1994 Chevrolet G10 Differentials

Essential 1994 Chevrolet G10 Differentials

Richmond Gear – RngPnnInstlKt (Part No.83-1018-B)

RngPnnInstlKt

from

$39.49
RngPnnInstlKt

Yukon Gear – Ring Gear Bolt (Part No.33046)

Ring Gear Bolt

from

$6.99
Ring gear bolt for GM 12 bolt car & truck, 8.2″, 8.2″ for Buick/Olds/Pontiac, 63-79 Corvette & 55-62 GM Car & Truck. 3/8″ x 24.

Product Features:
  • Ring gear bolt for GM 12 bolt passenger car and truck, 1955-1964 passenger car and truck, GM 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and 1963-1979 Corvette
  • 3/8″ x 24 thread
See More

Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-500)

Differential Yoke including Seal and Pinion Nut

from

$139.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Yukon Gear – 18 Plate Steel Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16110)

18 Plate Steel Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$483.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 18 piece kit
  • Steel clutches
See More

Yukon Gear – Chrome Cover For GM 12 Bolt Truck (Part No.32012)

Chrome Cover For GM 12 Bolt Truck

from

$64.99
Chrome cover for GM 12T.

Product Features:
  • Fits GM 12 bolt truck
  • Chrome
See More

FAG US – CONE (Part No.KLM603049)

CONE

from

$23.79
CONE

Pro-King – Differential Cross Shaft (Part No.742G673)

Differential Cross Shaft

from

$28.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Bearing Race Driver (Part No.56023)

Bearing Race Driver

from

$219.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M88010 race
  • All steel construction
See More

Yukon Gear – Cross Pin Bolt (Part No.33067)

Cross Pin Bolt

from

$6.99
Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.

Product Features:
  • Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS
See More

Yukon Gear – Dura Grip Positraction For GM 8.5" With 28 Spline Axles (Part No.26015)

Dura Grip Positraction For GM 8.5" With 28 Spline Axles

from

$859.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit has larger bearing journals for added strength & uses heavy-duty carrier bearings & races.

Product Features:
  • Fits GM 8.5″ with 28 spline axles
  • 2.73 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

USA Standard Gear – Master Overhaul Kit for the GM 12T Differential (Part No.37043)

Master Overhaul Kit for the GM 12T Differential

from

$194.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits GM 12 bolt truck
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R10REMK)

Differential Master Bearing Kit - Koyo

from

$113.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • GM 10 BOLT 8.5″ MSTR KIT W/EATON OR AUBURN PRO
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

Yukon Gear – Carrier Installation Kit For GM 8.5" Differential With HD Bearings (Part No.57009)

Carrier Installation Kit For GM 8.5" Differential With HD Bearings

from

$148.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.5″ differential with HD bearings for large journal carrier. This kit contains carrier bearings, races and shims. This kit is used in 8.5″ differentials using a Yukon Dura Grip, Eaton posi, ValueTrac, True Trac, Pro-Series Auburn, Detroit Locker or standard carrier with large bearing journals.

Product Features:
  • Fits GM 8.5″ with aftermarket positraction
  • Works with Heavy Duty Bearings
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Motive Gear – Differential Carrier (Part No.GM8.6L)

Differential Carrier

from

$221.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More

Pro-King – Differential Internal Nest Kit (Part No.742G717A)

Differential Internal Nest Kit

from

$179.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-531)

Differential Pinion Yoke Assembly

from

$315.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1104)

Differential Pinion Shim Kit

from

$12.99


Product Features:
  • KIT SHIM
See More

Yukon Gear – Pinion Nut Washer (Part No.33167)

Pinion Nut Washer

from

$14.99
Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

Product Features:
  • Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.
See More

Yukon Gear – 8.2" & 8.5" Rear Cover Gasket (Part No.23020)

8.2" & 8.5" Rear Cover Gasket

from

$10.99
8.2″ & 8.5″ rear cover gasket.

Product Features:
  • Cover gasket
  • Fits GM 8.2″, 8.5″ and 8.6″
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Yukon Gear – Set Up Bearing (Part No.56045)

Set Up Bearing

from

$153.99
M802048 set-up bearing (one bearing). No return.

Product Features:
  • Set up bearing
  • Fits M802048 pinion bearing
  • Easily slips on and off pinion journal to allow for easier pinion depth adjustment
See More

Yukon Gear – Pinion Install Kit For GM 12 Bolt Truck Differential (Part No.13057)

Pinion Install Kit For GM 12 Bolt Truck Differential

from

$232.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits GM 12 bolt truck
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Mini Spool For GM 12 Bolt Car & Truck With 30 Spline Axles (Part No.32227)

Mini Spool For GM 12 Bolt Car & Truck With 30 Spline Axles

from

$194.99
Mini Spool for GM 12P and 12T with 30 spline axles. Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 12 bolt passenger car and truck
  • Provides 100% traction to both wheels at all times
  • Installs into standard open carrier case
See More

Motive Gear – Differential Carrier Gear Kit (Part No.GM10BI-30)

Differential Carrier Gear Kit

from

$153.99


Product Features:
  • GM10 BOLT 8.5″ 30 SPL INTERNAL KIT 1988-1999 (OPEN)
See More

Yukon Gear – High Performance Ring & Pinion "Thick" Gear Set For GM 12 Bolt Truck In A 3.73 Ratio (Part No.24129)

High Performance Ring & Pinion "Thick" Gear Set For GM 12 Bolt Truck In A 3.73 Ratio

from

$384.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This is a thick gear set for a 3.42 & down carrier.

Product Features:
  • Fits GM 12 bolt truck
  • 8.875″ ring gear diameter
  • 30 spline pinion
  • 12 ring gear bolts
  • 3.73 ratio
  • Thick gear for 3.42 and down carrier
See More

Yukon Gear – Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5" (Part No.55001)

Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5"

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 7.5″, GM 7.5″, 7.625″, 7.6″ IFS, 7.6″ IRS, 7.75″, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and GM 8.5″ front and rear
  • Interlocking design makes installation much easier
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

1994 Chevrolet G10 Differentials

Maybe you’re in the middle of a full rebuild of that 1994 Chevrolet G10. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 193 different Differentials in our inventory ranging from $1.99 to $1,638.99. That means you can find the exact parts or products you need to keep that 1994 Chevrolet G10 running smoothly.

Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1994 Chevrolet G10. Valvoline, FELPRO, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1994 Chevrolet G10, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 562 reviews in this category, some of the top rated parts include Rear Differential Cover with 4.1 stars and Differential Shaft Lock Bolt with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1994 Chevrolet G10 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1994 Chevrolet G10 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1994 Chevrolet G10 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your G10 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Driveworks Differentials

We carry Driveworks parts in our stock across Differential Pinion Seals categories, plus more. For a 1994 Chevrolet G10, our most popular Driveworks Differentials include:
Oil Seal
from $7.79
(1)
Oil Seal
Differential Pinion Seals

Top 1994 Chevrolet G10 Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1994 Chevrolet G10. Popular Felpro parts include:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Differential Cover Gaskets

FAQs for 1994 Chevrolet G10 Differentials

What are the most purchased Differentials for the 1994 Chevrolet G10?

Out of 193 Differentials for the 1994 Chevrolet G10, the most popular in our inventory are:
DEX/MERC Automatic Transmission Fluid, 1 Gallon
from $35.99
(17)
DEX/MERC Automatic Transmission Fluid, 1 Gallon
Differential Oil
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil

What are the top-rated 1994 Chevrolet G10 Differentials?

Top-rated Differentials for your 1994 Chevrolet G10 based on customer reviews/ratings are:
Rear Differential Cover
from $32.99
(14)
Rear Differential Cover
“Heavy steel with the original magnet. Fits like original.. Not a cheap stamping by any means”
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
“great”
Differential Yoke including Seal and Pinion Nut
from $139.99
(10)
Differential Yoke including Seal and Pinion Nut
“Will this fot 2001 jeep grand cherokee 4.0 limited with dana 35 read end”