1993 Jeep Wrangler Performance Air Intake Kits

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:

• DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
• IMPROVED ENGINE SOUND: Hear the power under the hood
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
• HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
• WILL NOT VOID VEHICLE WARRANTY

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:

• DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
• IMPROVED ENGINE SOUND: Hear the power under the hood
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
• HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
• WILL NOT VOID VEHICLE WARRANTY
• Product might not be available in all states due to local laws.

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:

• DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
• IMPROVED ENGINE SOUND: Hear the power under the hood
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
• HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
• WILL NOT VOID VEHICLE WARRANTY

A Rugged Ridge Cold Air Intake System can boost your performance, while helping you keep extra cash in your wallet. Our polished aluminum mandrel bent intake tube replaces the restrictive factory air box to help improve fuel economy.

Product Features:

• Polished Mandrel Bent 6063 Aluminum Air Intake Tube
• Easy No-drill Install
• High-Flow Conical Dry Panel Filter
• Black Powder Coated Heat Shield
• Improves Fuel Economy Up to 10 Percent

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

The K&N 57-1566 FIPK air intake system replaces the restrictive factory air filter and air intake housing in specific Jeep Wrangler models. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air with less effort than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. This air intake comes with a chrome topped K&N high-flow air filter and a K&N embossed heat shield that mounts into the lower air box to act as a cover allowing cooler, denser air to be directed through a custom molded intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

Unique One-Piece High Quality Housing w/ Sight Window:A custom computer designed roto-molded housing eliminates the use of multiple components and ensures the coolest air intake charge available. A clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made of heat soak resistant cross-linked polyethylene. The housing is designed to retain the same water fording height as the factory intake system while providing more air flow and better protection.

Product Features:

• High Quality One-Piece Roto-Molded Sealed Housing
• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• Unique Filter-to-Housing Interface for Easy Installation (Patent Pending)
• CAD-Designed Roto-Molded Intake Tube w/ Resonance Chambers

Unique Integrated Filter-to-Housing Design:Quantum uses an integrated filter-to-housing design that attaches both components with four captive screws, making for a positive surface area seal and easy installation. Its durable sealed housing features a unique, five rib, industrial-grade look for aFe quality recognition.Quantum Pro 5R Performance Air Filter:The Pro 5R performance air filter features five layers of progressively finer porosity cotton gauze media, providing maximum performance. Quantum air filters are specifically designed for Quantum Series intake systems with an injection molded base and top for lighter weight and rigidity. The filter base also features a 3-angle velocity stack for smooth, even air flow.Dyno-Tuned Intake Tube:Quantum uses a dyno tuned, CAD-designed intake tube to achieve optimum air flow. It’s made from high impact, XLPE material for heat soak resistance and durability.Silicone Bellows Coupling:The Quantum Intake System includes silicone bellows couplings to absorb excessive engine movement and provide flexibility for a secure and easy install. Quantum intakes are designed with fewer parts for a quick and simple installation.Hassle-Free Installation:This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. The filter securely fastens to the housing with four captive screws, eliminating lost hardware, while a silicone bellows coupling absorbs excessive engine movement and provides flexibility for an easy install.

Product Features:

• Dyno-Proven Gains up to +11 HP and +13 Lbs. x Ft. TQ
• Outflows Factory Intake by 47%
• Pro 5R Filter: Pre-Oiled, 5-Layer Progressive Cotton Media for Maximum Flow and Filtration
• Unique Filter-to-Housing Interface

A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. (US PAT 9440175) For Filter-to-Housing Interface. This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large 5″ flange and is 9″ tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

Product Features:

• High Quality 1-Pc. Roto-Molded Sealed Housing
• CAD Designed Roto-Molded Intake Tube
• Built In Sight Window Provides Easy Inspection Of Filter
• Unique Filter-to-Housing Interface

9″ Tall Air Filter:This intake system utilizes an oil free, 9″ tall inverted top conical 360-degree radial flow performance air filter with three layers of synthetic media providing maximum airflow and performance. The filter mounts to a 3-angle adapter for improved volumetric efficiency and maximum performance.Mandrel-Bent Tubing:One Piece 3″ Mandrel-Bent Wrinkle-Black Powder-Coated aluminum intake tube directs unrestricted airflow from the filter to the throttle body for more horsepower and torque.One-Piece Heat Shield:Sturdy 18 Gauge Powder-Coated One-Piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation.Hassle-Free Installation:All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

Product Features:

• Outflows Factory Intake by 39%
• Pro DRY S oil-free 3-Layer Progressively Finer Porosity Synthetic Media for Maximum Convenience
• Powder-Coated One Piece 18 Gauge Steel Housing utilizes stock mounting locations
• No Cutting or Drilling on Factory Parts for Faster Installation

Unique One-Piece High Quality Housing w/ Sight Window:_x000d_A custom computer designed roto-molded housing eliminates the use of multiple components and ensures the coolest air intake charge available. A clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made of heat soak resistant cross-linked polyethylene. The housing is designed to retain the same water fording height as the factory intake system while providing more air flow and better protection.

Product Features:

• High Quality One-Piece Roto-Molded Sealed Housing
• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• Unique Filter-to-Housing Interface for Easy Installation (Patent Pending)
• CAD-Designed Roto-Molded Intake Tube w/ Resonance Chambers

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

A custom computer designed roto-molded housing eliminates the use of multiple components and ensures the coolest air intake charge available. A clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. The housing is designed to retain the same water fording height as the factory intake system while providing more air flow and better protection. This System uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has built-in resonance chambers to catch un-wanted air intake noises. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This filter has a massive 5″ round flange and is 8″ tall with an inverted top and features our pre-oiled Pro GUARD7media. The Pro GUARD7performance air filter features 5-layers of progressive cotton media with 2-layers of progressive synthetic media providing 99.7% cumulative efficiency for maximum filtration. (US PAT 06811588) The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium stainless steel T-bolt clamps are used for durability and provide the best corrosion resistance possible. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

Product Features:

• Roto Molded Intake Tube
• Inspection of Filter Without Disassembly
• Unique Filter-To-Housing Interface For Easy Installation
• No Cutting Or Drilling On Factory Parts For Easy Installation

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:

• DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
• IMPROVED ENGINE SOUND: Hear the power under the hood
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
• HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
• WILL NOT VOID VEHICLE WARRANTY

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

Product Features:

• Designed Using The Most Up To Date Engineering Tools
• Perfect Blend Of Power And Protection
• 1-Piece Sealed Housing w/Tire Tread Top
• Massive Air Filter And Premium Hardware

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

• Pro 5R Filter Media
• 5 Layer Progressive Cotton Gauze Media
• Washable And Reusable Air Filter
• Improved Throttle Response

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

Product Features:

• Designed Using The Most Up To Date Engineering Tools
• Perfect Blend Of Power And Protection
• 1-Piece Sealed Housing w/Tire Tread Top
• Massive Air Filter And Premium Hardware

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:

• DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
• IMPROVED ENGINE SOUND: Hear the power under the hood
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
• HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
• WILL NOT VOID VEHICLE WARRANTY
• Product might not be available in all states due to local laws.

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

• 1-Piece Housing
• 5 Layer Performance Air Filter
• Premium Hardware

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

Product Features:

• Pro DRY S Filter Media
• 3 Layer Synthetic Oil-Free Media
• Washable And Reusable
• Huge 5 in. Flange w/Inverted Top Air Filter

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

Product Features:

• Pro 5R Filter Media
• 5-Layer Progressive Cotton Gauze Media
• Washable And Reusable
• Huge 5 in. Flange w/Inverted Top Air Filter

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.