1993 Jaguar XJ6 Fuel and Emissions Systems

Essential Fuel and Emissions Systems for 1993 Jaguar XJ6s

DENSO – Original Equipment Quality Electric Fuel Pump (Part No.951-0008)

Original Equipment Quality Electric Fuel Pump

from

$124.99
As the innovator and leader in fuel supply technology, DENSO has conducted superior testing and inspection processes to insure the highest quality fuel supply product. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

Delphi – Electric Fuel Pump: With Extra Fittings, Insulating Sleeve, Nuts/Washers, Terminal Hardware (Part No.FE0023)

Electric Fuel Pump: With Extra Fittings, Insulating Sleeve, Nuts/Washers, Terminal Hardware

from

$221.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Improved pump performance as a result of Delphi’s innovative design and durability
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Always replace the fuel strainer when doing a fuel pump repair
See More

Carquest Premium – Fuel Pump Relay (Part No.RAA2718)

Fuel Pump Relay

from

$45.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Delphi – Fuel Pump Strainer (Part No.FS0092)

Fuel Pump Strainer

from

$35.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Filtration performance and micron rating meet or exceed OE requirements
  • OE replacement strainer designed for use with Delphi electric fuel pumps
  • Replacing the strainer is always recommended when replacing a fuel pump
See More

Delphi – Fuel Pump Strainer (Part No.FS0120)

Fuel Pump Strainer

from

$11.49
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Filtration performance and micron rating meet or exceed OE requirements
  • OE replacement strainer designed for use with Delphi electric fuel pumps
  • Replacing the strainer is always recommended when replacing a fuel pump
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS055)

Fuel Injector Seal Kit

from

$4.29
Product Features:
  • Premium OE quality materials
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS010)

Fuel Injector Seal Kit

from

$11.49
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

Delphi – Fuel Injection Pressure Regulator (Part No.FP10559)

Fuel Injection Pressure Regulator

from

$109.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
  • Quiet operation, no audible regulator noise
  • Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
  • Consistent and predictable fuel pressure throughout system range of control provides great drivability
See More

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1019)

Fuel Injection Pressure Regulator

from

$65.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More

Bosch – Bosch Purge Valve (Part No.B708062614BOS)

Bosch Purge Valve

from

$63.74
The high-performance TEV canister purge valve constructed of plastic complies with all the requirements of manifold injection and gasoline direct injection.

Product Features:
  • Favorable price-to-performance ratio
  • Optimized triggering when minimal amounts are detected, giving quiet idling
  • Steeper rise of characteristic line
  • High maximum flow Installation on engine generates less noise
  • Integrated protective sieve prevents accumulation of dirt
  • Compact and light
  • Quick and simple fitting
See More

ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)

Multi-Purpose Wire Connector with Leads

from

$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

DENSO – Oxygen Sensor: 3 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-3090)

Oxygen Sensor: 3 Wire, 11.77" Long, Heated, Universal Fit

from

$82.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Bosch – Oxygen Sensor: 1 Wire, 8.35" Long, Non-heated, Exact Fit (Part No.12046)

Oxygen Sensor: 1 Wire, 8.35" Long, Non-heated, Exact Fit

from

$39.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

Eurospare – Eurospare Idle Control Valve (Part No.C403053363ESP)

Eurospare Idle Control Valve

from

$206.22
The Eurospare Idle Control Valve is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Corrosion resistant housing material
  • Premium materials for longer service life
  • Meets or exceeds OEM specifications
See More

Original Equipment – Fuel Tank Sender Ass (Part No.E200542656OEA)

Fuel Tank Sender Ass

from

$155.72
Fuel Tank Sender Ass

Original Equipment – Fuel Tank Sender Ass (Part No.E200542657OEA)

Fuel Tank Sender Ass

from

$134.42
Fuel Tank Sender Ass

Eurospare – Fuel Tank Sender Ass (Part No.E2005240582ESP)

Fuel Tank Sender Ass

from

$151.04
Fuel Tank Sender Ass

Original Equipment – Original Equipment EGR Valve Gasket (Part No.B710043014OEA)

Original Equipment EGR Valve Gasket

from

$5.21
The Original Equipment EGR Valve Gasket is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1004)

Exhaust Gas Recirculation (EGR) Valve Gasket

from

$7.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Eurospares – Eurospare EGR Valve Gasket (Part No.B7100435854ESP)

Eurospare EGR Valve Gasket

from

$3.27
The Eurospare EGR Valve Gasket is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Eurospares – Eurospare Fuel Injector (Part No.C1000107056ESP)

Eurospare Fuel Injector

from

$167.88
Eurospare fuel injectors are manufactured to OE requirements that meet federal emissions and fuel economy standards, and provide exact OE fit for ease of installation. Eurospare injectors are manufactured using internal components that are compatible with alternative fuels or fuel blends, including ethanol mixtures.

Product Features:
  • Original Equipment Manufacturer
  • Premium internal components
  • OE Calibrated impedance
  • Fine atomized spray reduces emissions
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A213-1125)

Remanufactured Fuel Injector

from

$43.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-2275)

Remanufactured Fuel Injector

from

$44.49
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

APA/URO Parts – Fuel Sender Seal (Part No.E205041700APA)

Fuel Sender Seal

from

$6.50
Fuel Sender Seal

Upgrade your 1993 Jaguar XJ6 with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1993 Jaguar XJ6, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jaguar or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your XJ6 functioning at its best. At Advance Auto Parts, we offer a wide selection of 24 Fuel and Emissions Systems for the 1993 Jaguar XJ6, designed to meet your needs without breaking the bank. From Oxygen Sensor replacements to Fuel Pumps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1993 Jaguar XJ6 at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $3.29 to $245.99, with an average price of $74.19. Our 24 Fuel and Emissions Systems in stock come from 8 trusted brands, so you’re sure to find the right part for your 1993 Jaguar XJ6 without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1993 Jaguar XJ6 is always ready to roll. We’re committed to providing you with everything you need to keep your XJ6 in top shape, all in one place. Start shopping confidently below for your 1993 Jaguar XJ6!

Best-Selling Oxygen Sensors for 1993 Jaguar XJ6s

Enhance the driving experience in your Jaguar with 5 quality Oxygen Sensor components, starting at $74.99.

Bosch – Oxygen Sensor: 3 Wire, 28.54" Long, Heated, Universal (Part No.15735)

Oxygen Sensor: 3 Wire, 28.54" Long, Heated, Universal

from

$79.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications
See More

DENSO – Oxygen Sensor: Upstream, 3 Wire, 49.49" Long, Heated, Exact Fit (Part No.234-3048)

Oxygen Sensor: Upstream, 3 Wire, 49.49" Long, Heated, Exact Fit

from

$97.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

DENSO – Oxygen Sensor: Upstream, 3 Wire, 38.82" Long, Heated, Exact Fit (Part No.234-3019)

Oxygen Sensor: Upstream, 3 Wire, 38.82" Long, Heated, Exact Fit

from

$99.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

DENSO – Oxygen Sensor: 3 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-3090)

Oxygen Sensor: 3 Wire, 11.77" Long, Heated, Universal Fit

from

$82.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

DENSO – Oxygen Sensor: 3 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-3000)

Oxygen Sensor: 3 Wire, 11.77" Long, Heated, Universal Fit

from

$74.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Most Popular 1993 Jaguar XJ6 Fuel Pumps

Customize your Jaguar with 7 Fuel Pumps products like Fuel Pumps, Electric Pump Filter and Strainers, and Fuel Pump Relays, all priced under $245.99.

Delphi – Fuel Pump Strainer (Part No.FS0120)

Fuel Pump Strainer

from

$11.49
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Filtration performance and micron rating meet or exceed OE requirements
  • OE replacement strainer designed for use with Delphi electric fuel pumps
  • Replacing the strainer is always recommended when replacing a fuel pump
See More

Carquest Premium – Fuel Pump Includes Wiring Harness and Strainer (Part No.E312899)

Fuel Pump Includes Wiring Harness and Strainer

from

$104.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Carquest Premium – Fuel Pump Includes Includes Strainer (Part No.E2284789)

Fuel Pump Includes Includes Strainer

from

$55.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Carquest Premium – Fuel Pump E2246797 (Part No.E2246797)

Fuel Pump E2246797

from

$245.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Delphi – Fuel Pump and Strainer Set: With Clamps (Part No.FE0199)

Fuel Pump and Strainer Set: With Clamps

from

$121.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Improved pump performance as a result of Delphi’s innovative design and durability
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Part is validated, tested and matched to the right vehicle application
  • When servicing the fuel system, always check the fuel filter for possible replacement
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Always replace the fuel strainer when doing a fuel pump repair
See More

APA/URO Parts – Fuel Pump (Part No.E300039684APA)

Fuel Pump

from

$116.84
Fuel Pump

Carquest Premium – Fuel Pump Relay (Part No.RAA2718)

Fuel Pump Relay

from

$45.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Top Picks for 1993 Jaguar XJ6 Air Flow Sensors

Upgrade Jaguar XJ6s with top-quality Air Flow Sensors parts, including 1 OEM and aftermarket selections for your 1993 model.

ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)

Multi-Purpose Wire Connector with Leads

from

$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

In-Demand Fuel Injectors for 1993 Jaguar XJ6s

Select from 5 premium Fuel Injectors parts for your 1993 Jaguar XJ6, with prices ranging from $3.29 to $109.99.

ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with Seals with 2 O-Rings (Part No.217-3414)

Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with Seals with 2 O-Rings

from

$10.29
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest – Fuel Injector Seal Kit (Part No.274838)

Fuel Injector Seal Kit

from

$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • High-quality materials withstand extreme conditions
  • Undergoes extensive testing to ensure reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

Delphi – Fuel Injection Pressure Regulator (Part No.FP10559)

Fuel Injection Pressure Regulator

from

$109.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
  • Quiet operation, no audible regulator noise
  • Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
  • Consistent and predictable fuel pressure throughout system range of control provides great drivability
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-2275)

Remanufactured Fuel Injector

from

$44.49
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 2 O-Rings (Part No.217-3366)

Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 2 O-Rings

from

$3.29
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Most Sold 1993 Jaguar XJ6 Fuel Tanks

Explore our best-selling Jaguar parts for the 1993 XJ6 among 3 OEM and aftermarket options starting from $6.50.

APA/URO Parts – Fuel Sender Seal (Part No.E205041700APA)

Fuel Sender Seal

from

$6.50
Fuel Sender Seal

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Eurospare – Fuel Tank Sender Ass (Part No.E2005240582ESP)

Fuel Tank Sender Ass

from

$151.04
Fuel Tank Sender Ass

FAQs for 1993 Jaguar XJ6 Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1993 Jaguar XJ6s?

Out of 24 Fuel and Emissions Systems that fit 1993 Jaguar XJ6s, the following parts are the top sellers:

What’s the price range for 1993 Jaguar XJ6 Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1993 Jaguar XJ6 start at $3.29 and go up to $245.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1993 Jaguar XJ6?

The average price for Fuel and Emissions Systems for the 1993 Jaguar XJ6 is $74.19. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Jaguar XJ6 model years?

Yes, we currently carry Fuel and Emissions Systems for 25 model years of Jaguar XJ6s between 1972 and 1997. Fuel and Emissions Systems are bought most frequently for the following model years: 1997, 1996, 1995, 1994, 1992, 1991, 1990, 1989, and 1988.

What are the cheapest Fuel and Emissions Systems for my 1993 Jaguar XJ6?

The cheapest 1993 Jaguar XJ6 Fuel and Emissions Systems we carry in stock are:

What types of Fuel and Emissions Systems do you sell for my 1993 Jaguar XJ6?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1993 Jaguar XJ6:

Can I get help with 1993 Jaguar XJ6 Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jaguar Fuel and Emissions Systems and more.

What is your return policy for Jaguar XJ6 Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Jaguar XJ6 Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.