1993 Toyota 4Runner Differentials

Name: Yoke For Toyota V6 Rear With 29 Spline Pinion, With Pinion Seal & Pinion Nut
Brand: Yukon Gear
SKU: 41212
Price: 144.99 USD

Find your specific 1993 Toyota 4Runner original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1993 Toyota 4Runner Differentials

from

$144.99

Product Features:

Conversion kit
Fits Toyota V6 rear with 29 spline pinion
Includes yoke , pinion seal, and pinion nut

from

$669.99

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:

Fits Toyota 7.5″
Made from 9310 steel for added strength
Replaces the spiders in a standard carrier case

from

$101.99

7.5″ V6 & 4cyl side shim kit (incl. 7 shims).

Product Features:

Carrier shim kit
Fits Toyota 7.5″

from

$61.99

Differential Crush S

from

$8.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$7.99

8″ standard Open pinion gear Thrust washer.

Product Features:

Pinion gear thrust washer
Fits Toyota 8″ with 4 cylinder engine

from

$11.99

Toyota 8″ & V6 gasket.

Product Features:

Dropout gasket
Fits Toyota 8″ and V6

from

$49.99

7.5″ Toyota Spartan locker cross pin.

Product Features:

USA Standard Gear heavy-duty short cross pin shaft
Fits Toyota 7.5″
Works with Spartan Locker or standard open spider gears

from

$36.99

Product Features:

Bulkhead fitting kit
Includes bulkhead fitting, outer fitting and o-ring

from

$6.79

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug & help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$81.95

Application-Specific Engineering Design to ensure the correct fit, function and high performance of the wheel bearing. BCA supplies premium replacement bearings that meet or exceed the OE specifications. Premium Quality Materials are used for forged steel rings, seals, precision cages, rolling elements and premium grease, to ensure that our customers receive a robust, durable product. Seals are customized for each BCA hub based on application-specific materials and design requirements to minimize the chance of contamination and maximize bearing life. Precision Cage on BCA bearings are designed to keep the rolling elements of the bearing spaced correctly. The cages undergo design verification and production validation testing to ensure high quality. Pre-Lubrication of all BCA wheel bearings with premium grease for your convenience. This is a major advantage so you do not have to worry about grease or seal application.

Product Features:

For wheel bearings, BCA utilizes Forged Steel in the inner and outer rings that meets our stringent steel quality specifications to optimize bearing life.
For taper bearings, BCA utilizes Case Carburized Steel for heavy duty shock loads and longer life.

from

$34.99

Product Features:

MINI-INSTALL TOYOTA 8″

from

$38.99

Product Features:

Side adjuster
Fits Toyota V6 and Landcruiser reverse rotation front

from

$782.99

Differential

from

$78.99

Product Features:

Seal housing for Toyota 8″ and V6
Includes o-rings

from

$19.99

Pinion seal for 7.5″, 8″, V6, and T100 and Tacoma with lockers.Yukon Mighty seal.

Product Features:

Pinion seal
Fits Toyota 7.5″, 8″ with 4 cylinder engine, V6, Landcruiser and Tacoma/T100 with factory locking differential

from

$23.99

Toyota 29spl V6 and clamshell front, outer oil slinger.

Product Features:

Outer slinger
Fits Toyota 8″ clamshell front

from

$794.99

V6 standard Open case, bare.

Product Features:

Standard open carrier case
Does not include spider gears
Fits Toyota V6

from

$32.99

Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:

HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions

from

$7.99

DiffRingGearBolt

from

$39.99

8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:

Pinion depth shim kit for Toyota 7.5″, 8″ and V6

from

$37.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$16.99

Toyota 8″ & V6 pinion nut washer.

Product Features:

Pinion nut for Toyota 8″ and V6

from

$404.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits 1979-1985 Toyota Pickup and 4Runner and 1975-1990 Landcruiser
4.11 ratio
29 spline pinion
Includes conversion yoke, seal, and pinion nut

from

$11.99

8″ standard Open side gear Thrust washer.

Product Features:

Side gear thrust washer
Fits Toyota 8″ with 4 cylinder engine

from

$304.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits standard rotation Toyota 7.5″ front with 4 cylinder engine
Uses Koyo bearings and races
Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, pinion shim kit, ring gear bolts, pinion nut, crush sleeve , oil baffles and slingers , thread locker, marking compound with brush, and silicone.

from

$529.99

8″ Reverse high-pinion Toyota Drop Out (fits 8″ Housing) .

Product Features:

Fits Toyota Landcruiser reverse rotation front

from

$299.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear. This kit fits applications with a 27 spline pinion.

Product Features:

Fits Toyota V6 rear
Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.

Popular 1993 Toyota 4Runner Differentials Categories

Differential Oil

Differential Open Unit and Components

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Pinion Flanges

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Rebuild Kits

Differential Pinion Seals

Differential Ring and Pinions

Differential Cases

Differential End Yokes

Differential Lock Assemblies

Differential Air System Seal Housings

Differential Spools

Differential Carrier Bearing Adjusters

Automatic Transmission Differential Cover Gaskets

Front Differential Cover Gaskets

Differential Pinion Bearing Kits

Differential Seals

Differential Drain Plugs

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Carrier Bearing Shims

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Oil Deflectors

Differential Pinion Gear Washers

Differential Ring and Pinion Kits

Limited Slip Differential Assemblies

Maybe you’re in the middle of a full rebuild of that 1993 Toyota 4Runner. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 201 different Differentials in our inventory ranging from $5.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1993 Toyota 4Runner running smoothly.

Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1993 Toyota 4Runner. Yukon Gear, National, and Idemitsu are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1993 Toyota 4Runner, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 13 reviews in this category, some of the top rated parts include Toyota 7.5 Pinion Nut with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1993 Toyota 4Runner rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1993 Toyota 4Runner Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1993 Toyota 4Runner demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your 4Runner the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Automatic Transmission Differential Cover Gaskets categories, plus more. For a 1993 Toyota 4Runner, our most popular Felpro Differentials include:

from $8.79

(1)

Differential Carrier Gasket

Automatic Transmission Differential Cover Gaskets

Top 1993 Toyota 4Runner Differentials from National

National products are another trusted brand when it comes to Differentials for your 1993 Toyota 4Runner. Popular National parts include:

from $89.99

(2)

Bearings

Front Differential Pinion Bearings

from $37.49

(1)

Shaft Repair Sleeve

Differential Pinion Pilot Bearings

from $51.99

(1)

Bearings

Front Differential Pinion Bearings

FAQs for 1993 Toyota 4Runner Differentials

What are the most purchased Differentials for the 1993 Toyota 4Runner?

Out of 201 Differentials for the 1993 Toyota 4Runner, the most popular in our inventory are:

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $11.79

(2)

Type TLS Automatic Transmission Fluid – 1 qt

Differential Oil

from $6.79

This product is not rated

Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack

Differential Drain Plugs

What are the top-rated 1993 Toyota 4Runner Differentials?

Top-rated Differentials for your 1993 Toyota 4Runner based on customer reviews/ratings are:

from $9.99

(1)

Toyota 7.5 Pinion Nut

“Matches OEM nut from 1995 Toyota base model 2wd pickup with 7.5″ rear diff. The casting was not as good as original, it had ripples on the mounting ”

1993 Toyota 4Runner Differentials

More 1993 Toyota 4Runner Differentials

Essential 1993 Toyota 4Runner Differentials

Yukon Gear – Yoke For Toyota V6 Rear With 29 Spline Pinion, With Pinion Seal & Pinion Nut (Part No.41212)

USA Standard Gear – Spartan Locker For Toyota 7.5" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17014)

Yukon Gear – Carrier Shim Kit For Toyota 7.5" (Part No.55038)

Yukon Gear – Differential Crush S (Part No.33573)

Felpro – Differential Carrier Gasket (Part No.RDS 55431)

Yukon Gear – 8" Standard Open Pinion Gear Thrust Washer (Part No.33392)

Yukon Gear – Toyota 8" & V6 Gasket (Part No.23028)

USA Standard Gear – 7.5" Toyota Spartan Locker Cross Pin (Part No.17030)

Yukon Gear – Zip Locker Bulkhead Fitting Kit (Part No.34000)

Needa Parts – Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack (Part No.090-030)

NTN – BCA Wheel Bearing (Part No.K8000279217NTN)

Motive Gear – Differential Gear Install Kit (Part No.TOYIK)

Yukon Gear – V6 & L/C Reverse Drop Out Side Adjusters (Part No.33365)

Yukon Gear – Differential (Part No.26051)

Yukon Gear – Seal Housing For Toyota Zip Locker (Part No.34011)

Yukon Gear – Pinion Seal For Toyota 7.5", 8", V6 & T100 (Part No.30005)

Yukon Gear – Oil Slinger For Toyota 29 Spline Rear Pinion & Clamshell Front (Part No.33026)

Yukon Gear – Standard Open Carrier Case, Toyota V6 (Part No.20110)

Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon (Part No.773732)

Yukon Gear – DiffRingGearBolt (Part No.33580)

Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

National – Shaft Repair Sleeve (Part No.99157)

Yukon Gear – Toyota 8" & V6 Pinion Nut Washer (Part No.33168)

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota 8" In A 4.11 Ratio (Part No.24644)

Yukon Gear – 8" Standard Open Side Gear Thrust Washer (Part No.33395)

USA Standard Gear – Master Overhaul Kit for Toyota 7.5" IFS Differential, Four-cylinder Only (Part No.37106)

Yukon Gear – 8" Reverse High-Pinion Toyota Drop Out (Part No.32298)

Yukon Gear – Pinion Install Kit For Toyota V6 Rear Differential (Part No.13092)

Popular 1993 Toyota 4Runner Differentials Categories