1993 Mitsubishi Expo Belts and Hoses

Essential Belts and Hoses for 1993 Mitsubishi Expos

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25251)

Vulco-Flex½ II Flexible Coolant Hose

from

$30.49
Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Coolant Hose (Part No.21610)

Premium Molded Coolant Hose

from

$19.79
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Mitsubishi – Mitsuboshi Balance Shaft Belt (Part No.A5002169609MBL)

Mitsuboshi Balance Shaft Belt

from

$37.09
The Mitsuboshi Balance Shaft Belt is made to meet or exceed tough OE performance specifications and is resistant to high temperatures, is oil resistant and provides low noise and reliable operation.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision molded teeth.
  • Resistant to abrasion and heat.
  • Durable long life performance.
See More

Mitsubishi – Mitsuboshi Balance Shaft Belt (Part No.A500229562MBL)

Mitsuboshi Balance Shaft Belt

from

$9.22
The Mitsuboshi Balance Shaft Belt is made to meet or exceed tough OE performance specifications and is resistant to high temperatures, is oil resistant and provides low noise and reliable operation.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision molded teeth.
  • Resistant to abrasion and heat.
  • Durable long life performance.
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/8 Inch Diameter, 6 1/4 Inch Length (Part No.87003)

Molded Heater Hose; EPDM Rubber, 3/8 Inch Diameter, 6 1/4 Inch Length

from

$8.29
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Gates – Premium Molded Heater Hose (Part No.18303)

Premium Molded Heater Hose

from

$22.79
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length (Part No.80401)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length

from

$18.29
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Dayco – Poly Rib Belt Serpentine Belt; 39 Long, 4 Rib Count (Part No.5040390)

Poly Rib Belt Serpentine Belt; 39 Long, 4 Rib Count

from

$33.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 37.01 Long, 4 Rib Count (Part No.5040370)

Poly Rib Belt Serpentine Belt; 37.01 Long, 4 Rib Count

from

$32.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 39 Long, 4 Rib Count (Part No.390K4)

Poly Rib Belt Serpentine Belt; 39 Long, 4 Rib Count

from

$17.49
This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
  • Meets OEM requirements
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia. (Part No.81051)

Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia.

from

$21.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.25" Diameter (Part No.D71467)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.25" Diameter

from

$28.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.31" Diameter (Part No.D71747)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.31" Diameter

from

$26.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Bottom Cog V-Belt; 25 Inch Long, Exact Fit Premium Quality (Part No.17250)

Bottom Cog V-Belt; 25 Inch Long, Exact Fit Premium Quality

from

$10.29
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  • Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  • Provides greater durability and flexibility – 35% stronger than all previous versions
  • Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100036474MBL)

Multi-Rib (Serpentine) Belt

from

$13.20
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Bando – Precision Engineered V-Belt (Part No.W100046414BAN)

Precision Engineered V-Belt

from

$8.89
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

Gates – Premium Molded Heater Hose (Part No.18030)

Premium Molded Heater Hose

from

$16.79
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (Part No.80402)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length

from

$23.49
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$87.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 20.4mm Width, 4 Grooves (Part No.89038)

Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 20.4mm Width, 4 Grooves

from

$33.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.50" Long, 1.31" Diameter (Part No.D71398)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.50" Long, 1.31" Diameter

from

$11.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Radiator Hose (Part No.G20001335671DAY)

Radiator Hose

from

$11.11
Radiator Hose

Upgrade your 1993 Mitsubishi Expo with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1993 Mitsubishi Expo, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mitsubishi or enhancing its overall performance, Belts and Hoses are key to keeping your Expo functioning at its best. At Advance Auto Parts, we offer a wide selection of 28 Belts and Hoses for the 1993 Mitsubishi Expo, designed to meet your needs without breaking the bank. From Pulley replacements to Heater Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1993 Mitsubishi Expo at great prices. Our Belts and Hoses inventory for this model ranges from just $5.65 to $87.99, with an average price of $25.12. Our 28 Belts and Hoses in stock come from 6 trusted brands, so you’re sure to find the right part for your 1993 Mitsubishi Expo without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1993 Mitsubishi Expo, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco Driveworks, and more. Dayco Belts and Hoses start at just $11.11 and boast an impressive 5 stars average rating from customers. With 162 customer reviews and counting, our 1993 Mitsubishi Expo Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1993 Mitsubishi Expo is always ready to roll. We’re committed to providing you with everything you need to keep your Expo in top shape, all in one place. Start shopping confidently below for your 1993 Mitsubishi Expo!

Best-Selling Pulleys for 1993 Mitsubishi Expos

Enhance the driving experience in your Mitsubishi with 1 quality Pulley components, starting at $33.99.

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 20.4mm Width, 4 Grooves (Part No.89038)

Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 20.4mm Width, 4 Grooves

from

$33.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Most Popular 1993 Mitsubishi Expo Heater Hoses

Customize your Mitsubishi with 1 Heater Hoses products like Heater Hoses, all priced under $18.29.

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length (Part No.80401)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length

from

$18.29
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Top Picks for 1993 Mitsubishi Expo Radiator Hoses

Upgrade Mitsubishi Expos with top-quality Radiator Hoses parts, including 2 OEM and aftermarket selections for your 1993 model.

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (Part No.80402)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length

from

$23.49
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Dayco – Radiator Hose (Part No.G20001335671DAY)

Radiator Hose

from

$11.11
Radiator Hose

In-Demand Serpentine and V Belts for 1993 Mitsubishi Expos

Select from 15 premium Serpentine and V Belts parts for your 1993 Mitsubishi Expo, with prices ranging from $5.65 to $37.09.

Dayco – Poly Rib Belt Serpentine Belt; 37.01 Long, 4 Rib Count (Part No.5040370)

Poly Rib Belt Serpentine Belt; 37.01 Long, 4 Rib Count

from

$32.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 37.01 Long, 4 Rib Count (Part No.370K4)

Poly Rib Belt Serpentine Belt; 37.01 Long, 4 Rib Count

from

$32.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Driveworks – Poly Rib Belt Serpentine Belt; 38.8 Long, 4 Rib Count (Part No.388K4)

Poly Rib Belt Serpentine Belt; 38.8 Long, 4 Rib Count

from

$14.79
This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
  • Meets OEM requirements
See More

Dayco – Premium Balance Shaft Belt, 20.48 Inch With 65 Round Tooth (Part No.95168)

Premium Balance Shaft Belt, 20.48 Inch With 65 Round Tooth

from

$25.99
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:
  • Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
  • Offers noise reduction and minimum dimensional tolerances for precise valve timing
  • Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
  • Belt tooth profile specifically designed to fit sprockets precisely and maintain timing effectiveness
See More

Dayco – Poly Rib Belt Serpentine Belt; 38.8 Long, 4 Rib Count (Part No.5040388)

Poly Rib Belt Serpentine Belt; 38.8 Long, 4 Rib Count

from

$25.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Mitsubishi – Mitsuboshi Balance Shaft Belt (Part No.A5002169609MBL)

Mitsuboshi Balance Shaft Belt

from

$37.09
The Mitsuboshi Balance Shaft Belt is made to meet or exceed tough OE performance specifications and is resistant to high temperatures, is oil resistant and provides low noise and reliable operation.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision molded teeth.
  • Resistant to abrasion and heat.
  • Durable long life performance.
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K040372)

Micro-V« Serpentine Drive Belt

from

$31.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100031470MBL)

Multi-Rib (Serpentine) Belt

from

$17.77
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Bando – Drive Belt (Part No.W100086339BAN)

Drive Belt

from

$16.89
Drive Belt

Bando – Multi Rib (Serpentine) Belt (Part No.W100027619BAN)

Multi Rib (Serpentine) Belt

from

$16.27
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100027619MBL)

Multi-Rib (Serpentine) Belt

from

$16.25
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100036474MBL)

Multi-Rib (Serpentine) Belt

from

$13.20
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Mitsubishi – Mitsuboshi Balance Shaft Belt (Part No.A500229562MBL)

Mitsuboshi Balance Shaft Belt

from

$9.22
The Mitsuboshi Balance Shaft Belt is made to meet or exceed tough OE performance specifications and is resistant to high temperatures, is oil resistant and provides low noise and reliable operation.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision molded teeth.
  • Resistant to abrasion and heat.
  • Durable long life performance.
See More

Bando – Precision Engineered V-Belt (Part No.W100046414BAN)

Precision Engineered V-Belt

from

$8.89
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

Bando – Precision Engineered V-Belt (Part No.W100046398BAN)

Precision Engineered V-Belt

from

$5.65
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

Most Sold 1993 Mitsubishi Expo Engine Cooling Hoses

Explore our best-selling Mitsubishi parts for the 1993 Expo among 7 OEM and aftermarket options starting from $16.69.

Dayco – Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia. (Part No.81051)

Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia.

from

$21.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.50" Long, 1.25" Diameter (Part No.C70687)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.50" Long, 1.25" Diameter

from

$23.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.31" Diameter (Part No.D71747)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.31" Diameter

from

$26.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 11 Inch Long, 1.25 Inch Inner Dia. (Part No.81031)

Flex Radiator Hoses; EPDM Rubber, 11 Inch Long, 1.25 Inch Inner Dia.

from

$27.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25251)

Vulco-Flex½ II Flexible Coolant Hose

from

$30.49
Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25253)

Vulco-Flex½ II Flexible Coolant Hose

from

$26.99
Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Radiator Hose (Part No.G20002439185DAY)

Radiator Hose

from

$16.69
Radiator Hose

Top-Rated Belts and Hoses Brands For Your 1993 Mitsubishi Expo

Shop for the best-rated brands offering Belts and Hoses and other products for your 1993 Mitsubishi Expos. Below you’ll find some of our best rated Belts and Hoses from Dayco and Driveworks, and more. Belts and Hoses from these brands that fit a 1993 Expo start at just $11.11 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 1993 Mitsubishi Expo Belts and Hoses

When it comes to maintaining or upgrading your 1993 Mitsubishi Expo, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1993 Mitsubishi Expo. With over 12 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.11, with an average price of just $24.08. Plus, with over 72 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia.
from
$21.99

(8)

Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia.

“Exact fit for ’97 Acura CL 2.2.”

Radiator Hose
from
$16.69
This product is not rated

Radiator Hose

“”

Radiator Hose
from
$11.11
This product is not rated

Radiator Hose

“”

Popular Driveworks 1993 Mitsubishi Expo Belts and Hoses

Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 1993 Mitsubishi Expo owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1993 Expo, Advance Auto Parts carries a full inventory of 2 Driveworks Belts and Hoses. Plus you will be keeping your Mitsubishi in peak condition while saving money because prices on these Driveworks Belts and Hoses range from $14.79 to $32.99, plus, with more than 9 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

Poly Rib Belt Serpentine Belt; 37.01 Long, 4 Rib Count
from
$32.99

(6)

Poly Rib Belt Serpentine Belt; 37.01 Long, 4 Rib Count

“Replaced old belts that were cracked and squeaking. These belts run quiet with no squeaks. Great value compared to prices of other belts.”

FAQs for 1993 Mitsubishi Expo Belts and Hoses

Which Belts and Hoses are best-sellers for 1993 Mitsubishi Expos?

Out of 28 Belts and Hoses that fit 1993 Mitsubishi Expos, the following parts are the top sellers:

What’s the price range for 1993 Mitsubishi Expo Belts and Hoses?

Belts and Hose prices for the 1993 Mitsubishi Expo start at $5.65 and go up to $87.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1993 Mitsubishi Expo?

The average price for Belts and Hoses for the 1993 Mitsubishi Expo is $25.12. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Mitsubishi Expo model years?

Yes, we currently carry Belts and Hoses for 3 model years of Mitsubishi Expos between 1992 and 1995. Belts and Hoses are bought most frequently for the following model years: 1995, 1994, and 1992.

What are the cheapest Belts and Hoses for my 1993 Mitsubishi Expo?

The cheapest 1993 Mitsubishi Expo Belts and Hoses we carry in stock are:

What are the top-rated Belts and Hoses that fit the 1993 Mitsubishi Expo?

Out of 162 reviews by customers, our 1993 Mitsubishi Expo Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1993 Mitsubishi Expo and their top-rated products:

What types of Belts and Hoses do you sell for my 1993 Mitsubishi Expo?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1993 Mitsubishi Expo:

Can I get help with 1993 Mitsubishi Expo Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mitsubishi Belts and Hoses and more.

What is your return policy for Mitsubishi Expo Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Mitsubishi Expo Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.