1993 Porsche 911 Engine Parts

Essential Engine Parts for 1993 Porsche 911s

Corteco – Valve Stem Seal (Part No.A807083738CFW)

Valve Stem Seal

from

$1.59
Valve Stem Seal

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.ABA3461)

ABS Wheel Speed Sensor Connector

from

$12.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

CRP – Valve Cover Washer (Part No.A316222355)

Valve Cover Washer

from

$1.55
Valve Cover Washer

Glyco – Glyco Rod Bearing Set (Part No.A203063362GLY)

Glyco Rod Bearing Set

from

$132.05
Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:
  • Original Equipment Quality
  • Excellent wear resistance
  • Low propensity to seize
  • Reduction in Friction
See More

Elring – Exhaust Manifold Gas (Part No.A8111940750ELR)

Exhaust Manifold Gas

from

$23.32
Exhaust Manifold Gas

Original Equipment – Rocker Arm (Part No.A40401663957OEA)

Rocker Arm

from

$193.58
Rocker Arm

Cohline – Oil Line (Part No.A605022584COH)

Oil Line

from

$93.52
Oil Line

Iwis – Timing Chain (Part No.A510063364IWI)

Timing Chain

from

$137.16
Timing Chain

Glyco – Wrist Pin Bushing (Part No.A206023165GLY)

Wrist Pin Bushing

from

$20.65
Clevite is the number one name in replacement engine bearings – delivering on the track and in machine shops around the country. With track proven performance in engines with thousands of horsepower, it is obvious Clevite has the strength to handle any light vehicle application.As more and more OE manufacturers shift to aluminum bearings in OE engines, Clevite has introduced a new line of engine bearings designed to be the highest quality replacement bearings in the industry. Clevite Bimetal engine bearings carry on the tradition and reputation that Clevite has built throughout the course of time.Clevite Bimetal engine bearings feature a 100% lead free aluminum silicon bi-metal material, which includes 60% more silicon than the leading competitor’s bi-metal material for better conditioning of journal surfaces. These Bimetal bearings also offer greater wear resistance than the leading competitor’s bi-metal material, as well as greater seizure resistance. Clevite Bimetal bearings feature 100% bored ID’s for precision and surface characteristics and where appropriate – straight shell main bearings utilizing an “umbrella” groove that allows for superior oil control and improved pressure.Clevite® Bimetal engine bearings are of aluminum, tin, silicon Bimetal type of material and construction. These offer the engine rebuilder an Oe type of bearing for engines going into light duty applications. They are only recommended for applications where all engine components have been reconditioned to engine manufacturers original specifications.Bimetal engine bearings are not recommended for Heavy Duty service where heavy demands are placed on the engine or High Performance applications where Clevite TriMetal is still the ultimate performance choice.

Product Features:
  • Original Equipment Manufacturer
  • Maximum Load-Bearing Capacity
  • Fatigue-Resistant, adaptable
  • Resistant to Wear and Corrosion
  • Advanced Surface Coatings
See More

Febi – Valve Adjust Nut (Part No.A413023841FEB)

Valve Adjust Nut

from

$1.24
Valve Adjust Nut

TRW – TRW Intake Valve (Part No.A4060450500TRW)

TRW Intake Valve

from

$160.79
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:
  • OE Quality
  • Optimized for strength
  • Heat and corrosion resistant
  • Chromium plated or nitrided
  • Stem optimized to resist wear
See More

Original Equipment – Valve Adjust Screw (Part No.A412028277OEA)

Valve Adjust Screw

from

$35.88
Valve Adjust Screw

Original Equipment – Valve Spring (Part No.A4150263760OEA)

Valve Spring

from

$9.61
Valve Spring

Original Equipment – Timing Guide Rail (Part No.A504028017OEA)

Timing Guide Rail

from

$6.06
Timing Guide Rail

Original Equipment – Oil Return Tube Circlip (Part No.A604763372OEA)

Oil Return Tube Circlip

from

$1.55
Oil Return Tube Circlip

Original Equipment – Oil Return Tube Kit (Part No.A604425232OEA)

Oil Return Tube Kit

from

$62.59
Oil Return Tube Kit

TRW – Valve Keeper (Part No.A407022393TRW)

Valve Keeper

from

$2.37
Valve Keeper

Cohline – Coolant Bleed Screw (Part No.G2032669392COH)

Coolant Bleed Screw

from

$4.59
Coolant Bleed Screw

Elring – Elring Valve Cover Gasket (Part No.A8030374782ELR)

Elring Valve Cover Gasket

from

$59.31
Elring valve cover gaskets are engineered to meet the specific requirements of the installation site. Manufactured from high-quality materials, the gaskets are designed to provide excellent performance and reliability. Elring valve cover gaskets feature specially designed sealing lips. The overall layout of these lips is of particular importance when it comes to ensuring a high-quality seal and long service life. The same applies to the selection of premium-quality raw materials.

Product Features:
  • High-quality design and engineering for perfect performance
  • Premium materials and high-precision curing processes for perfect shore hardness and superior reliability
  • Majority of Elring valve cover gaskets sold as kits for improved convenience and efficient installation
See More

Original Equipment – Camshaft O-Ring (Part No.A4003669739OEA)

Camshaft O-Ring

from

$20.29
Camshaft O-Ring

Beck/Arnley – Rear Crankshaft Seal (Part No.052-3218)

Rear Crankshaft Seal

from

$45.49
Engineered from premium materials. Able to endure the most demanding conditions. Precision manufacturing for exact fit and enhanced sealing capabilities
See More

Original Equipment – Camshaft Gear Spacer (Part No.A4290149822OEA)

Camshaft Gear Spacer

from

$28.22
Camshaft Gear Spacer

Original Equipment – Rocker Shaft Nut (Part No.A4330706587OEA)

Rocker Shaft Nut

from

$7.80
Rocker Shaft Nut

Bruss – Oil Return Tube Seal (Part No.A604536449BRU)

Oil Return Tube Seal

from

$2.67
Oil Return Tube Seal

Original Equipment – Oil Return Tube Seal (Part No.A6045437690OEA)

Oil Return Tube Seal

from

$7.21
Oil Return Tube Seal

Original Equipment – Oil Return Tube (Part No.A604632666OEA)

Oil Return Tube

from

$23.52
Oil Return Tube

Upgrade your 1993 Porsche 911 with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1993 Porsche 911, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Porsche or enhancing its overall performance, Engine Parts are key to keeping your 911 functioning at its best. At Advance Auto Parts, we offer a wide selection of 68 Engine Parts for the 1993 Porsche 911, designed to meet your needs without breaking the bank. From Valve Cover and Cylinder Head replacements to Engine Timing Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1993 Porsche 911 at great prices. Our Engine Parts inventory for this model ranges from just $1.24 to $976.99, with an average price of $61.88. Our 68 Engine Parts in stock come from 23 trusted brands, so you’re sure to find the right part for your 1993 Porsche 911 without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1993 Porsche 911 is always ready to roll. We’re committed to providing you with everything you need to keep your 911 in top shape, all in one place. Start shopping confidently below for your 1993 Porsche 911!

Best-Selling Valve Cover and Cylinder Heads for 1993 Porsche 911s

Enhance the driving experience in your Porsche with 16 quality Valve Cover and Cylinder Head components, starting at $1.24.

Original Equipment – Rocker Arm (Part No.A40401663957OEA)

Rocker Arm

from

$193.58
Rocker Arm

TRW – TRW Intake Valve (Part No.A4060450500TRW)

TRW Intake Valve

from

$160.79
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:
  • OE Quality
  • Optimized for strength
  • Heat and corrosion resistant
  • Chromium plated or nitrided
  • Stem optimized to resist wear
See More

Aftermarket – Engine Case Stud (Part No.A30421229647OEA)

Engine Case Stud

from

$70.97
The Original Equipment Engine Case Stud is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE Quality
  • Same design as the original equipment part
  • Powder coated for corrosion resistance
See More

TRW – TRW Exhaust Valve (Part No.A405039590TRW)

TRW Exhaust Valve

from

$37.21
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:
  • OE Quality
  • Optimized for strength
  • Heat and corrosion resistant
  • Chromium plated or nitrided
  • Stem optimized to resist wear
See More

Original Equipment – Valve Adjust Screw (Part No.A412028277OEA)

Valve Adjust Screw

from

$35.88
Valve Adjust Screw

Original Equipment – Valve Spring Set (Part No.A4151395260OEA)

Valve Spring Set

from

$19.71
Valve Spring Set

Canyon Engine – Manganese Bronze Valve Guide (Part No.A306053955CEC)

Manganese Bronze Valve Guide

from

$11.32
The Canyon Engine Valve Guide is manufactured using Manganese Bronze and is an exact duplication of the original equipment part. The valve guides are complete with the snap ring installed (Mercedes) and the correct color code indicating the oversize diameter.

Product Features:
  • OE Quality
  • Same design as the original equipment part
  • Manufactured from Manganese Bronze material
  • Complete with snap ring (Mercedes)
See More

Original Equipment – Rocker Shaft Nut (Part No.A4330706587OEA)

Rocker Shaft Nut

from

$7.80
Rocker Shaft Nut

Original Equipment – Rocker Shaft End Plu (Part No.A4200670295OEA)

Rocker Shaft End Plu

from

$7.57
Rocker Shaft End Plu

Aftermarket – Air Intake Hose Clam (Part No.B2008939817AFT)

Air Intake Hose Clam

from

$6.56
Air Intake Hose Clam

TRW – Valve Keeper (Part No.A407022393TRW)

Valve Keeper

from

$2.37
Valve Keeper

Original Equipment – Valve Cover Washer (Part No.A316230929OEA)

Valve Cover Washer

from

$2.29
Valve Cover Washer

Original Equipment – Valve Adjust Shim (Part No.A402083336OEA)

Valve Adjust Shim

from

$2.27
Valve Adjust Shim

Laengerer & Reich – Valve Cover Washer (Part No.A316222355ELR)

Valve Cover Washer

from

$1.55
Valve Cover Washer

CRP – Valve Cover Washer (Part No.A316222355)

Valve Cover Washer

from

$1.55
Valve Cover Washer

Febi – Valve Adjust Nut (Part No.A413023841FEB)

Valve Adjust Nut

from

$1.24
Valve Adjust Nut

Most Popular 1993 Porsche 911 Engine Timing Parts

Customize your Porsche with 9 Engine Timing Parts products like Timing Cam Gears, Timing Chain Guides, and Timing Chains, all priced under $137.16.

Iwis – Timing Chain (Part No.A510063364IWI)

Timing Chain

from

$137.16
Timing Chain

Sebro – Camshaft Gear (Part No.A51301449948SEB)

Camshaft Gear

from

$105.73
Camshaft Gear

Sebro – Intermediate Gear, Intermediate Shaft Gear (Part No.A512025363SEB)

Intermediate Gear, Intermediate Shaft Gear

from

$92.49
Intermediate Gear, Intermediate Shaft Gear

Original Equipment – Timing Guide Rail (Part No.A5040128362OEA)

Timing Guide Rail

from

$74.58
Timing Guide Rail

Original Equipment – Timing Guide Rail (Part No.A5040128359OEA)

Timing Guide Rail

from

$70.75
Timing Guide Rail

Original Equipment – Timing Guide Rail (Part No.A5040128361OEA)

Timing Guide Rail

from

$67.75
Timing Guide Rail

Original Equipment – Timing Cover Washer (Part No.A5068668458OEA)

Timing Cover Washer

from

$8.11
Timing Cover Washer

Original Equipment – Timing Chain Case Bu (Part No.A52041096152OEA)

Timing Chain Case Bu

from

$7.52
Timing Chain Case Bu

Cohline – Coolant Bleed Screw (Part No.G2032669392COH)

Coolant Bleed Screw

from

$4.59
Coolant Bleed Screw

Top Picks for 1993 Porsche 911 Camshafts

Upgrade Porsche 911s with top-quality Camshafts parts, including 4 OEM and aftermarket selections for your 1993 model.

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.ABA3461)

ABS Wheel Speed Sensor Connector

from

$12.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

National – Shaft Repair Sleeve (Part No.99114)

Shaft Repair Sleeve

from

$27.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Original Equipment – Camshaft Gear Spacer (Part No.A4290149822OEA)

Camshaft Gear Spacer

from

$28.22
Camshaft Gear Spacer

Aftermarket – Camshaft O-Ring (Part No.A400349846AFT)

Camshaft O-Ring

from

$6.97
Camshaft O-Ring

In-Demand Engine Gaskets and Seals for 1993 Porsche 911s

Select from 8 premium Engine Gaskets and Seals parts for your 1993 Porsche 911, with prices ranging from $2.45 to $97.87.

Original Equipment – Valve Cover Gasket Set (Part No.A802926999OEA)

Valve Cover Gasket Set

from

$97.87
WARNING: This item cannot be returned for a replacement or refund if opened! The Original Equipment valve cover gasket set is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • OE Quality
  • Improved reliability, durability, and engine performance
  • Reduced oil consumption
  • Embossment shapes designed to improve durability
See More

Beck/Arnley – Rear Crankshaft Seal (Part No.052-3218)

Rear Crankshaft Seal

from

$45.49
Engineered from premium materials. Able to endure the most demanding conditions. Precision manufacturing for exact fit and enhanced sealing capabilities
See More

Elring – Gasket Maker (Part No.3K2003330627ELR)

Gasket Maker

from

$39.22
Gasket Maker

Original Equipment – Valve Cover Gasket (Part No.A803023709OEA)

Valve Cover Gasket

from

$19.53
Valve Cover Gasket

Aftermarket – Valve Cover Gasket (Part No.A8030179448AFT)

Valve Cover Gasket

from

$12.48
Valve Cover Gasket

Original Equipment – Valve Cover Gasket (Part No.A803023710OEA)

Valve Cover Gasket

from

$5.44
Valve Cover Gasket

Elring – Elring Valve Stem Seal (Part No.A8070450502ELR)

Elring Valve Stem Seal

from

$4.46
All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:
  • Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
  • Various designs specifically adapted to the area of application ensure excellent functionality and performance
  • High-performance FPM guarantees optimum leak tightness
See More

Hebmuller – Valve Stem Seal, With Teflon (Part No.A807022962HEB)

Valve Stem Seal, With Teflon

from

$2.45
Valve Stem Seal, With Teflon

Most Sold 1993 Porsche 911 Engine Mounts

Explore our best-selling Porsche parts for the 1993 911 among 1 OEM and aftermarket options starting from $2.15.

Original Equipment – Timing Cover Mount N (Part No.A50783315217OEA)

Timing Cover Mount N

from

$2.15
Timing Cover Mount N

FAQs for 1993 Porsche 911 Engine Parts

Which Engine Parts are best-sellers for 1993 Porsche 911s?

Out of 68 Engine Parts that fit 1993 Porsche 911s, the following parts are the top sellers:

What’s the price range for 1993 Porsche 911 Engine Parts?

Engine Part prices for the 1993 Porsche 911 start at $1.24 and go up to $976.99 for the most premium parts.

What’s the average price of a Engine Part for a 1993 Porsche 911?

The average price for Engine Parts for the 1993 Porsche 911 is $61.88. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Porsche 911 model years?

Yes, we currently carry Engine Parts for 59 model years of Porsche 911s between 1965 and 2024. Engine Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Engine Parts for my 1993 Porsche 911?

The cheapest 1993 Porsche 911 Engine Parts we carry in stock are:

What types of Engine Parts do you sell for my 1993 Porsche 911?

Can I get help with 1993 Porsche 911 Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Porsche Engine Parts and more.

What is your return policy for Porsche 911 Engine Parts?

Advance Auto Parts keeps returns simple. For new Porsche 911 Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.