1993 Mazda RX-7 Oil and Lubricants

Essential Oil and Lubricants for 1993 Mazda RX-7s

Castrol – GTX 5W-20 Synthetic Blend Motor Oil, 1 Quart (Part No.15B743)

GTX 5W-20 Synthetic Blend Motor Oil, 1 Quart

from

$9.99
Castrol GTX 5W-20 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge

Product Features:
  • Premium-quality base oils and anti-wear additives that help extend engine life
  • Superior protection against engine sludge
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against high-temperature deposits
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • ILSAC GF-6
  • Meets Ford WSS-M2C945-B1
See More

FRAM – 10W-40 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 5 Quart (Part No.F670-5QT)

10W-40 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 5 Quart

from

$25.99
FRAM Conventional High Mileage 10W40 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W40 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Engine Cleaning and Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
  • Versatile Protection: Suitable for domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
  • Meets Stringent Standards: Formulated to meet or exceed all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF.
See More

FRAM – 5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control (Part No.F620-5QT)

5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control

from

$25.99
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

FRAM – 5 Qt Conventional 5W20 Engine Oil with Low-Speed Pre-Ignition Control (Part No.F610-5QT)

5 Qt Conventional 5W20 Engine Oil with Low-Speed Pre-Ignition Control

from

$25.99
FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W20 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

Castrol – GTX Ultraclean 5W-20 Synthetic Blend Motor Oil: 5 Quart (Part No.15A69C)

GTX Ultraclean 5W-20 Synthetic Blend Motor Oil: 5 Quart

from

$29.99
Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:
  • 1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against high-temperature deposits
  • Premium-quality base oils and anti-wear additives that help extend the life of your engine
  • Double-Action Formula: The synthetic blend engine oil features a double-action formula that effectively cleans away existing sludge and prevents new sludge formation.
  • Versatile Grades: Available in 0W-20, 5W-20, and 5W-30 grades, Castrol Ultraclean caters to various engine requirements and driving conditions.
  • Enhanced Engine Performance: By reducing sludge, varnish, and carbon build-up, this oil helps improve engine life, power, and fuel economy.
  • Synthetic Blend Composition: The GTX Ultraclean 5W-20 Synthetic Blend Motor Oil combines the benefits of synthetic technology with the reliability of a standard oil class.
See More

FRAM – 10W-30 High Mileage Full Synthetic Motor Oil: 1 Quart (Part No.F943)

10W-30 High Mileage Full Synthetic Motor Oil: 1 Quart

from

$7.99
FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

FRAM – Full Synthetic High Mileage 5W-30 Engine Oil: 5 Quart (Part No.F933-5QT)

Full Synthetic High Mileage 5W-30 Engine Oil: 5 Quart

from

$28.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

FRAM – 10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quarts (Part No.F940-5QT)

10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quarts

from

$27.99
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:
  • Outstanding thermal and oxidation stability
  • Excellent sludge and varnish protection
  • Faster oil flow at start-up
  • Volatility: Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 10W-30 is formulated with high-quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine.
  • Advanced LSPI Prevention: Contains additive technology specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
  • Enhanced Wear Protection: Offers increased wear protection, ensuring your engine components remain in optimal condition even under rigorous driving conditions.
  • Versatile Engine Compatibility: Suitable for a wide range of engines, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for various vehicle types.
See More

FRAM – 10W-40 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 1 Quart (Part No.F670)

10W-40 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 1 Quart

from

$6.49
FRAM Conventional High Mileage 10W40 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W40 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Sludge Cleanup: Formulated to help clean out sludge buildup, keeping engines running clean and with increased efficiency and power.
  • Versatile Compatibility: Suitable for gasoline and light-duty diesel engines, including turbocharged and supercharged engines.
  • Meets Industry Standards: Meets or exceeds all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF.
See More

FRAM – 10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart (Part No.464-32)

10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart

from

$7.29
10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart

Mobil Super – 10W-30 Synthetic Blend Motor Oil, 1 Quart (Part No.97025)

10W-30 Synthetic Blend Motor Oil, 1 Quart

from

$5.89
Mobil Super 10W-30 Synthetic Blend motor oil helps to extend your engine life and provide engine protection up to 5,000 miles for gasoline cars and light-duty trucks. Mobil Super has 15 percent extra cleaning additives to help prevent the formation of sludge and deposits when compared to Mobil conventional motor oil. Helps to get your engine cleaner, conserve viscosity for easier cold starting, and provide outstanding engine wear protection under a variety of operating conditions. Meets or exceeds the requirements of: API SN, SM, SL, API SN Plus.

Product Features:
  • Mobil Super Synthetic Blend motor oil 10W-30 works to protect your engine from sludge and deposits for up to 5,000 miles
  • Helps to keep your engine clean with 15 percent extra cleaning additives, preventing sludge and deposit formation
  • Works to provide outstanding engine wear protection under a variety of operating conditions
  • Enhanced formulation (vs. Mobil basic conventional oil) helps to conserves oil viscosity for easier cold starting
  • Recommended for gasoline cars and light-duty trucks
See More

Mobil Super – Super 10W-40 Synthetic Blend Motor Oil, 1 Quart (Part No.97026)

Super 10W-40 Synthetic Blend Motor Oil, 1 Quart

from

$6.99
Mobil Super 10W-40 synthetic blend motor oil helps to extend your engine life and provide engine protection up to 5,000 miles for gasoline cars and light-duty trucks. Mobil Super has 15 percent extra cleaning additives to help prevent the formation of sludge and deposits when compared to Mobil conventional motor oil. Helps to get your engine cleaner, conserve viscosity for easier cold starting, and provide outstanding engine wear protection under a variety of operating conditions. Meets or exceeds the requirements of: API SN, SM, SL, API SN Plus. (Or your vehicle’s OEM recommended oil change interval, whichever is longer. Some limitations apply, see Mobil Super Limited Warranty: https://www.mobil.com/en/lubricants/for-personal-vehicles/our-products/mobil-limited-warranties/mobil-super-limited-warranty)

Product Features:
  • Mobil Super synthetic blend motor oil 10W-40 works to protect your engine from sludge and deposits for up to 5,000 miles
  • Helps to keep your engine clean with 15 percent extra cleaning additives, preventing sludge and deposit formation
  • Works to provide outstanding engine wear protection under a variety of operating conditions
  • Enhanced formulation (vs. Mobil basic conventional oil ) helps to conserves oil viscosity for easier cold starting
  • Recommended for gasoline cars and light-duty trucks
  • Manufacturer Part Number: 124402
See More

FRAM – Full Synthetic High Mileage 5W-30 Motor Oil: 1 Quart (Part No.F933)

Full Synthetic High Mileage 5W-30 Motor Oil: 1 Quart

from

$7.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
  • Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
  • Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.
See More

FRAM – 10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart (Part No.F630)

10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart

from

$6.49
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-Speed Pre-Ignition Control
  • Chain Wear Protection
  • Piston Cleanliness
  • Turbo-Compatibility
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Versatile Compatibility: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI), as well as older carbureted or normally fuel-injected gasoline engine designs.
  • High-Quality Conventional Base Stocks: Utilizes a blend of high-quality conventional base stocks to ensure reliable engine protection across a broad range of operating conditions.
  • Meets Stringent Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories, ensuring it meets the latest industry requirements.
  • SAE oil weight of 10W-30, making it a dependable choice for various engine types.
See More

FRAM – 5W-30 Full Synthetic Motor Oil: 5 Quart (Part No.F930-5QT)

5W-30 Full Synthetic Motor Oil: 5 Quart

from

$27.99
FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
  • Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
  • Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
  • Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
  • Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.
See More

Mobil 1 – Extended Performance 10W-30 Full Synthetic Motor Oil, 1 Quart (Part No.14978)

Extended Performance 10W-30 Full Synthetic Motor Oil, 1 Quart

from

$12.99
If you trust your vehicle to be there for you, you need to be there for its engine, with Mobil 1 Extended Performance full-synthetic motor oil 10W-30. Our ultimate full-synthetic motor oil meets or exceeds the industry’s toughest standards to help you get the most from your engine for up to 20,000 miles between oil changes, guaranteed.(1) Mobil 1 Extended Performance utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of maximized engine power. This cutting-edge formula is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s No. 1 synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. ((1)Protects for up to 20,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2)Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending Feb 25, 2023)

Product Features:
  • Mobil 1 High Mileage full-synthetic motor oil 10W-30 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.(1)
  • Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
  • Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
  • Helps extend engine life by working to prevent damaging deposits and sludge buildup
  • Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
  • Manufacturer Part Number: 102990
  • Extended Engine Protection: Mobil 1 Extended Performance full-synthetic motor oil 10W-30 protects your engine for up to 20,000 miles or 1 year, ensuring long-lasting performance and reliability.
  • Versatile Compatibility: Recommended for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines in passenger cars, SUVs, light vans, and light trucks.
  • Industry-Leading Standards: Meets or exceeds the industry’s toughest standards, making it a trusted choice for car builders, experienced mechanics, and as the Official Motor Oil of NASCAR«.
  • Industry-Leading Standards: Meets or exceeds the industry’s toughest standards, making it a trusted choice for car builders, experienced mechanics, and as the Official Motor Oil of NASCAR®.
  • America’s No. 1 Synthetic Motor Oil Brand: Mobil 1 is the top synthetic motor oil brand at retail, trusted by consumers and professionals alike for its superior quality and performance.
See More

Castrol – GTX 10W-30 Conventional Motor Oil, 5 Quarts (Part No.15B7AA)

GTX 10W-30 Conventional Motor Oil, 5 Quarts

from

$29.99
Castrol GTX 10W-30 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against engine sludge
  • Premium quality base oils and anti-wear additives to help extend the life of your engine
  • Helps minimize oil consumption
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • Meets Ford WSS-M2C961-A1
See More

FRAM – High Milage Conventional 5W-30 Motor Oil – Helps Restore Seal Condition, 1 Quart (Part No.F660)

High Milage Conventional 5W-30 Motor Oil - Helps Restore Seal Condition, 1 Quart

from

$6.49
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
See More

Castrol – GTX 5W-20 Synthetic Blend Motor Oil, 5 Quarts (Part No.15A66C)

GTX 5W-20 Synthetic Blend Motor Oil, 5 Quarts

from

$9.99
Castrol GTX 5W-20 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge

Product Features:
  • Premium-quality base oils and anti-wear additives that help extend engine life
  • Superior protection against engine sludge
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against high-temperature deposits
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • Meets or exceeds the following specifications:
  • Meets Ford WSS-M2C945-B1
  • Meets Ford WSS-M2C960-A1
See More

FRAM – 5W-20 High Milage Conventional Motor Oil, Helps Restore Seal Condition, 1 Quart (Part No.F662)

5W-20 High Milage Conventional Motor Oil, Helps Restore Seal Condition, 1 Quart

from

$6.49
FRAM Conventional High Mileage 5W20 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W20 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W20 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Specially formulated for high mileage engines: FRAM High Mileage 5W20 1 QT is designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines, making it an ideal choice for vehicles with over 75,000 miles.
See More

FRAM – Conventional 10W40 Engine Oil with Low-Speed Pre-Ignition Control, 5 Quart (Part No.F640-5QT)

Conventional 10W40 Engine Oil with Low-Speed Pre-Ignition Control, 5 Quart

from

$25.99
FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robustï additive system to provide reliable engine protection across a broad range of operatingï conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engineï designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to preventï low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation andï shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets theï requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

Castrol – GTX 5W-30 Synthetic Blend Motor Oil, 5 Quart (Part No.15A66D)

GTX  5W-30 Synthetic Blend Motor Oil, 5 Quart

from

$29.99
Castrol GTX 5W-30 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge.

Product Features:
  • Premium-quality base oils and anti-wear additives that help extend engine life
  • Superior protection against engine sludge
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against high-temperature deposits
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • ILSAC GF-6
  • Meets Ford WSS-M2C946-B1
See More

FRAM – 5 Qt Engine Oil High Milage Conventional 5W30 Restores Seals to Reduce Oil Consumption (Part No.F660-5QT)

5 Qt Engine Oil High Milage Conventional 5W30 Restores Seals to Reduce Oil Consumption

from

$25.99
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
See More

Castrol – GTX 10W-30 Conventional Motor Oil, 1 Quart (Part No.15B400)

GTX 10W-30 Conventional Motor Oil, 1 Quart

from

$9.99
Castrol GTX 10W-30 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against engine sludge
  • Premium quality base oils and anti-wear additives to help extend the life of your engine
  • Helps minimize oil consumption
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • Meets Ford WSS-M2C960-A1
See More

FRAM – 5W-20 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 5 Quart (Part No.F662-5QT)

5W-20 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 5 Quart

from

$25.99
FRAM Conventional High Mileage 5W20 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W20 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W20 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
  • Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
  • Meets Stringent Standards: Meets or exceeds all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.
See More

FRAM – High Milage Conventional 10W-30 Motor Oil – Helps Restore Seal Condition, 1 Quart (Part No.F665)

High Milage Conventional 10W-30 Motor Oil - Helps Restore Seal Condition, 1 Quart

from

$6.49
FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Specially formulated for high mileage engines: FRAM High Mileage 10W30 Engine Oil is designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines, making it the perfect choice for vehicles with over 75,000 mi
See More

FRAM – Conventional 10W30 Engine Oil with Low-Speed Pre-Ignition Control – 5 Qt (Part No.F630-5QT)

Conventional 10W30 Engine Oil with Low-Speed Pre-Ignition Control - 5 Qt

from

$25.99
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.
See More

FRAM – 5W-20 Full Synthetic Motor Oil, Faster Oil Flow, 5 Quart (Part No.F920-5QT)

5W-20 Full Synthetic Motor Oil, Faster Oil Flow, 5 Quart

from

$27.99
FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
  • Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, thereby reducing the risk of pre-mature engine failure.
  • Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, making it a versatile choice for various engine types.
See More

Upgrade your 1993 Mazda RX-7 with Top-Quality Oil and Lubricants

When it comes to maintaining or upgrading your 1993 Mazda RX-7, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mazda or enhancing its overall performance, Oil and Lubricants are key to keeping your RX-7 functioning at its best. At Advance Auto Parts, we offer a wide selection of 22 Oil and Lubricants for the 1993 Mazda RX-7, designed to meet your needs without breaking the bank.

Affordable Prices and Wide Selection

Shopping for Oil and Lubricants for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Oil and Lubricants for your 1993 Mazda RX-7 at great prices. Our Oil and Lubricants inventory for this model ranges from just $5.89 to $29.99, with an average price of $17.61. Our 22 Oil and Lubricants in stock come from 3 trusted brands, so you’re sure to find the right part for your 1993 Mazda RX-7 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1993 Mazda RX-7, we stock popular OEM and aftermarket Oil and Lubricants from top names like Castrol Mobil Super, and more. Castrol Oil and Lubricants start at just $9.99 and boast an impressive 5 stars average rating from customers. With 1,203 customer reviews and counting, our 1993 Mazda RX-7 Oil and Lubricants have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Oil and Lubricant upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1993 Mazda RX-7 is always ready to roll. We’re committed to providing you with everything you need to keep your RX-7 in top shape, all in one place. Start shopping confidently below for your 1993 Mazda RX-7!

Best-Selling Motor Oil for 1993 Mazda RX-7s

Enhance the driving experience in your Mazda with 22 quality Motor Oil components, starting at $5.89.

Castrol – GTX 5W-30 Synthetic Blend Motor Oil, 5 Quart (Part No.15A66D)

GTX  5W-30 Synthetic Blend Motor Oil, 5 Quart

from

$29.99
Castrol GTX 5W-30 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge.

Product Features:
  • Premium-quality base oils and anti-wear additives that help extend engine life
  • Superior protection against engine sludge
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against high-temperature deposits
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • ILSAC GF-6
  • Meets Ford WSS-M2C946-B1
See More

Castrol – GTX 10W-30 Conventional Motor Oil, 5 Quarts (Part No.15B7AA)

GTX 10W-30 Conventional Motor Oil, 5 Quarts

from

$29.99
Castrol GTX 10W-30 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against engine sludge
  • Premium quality base oils and anti-wear additives to help extend the life of your engine
  • Helps minimize oil consumption
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • Meets Ford WSS-M2C961-A1
See More

Castrol – GTX 5W-20 Synthetic Blend Motor Oil, 5 Quarts (Part No.15A66C)

GTX 5W-20 Synthetic Blend Motor Oil, 5 Quarts

from

$9.99
Castrol GTX 5W-20 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge

Product Features:
  • Premium-quality base oils and anti-wear additives that help extend engine life
  • Superior protection against engine sludge
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against high-temperature deposits
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • Meets or exceeds the following specifications:
  • Meets Ford WSS-M2C945-B1
  • Meets Ford WSS-M2C960-A1
See More

Castrol – GTX 10W-30 Conventional Motor Oil, 1 Quart (Part No.15B400)

GTX 10W-30 Conventional Motor Oil, 1 Quart

from

$9.99
Castrol GTX 10W-30 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against engine sludge
  • Premium quality base oils and anti-wear additives to help extend the life of your engine
  • Helps minimize oil consumption
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • Meets Ford WSS-M2C960-A1
See More

Mobil Super – 10W-30 Synthetic Blend Motor Oil, 5 Quart (Part No.98008)

10W-30 Synthetic Blend Motor Oil, 5 Quart

from

$25.99
Mobil Super 10W-30 Synthetic Blend motor oil helps to extend your engine life and provide engine protection up to 5,000 miles for gasoline cars and light-duty trucks. Mobil Super has 15 percent extra cleaning additives to help prevent the formation of sludge and deposits when compared to Mobil conventional motor oil. Helps to get your engine cleaner, conserve viscosity for easier cold starting, and provide outstanding engine wear protection under a variety of operating conditions. Meets or exceeds the requirements of: API SN, SM, SL, API SN Plus.

Product Features:
  • Mobil Super Synthetic Blend motor oil 10W-30 works to protect your engine from sludge and deposits for up to 5,000 miles
  • Helps to keep your engine clean with 15 percent extra cleaning additives, preventing sludge and deposit formation
  • Works to provide outstanding engine wear protection under a variety of operating conditions
  • Enhanced formulation (vs. Mobil basic conventional oil) helps to conserves oil viscosity for easier cold starting
  • Recommended for gasoline cars and light-duty trucks
See More

Mobil Super – 5W-30 Synthetic Blend Motor Oil, 5 Quart (Part No.98010)

5W-30 Synthetic Blend Motor Oil, 5 Quart

from

$25.99
Mobil 1 advanced full synthetic motor oil 5W-30 helps to extend engine life for vehicles of all ages. Mobil 1 advanced synthetic motor oil is designed to deliver outstanding engine protection from the five factors that can damage engines over time and protect critical engine parts for up to 10,000 miles between oil changes. Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. This technologically advanced motor oil formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -30 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 advanced full synthetic motor oil meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy. Available in 1-qt. and 5-qt. bottles, Mobil 1 advanced full synthetic motor oil 5W-30 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern vehicles, including high-performance turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s leading synthetic motor oil brand at retail, recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. (Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ 52 weeks ending January 2, 2021)

Product Features:
  • Mobil 1 advanced full synthetic motor oil 5W-30 helps to protect your engine from the five factors that can damage engines over time
  • Helps to protect critical engine parts for up to 10,000 miles between oil changes, controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
  • Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
  • Helps extend engine life by working to prevent damaging deposits and sludge buildup
  • Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
See More

Mobil Super – 10W-30 Synthetic Blend Motor Oil, 1 Quart (Part No.97025)

10W-30 Synthetic Blend Motor Oil, 1 Quart

from

$5.89
Mobil Super 10W-30 Synthetic Blend motor oil helps to extend your engine life and provide engine protection up to 5,000 miles for gasoline cars and light-duty trucks. Mobil Super has 15 percent extra cleaning additives to help prevent the formation of sludge and deposits when compared to Mobil conventional motor oil. Helps to get your engine cleaner, conserve viscosity for easier cold starting, and provide outstanding engine wear protection under a variety of operating conditions. Meets or exceeds the requirements of: API SN, SM, SL, API SN Plus.

Product Features:
  • Mobil Super Synthetic Blend motor oil 10W-30 works to protect your engine from sludge and deposits for up to 5,000 miles
  • Helps to keep your engine clean with 15 percent extra cleaning additives, preventing sludge and deposit formation
  • Works to provide outstanding engine wear protection under a variety of operating conditions
  • Enhanced formulation (vs. Mobil basic conventional oil) helps to conserves oil viscosity for easier cold starting
  • Recommended for gasoline cars and light-duty trucks
See More

FRAM – 5W-30 Full Synthetic Motor Oil: 5 Quart (Part No.F930-5QT)

5W-30 Full Synthetic Motor Oil: 5 Quart

from

$27.99
FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
  • Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
  • Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
  • Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
  • Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.
See More

FRAM – 5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control (Part No.F620-5QT)

5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control

from

$25.99
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

FRAM – Full Synthetic High Mileage 5W-30 Engine Oil: 5 Quart (Part No.F933-5QT)

Full Synthetic High Mileage 5W-30 Engine Oil: 5 Quart

from

$28.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

FRAM – 5 Qt Engine Oil High Milage Conventional 5W30 Restores Seals to Reduce Oil Consumption (Part No.F660-5QT)

5 Qt Engine Oil High Milage Conventional 5W30 Restores Seals to Reduce Oil Consumption

from

$25.99
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
See More

FRAM – 5W-30 Full Synthetic Motor Oil: 1 Quart (Part No.F930)

5W-30 Full Synthetic Motor Oil: 1 Quart

from

$7.49
FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
  • Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
  • Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
  • Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
  • Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.
See More

FRAM – 5W-30 Conventional Motor Oil with Low-Speed Pre-Ignition Control, 1 Quart (Part No.F620)

5W-30 Conventional Motor Oil with Low-Speed Pre-Ignition Control, 1 Quart

from

$6.49
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W30 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

FRAM – Conventional 10W30 Engine Oil with Low-Speed Pre-Ignition Control – 5 Qt (Part No.F630-5QT)

Conventional 10W30 Engine Oil with Low-Speed Pre-Ignition Control - 5 Qt

from

$25.99
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.
See More

FRAM – 10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart (Part No.F630)

10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart

from

$6.49
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-Speed Pre-Ignition Control
  • Chain Wear Protection
  • Piston Cleanliness
  • Turbo-Compatibility
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Versatile Compatibility: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI), as well as older carbureted or normally fuel-injected gasoline engine designs.
  • High-Quality Conventional Base Stocks: Utilizes a blend of high-quality conventional base stocks to ensure reliable engine protection across a broad range of operating conditions.
  • Meets Stringent Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories, ensuring it meets the latest industry requirements.
  • SAE oil weight of 10W-30, making it a dependable choice for various engine types.
See More

FRAM – High Milage Conventional 5W-30 Motor Oil – Helps Restore Seal Condition, 1 Quart (Part No.F660)

High Milage Conventional 5W-30 Motor Oil - Helps Restore Seal Condition, 1 Quart

from

$6.49
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
See More

FRAM – Full Synthetic High Mileage 10W-30 Motor Oil: 5 Quart (Part No.F943-5QT)

Full Synthetic High Mileage 10W-30 Motor Oil: 5 Quart

from

$28.99
FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
  • Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs.
  • Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.
See More

FRAM – 10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quarts (Part No.F940-5QT)

10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quarts

from

$27.99
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:
  • Outstanding thermal and oxidation stability
  • Excellent sludge and varnish protection
  • Faster oil flow at start-up
  • Volatility: Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 10W-30 is formulated with high-quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine.
  • Advanced LSPI Prevention: Contains additive technology specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
  • Enhanced Wear Protection: Offers increased wear protection, ensuring your engine components remain in optimal condition even under rigorous driving conditions.
  • Versatile Engine Compatibility: Suitable for a wide range of engines, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for various vehicle types.
See More

FRAM – Full Synthetic High Mileage 5W-30 Motor Oil: 1 Quart (Part No.F933)

Full Synthetic High Mileage 5W-30 Motor Oil: 1 Quart

from

$7.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
  • Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
  • Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.
See More

FRAM – 10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart (Part No.464-32)

10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart

from

$7.29
10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart

FRAM – Full Synthetic 10W-30 Motor Oil – Helps Extend Motor Life, 1 Quart (Part No.F940)

Full Synthetic 10W-30 Motor Oil - Helps Extend Motor Life, 1 Quart

from

$7.49
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.

Product Features:
  • Outstanding thermal and oxidation stability
  • Excellent sludge and varnish protection
  • Faster oil flow at start-up
  • Volatility: lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Ultimate engine protection: FRAM Full Synthetic Oil 10W30 1 QT is specifically formulated with high-quality synthetic base stocks and advanced additive technology to provide the ultimate protection for your engine, ensuring its longevity and performance.
See More

FRAM – 10W-30 High Mileage Full Synthetic Motor Oil: 1 Quart (Part No.F943)

10W-30 High Mileage Full Synthetic Motor Oil: 1 Quart

from

$7.99
FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

Top-Rated Oil and Lubricants Brands For Your 1993 Mazda RX-7

Shop for the best-rated brands offering Oil and Lubricants and other products for your 1993 Mazda RX-7s. Below you’ll find some of our best rated Oil and Lubricants from Castrol and Mobil Super, and more. Oil and Lubricants from these brands that fit a 1993 RX-7 start at just $5.89 and are rated as high as 5 stars. OEM and aftermarket Oil and Lubricants don’t get more top quality, durable, and affordable than from the brands below.

Popular Castrol 1993 Mazda RX-7 Oil and Lubricants

When it comes to maintaining or upgrading your 1993 Mazda RX-7, using quality Oil and Lubricants is essential to ensure durability and a perfect fit. Castrol ticks all of those boxes. We offer a wide selection of Castrol Oil and Lubricants, specifically designed for the 1993 Mazda RX-7. With over 4 Castrol brand Oil and Lubricants in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $9.99, with an average price of just $19.99. Plus, with over 1,106 customer reviews and an average rating of 5 stars, you can trust that our Castrol Oil and Lubricants will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

GTX  5W-30 Synthetic Blend Motor Oil, 5 Quart
from
$29.99

(333)

GTX 5W-30 Synthetic Blend Motor Oil, 5 Quart

“Great sale package with filter.”

GTX 5W-20 Synthetic Blend Motor Oil, 5 Quarts
from
$9.99

(333)

GTX 5W-20 Synthetic Blend Motor Oil, 5 Quarts

“Good price and good product”

GTX 10W-30 Conventional Motor Oil, 5 Quarts
from
$29.99

(220)

GTX 10W-30 Conventional Motor Oil, 5 Quarts

“Great product!”

Popular Mobil Super 1993 Mazda RX-7 Oil and Lubricants

Mobil Super auto parts is one of the highest quality Oil and Lubricant brands in the market. Any 1993 Mazda RX-7 owner should feel confident when installing genuine Mobil Super parts in their vehicle. To ensure the best fit and performance for your 1993 RX-7, Advance Auto Parts carries a full inventory of 3 Mobil Super Oil and Lubricants. Plus you will be keeping your Mazda in peak condition while saving money because prices on these Mobil Super Oil and Lubricants range from $5.89 to $25.99, plus, with more than 97 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Oil and Lubricants below will deliver on both quality and value.

5W-30 Synthetic Blend Motor Oil, 5 Quart
from
$25.99

(33)

5W-30 Synthetic Blend Motor Oil, 5 Quart

“Great oil”

10W-30 Synthetic Blend Motor Oil, 5 Quart
from
$25.99

(32)

10W-30 Synthetic Blend Motor Oil, 5 Quart

“It worked as should”

10W-30 Synthetic Blend Motor Oil, 1 Quart
from
$5.89

(32)

10W-30 Synthetic Blend Motor Oil, 1 Quart

“Excellent oil, used it for quite a few years, it was in sale so couldn’t pass it up”

FAQs for 1993 Mazda RX-7 Oil and Lubricants

Which Oil and Lubricants are best-sellers for 1993 Mazda RX-7s?

Out of 22 Oil and Lubricants that fit 1993 Mazda RX-7s, the following parts are the top sellers:

What’s the price range for 1993 Mazda RX-7 Oil and Lubricants?

Oil and Lubricant prices for the 1993 Mazda RX-7 start at $5.89 and go up to $29.99 for the most premium parts.

What’s the average price of a Oil and Lubricant for a 1993 Mazda RX-7?

The average price for Oil and Lubricants for the 1993 Mazda RX-7 is $17.61. Keep in mind the variety of part types within our Oil and Lubricant category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Oil and Lubricants for other Mazda RX-7 model years?

Yes, we currently carry Oil and Lubricants for 14 model years of Mazda RX-7s between 1980 and 1995. Oil and Lubricants are bought most frequently for the following model years: 1995, 1994, 1991, 1990, 1989, 1988, 1987, 1986, and 1985.

What are the cheapest Oil and Lubricants for my 1993 Mazda RX-7?

What are the top-rated Oil and Lubricants that fit the 1993 Mazda RX-7?

Out of 1,203 reviews by customers, our 1993 Mazda RX-7 Oil and Lubricants have an average customer rating of . These are some of the highest-rated Oil and Lubricant types for the 1993 Mazda RX-7 and their top-rated products:

What types of Oil and Lubricants do you sell for my 1993 Mazda RX-7?

As of 2/5/25, these are some of the most in-demand types of Oil and Lubricants for a 1993 Mazda RX-7:

Can I get help with 1993 Mazda RX-7 Oil and Lubricant orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mazda Oil and Lubricants and more.

What is your return policy for Mazda RX-7 Oil and Lubricants?

Advance Auto Parts keeps returns simple. For new Mazda RX-7 Oil and Lubricants and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.