1994 Buick Skylark Engine Parts

Name: Stock Replacement OE Type High Volume Oil Pump
Brand: Melling
SKU: M134HV
Price: 129.99 USD

Below you will find various in-demand Buick Engine Parts, components and accessories for your 1994 Skylark. Advance Auto Parts has popular Skylark parts like Engine Mounts, Valve Cover and Cylinder Heads, Camshafts and more. You’ll also find aftermarket and OEM Engine Parts for other Skylark model years including 1989, 1990, 1991, 1992, 1993, 1995, 1996, 1997, 1998 and more. Select a category of 1994 Buick Skylark Engine Parts below and start saving instantly.

Popular 1994 Buick Skylark Engine Parts Categories

Engine Valve Lifters

Valve Cover Gaskets

Engine Mount and Torque Struts

Oil Pumps

Oil Pan Gaskets

Camshaft Position Sensors

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Engine Oil Dip Stick Tube O-Rings

Crankshaft Position Sensors

Harmonic Balancers

Timing Cover Gasket Sets

Powertrain Control Modules

Camshaft Position Sensor Connectors

Engine Oil Dipsticks

Timing Chain Tensioners

Engine Oil Pump Pickup Tube and Screens

Engine Computers

O-Rings

Timing Cover Repair Sleeves

Oil Pump Shafts

Timing Cover Seals

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Standard Piston Rings

Timing Chains

Engine Valve Springs

Standard Individual Rod Bearings

Oil Pump Nylon Shaft Guides

Engine Valves

Engine Oil Filler Cap Seals

Timing Crank Gears

Expansion Plug – Pipes

Timing Dampers

Engine Cylinder Head Plugs

Engine Valve Locks

Remanufactured Engines

Cylinder Heads

Engine Assembly Lube

Engine Oil Pump Primers

Essential Engine Parts for 1994 Buick Skylarks

from

$129.99

Made in USA. Melling high volume oil pumps increase the amount of oil flow by an average of 20% through the engine improving oil pressure at idle providing dependable performance every time in every application. Every Melling high volume oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling high volume oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. High volume gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
High volume oil pump supplies additional oil to engines when necessary for high performance applications or low oil pressure issues

from

$53.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Meet or exceed OEM performance requirements. Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience.

Product Features:

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$28.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Includes timing cover seal and harmonic balancer sleeve
Solves the oil leaking around timing cover seal
Made of stainless steel
Takes up gaps caused by worn-out harmonic balancer shafts

from

$70.99

Powerbond Premium OEM Replacement Balancers are manufactured using premium ductile iron castings and injection bonded dampening rubber. Unlike typical original equipment balancers that are made with press inserted dampening rubber, the bonded dampening rubber in the Powerbond Premium OEM Replacement Balancer provides superior bonding strength between the inner and outer balancer rings that minimizes spinning and dislocation in high torque and serpentine belt appplications. With a unique combination of high strength castings, bonded dampening rubber, and dynamic balance, the Powerbond Premium OEM Replacement Balancer is the ultimate standard replacement balancer.

Product Features:

Designed as a premium OE replacement
Dynamically balanced for smooth operation
Strong Iron casting for maximum strength
OEM equivalent bonded rubber

from

$34.99

The engine lubrication system is critical to engine operation and long life. On some vehicle applications, the engine control module monitors the engine oil level to ensure lubrication is not lost.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$6.49

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$15.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$32.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$6.99

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

Provides proper seal to ensure leak prevention
Stops engine blow by
High quality construction
Meets all OEM specifications

from

$29.49

Made In USA. A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.

Product Features:

Manufactured from high quality durable materials for long wear
Precision engineering protects the engine from dirt and contaminants
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$11.49

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$12.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 95-98; CHEV 95-96; OLDS 95-98; PONT 94-98;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1994-1998
Weight approx: 2 Lbs

from

$2.49

Sealed Power Vintage parts provide coverage for applications over 35 years old, restoring classics with like-new performance. Leading-edge materials and ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Product Features:

State-of-the-art manufacturing
Exceptional material quality
Exacting tolerances
Heat treated tips
Stock or mild modified replacement
Made in USA

from

$15.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$29.99

Product Features:

Design type: springless; multi-lip
Temperature range: -100 deg. F to 450 deg. F / -73 deg. C to 232 deg.
Excellent dry running capabilities
Low coefficient of friction
Delivers quality and reliable performance for every type of repair

from

$54.99

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Dramatically reduces or eliminates bearing wear
Made with silicon to provide greater surface hardness
Silicon particles help polish crankshaft journal to further reduce wear during operation
Utilizes ISO & QS certified manufacturing

from

$158.99

CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100 percent computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.

Product Features:

Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
On-car vehicle validation is done to test durability and performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$20.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$67.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$144.99

Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
On-car vehicle validation is done to test durability and performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$12.79

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
Thermoplastic housing withstands heat stress for enhanced durability
Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
Neodymium magnet produces max high voltage output at all speeds

from

$113.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$15.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$45.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$19.79

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$5.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$18.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$12.99

Spectre’s Chevrolet dipstick is designed to fit 1955 – 1979 265 – 400 short block engines. The housing and handle are triple chrome-plated steel, and the dipstick features a gold iridite finish for clear accurate oil level readings. This dipstick is made to meet OEM specifications for form, fit and function and feature an adjustable bracket for easy installation.

Product Features:

Fits 1955 – 1979 Chevy short block engine
Designed to meet OEM specifications
Gold iridite dipstick
Chrome plated housing and handle
Dipstick is easy to read for accurate oil level readings

Upgrade your 1994 Buick Skylark with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1994 Buick Skylark, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Engine Parts are key to keeping your Skylark functioning at its best. At Advance Auto Parts, we offer a wide selection of 98 Engine Parts for the 1994 Buick Skylark, designed to meet your needs without breaking the bank. From Engine Mount replacements to Valve Cover and Cylinder Heads upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1994 Buick Skylark at great prices. Our Engine Parts inventory for this model ranges from just $0.65 to $1,912.99, with an average price of $69.62. Our 98 Engine Parts in stock come from 18 trusted brands, so you’re sure to find the right part for your 1994 Buick Skylark without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1994 Buick Skylark, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, National, Dorman, and more. FELPRO Engine Parts start at just $15.99 and boast an impressive 4.6 stars average rating from customers. National and Dorman also bring quality to the table, with Engine Parts available starting at $5.49, and at an average 4.3 stars rating. With 697 customer reviews and counting, our 1994 Buick Skylark Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1994 Buick Skylark is always ready to roll. We’re committed to providing you with everything you need to keep your Skylark in top shape, all in one place. Start shopping confidently below for your 1994 Buick Skylark!

Best-Selling Engine Mounts for 1994 Buick Skylarks

Enhance the driving experience in your Buick with 2 quality Engine Mount components, starting at $9.99.

show more show less

from

$32.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BUIC 92-98; CHEV 92-02; OLDS 92-98; PONT 92-02;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1992-2002
Weight approx: 3 Lbs
HYDRAULIC
INSERT ONLY

from

$9.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 92-94; CHEV 92-96; OLDS 92-95; PONT 92-98;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1992-1998
Weight approx: 2 Lbs

Most Popular 1994 Buick Skylark Valve Cover and Cylinder Heads

Customize your Buick with 10 Valve Cover and Cylinder Heads products like Engine Valve Lifters, Cylinder Head Bolt Sets, and Push Rods, all priced under $303.99.

show more show less

from

$6.79

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

State-of-the-art manufacturing
Exceptional material quality
Exacting tolerances
Heat treated tips
Stock or mild modified replacement
Made in USA

from

$15.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$19.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$18.99

from

$0.65

from

$24.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$2.99

This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$303.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$19.79

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$7.49

Top Picks for 1994 Buick Skylark Camshafts

Upgrade Buick Skylarks with top-quality Camshafts parts, including 4 OEM and aftermarket selections for your 1994 model.

show more show less

from

$32.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$44.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$20.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$42.99

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
O-rings and seals are included if required.
Weather-tight connectors prevent leaks and corrosion for better reliability.
Extensive design validation testing and 100% end-of-line tested.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

In-Demand Engine Gaskets and Seals for 1994 Buick Skylarks

Select from 13 premium Engine Gaskets and Seals parts for your 1994 Buick Skylark, with prices ranging from $4.99 to $52.99.

show more show less

from

$29.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Valve cover gasket set contains all the gaskets required – may also contain spark plug tube seals and grommets if necessary.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$37.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$12.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$15.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$5.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$36.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$52.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$36.49

GM Genuine Parts Engine Valve Cover Gasket are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$27.49

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$33.99

Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds OE specifications
Zero engine leakage for late model vehicles.

from

$5.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$4.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

Most Sold 1994 Buick Skylark Engine Timing Parts

Explore our best-selling Buick parts for the 1994 Skylark among 12 OEM and aftermarket options starting from $13.99.

show more show less

from

$18.79

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$28.99

Includes timing cover seal and harmonic balancer sleeve
Solves the oil leaking around timing cover seal
Made of stainless steel
Takes up gaps caused by worn-out harmonic balancer shafts

from

$32.99

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$15.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$43.99

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$46.99

Sprockets Are Made From High Alloy Steel, and Heat-Treated For Durability. Chain Is Pre-Stressed and Heat-Treated For Longevity. SET INCLUDES: S756T Engine Timing Camshaft Sprocket (1 EA), S619 Engine Timing Crankshaft Sprocket (1 EA), C385 Engine Timing Chain (1 EA).

Product Features:

Utilizes the latest in design and technology to offer complete chain sets
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$33.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$20.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$16.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$15.99

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$14.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$13.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

Top-Rated Engine Parts Brands For Your 1994 Buick Skylark

Shop for the best-rated brands offering Engine Parts and other products for your 1994 Buick Skylarks. Below you’ll find some of our best rated Engine Parts from FELPRO, National, and Dorman, and more. Engine Parts from these brands that fit a 1994 Skylark start at just $5.49 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1994 Buick Skylark Engine Parts

When it comes to maintaining or upgrading your 1994 Buick Skylark, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 1994 Buick Skylark. With over 3 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $15.99, with an average price of just $28.99. Plus, with over 12 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $15.99

(4)

Engine Valve Cover Grommet Set

“Good quality. Grommets go around the screws.”

from $37.99

(4)

Engine Oil Pan Gasket Set – PermaDry molded rubber

“Quality”

from $32.99

(4)

Engine Crankshaft Seal Kit

“It was easy to install since i was puting in a clutch already!”

Popular National 1994 Buick Skylark Engine Parts

National auto parts is one of the highest quality Engine Part brands in the market. Any 1994 Buick Skylark owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1994 Skylark, Advance Auto Parts carries a full inventory of 3 National Engine Parts. Plus you will be keeping your Buick in peak condition while saving money because prices on these National Engine Parts range from $9.79 to $29.99, plus, with more than 25 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $29.99

(5)

Multi-Purpose Seal

“This is the correct fit rear extension housing seal for my 1969 FMX transmission in my 1969 Mercury Cougar. Finding the seal with the bushing is a plu”

from $18.79

(5)

Engine Harmonic Balancer Repair Sleeve

“Simple device. Durable. Easy to install”

from $9.79

(15)

Multi-Purpose Seal

“fit”

FAQs for 1994 Buick Skylark Engine Parts

Which Engine Parts are best-sellers for 1994 Buick Skylarks?

Out of 98 Engine Parts that fit 1994 Buick Skylarks, the following parts are the top sellers:

Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (18481430) – $10.99
Harmonic Balancer Assembly (15950125) – $89.99
Multi-Purpose Seal (3271684) – $9.79

What’s the price range for 1994 Buick Skylark Engine Parts?

Engine Part prices for the 1994 Buick Skylark start at $0.65 and go up to $1,912.99 for the most premium parts.

What’s the average price of a Engine Part for a 1994 Buick Skylark?

The average price for Engine Parts for the 1994 Buick Skylark is $69.62. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Buick Skylark model years?

Yes, we currently carry Engine Parts for 35 model years of Buick Skylarks between 1954 and 1998. Engine Parts are bought most frequently for the following model years: 1998, 1997, 1996, 1995, 1993, 1992, 1991, 1990, and 1989.

What are the cheapest Engine Parts for my 1994 Buick Skylark?

The cheapest 1994 Buick Skylark Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (15680110) – $0.65
Engine Oil Dipstick Tube O-Ring (50251306) – $0.99
Stock Replacement Oil Pump Shaft Guide (3716619) – $1.99
Pipe Plug C.S. Hex 1/8-27 Npt X 5/16 In. (Sold by each) (22140247) – $2.99
Pipe Plug-Square Head-3/8 In. MNPT (10120513) – $2.99

What are the top-rated Engine Parts that fit the 1994 Buick Skylark?

Out of 697 reviews by customers, our 1994 Buick Skylark Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1994 Buick Skylark and their top-rated products:

Valve Cover and Cylinder Heads
- Engine Push Rod (19690703) – $6.79
- Engine Valve Cover Grommet Set (15780437) – $15.99
- Engine Valve Lifter (15680009) – $19.99
Engine Gaskets and Seals
- Engine Push Rod (19690703) – $6.79
- Engine Valve Cover Grommet Set (15780437) – $15.99
- Engine Valve Lifter (15680009) – $19.99

What types of Engine Parts do you sell for my 1994 Buick Skylark?

As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 1994 Buick Skylark:

Can I get help with 1994 Buick Skylark Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Engine Parts and more.

What is your return policy for Buick Skylark Engine Parts?

Advance Auto Parts keeps returns simple. For new Buick Skylark Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1994 Buick Skylark Engine Parts

Melling – Stock Replacement OE Type High Volume Oil Pump (Part No.M134HV)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5356)

National – Engine Harmonic Balancer Kit (Part No.5000)

PowerBond – Harmonic Balancer (Part No.PB1486N)

Carquest Premium – Engine Oil Level Sensor (Part No.SBA3659)

Sealed Power – Engine Exhaust Valve (Part No.V-1904)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S620T)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72856)

Carquest Premium – Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10066)

Melling – Stock Replacement Oil Pump Screen (Part No.20-IS1)

Felpro – Engine Oil Pan Gasket Set – Blue Stripe cork-rubber (Part No.OS 12992 C)

Anchor – Torque Strut Motor Mount: Front, 1 Piece (Part No.2814)

Sealed Power – Engine Push Rod (Part No.RP-3174)

Felpro – Engine Valve Cover Grommet Set (Part No.ES 71044)

National – Multi-Purpose Seal (Part No.5273)

Sealed Power – Engine Connecting Rod Bearing Set (Part No.8-3045A)

Cardone – Remanufactured Engine Control Computer (Part No.77-8707)

National – Multi-Purpose Seal (Part No.320691)

Sealed Power – Engine Piston Ring Set (Part No.E-384X)

Cardone – Remanufactured Powertrain Control Module (Part No.77-3978)

Carquest – Air Charge Temperature Sensor Connector (Part No.28423)

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

Felpro – TIMING COVER GASKET SET WITH REPAIR SLEEVE (Part No.TCS 45976)

National – Shaft Repair Sleeve (Part No.99174)

Sealed Power – Engine Valve Lifter (Part No.HT-2236)

Felpro – Engine Oil Filler Cap Seal (Part No.73193)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S369)

Spectre – Dipstick; Oil Pan (Part No.4255)

Anchor – Engine Mount: Front Right, Right, 1 Piece (Part No.2803)

Anchor – Torque Strut Motor Mount: Front, 1 Piece (Part No.2782)

Sealed Power – Engine Push Rod (Part No.RP-3331)

Felpro – Engine Valve Cover Grommet Set (Part No.ES 71044)

Sealed Power – Engine Valve Lifter (Part No.HT-2270)

Sealed Power – Engine Exhaust Valve (Part No.V-4497)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-291)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 74019)

Dorman – Pipe Plug C.S. Hex 1/8-27 Npt X 5/16 In. (Sold by each) (Part No.090-046)

Spartan – Engine Cylinder Head; Chev 3.1 93-95 Cyl Head (Part No.2CD4)

Sealed Power – Engine Valve Lifter (Part No.HT-2236)

Sealed Power – Engine Valve Spring (Part No.VS-1642)

Sealed Power – Engine Camshaft Bearing Set (Part No.1492M)

GM Genuine Parts – Black Multi-Purpose Pigtail (Part No.PT2782)

Carquest Premium – Multi-Use Connector (Part No.ABA3459)

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA1357)

MAHLE Original – Engine Valve Cover Gasket Set (Part No.VS50173A)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber (Part No.OS 30668 R)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50442 R)

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 45828)

Felpro – TIMING COVER GASKET SET WITH REPAIR SLEEVE (Part No.TCS 45976)

Felpro – Engine Oil Filler Cap Seal (Part No.73193)

National – Multi-Purpose Seal (Part No.4307V)

National – Shaft Repair Sleeve (Part No.99298)

GM Genuine Parts – Valve Cover Gasket (Part No.10154775)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40591)

Victor Reinz – Molded Rubber Valve Cover Gasket Set: Direct Fit, 2 Pieces (Part No.15-10630-01)

Victor Reinz – Engine Timing Cover Gasket (Part No.71-14069-00)

MAHLE Original – Engine Timing Cover Gasket (Part No.T31259)

National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)

National – Engine Harmonic Balancer Kit (Part No.5000)

Cloyes Gear – Engine Timing Chain (Part No.C385)

MAHLE Original – Engine Timing Cover Seal (Part No.65022)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5294)

Cloyes Gear – Engine Timing Set (Part No.C-3036)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S734T)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S756T)

National – Engine Crankshaft Seal (Part No.320259)

Cloyes Gear – Engine Timing Damper (Part No.9-5336)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S619)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S747)