1994 Chevrolet C3500 Performance Ignition Products

Essential 1994 Chevrolet C3500 Performance Ignition Products

MSD Ignition – Wire Set; Street Fire; Multi-Angle plug; HEI; Universal (Part No.5550)

Wire Set; Street Fire; Multi-Angle plug; HEI; Universal

from

$72.39
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

MSD Ignition – Wire Set; Street Fire; Chevy Truck 305-350; 85-on (Part No.5562)

Wire Set; Street Fire; Chevy Truck 305-350; 85-on

from

$60.29
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

MSD Ignition – Wire Set; Street Fire; SBC; Socket Cap; under Manif (Part No.5564)

Wire Set; Street Fire; SBC; Socket Cap; under Manif

from

$65.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy with HEI Cap (Part No.35593)

Wire Set; Black Super Conductor; Small Block Chevy with HEI Cap

from

$109.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
  • For high EMI suppression
  • Conductor core features Dupont Kevlar material
  • Proprietary compound sleeves for resistance to high heat/abrasion
See More

MSD Ignition – Wire Set; Street Fire; SBC; Socket Distributor Cap over VC (Part No.5565)

Wire Set; Street Fire; SBC; Socket Distributor Cap over VC

from

$72.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

MSD Ignition – Wire Set; Super Conductor; Chevy Pickup; Dually with 454; 96-99 (Part No.32109)

Wire Set; Super Conductor; Chevy Pickup; Dually with 454; 96-99

from

$254.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Bolt-on Performance
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
  • Conductor core features DuPont Kevlar material for increased tensile strength
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

MSD Ignition – Wire Set; Street Fire; Chevy 454; 88-on (Part No.5569)

Wire Set; Street Fire; Chevy 454; 88-on

from

$72.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)

Coil; GM External HEI Coil; High Performance

from

$71.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:
  • Direct performance replacement for GM dual connector coil
  • 100:1 Turns Ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Works w/Stock Ignition As Well As MSD Ignitions
See More

Accel – Hei Remote Mount Super Coil (Part No.140024)

Hei Remote Mount Super Coil

from

$65.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Can also work with CD ignition systems. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Comes complete with new mounting hardware. High dielectric strength ACCEL yellow over molded housing. Output is 48,000 volts with 0.2ohms resistance.

Product Features:
  • Remote Mount Ignition Coil
  • Higher Energy/Voltage Outputs
  • Quicker Starts
  • Improved Throttle Response
  • More High RPM Power
  • Increase Energy Transfer
  • Resist Corrosion
  • W/New Mounting Hardware
See More

Accel – GM 1984-95 Remote Supercoil (Part No.140011)

GM 1984-95 Remote Supercoil

from

$79.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Complete with new mounting hardware.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Highly Specialized Silicone Magnetic Steel Cores
  • Standard Motor Products SMP DR-37
  • MSD 8226
  • Resist Corrosion
  • W/New Mounting Hardware
See More

Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)

High Energy Ignition Coil for GM HEI - 1973-1991

from

$100.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Highly Specialized Silicone Magnetic Steel Cores
  • Standard Motor Products SMP Dr-31
  • MSD 8225
See More

MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)

Mod HEI Dust Cover, V8 & Odd Fire V6

from

$72.99
Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.

Product Features:
  • Externally mounted coil
  • Increases reliability
  • Increase performance
  • High quality plastic
  • Resist spark loss
  • Use brass conductors
  • Low resistance connections
  • No modifications
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

MSD Ignition – Crank Trigger Kit; Small Block Chevy (Part No.8610)

Crank Trigger Kit; Small Block Chevy

from

$443.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:
  • 7 in. Diameter
  • Absolutely the most accurate way to trigger the ignition.
  • The non-magnetic pickup cannot be false triggered.
  • Powerful magnets are embedded in a billet aluminum trigger wheel.
See More

MSD Ignition – Crank Trigger Kit; Small Block Chevy; 6? Balancer (Part No.8600)

Crank Trigger Kit; Small Block Chevy; 6? Balancer

from

$461.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:
  • 6.25 in. Diameter
  • Absolutely the most accurate way to trigger the ignition.
  • The non-magnetic pickup cannot be false triggered.
  • Powerful magnets are embedded in a billet aluminum trigger wheel.
See More

1994 Chevrolet C3500 Performance Ignition Products

Maybe you’re in the middle of a full rebuild of that 1994 Chevrolet C3500. Maybe you just need a couple of Performance Ignition Products. Either way, Advance Auto Parts has 10 different Performance Ignition Products in our inventory ranging from $30.49 to $461.99. That means you can find the exact parts or products you need to keep that 1994 Chevrolet C3500 running smoothly.

Performance Ignition Products are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1994 Chevrolet C3500. MSD Ignition, Accel, and Mallory are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Ignition Products for your 1994 Chevrolet C3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 47 reviews in this category, some of the top rated parts include Wire Set; Street Fire; SBC; Socket Distributor Cap over VC with 2.5 stars and Wire Set; Street Fire; SBC; Socket Cap; under Manif with 5.0 stars.

So if you’re in the market for aftermarket Performance Ignition Products to keep your 1994 Chevrolet C3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Ignition Products Brands To Make Your 1994 Chevrolet C3500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1994 Chevrolet C3500 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Ignition Products make up Advance Auto Parts’ inventory, and all are ready to help make your C3500 the best it can be. Be sure to browse some of our top Performance Ignition Products brands and parts.

Popular Mallory Performance Ignition Products

We carry Mallory parts in our stock across Performance Ignition Parts categories, plus more. For a 1994 Chevrolet C3500, our most popular Mallory Performance Ignition Products include:
Unilite Ignition Module
from $85.29
(3)
Unilite Ignition Module
Performance Ignition Parts

Top 1994 Chevrolet C3500 Performance Ignition Products from Accel

Accel products are another trusted brand when it comes to Performance Ignition Products for your 1994 Chevrolet C3500. Popular Accel parts include:
GM 1984-95 Remote Supercoil
from $79.99
(15)
GM 1984-95 Remote Supercoil
Performance Coils

FAQs for 1994 Chevrolet C3500 Performance Ignition Products

What are the most purchased Performance Ignition Products for the 1994 Chevrolet C3500?

Out of 10 Performance Ignition Products for the 1994 Chevrolet C3500, the most popular in our inventory are:
Wire Set; Street Fire; Chevy Truck 305-350; 85-on
from $60.29
(2)
Wire Set; Street Fire; Chevy Truck 305-350; 85-on
Performance Spark Plug Wires
Coil; GM External HEI Coil; High Performance
from $71.99
(3)
Coil; GM External HEI Coil; High Performance
Performance Coils
Wire Set; Black Super Conductor; Small Block Chevy with HEI Cap
from $109.99
This product is not rated
Wire Set; Black Super Conductor; Small Block Chevy with HEI Cap
Performance Spark Plug Wires

What are the top-rated 1994 Chevrolet C3500 Performance Ignition Products?

Top-rated Performance Ignition Products for your 1994 Chevrolet C3500 based on customer reviews/ratings are:
Wire Set; Street Fire; SBC; Socket Distributor Cap over VC
from $72.99
(2)
Wire Set; Street Fire; SBC; Socket Distributor Cap over VC
“I exchanged the set for the correct set at local store.”
Wire Set; Street Fire; SBC; Socket Cap; under Manif
from $65.99
(1)
Wire Set; Street Fire; SBC; Socket Cap; under Manif
“Blinding a 327 for a 1953 Chevy pickup”