1993 Porsche 968 Brake Parts
Find Your Specific 1993 Porsche 968 Brake Parts
Below you will find various in-demand Porsche Brake Parts, components and accessories for your 1993 968. Advance Auto Parts has popular 968 parts like Brake Hardware Parts, Brake Pads and Shoes, Brake Rotors and Drums and more. You’ll also find aftermarket and OEM Brake Parts for other 968 model years including
1992,
1994,
1995 and more. Select a category of 1993 Porsche 968 Brake Parts below and start saving instantly.
Popular 1993 Porsche 968 Brake Parts Categories
Essential Brake Parts for 1993 Porsche 968s
ATE – Pneumatic Brake Booster (Part No.N400030336ATE)
from
$383.44
ATE supplies brake boosters in single or tandem versions and in all desired sizes and is one of the world’s leading OE suppliers of brake control and brake assist systems. The tie rod version, which is available for all designs, provides further weight reduction and additional optimized elongation characteristics. Front-bolt concepts on a tie-rod basis facilitate installation. Electric and mechanical brake assist systems, sensors for OHB, ACC, ESC, etc., as well as measures designed to optimize crash behavior complete the product portfolio. Brake assist systems are an important aid in emergency braking situations in which a driver needs to respond to an emergency situation, but does not apply the brakes with sufficient pressure. The brake assist recognizes the brake application speed to detect this type of panic situation, and activates the brake booster or the EBS hydraulic unit. Maximum braking is thus achieved although the force on the brake pedal is low – the shorter braking distance can even be life-saving.
Product Features:
See More
Product Features:
- Original equipment (OE) quality
- Wide range of single and tandem Brake Boosters
- Unique tie-rod design meaning lighter and thinner parts for more efficient performance
- Most units are made of steel, but lightweight aluminium versions are also available.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5713)
from
$136.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Sebro – Electronic Brake Pad Sensor (Part No.N103030326SEB)
from
$16.62
The Sebro Electronic Brake Pad Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Pex – Brake Pad Wear Sensor (Part No.N103030326PEX)
from
$23.51
PEX electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads. The engineers at PEX make certain that all materials, parts and tolerances meet the same high standards as the OE brake sensors they supply to brake manufacturers and auto makers worldwide.
Product Features:
See More
Product Features:
- Exact Replacement with OE Fittings and Connectors
- Resistant to Extreme High Heat
- Highly Durable
- Supplied with all required hardware
- PEX is an OE supplier to Brake and Vehicle Manufacturers
Pex – Disc Brake Pad Electronic Wear Sensor (Part No.WK222)
from
$19.39
As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.
Product Features:
See More
Product Features:
- PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
- Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
- All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
- Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
- As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.
Zimmermann – Coat-Z Sport Brake Disc (Rotor) (Part No.N1000948208ZXC)
from
$197.71
The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- Better wet braking performance by permanent expulsion of brake dust and water
- Sporty look
- Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
- Noticeable improvement in the braking power of your car
- Prevention of brake fade
- Countersinking of holes doubles up as wear indicator
- 1:1 exchange of original disc possible
- No additional adaption necessary
- Not subject to registration: general ABE certification supplied with disc
Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000948208ZIC)
from
$154.80
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- No formation of rust at the hub and herewith improved visual appearance
- Immediate functional capability without removal of the coating before mounting
- Excellent deceleration action and no distortion of friction ring at high temperatures
- Substantial weight saving and therefore less unsprung mass
- Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
- Hot spots prevented by optimized design of ventilation channels
- 1:1 exchange of original disc possible
- Not subject to registration: general ABE certification supplied with disc
- No conversion required for brake tuning
Aftermarket – Parking Brake Shoe S (Part No.N50022515492AFT)
from
$28.38
Parking Brake Shoe S
APA/URO Parts – Brake Pad Shim (Part No.N1020343980APA)
from
$20.02
Brake Pad Shim
Original Equipment – Original Equipment Brake Pad Shim (Part No.N102029038OEA)
from
$11.06
The Original Equipment Brake Pad Shim is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part. Original Equipment Brake Pad Shims are platform specific rubber to metal composite material designed to solve noise and vibration problems. OE brake pad shims are cut specially to suit specific vehicle models and fit perfectly with genuine pads and those made by other manufacturers.
Product Features:
See More
Product Features:
- Platform Specific Design
- Combats Brake Squeal
- OE-Style Composite Core Shim
- Effective Thermal Barrier
APA/URO Parts – APA/URO Brake Pad Shim (Part No.N1020324462APA)
from
$18.73
Platform specific rubber to metal composite material designed to solve noise and vibration problems. To effectively combat brake squeal, APA/URO utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. APA/URO brake pad shims are cut specially to suit specific vehicle models and fit perfectly with genuine pads and those made by other manufacturers.
Product Features:
See More
Product Features:
- Platform Specific Design
- Combats Brake Squeal
- OE-Style Composite Core Shim
- Effective Thermal Barrier
Upgrade your 1993 Porsche 968 with Top-Quality Brake Parts
When it comes to maintaining or upgrading your 1993 Porsche 968, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Porsche or enhancing its overall performance, Brake Parts are key to keeping your 968 functioning at its best. At Advance Auto Parts, we offer a wide selection of 14 Brake Parts for the 1993 Porsche 968, designed to meet your needs without breaking the bank.
From
Brake Hardware Part
replacements to
Brake Pads and Shoes
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1993 Porsche 968 at great prices.
Our Brake Parts inventory for this model
ranges from just $1.50 to $383.44, with
an average price of $86.32.
Our 14 Brake Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 1993 Porsche 968 without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1993 Porsche 968 is always ready to roll. We’re committed to providing you with everything you need to keep your 968 in top shape, all in one place.
Start shopping confidently below for your 1993 Porsche 968!
Best-Selling Brake Hardware Parts for 1993 Porsche 968s
Enhance the driving experience in your Porsche with 1 quality Brake Hardware Part components, starting at $1.50.
Original Equipment – Brake Disc Set Screw (Part No.N1004649921OEA)
from
$1.50
Brake Disc Set Screw
Most Popular 1993 Porsche 968 Brake Pads and Shoes
Customize your Porsche with 7 Brake Pads and Shoes products
like Rear Brake Pads and Shoes,
Brake Wear Sensors, and
Brake Pad Shims, all
priced under $45.69.
Autopart International Inc – Brake Pad Set (Part No.N10102965099API)
from
$45.69
Brake Pad Set
Pex – Brake Pad Wear Sensor (Part No.N103030326PEX)
from
$23.51
PEX electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads. The engineers at PEX make certain that all materials, parts and tolerances meet the same high standards as the OE brake sensors they supply to brake manufacturers and auto makers worldwide.
Product Features:
See More
Product Features:
- Exact Replacement with OE Fittings and Connectors
- Resistant to Extreme High Heat
- Highly Durable
- Supplied with all required hardware
- PEX is an OE supplier to Brake and Vehicle Manufacturers
APA/URO Parts – Brake Pad Shim (Part No.N1020343980APA)
from
$20.02
Brake Pad Shim
Pex – Disc Brake Pad Electronic Wear Sensor (Part No.WK222)
from
$19.39
As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.
Product Features:
See More
Product Features:
- PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
- Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
- All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
- Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
- As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.
APA/URO Parts – APA/URO Brake Pad Shim (Part No.N1020324462APA)
from
$18.73
Platform specific rubber to metal composite material designed to solve noise and vibration problems. To effectively combat brake squeal, APA/URO utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. APA/URO brake pad shims are cut specially to suit specific vehicle models and fit perfectly with genuine pads and those made by other manufacturers.
Product Features:
See More
Product Features:
- Platform Specific Design
- Combats Brake Squeal
- OE-Style Composite Core Shim
- Effective Thermal Barrier
Sebro – Electronic Brake Pad Sensor (Part No.N103030326SEB)
from
$16.62
The Sebro Electronic Brake Pad Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Original Equipment – Original Equipment Brake Pad Shim (Part No.N102029038OEA)
from
$11.06
The Original Equipment Brake Pad Shim is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part. Original Equipment Brake Pad Shims are platform specific rubber to metal composite material designed to solve noise and vibration problems. OE brake pad shims are cut specially to suit specific vehicle models and fit perfectly with genuine pads and those made by other manufacturers.
Product Features:
See More
Product Features:
- Platform Specific Design
- Combats Brake Squeal
- OE-Style Composite Core Shim
- Effective Thermal Barrier
Top Picks for 1993 Porsche 968 Brake Rotors and Drums
Upgrade Porsche 968s with top-quality Brake Rotors and Drums parts, including 3 OEM and aftermarket selections for your 1993 model.
Zimmermann – Coat-Z Sport Brake Disc (Rotor) (Part No.N1000948208ZXC)
from
$197.71
The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- Better wet braking performance by permanent expulsion of brake dust and water
- Sporty look
- Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
- Noticeable improvement in the braking power of your car
- Prevention of brake fade
- Countersinking of holes doubles up as wear indicator
- 1:1 exchange of original disc possible
- No additional adaption necessary
- Not subject to registration: general ABE certification supplied with disc
Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000948208ZIC)
from
$154.80
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- No formation of rust at the hub and herewith improved visual appearance
- Immediate functional capability without removal of the coating before mounting
- Excellent deceleration action and no distortion of friction ring at high temperatures
- Substantial weight saving and therefore less unsprung mass
- Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
- Hot spots prevented by optimized design of ventilation channels
- 1:1 exchange of original disc possible
- Not subject to registration: general ABE certification supplied with disc
- No conversion required for brake tuning
Sebro – Brake Disc (Part No.N10002515334SEB)
from
$150.59
Brake Disc
In-Demand Brake Boosters for 1993 Porsche 968s
Select from 2 premium Brake Boosters parts for your 1993 Porsche 968, with prices ranging from $136.99 to $383.44.
ATE – Pneumatic Brake Booster (Part No.N400030336ATE)
from
$383.44
ATE supplies brake boosters in single or tandem versions and in all desired sizes and is one of the world’s leading OE suppliers of brake control and brake assist systems. The tie rod version, which is available for all designs, provides further weight reduction and additional optimized elongation characteristics. Front-bolt concepts on a tie-rod basis facilitate installation. Electric and mechanical brake assist systems, sensors for OHB, ACC, ESC, etc., as well as measures designed to optimize crash behavior complete the product portfolio. Brake assist systems are an important aid in emergency braking situations in which a driver needs to respond to an emergency situation, but does not apply the brakes with sufficient pressure. The brake assist recognizes the brake application speed to detect this type of panic situation, and activates the brake booster or the EBS hydraulic unit. Maximum braking is thus achieved although the force on the brake pedal is low – the shorter braking distance can even be life-saving.
Product Features:
See More
Product Features:
- Original equipment (OE) quality
- Wide range of single and tandem Brake Boosters
- Unique tie-rod design meaning lighter and thinner parts for more efficient performance
- Most units are made of steel, but lightweight aluminium versions are also available.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5713)
from
$136.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Most Sold 1993 Porsche 968 Parking Brakes
Explore our best-selling Porsche parts for the 1993 968 among 1 OEM and aftermarket options starting from $28.38.
Aftermarket – Parking Brake Shoe S (Part No.N50022515492AFT)
from
$28.38
Parking Brake Shoe S
FAQs for 1993 Porsche 968 Brake Parts
Which Brake Parts are best-sellers for 1993 Porsche 968s?
Out of 14 Brake Parts that fit 1993 Porsche 968s, the following parts are the top sellers:
- Brake Disc Set Screw (12488452) – $1.50
- Brake Disc (12512115) – $150.59
- Vacuum Brake Booster: Without Master Cylinder (18690444) – $136.99
What’s the price range for 1993 Porsche 968 Brake Parts?
Brake Part prices for the 1993 Porsche 968 start at $1.50 and go up to $383.44 for the most premium parts.
What’s the average price of a Brake Part for a 1993 Porsche 968?
The average price for Brake Parts for the 1993 Porsche 968 is $86.32. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Brake Parts for other Porsche 968 model years?
What are the cheapest Brake Parts for my 1993 Porsche 968?
The cheapest 1993 Porsche 968 Brake Parts we carry in stock are:
- Brake Disc Set Screw (12488452) – $1.50
- Original Equipment Brake Pad Shim (10760529) – $11.06
- Electronic Brake Pad Sensor (11405825) – $16.62
- APA/URO Brake Pad Shim (11193237) – $18.73
- Disc Brake Pad Electronic Wear Sensor (10857875) – $19.39
What types of Brake Parts do you sell for my 1993 Porsche 968?
As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1993 Porsche 968:
Can I get help with 1993 Porsche 968 Brake Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Porsche Brake Parts and more.
What is your return policy for Porsche 968 Brake Parts?
Advance Auto Parts keeps returns simple. For new Porsche 968 Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
