1994 Dodge Intrepid Engine Parts

Below you will find various in-demand Dodge Engine Parts, components and accessories for your 1994 Intrepid. Advance Auto Parts has popular Intrepid parts like Camshafts, Engine Mounts, Engine Gaskets and Seals and more. You’ll also find aftermarket and OEM Engine Parts for other Intrepid model years including 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 and more. Select a category of 1994 Dodge Intrepid Engine Parts below and start saving instantly.

Popular 1994 Dodge Intrepid Engine Parts Categories

Engine Valve Lifters

Oil Pumps

Oil Pan Gaskets

Camshaft Position Sensors

OE Engine Oil Coolers

Rear Main Seal Sets

Crankshaft Position Sensors

Engine Crankshaft Kits

Computer Control Relays

Cylinder Head Gaskets

Camshaft Position Sensor Connectors

Engine Oil Pump Pickup Tube and Screens

Valley Pan Gaskets

Engine Computers

Timing Cover Seals

Cylinder Head Installation Sets

Engine Valve Stem Seals

Oversized Main Bearings

Camshaft Bearings

Standard Rod Bearing Sets

Oil Pump Kits

Standard Piston Rings

Lower Gasket Sets

Timing Chains

Camshaft Seals

Standard Individual Rod Bearings

Engine Timing Belt Tensioner Pulleys

Rocker Arm Shaft Plugs

Engine Crankshaft Position Sensor Brackets

Remanufactured Engines

Cylinder Heads

Engine Assembly Lube

Engine Camshaft Cap Gaskets

Engine Oil Pump Primers

Engine Oil Pump Sleeve

Essential Engine Parts for 1994 Dodge Intrepids

from

$169.99

Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
Complete assembly – includes replacement pan and drain plugs to match original components
Durable design – high-strength coating prevents future corrosion
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$36.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$32.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$82.99

This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:

Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
Durable construction – stringent specifications and careful construction help ensure longevity
Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$257.99

Remanufactured precision machined OE crankshafts.

Product Features:

Includes matching rod and main bearings.
Journals Micropolished.
All units subject to complete quality inspection.

from

$7.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Each gasket is built to meet or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$1.29

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$81.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHRY 98-04; DODGE 98-04;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1998-2004
Weight approx: 3 Lbs
HYDRAULIC

from

$61.99

Utilizes the latest in design and technology to offer complete chain sets. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Utilizes the latest in design and technology to offer complete chain sets. Refer to our online catalog for detailed application-specific information. SET INCLUDES: S715 Engine Timing Crankshaft Sprocket (1 EA), C388 Engine Timing Chain (1 EA), S788T Engine Timing Camshaft Sprocket (1 EA).

Product Features:

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$41.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$43.99

Performance & dependability of original equipment pistons
DUROSHIELD« skirt-coated piston
Moly-graphite coating extends engine life
Reduces friction for higher fuel economy & eliminates scuffing and wear
Helps improve cylinder sealing for less blow-by
Prevents damage from inadequate lubrication on start-up

from

$16.29

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$47.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$45.99

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

Not impacted by temperature changes and provide robust, long-lasting sensor protection
Manufactured to meet or exceed OE requirements
Enhanced sensing functionality helps reduce emissions, improve reliability and drivability
Not impacted by temperature changes and provide robust, long-lasting sensor protection
Designed digital output for maximum signal to noise ratio

from

$61.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$7.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$21.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$94.99

ENG TMNG BLT TNSPLLY

from

$45.99

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Dramatically reduces or eliminates bearing wear
Made with silicon to provide greater surface hardness
Silicon particles help polish crankshaft journal to further reduce wear during operation
Utilizes ISO & QS certified manufacturing

from

$33.99

Made In USA. A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.

Product Features:

Manufactured from high quality durable materials for long wear
Precision engineering protects the engine from dirt and contaminants
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$10.49

Formulated for prelubrication cam lobes, lifters & engine bearings
Increases load carrying capacity
Holds fast to surfaces
Exacting tolerances
Meets or exceeds OEM specifications
4.0 oz. Squeeze Container

from

$17.99

This engine oil filter cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this engine oil filter cap is designed to match the fit and function of the original cap on specified vehicles
Restores functionality – reliable replacement for an original part that is missing or cracked due to heat and fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$54.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$19.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$58.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

from

$36.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$229.99

CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100 percent computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.

Product Features:

Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
On-car vehicle validation is done to test durability and performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$46.99

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

Upgrade your 1994 Dodge Intrepid with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1994 Dodge Intrepid, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Engine Parts are key to keeping your Intrepid functioning at its best. At Advance Auto Parts, we offer a wide selection of 74 Engine Parts for the 1994 Dodge Intrepid, designed to meet your needs without breaking the bank. From Camshaft replacements to Engine Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1994 Dodge Intrepid at great prices. Our Engine Parts inventory for this model ranges from just $1.29 to $2,377.99, with an average price of $86.70. Our 74 Engine Parts in stock come from 16 trusted brands, so you’re sure to find the right part for your 1994 Dodge Intrepid without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1994 Dodge Intrepid, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, Carquest Premium, Imperial, and more. FELPRO Engine Parts start at just $8.99 and boast an impressive 4.6 stars average rating from customers. Carquest Premium and Imperial also bring quality to the table, with Engine Parts available starting at $6.99, and at an average 4.4 stars rating. With 394 customer reviews and counting, our 1994 Dodge Intrepid Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1994 Dodge Intrepid is always ready to roll. We’re committed to providing you with everything you need to keep your Intrepid in top shape, all in one place. Start shopping confidently below for your 1994 Dodge Intrepid!

Best-Selling Camshafts for 1994 Dodge Intrepids

Enhance the driving experience in your Dodge with 8 quality Camshaft components, starting at $2.99.

show more show less

from

$38.99

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
O-rings and seals are included if required.
Weather-tight connectors prevent leaks and corrosion for better reliability.
Extensive design validation testing and 100% end-of-line tested.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$54.99

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
O-rings and seals are included if required.
Weather-tight connectors prevent leaks and corrosion for better reliability.
Extensive design validation testing and 100% end-of-line tested.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$61.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$36.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$19.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$16.29

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$7.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Each gasket is built to meet or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$2.99

This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Popular 1994 Dodge Intrepid Engine Mounts

Customize your Dodge with 1 Engine Mounts products like Engine Mounts, all priced under $20.99.

show more show less

from

$20.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHRY 93-97; DODGE 93-97; EAGLE 93-97;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1993-1997
Weight approx: 4 Lbs
HYDRAULIC
PART GROUP: 2795, 2795, 2810

Top Picks for 1994 Dodge Intrepid Engine Gaskets and Seals

Upgrade Dodge Intrepids with top-quality Engine Gaskets and Seals parts, including 5 OEM and aftermarket selections for your 1994 model.

show more show less

from

$32.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$36.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$19.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$30.49

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$67.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

In-Demand Engine Timing Parts for 1994 Dodge Intrepids

Select from 9 premium Engine Timing Parts parts for your 1994 Dodge Intrepid, with prices ranging from $4.99 to $94.99.

show more show less

from

$12.49

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$7.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$4.99

Product Features:

Brand may vary by location

from

$61.99

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$12.49

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$46.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$27.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$12.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$94.99

ENG TMNG BLT TNSPLLY

Most Sold 1994 Dodge Intrepid Valve Cover and Cylinder Heads

Explore our best-selling Dodge parts for the 1994 Intrepid among 7 OEM and aftermarket options starting from $1.29.

show more show less

from

$21.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$325.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$126.99

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$24.99

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$19.99

from

$10.49

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$1.29

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Top-Rated Engine Parts Brands For Your 1994 Dodge Intrepid

Shop for the best-rated brands offering Engine Parts and other products for your 1994 Dodge Intrepids. Below you’ll find some of our best rated Engine Parts from FELPRO, Carquest Premium, and Imperial, and more. Engine Parts from these brands that fit a 1994 Intrepid start at just $6.99 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1994 Dodge Intrepid Engine Parts

When it comes to maintaining or upgrading your 1994 Dodge Intrepid, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 1994 Dodge Intrepid. With over 3 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.99, with an average price of just $22.99. Plus, with over 59 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $8.99

(2)

CRANKSHAFT FRONT SEAL SET

“Better material than the original. Reasonably priced. No fuss installation. And Advance was the only shop in the area that stocked it. Win-win.”

from $26.99

(2)

Engine Crankshaft Seal Kit

“Like original”

from $32.99

(55)

Engine Oil Pan Gasket Set – PermaDry molded rubber, Oil Pan SnapUps Included

“Fast easy to install, great quality”

Popular Carquest Premium 1994 Dodge Intrepid Engine Parts

Carquest Premium auto parts is one of the highest quality Engine Part brands in the market. Any 1994 Dodge Intrepid owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1994 Intrepid, Advance Auto Parts carries a full inventory of 2 Carquest Premium Engine Parts. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Carquest Premium Engine Parts range from $6.99 to $13.99, plus, with more than 59 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $6.99

(15)

Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

“Direct fit for 194 gif 350”

from $13.99

(44)

Engine Oil Filler Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack

“WONT BREAK AS EASY AS OE DID”

FAQs for 1994 Dodge Intrepid Engine Parts

Which Engine Parts are best-sellers for 1994 Dodge Intrepids?

Out of 74 Engine Parts that fit 1994 Dodge Intrepids, the following parts are the top sellers:

Engine Valve Lifter (3718840) – $21.99
Engine Oil Filler Cap (11412447) – $17.99
CRANKSHAFT FRONT SEAL SET (11372819) – $8.99

What’s the price range for 1994 Dodge Intrepid Engine Parts?

Engine Part prices for the 1994 Dodge Intrepid start at $1.29 and go up to $2,377.99 for the most premium parts.

What’s the average price of a Engine Part for a 1994 Dodge Intrepid?

The average price for Engine Parts for the 1994 Dodge Intrepid is $86.70. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Dodge Intrepid model years?

Yes, we currently carry Engine Parts for 10 model years of Dodge Intrepids between 1993 and 2004. Engine Parts are bought most frequently for the following model years: 2004, 2003, 2002, 2001, 2000, 1999, 1998, 1997, and 1996.

What are the cheapest Engine Parts for my 1994 Dodge Intrepid?

The cheapest 1994 Dodge Intrepid Engine Parts we carry in stock are:

Steel Cup Expansion Plug 7/16 In. SC, Height 0.170 (sold by each) (22140418) – $1.29
Steel Cup Expansion Plug 45/64 In., Height 0.220 (sold by each) (22140461) – $1.79
Steel Cup Expansion Plug 2-9/32 In., Height 0.240 (sold by each) (22140445) – $2.99
Oil Seal (10426039) – $4.99
Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (18481405) – $6.99

What are the top-rated Engine Parts that fit the 1994 Dodge Intrepid?

Out of 394 reviews by customers, our 1994 Dodge Intrepid Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1994 Dodge Intrepid and their top-rated products:

Valve Cover and Cylinder Heads
- Engine Valve Lifter (3718840) – $21.99
Engine Gaskets and Seals
- Engine Valve Lifter (3718840) – $21.99

What types of Engine Parts do you sell for my 1994 Dodge Intrepid?

As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 1994 Dodge Intrepid:

Can I get help with 1994 Dodge Intrepid Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Engine Parts and more.

What is your return policy for Dodge Intrepid Engine Parts?

Advance Auto Parts keeps returns simple. For new Dodge Intrepid Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1994 Dodge Intrepid Engine Parts

Dorman – Engine Oil Pan: Direct Fit, Aluminum, Sump, 5 Quart (Part No.264-332)

Sealed Power – Engine Camshaft Bearing Set (Part No.1809M)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber, Oil Pan SnapUps Included (Part No.OS 30622 R)

Dorman – Harmonic Balancer Assembly (Part No.594-183)

Crankshaft Rebuilders – Remanufactured Crankshaft Kit (Part No.13350)

Felpro – Engine Camshaft Retainer Gasket (Part No.ES 73216)

Dorman – Steel Cup Expansion Plug 7/16 In. SC, Height 0.170 (sold by each) (Part No.555-003)

Anchor – Engine Mount: Front Left, 1 Piece (Part No.2942)

Cloyes Gear – Engine Timing Set (Part No.C-3077)

National – Shaft Repair Sleeve (Part No.99128)

Sealed Power – Engine Piston Set (Part No.574CP .50MM)

FAG US – General Seal (Part No.SS2257)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9514 PT)

Delphi – Engine Crankshaft Position Sensor (Part No.SS11390)

Carquest Premium – Multi-Use Connector (Part No.PTC3102)

Felpro – Engine Camshaft Seal (Part No.TCS 45939)

Sealed Power – Engine Valve Lifter (Part No.HT-2269)

INA US – ENG TMNG BLT TNSPLLY (Part No.ZT03771)

Sealed Power – Engine Connecting Rod Bearing Set (Part No.6-1920RA)

Melling – Stock Replacement Oil Pump Screen (Part No.264S)

Sealed Power – Engine Assembly Lubricant (Part No.55-400)

Dorman – Help – Engine Oil Filler Cap (Part No.80984)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S862)

National – Multi-Purpose Seal (Part No.710056)

Felpro – Engine Conversion Gasket Set (Part No.CS 9425)

Felpro – Valley Pan Gasket Set (Part No.MS 96042)

Cardone – Remanufactured Engine Control Computer (Part No.79-3136)

Cloyes Gear – Engine Timing Chain (Part No.C388)

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA1497)

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA1328)

Carquest Premium – Multi-Use Connector (Part No.PTC3102)

Sealed Power – Engine Camshaft Bearing Set (Part No.1809M)

National – Multi-Purpose Seal (Part No.321417N)

FAG US – General Seal (Part No.SS2257)

Felpro – Engine Camshaft Retainer Gasket (Part No.ES 73216)

Dorman – Steel Cup Expansion Plug 2-9/32 In., Height 0.240 (sold by each) (Part No.555-124)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2795)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber, Oil Pan SnapUps Included (Part No.OS 30622 R)

Felpro – Valley Pan Gasket Set (Part No.MS 96042)

National – Multi-Purpose Seal (Part No.710056)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72842)

Felpro – Engine Conversion Gasket Set (Part No.CS 9926)

National – Multi-Purpose Seal (Part No.3638)

Felpro – Engine Camshaft Seal (Part No.TCS 45939)

Driveworks – Oil Seal (Part No.S-3638)

Cloyes Gear – Engine Timing Set (Part No.C-3077)

National – Multi-Purpose Seal (Part No.3655)

Cloyes Gear – Engine Timing Chain (Part No.C388)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S788T)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S715)

INA US – ENG TMNG BLT TNSPLLY (Part No.ZT03771)

Sealed Power – Engine Valve Lifter (Part No.HT-2269)

Spartan – Engine Cylinder Head; Chry 3.3/3.8 90-97 Head (Part No.2D51)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HIS 9673 PT)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9926 PT)

Sealed Power – Engine Exhaust Valve (Part No.V-4481)

Sealed Power – Engine Valve Lifter (Part No.HT-2269B)

Dorman – Steel Cup Expansion Plug 7/16 In. SC, Height 0.170 (sold by each) (Part No.555-003)