-On Type, Extended Cab, 77 X 5, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Constructed From Plastic
• Hazardous Free Material
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy To Install

Westins Pro Traxx 4 Oval Nerf Step Bars feature a 4″ oval tube with a heavy-duty step pad that provides a wider and more secure step area. They feature 30° factory style bends that have seamless domed ends so there are no end-caps or exposed bolt heads. A

Product Features:

• 30 Degree Factory Style Bends At Each End Of Tube
• Fully Welded Domed Ends
• Injection Molded Polymer Step Pad
• Injection Molded Bracket Covers Incl. On Some Apps
• 4 in. Wide Step Area With Westin Logo
• Bolt On Installation; No Drill Required
• 3 Year Warranty

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Rocker Panel Mount
• Q235A Steel Finished With Titanium Black Ensures Maximum Strength And Durability: Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Welded End Caps Add A Clean, Finished Appearance While Keeping The Elements Out: Steel Mounting Brackets Are Included To Install Steps With Ease
• Oval Step Shape Offers A Wider Stepping Area For Secure Footing: 60 Degree Bent Ends Tuck Into The Vehicle Body Which Offer A Smooth, Seamless Look
• Provides Moderate Protection Against Road Hazards And Debris
• Larger Step For Secure Footing, Easy Vehicle Access With Slip-resistant Molded Step Pad
• Custom Designed For Each Application. Easy To Install

New Economy Replacement Driver Side Fender, (2002 Old Style)

Product Features:

• 2002 Old Style, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Premium Replacement Driver Side Fender

Product Features:

• Made Of Galvanized Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

New Standard Replacement Passenger Side Fender Liner, All 02-05 1500, All 03-04 2500, RWD 05 2500/3500

Product Features:

• All 02-05 1500, All 03-04 2500, RWD 05 2500/3500, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost
• Pack of 3

New Standard Replacement Driver Side Cab Floor, 46 X 15 X 10

Product Features:

• 46 X 15 X 10, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Premium Replacement Rear Step Step Bumper Face Bar, Chrome

Product Features:

• Chrome, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Economy Replacement Rear Step Bumper Face Bar, Chrome

Product Features:

• Chrome, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New, Economy Replacement Rear Bumper Face Bar, Prime Finish, Without Dual Exhaust, Without Park Assist Sensor Holes

Product Features:

• Meets All Federal Motor Safety Standards
• No Drilling Or Modifications Needed For Installation
• Same Form Fit As OE

New, Economy Replacement Rear Bumper Face Bar, Chrome Finish, Without Dual Exhaust, With Park Assist Sensor Holes

Product Features:

• Meets All Federal Motor Safety Standards
• No Drilling Or Modifications Needed For Installation
• Same Form Fit As OE