1994 Buick Roadmaster Steering and Chassis Parts

Below you will find various in-demand Buick Steering and Chassis Parts, components and accessories for your 1994 Roadmaster. Advance Auto Parts has popular Roadmaster parts like Ball Joints, Gear Boxes, Tie Rods and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Roadmaster model years including 1955, 1956, 1957, 1958, 1991, 1992, 1993, 1995, 1996 and more. Select a category of 1994 Buick Roadmaster Steering and Chassis Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1994 Buick Roadmaster Steering and Chassis Parts Categories

Power Steering Coolers

Steering Gear Box

Suspension Ball Joint Kits

Center Tie Rod Ends

Steering Drag Link Adjusting Sleeves

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Alignment Caster Adjustment Spacers

Tie Rod End Sleeves

Center and Drag Links

Power Steering Pressure Hoses

Power Steering Pressure Switches

Power Steering Pump Caps

Power Steering Pump Kits

Sway Bar Link Bushing Kits

Power Steering Return Hoses

Pinion Bearings

Sway Bar Bushings

Pitman Shaft Seal Kits

Steering Gear Input Shaft Seals

Power Steering Pump Seal Kits

Chassis Wiring Harness Connectors

Pump Shaft Seals

Power Steering Pressure Control Solenoid Connector

Essential Steering and Chassis Parts for 1994 Buick Roadmasters

from

$14.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$27.99

Carquest Premium tie rods are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium tie rods utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all tie rods to reduce rust. Each part number in the Carquest Premium tie rod line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$995.99

Product Features:

All critical components are built to strict manufacturing specifications, which eliminates critical component failure that causes noise and leaks
Exterior surfaces are finished with corrosion and rust resistant coatings to ensure an extended service life
All components are 100% new and functionally tested to meet or exceed OE specifications for extended reliability
Recirculating balls are machined for smooth operation which guarantees correct steering feel and performance

from

$45.99

When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$90.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$134.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Forged steel
Heat treated components
Improves steering response

from

$149.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$37.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Coated for corrosion resistance
Engineered to meet or exceed OE Performance
Wrench flats on housing and stud provide easy installation and alignment adjustment.
Polished Stud ball provides low socket torque.
Stud design is optimized to provide ideal stud swing and strength for each application.

from

$12.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$7.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Quick Connect coupler
Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
Simplifies transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Quik-Connect Coupler – Fits most 5/16″ trans-lines with 1/2″-20 thread
Compatible with OEM cooler systems
Made of brass
Quality construction

from

$55.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Power Steering Pressure Switch monitors the hydraulic pressure in the power steering system, enhancing safety and performance by alerting the driver to potential issues such as low fluid levels or system malfunctions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$8.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$64.99

Backed by superior materials and rigorous testing, MOOG ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates

from

$149.99

Improves steering response
Reduces wander
Reduces vibration
Reduces tire wear

from

$384.99

Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.

from

$34.99

Power Steering Kit
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$59.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$6.49

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$14.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$35.49

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$21.79

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$27.49

Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot provides extended temperature range and better wear resistance
Test-proven stud material helps prevent premature stud failure
Provides premium gauge steel construction for strength and durability
Performance tested to ensure durability

from

$21.99

Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Innovative features like molded bushings that hold coated washers in place and easy-thread 1-in. barrel lock nut make it easier to install than traditional sway bar links
PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
RIGHT TECHNOLOGY FOR THE REPAIR — Featuring problem-solving innovations for long life, MOOG designs the right sway bar link technology for your vehicle
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$163.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$12.49

Can bring vehicles back to factory specification
Shims and bushings provide precise camber, caster and toe adjustments
Can solve excessive tire wear and steering issues
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$23.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$15.79

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

Upgrade your 1994 Buick Roadmaster with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1994 Buick Roadmaster, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Roadmaster functioning at its best. At Advance Auto Parts, we offer a wide selection of 92 Steering and Chassis Parts for the 1994 Buick Roadmaster, designed to meet your needs without breaking the bank. From Ball Joint replacements to Gear Boxes upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1994 Buick Roadmaster at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $7.99 to $911.99, with an average price of $79.89. Our 92 Steering and Chassis Parts in stock come from 13 trusted brands, so you’re sure to find the right part for your 1994 Buick Roadmaster without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1994 Buick Roadmaster, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Moog, National, Driveworks, and more. Moog Steering and Chassis Parts start at just $13.99 and boast an impressive 4.5 stars average rating from customers. National and Driveworks also bring quality to the table, with Steering and Chassis Parts available starting at $11.49, and at an average 4.3 stars rating. With 1,641 customer reviews and counting, our 1994 Buick Roadmaster Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1994 Buick Roadmaster is always ready to roll. We’re committed to providing you with everything you need to keep your Roadmaster in top shape, all in one place. Start shopping confidently below for your 1994 Buick Roadmaster!

Best-Selling Ball Joints for 1994 Buick Roadmasters

Enhance the driving experience in your Buick with 19 quality Ball Joint components, starting at $27.49.

show more show less

from

$52.99

DESIGN CHANGE – New and improved follower ball joint design to extend product life and simplify installation
PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates

from

$64.99

PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates

from

$27.49

Meets or exceeds OE performance specifications
Premium Polychloroprene boot provides extended temperature range and better wear resistance
Test-proven stud material helps prevent premature stud failure
Provides premium gauge steel construction for strength and durability
Performance tested to ensure durability

from

$163.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$37.49

Meets or exceeds OE performance specifications
Premium Polychloroprene boot provides extended temperature range and better wear resistance
Test-proven stud material helps prevent premature stud failure
Provides premium gauge steel construction for strength and durability
Performance tested to ensure durability

from

$151.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$186.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$44.99

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Knurling improves retention between the control arm/knuckle and ball joint housing

from

$215.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$179.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$33.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$179.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$179.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$259.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$259.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$209.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$209.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$67.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$34.49

Carquest Premium ball joints are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium ball joints utilize the same ball joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all ball joints to reduce rust. Each part number in the Carquest Premium ball joint line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included for easier installation (where applicable)

Most Popular 1994 Buick Roadmaster Gear Boxes

Customize your Buick with 6 Gear Boxes products like Steering Gear Box, all priced under $911.99.

show more show less

from

$236.99

The steering gear box is the heart of the vehicle’s steering system. It guides the wheel’s movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. Each unit features 100 percent new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100 percent hydraulically tested to ensure perfect fit and function.

Product Features:

100 percent hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
100 percent new O-rings and lip seals ensure leak-free, long-lasting performance.
All critical components are tested to ensure product reliability.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$271.99

Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.

from

$911.99

Premium-quality new power steering gear designed for dependability and reliability throughout the service life of the vehicle.

Product Features:

All critical components are built to strict manufacturing specifications, which eliminates critical component failure that causes noise and leaks
Exterior surfaces are finished with corrosion and rust resistant coatings to ensure an extended service life
All components are 100% new and functionally tested to meet or exceed OE specifications for extended reliability
Recirculating balls are machined for smooth operation which guarantees correct steering feel and performance

from

$867.99

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function.

Product Features:

PWR Power Steering Gear Boxes are 100% NEW and Engineered In North America
All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
PWR does not consolidate turn ratios, ensuring OE quality replacement performance
Includes: NEW housings, internal components, ball bearings, shafts, bushings, and are precision machined and matched for optimum performance and duarability
Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Input and Output Shaft Spilne Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
Supplied with a New Output Shaft Nut and all required Installation Seals and Washers

from

$611.99

New Power Steering Gears are engineered to OE specifications. Each unit is inspected, adjusted and hydraulically tested. All units are carefully packaged to insure safe arrival at your door.

from

$213.99

Premium-quality remanufactured power steering gear designed for dependability and reliability throughout the service life of the vehicle.

Product Features:

Gear housings are inspected and bead-blasted which eliminates rust and corrosion
Sector shafts are liquid penetrant tested to ensure structural integrity and prevent future leakage
Sealing surfaces are inspected, reconditioned and polished which helps to prevent premature failure of the unit
All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life of the power steering gear
Recirculating balls are replaced with new matched sets to provide correct steering feel and performance
All assembled units are 100% end-of-line tested for leaks and performance to ensure that the product has the same functionality as intended by the OE

Top Picks for 1994 Buick Roadmaster Tie Rods

Upgrade Buick Roadmasters with top-quality Tie Rods parts, including 8 OEM and aftermarket selections for your 1994 model.

show more show less

from

$45.99

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$28.99

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$49.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$44.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$18.99

Driveworks Brand tie rod adjusting sleeves are high-quality, cost-effective parts. Replace tie rod adjusting sleeve to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts promote improved steering response.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability

from

$27.99

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$55.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$55.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

In-Demand Power Steering Parts for 1994 Buick Roadmasters

Select from 23 premium Power Steering Parts parts for your 1994 Buick Roadmaster, with prices ranging from $7.99 to $196.99.

show more show less

from

$14.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$13.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$50.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$47.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$105.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$32.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$7.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Quick Connect coupler
Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
Simplifies transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Quik-Connect Coupler – Fits most 5/16″ trans-lines with 1/2″-20 thread
Compatible with OEM cooler systems
Made of brass
Quality construction

from

$25.99

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$35.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$23.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$34.99

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$59.99

from

$196.99

NEW P/S PUMP

from

$145.99

PS PMP

from

$91.99

Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to captures metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Leak free, high impact, environmentally resistant polymer casing to ensure longer life and better resistance to high underhood temperatures

from

$55.99

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$53.99

Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models

from

$40.99

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models

from

$36.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$19.29

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$14.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$13.99

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models

Most Sold 1994 Buick Roadmaster Sway Bars

Explore our best-selling Buick parts for the 1994 Roadmaster among 19 OEM and aftermarket options starting from $8.29.

show more show less

from

$13.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features

from

$18.79

The Grade 8 coated bolt makes the link extremely durable
Features an enhanced solid hex spacer of strong, lightweight, anodized T-6 aluminum to resist corrosion
Heavy-duty bushings made from new urethane material are extremely durable, absorbing road shocks while resisting oil, heat and ozone
Bushings feature new patent-pending stress reliefs to improve durability and sensitivity to installation torque
Black phosphate barrel nut and washers provide corrosion protection.

from

$11.49

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
Wrench flats at the base of the stud allow for the use of sockets for easy installation

from

$11.49

Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
Wrench flats at the base of the stud allow for the use of sockets for easy installation

from

$29.99

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$27.99

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$21.79

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$8.29

Strut Rod Bushing

from

$10.49

Strut Rod Bushing Kit

from

$11.99

Strut Rod Bushing Kit

from

$35.99

Rubber or Thermoplastic material
No Squeak
Complete with bolt ,washers, and nut
Improves body roll

from

$28.49

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$25.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$38.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$18.49

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$17.49

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$17.49

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$16.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$12.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Top-Rated Steering and Chassis Parts Brands For Your 1994 Buick Roadmaster

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1994 Buick Roadmasters. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, National, and Driveworks, and more. Steering and Chassis Parts from these brands that fit a 1994 Roadmaster start at just $11.49 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 1994 Buick Roadmaster Steering and Chassis Parts

When it comes to maintaining or upgrading your 1994 Buick Roadmaster, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 1994 Buick Roadmaster. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $13.99, with an average price of just $34.99. Plus, with over 64 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $13.99

(29)

Suspension Stabilizer Bar Link Kit

“Quality product at a very affordable price and easy to install”

from $52.99

(25)

Suspension Ball Joint

“I was apprehensive to buy these initially, due to the reviews about the provided bolts. If you look at Moog’s website for installation instructions an”

from $37.99

(10)

Steering Tie Rod End Adjusting Sleeve

“Good”

Popular National 1994 Buick Roadmaster Steering and Chassis Parts

National auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1994 Buick Roadmaster owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1994 Roadmaster, Advance Auto Parts carries a full inventory of 2 National Steering and Chassis Parts. Plus you will be keeping your Buick in peak condition while saving money because prices on these National Steering and Chassis Parts range from $14.99 to $34.99, plus, with more than 4 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from $34.99

(1)

Multi-Purpose Seal

“Amazing”

from $14.99

(3)

Bearing Race

“Used on my diesel truck”

FAQs for 1994 Buick Roadmaster Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1994 Buick Roadmasters?

Out of 92 Steering and Chassis Parts that fit 1994 Buick Roadmasters, the following parts are the top sellers:

New Power Steering Filter (10417593) – $32.99
Steering Tie Rod End Adjusting Sleeve (20515467) – $37.99
Power Steering Oil Cooler (19230069) – $28.49

What’s the price range for 1994 Buick Roadmaster Steering and Chassis Parts?

Steering and Chassis Part prices for the 1994 Buick Roadmaster start at $7.99 and go up to $911.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1994 Buick Roadmaster?

The average price for Steering and Chassis Parts for the 1994 Buick Roadmaster is $79.89. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Buick Roadmaster model years?

Yes, we currently carry Steering and Chassis Parts for 13 model years of Buick Roadmasters between 1950 and 1996. Steering and Chassis Parts are bought most frequently for the following model years: 1996, 1995, 1993, 1992, 1991, 1958, 1957, 1956, and 1955.

What are the cheapest Steering and Chassis Parts for my 1994 Buick Roadmaster?

The cheapest 1994 Buick Roadmaster Steering and Chassis Parts we carry in stock are:

Quick Connect Coupler (15230008) – $7.99
Strut Rod Bushing (10640955) – $8.29
Strut Rod Bushing Kit (10577164) – $10.49
Sway Bar Link Kit (15510375) – $11.49
Suspension Stabilizer Bar Link Kit (15510341) – $11.49

What are the top-rated Steering and Chassis Parts that fit the 1994 Buick Roadmaster?

Out of 1,641 reviews by customers, our 1994 Buick Roadmaster Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1994 Buick Roadmaster and their top-rated products:

Tie Rods
- Tie Rod End (15530161) – $28.99
- Steering Tie Rod End (20514830) – $49.99
- Steering Tie Rod End (15530150) – $45.99
Steering Hardware
- Tie Rod End (15530161) – $28.99
- Steering Tie Rod End (20514830) – $49.99
- Steering Tie Rod End (15530150) – $45.99
Sway Bars
- Tie Rod End (15530161) – $28.99
- Steering Tie Rod End (20514830) – $49.99
- Steering Tie Rod End (15530150) – $45.99

What types of Steering and Chassis Parts do you sell for my 1994 Buick Roadmaster?

As of 3/1/26, these are some of the most in-demand types of Steering and Chassis Parts for a 1994 Buick Roadmaster:

Can I get help with 1994 Buick Roadmaster Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Steering and Chassis Parts and more.

What is your return policy for Buick Roadmaster Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Buick Roadmaster Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1994 Buick Roadmaster Steering and Chassis Parts

Powercraft – Pump Seal Kit (Part No.8631)

Carquest Premium – Tie Rod End Adjusting Sleeve (Part No.370-65029)

Carquest Premium – New Power Steering Gear – Hydraulic (Part No.503-0142CQN)

Driveworks – Steering Tie Rod End (Part No.DW-ES2019RLT)

Carquest Premium – Multi-Use Connector (Part No.PTA2913)

Rare Parts – Center Link (Part No.RP25926)

Rare Parts – Tie Rod End (Part No.RP25261)

MOOG – Steering Tie Rod End Adjusting Sleeve (Part No.ES2004S)

Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.533-424)

Imperial – Quick Connect Coupler (Part No.240250)

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1025)

National – Power Steering Pump Shaft Seal (Part No.8059S)

MOOG – Suspension Ball Joint (Part No.K6145T)

Rare Parts – Idler Arm (Part No.RP20383)

Lares – Remanufactured Power Steering Pump (Part No.2104)

National – Multi-Purpose Seal (Part No.PSK-1)

Carquest Premium – Power Steering Return Hose Assembly, 16mm Male "O" Ring x 3/8" I.D. Hose (Part No.36094)

Dorman – Help – Power Steering Cap (Part No.82581)

National – Bearing Race (Part No.M802011)

Cardone – Power Steering Filter (Part No.20-P038F)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K5248)

Driveworks – Ball Joint (Part No.DW-K5208)

MOOG – Suspension Stabilizer Bar Link Kit (Part No.K700538)

MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK620158)

Imperial – Power Steering Oil Cooler (Part No.241009)

MOOG – Alignment Caster / Camber Shim (Part No.K100188)

Carquest Premium – Multi-Use Connector (Part No.PTA1093)

Powercraft – Steering Gear Input Shaft Seal Kit (Part No.8525)

MOOG – Suspension Ball Joint (Part No.K5208)

MOOG – Suspension Ball Joint (Part No.K6145T)

Driveworks – Ball Joint (Part No.DW-K5208)

MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK620158)

Driveworks – Ball Joint (Part No.DW-K6145T)

MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK620159)

MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK620168)

Carquest Premium – Ball Joint (Part No.410-65006)

Dorman – Suspension Control Arm (Part No.520-117)

Dorman – Suspension Control Arm (Part No.520-118)

Rare Parts – Ball Joint (Part No.RP10146)

Dorman – Suspension Control Arm (Part No.520-120)

Dorman – Suspension Control Arm (Part No.520-119)

Rare Parts – Control Arm W/ Ball Joint (Part No.RP11348)

Rare Parts – Control Arm W/ Ball Joint (Part No.RP11349)

Rare Parts – Control Arm W/ Ball Joint (Part No.RP11531)

Rare Parts – Control Arm W/ Ball Joint (Part No.RP11532)

Rare Parts – Ball Joint (Part No.RP10791)

Carquest Premium – Upper Ball Joint (Part No.400-65007)

Cardone – Remanufactured Steering Gear (Part No.27-7560)

Lares – Remanufactured Power Steering Gear Box (Part No.1353)

Carquest Premium – New Power Steering Gear – Hydraulic (Part No.503-0140CQN)

PWR – New Power Steering Gear (Part No.61-5146)

Lares – New Power Steering Gear Box (Part No.11353)

Carquest Premium – Remanufactured Power Steering Gear – Hydraulic (Part No.27-7560CQ)

Driveworks – Steering Tie Rod End (Part No.DW-ES2019RLT)

Driveworks – Tie Rod End (Part No.DW-ES2020RLT)

MOOG – Steering Tie Rod End (Part No.ES2019RLT)

MOOG – Steering Tie Rod End (Part No.ES2020RLT)

Driveworks – Steering Tie Rod End Adjusting Sleeve (Part No.DW-ES2004S)

Carquest Premium – Tie Rod End Adjusting Sleeve (Part No.370-65029)

Rare Parts – Tie Rod End (Part No.RP25551)

Rare Parts – Tie Rod End (Part No.RP26133)

National – Bearing Race (Part No.M802011)

Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Cardone – Remanufactured Power Steering Pump (Part No.20-864)

Cardone – New Power Steering Filter (Part No.20-0038F)

Imperial – Power Steering Oil Cooler (Part No.241009)

Imperial – Quick Connect Coupler (Part No.240250)

Dorman – Help – GM Power Steering Cap (Part No.82605)

Cardone – Power Steering Filter (Part No.20-P038F)

Carquest Premium – Multi-Use Connector (Part No.PTA1093)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Carquest Premium – Power Steering Return Hose Assembly, 16mm Male "O" Ring x 3/8" I.D. Hose (Part No.36094)

Atlantic Automotive Eng – NEW P/S PUMP (Part No.6309N)

Lares – PS PMP (Part No.12296)

Carquest Premium – Power Steering Filter (Part No.20-0038FCQN)

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1025)

Carquest Premium – Power Steering Filter (Part No.20-0012FCQN)