1993 Kenworth W900 Engine Cooling Parts

Essential 1993 Kenworth W900 Engine Cooling Parts

Fram – Coolant Spin-on Filter (Part No.PR3908)

Coolant Spin-on Filter

from

$16.99
Coolant Spin-on Filter

Fram – Coolant Filter: Heavy Duty, HD Spin-On Coolant Filter (Part No.PR8694)

Coolant Filter: Heavy Duty, HD Spin-On Coolant Filter

from

$48.99
Since 1934 FRAM has been a pioneer in the fields of automotive and non-automotive filtration. FRAM is committed to providing you and your vehicle with the very best in engine protection with premium, application-specific filtration products. FRAM’s dedication is backed by substantial, ongoing research in filtration media, filter design and manufacturing processes.

Product Features:
  • High durability and reliable performance
  • Excellent dirt-holding capacity
  • Low flow restriction
See More

Fram – Coolant Spin-on Filter (Part No.PR3383)

Coolant Spin-on Filter

from

$15.79
Coolant Spin-on Filter

Carquest Premium – Controlled Release Coolant Spin-on with BTA PLUS Formula (Part No.89082)

Controlled Release Coolant Spin-on with BTA PLUS Formula

from

$172.99
The objective of diesel engine coolant filters, also known as water filters, is to remove contaminants from the engine cooling system and add chemicals to the coolant itself to replenish important protectants that may be lost over time.

Product Features:
  • Flow Control Orifice that meters flow of coolant through filter to allow coolant additives to be released in the amount required to maintain proper system balance for up to 150,000 miles of service.
  • Made in USA
  • Includes Flow Control Orifice that meters flow of coolant through filter to allow coolant additives to be released in the amount required to maintain proper system balance for up to 150,000 miles of service.
  • Can be used with 89019 base.
See More

Carquest Premium – Coolant Spin-on with BTA PLUS Formula (Part No.89112)

Coolant Spin-on with BTA PLUS Formula

from

$131.99
CARQUEST HD coolant filters are designed to meet or exceed OE performance over the entire OE recommended service interval.

Product Features:
  • Standard life Spin-on coolant filter
  • Made in USA
  • Includes 11 1/2 Units BTA PLUS
See More

Carquest Premium – Coolant Spin-on with BTA PLUS Formula (Part No.96324)

Coolant Spin-on with BTA PLUS Formula

from

$28.99
CARQUEST HD coolant filters are designed to meet or exceed OE performance over the entire OE recommended service interval.

Product Features:
  • Standard life Spin-on coolant filter
  • Made in USA
  • Includes 4 Units BTA PLUS
  • Maintenance filter for systems with 7-16 gallons capacity. Can be used with 89019 base.
See More

Carquest Premium – Coolant Spin-on without Chemicals (Part No.89113)

Coolant Spin-on without Chemicals

from

$82.99
CARQUEST HD coolant filters are designed to meet or exceed OE performance over the entire OE recommended service interval.

Product Features:
  • Standard life Spin-on coolant filter
  • Made in USA
  • Long Life (150,000 miles) used with Extended Service coolant.
See More

Carquest Premium – Coolant Spin-on with BTA PLUS Formula (Part No.99065)

Coolant Spin-on with BTA PLUS Formula

from

$69.99
CARQUEST HD coolant filters are designed to meet or exceed OE performance over the entire OE recommended service interval.

Product Features:
  • Standard life Spin-on coolant filter
  • Made in USA
  • Includes 23 Units BTA PLUS
  • Maintenance filter for systems with 52-70 gallons capacity. Can be used with 89019 base.
See More

Carquest Premium – Coolant Spin-on without Chemicals (Part No.89083)

Coolant Spin-on without Chemicals

from

$116.99
CARQUEST HD coolant filters are designed to meet or exceed OE performance over the entire OE recommended service interval.

Product Features:
  • Standard life Spin-on coolant filter
  • Made in USA
  • Long Life (150,000 miles) used with Extended Service coolant. Can be used with 89019 base.
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T3098)

Engine Water Pump: New, Gasket/Seals Included

from

$534.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

Gates – Heavy-Duty Engine Water Pump (Part No.41173HD)

Heavy-Duty Engine Water Pump

from

$137.99
Product Features:
  • Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
  • 100 percent fully tested unitized bearings and seals
  • Computerized machined surfaces for proper fit and sealing
  • Gates heavy-duty water pumps are represented as a part number with an HD suffix
  • Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
  • New pumps manufactured to ISO/TS 16949 standards
See More

Gates – Heavy-Duty Engine Water Pump (Part No.45054HD)

Heavy-Duty Engine Water Pump

from

$569.99
Product Features:
  • Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
  • 100 percent fully tested unitized bearings and seals
  • Computerized machined surfaces for proper fit and sealing
  • Gates heavy-duty water pumps are represented as a part number with an HD suffix
  • Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
  • New pumps manufactured to ISO/TS 16949 standards
See More

Driveworks Water Pumps – Water Pump (Part No.59-8215)

Water Pump

from

$272.99
Using advanced re-engineering materials and processes, our remanufactured water pumps match O.E. fit and performance. Each unit is supplied with new, unitized seals and the proper O.E.-specified bearing design to meet the specific radial and axial load re

Product Features:
  • 100% leak testing and hub-pull testing ensures reliable performance.
  • O.E.-supplied NEW unitized seals ensure long-lasting, trouble-free performance.
  • The proper O.E. specified bearing design is installed to meet the specific radial and axial load requirements of each application. This ensures longer bearing life and reliable performance.
  • Thermostat seal and mounting gasket are supplied for ease of installation (where applicable).
See More

Gates – Heavy-Duty Engine Water Pump (Part No.43307HD)

Heavy-Duty Engine Water Pump

from

$450.99
Product Features:
  • Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
  • 100 percent fully tested unitized bearings and seals
  • Computerized machined surfaces for proper fit and sealing
  • Gates heavy-duty water pumps are represented as a part number with an HD suffix
  • Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
  • New pumps manufactured to ISO/TS 16949 standards
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T5003)

Engine Water Pump: New, Gasket/Seals Included

from

$147.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

Carquest Premium – Heavy Duty Thermostat: With Seal, 190 Degrees (Part No.14239)

Heavy Duty Thermostat: With Seal, 190 Degrees

from

$40.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Heavy Duty Thermostat: 180 Degrees (Part No.14008)

Heavy Duty Thermostat: 180 Degrees

from

$50.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Heavy Duty Thermostat: With Seal, 190 Degrees (Part No.15229)

Heavy Duty Thermostat: With Seal, 190 Degrees

from

$51.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Heavy Duty Thermostat: With Seal, 170 Degrees (Part No.15197)

Heavy Duty Thermostat: With Seal, 170 Degrees

from

$52.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Heavy Duty Thermostat: With Seal, 160 Degrees (Part No.15006)

Heavy Duty Thermostat: With Seal, 160 Degrees

from

$84.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Heavy Duty Thermostat: With Seal, 190 Degrees (Part No.15009)

Heavy Duty Thermostat: With Seal, 190 Degrees

from

$85.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Gates – Heavy-Duty Engine Water Pump (Part No.44600HDBP)

Heavy-Duty Engine Water Pump

from

$108.99
Product Features:
  • Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
  • 100 percent fully tested unitized bearings and seals
  • Computerized machined surfaces for proper fit and sealing
  • Gates heavy-duty water pumps are represented as a part number with an HD suffix
  • Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
  • New pumps manufactured to ISO/TS 16949 standards
See More

1993 Kenworth W900 Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 1993 Kenworth W900. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 29 different Engine Cooling Parts in our inventory ranging from $15.79 to $703.99. That means you can find the exact parts or products you need to keep that 1993 Kenworth W900 running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1993 Kenworth W900. Carquest Premium, Gates, and FRAM are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 1993 Kenworth W900, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 1993 Kenworth W900 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 1993 Kenworth W900 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1993 Kenworth W900 demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your W900 the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

FAQs for 1993 Kenworth W900 Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 1993 Kenworth W900?

Out of 29 Engine Cooling Parts for the 1993 Kenworth W900, the most popular in our inventory are:
Heavy Duty Thermostat: With Seal, 190 Degrees
from $38.49
This product is not rated
Heavy Duty Thermostat: With Seal, 190 Degrees
Thermostats
Coolant Spin-on with BTA PLUS Formula
from $28.99
This product is not rated
Coolant Spin-on with BTA PLUS Formula
Cooling System Filters
Heavy Duty Thermostat: With Seal, 190 Degrees
from $51.99
This product is not rated
Heavy Duty Thermostat: With Seal, 190 Degrees
Thermostats