1993 Infiniti G20 Engine Cooling Parts

Essential 1993 Infiniti G20 Engine Cooling Parts

Stant – Radiator and Reservoir Caps (Part No.G101032815STN)

Radiator and Reservoir Caps

from

$8.06
Stant offers a wide variety of radiator cap styles and applications for U.S. and import cars, light trucks, HD trucks, racing, off-road and ag equipment. In addition to the standard OE line of caps, a unique line of high- and low- pressure racing caps are available for high performance vehicles. Additionally, the Lev-R-Vent caps are designed with a lever release to safely release pressure for quicker cooling. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.

Product Features:
  • The SWIV-EL design allows the cap to be installed and removed much easier than conventional radiator caps.
  • Meets Original Equipment specifications.
  • Made from premium materials.
  • Designed to function on open cooling systems and overflow reservoir type systems.
  • The Lev-R-Vent features a patented lever release to safely release pressure for quicker cooling.
See More

Carquest Premium – Multi Purpose Relay (Part No.FCA1004)

Multi Purpose Relay

from

$17.29
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – High Flow Thermostat: 170 Degrees (Part No.13967)

High Flow Thermostat: 170 Degrees

from

$14.29
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. With the enlarged Orpheus opening, this high flowing thermostat will allow for more gallons per second to flow. This will allow for the engine to cool down at a faster rate compared to the OE to allow for quick and precise cooling for your engine. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • Larger opening for increased coolant flow
  • Increased strength and durability
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • 100% tested and calibrated
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12021)

Radiator Cap Tester Adapter

from

$17.79
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Dorman – Engine Coolant Thermostat Housing Cover (Part No.G4011314899DOR)

Engine Coolant Thermostat Housing Cover

from

$65.06
Dorman’s Engine Coolant Thermostat Housing has improved durability and resistance. It withstands the extreme changes in temperature that frequently cause housing to become brittle, crack and leak. Maintain the steady flow of coolant and lessen the chances of overheating.

Product Features:
  • Direct replacement for a proper fit every time
  • Hoses slide on for easy installation
  • High-quality plastic or metal construction
  • Includes all hardware necessary for a complete repair (where applicable)
See More

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 45 Degree Neck Angle (Part No.902-5028)

Coolant Housing/Water Outlet: With Housing and Gasket, 45 Degree Neck Angle

from

$44.49
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.620-435)

Radiator Fan Assembly: Dual, Cost Effective & Reliable

from

$268.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part.
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.620-417)

Radiator Fan Assembly: Single, Cost Effective And Reliable

from

$114.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part.
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Ohno – Radiator Drain Plug (Part No.G1060122008OHN)

Radiator Drain Plug

from

$6.19
Radiator Drain Plug

Dorman – Help – Radiator Drain Cocks (Part No.61137)

Radiator Drain Cocks

from

$8.99
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:
  • Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
  • Durable construction – this part is made of quality materials for a long service life
  • Saves money – offers original equipment quality at a competitive price
  • Quality assured – this petcock has undergone virtual testing to assure proper fit and function
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0107)

Engine Coolant Temperature Sensor

from

$34.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Carquest Premium – Temperature Sender With Gauge and O-Ring (Part No.WTC1056)

Temperature Sender With Gauge and O-Ring

from

$12.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432628)

Radiator: With Transmission Oil Cooler

from

$179.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

Koyo Cooling – Radiator (Part No.G1000125175KCS)

Radiator

from

$162.53
Plastic Tank / Aluminum Core Radiator Koyo radiators are available in plastic tank and aluminum core. The Nocolok brazing line keeps the highest quality standards, bringing you superior products you can rely on. The Koyo Cooling radiator has been engineered to the highest standards and incorporates application specific mounting locations for all fan shrouds, inlet-outlet hoses and top-bottom mounting pins, ensuring quick and pain-free installs.

Product Features:
  • All Aluminum Core and Plastic Tank
  • OE Style mounting brackets and hose connections
  • Integrated transmission oil cooler when applicable
  • Compact and lightweight
See More

NPW – NPW Water Pump (Part No.G3000169560NPW)

NPW Water Pump

from

$47.17
The NPW water pump is a 100% new replacement and contains no remanufactured components, assuring original equipment performance, quality and fit.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • Advanced impeller design.
  • Quality cast housing.
  • Precision bearings.
  • Resistant to corrosion.
  • Unitized bearing assembly.
See More

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.82599)

Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack

from

$9.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

TYC Genera – TYC / Genera Auxiliary Fan Motor (Part No.G5006110065TYC)

TYC / Genera Auxiliary Fan Motor

from

$132.78
TYC brand Cooling Fan Motors feature premium grade ball bearings and permanent magnets to ensure longest-lasting performance under the most extreme conditions. TYC Cooling Fan Motor designs are put through a multitude of tests, like corrosion, moisture, vibration, high to low temp operation, to name to a few. At TYC/Genera, every opportunity has been taken to build a replacement part that will install, perform and last as well as the OE part it replaces.

Product Features:
  • OE Quality
  • High grade ball bearings and permanent magnets
  • Durable and Dependable
  • Thoroughly Tested
See More

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.112)

Trimline Straight Blade Electric Fan

from

$112.99
Trimline Straight Blade Electric Fan

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.114)

Trimline Straight Blade Electric Fan

from

$125.99
Trimline Straight Blade Electric Fan

NTC – Water Temperature Sender (Part No.P4036113246NTC)

Water Temperature Sender

from

$12.93
Water Temperature Sender

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1152)

Temperature Sender With Gauge

from

$8.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

1993 Infiniti G20 Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 1993 Infiniti G20. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 34 different Engine Cooling Parts in our inventory ranging from $6.19 to $162.53. That means you can find the exact parts or products you need to keep that 1993 Infiniti G20 running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1993 Infiniti G20. Permatex, Carquest Premium, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 1993 Infiniti G20, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 537 reviews in this category, some of the top rated parts include Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack with 5.0 stars and Radiator Drain Cocks with 2.3 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 1993 Infiniti G20 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 1993 Infiniti G20 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1993 Infiniti G20 demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your G20 the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Stant Engine Cooling Parts

We carry Stant parts in our stock across Radiator Caps categories, plus more. For a 1993 Infiniti G20, our most popular Stant Engine Cooling Parts include:
Radiator and Reservoir Caps
from $8.06
(1)
Radiator and Reservoir Caps
Radiator Caps

FAQs for 1993 Infiniti G20 Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 1993 Infiniti G20?

Out of 34 Engine Cooling Parts for the 1993 Infiniti G20, the most popular in our inventory are:
Radiator Cap: 13 PSI
from $11.99
(193)
Radiator Cap: 13 PSI
Radiator Caps
High Flow Thermostat: 170 Degrees
from $14.29
(16)
High Flow Thermostat: 170 Degrees
Thermostats
Radiator Cap: 13 PSI
from $18.79
(21)
Radiator Cap: 13 PSI
Radiator Caps

What are the top-rated 1993 Infiniti G20 Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 1993 Infiniti G20 based on customer reviews/ratings are:
Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack
from $9.99
(5)
Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack
“Perfect replacement cap for my antifreeze reservoir on 2007 Mazda 6. The previous cap had a tear after I twisted it too hard.”
Radiator Drain Cocks
from $8.99
(3)
Radiator Drain Cocks
“Not sure why there are 2 negative reviews, I have an rx7 which is an older mazda so maybe this works with older nissans and Mazdas but it worked perfe”
High Flow Thermostat: 180 Degrees
from $12.49
(2)
High Flow Thermostat: 180 Degrees
“It fit my 94 town car and works affordable”