1993 Chevrolet S10 Performance Transmissions

The new design of the B&M Shift Plus Electronic Shift Improver allows you to improve the transmission’s shifting performance without removing the transmission pan or valve body. A simple flip of the switch allows the transmission to operate in the performance mode. Flip it back and you are back to stock! Installs in just minutes, the Shift Plus simply recalibrates your transmission’s hydraulic system electronically for optimum performance and extended life! Select the mode that best suits your application. Reduces slippage and heat! 50 state emissions legal. The Shift Plus shift firmness not only makes driving more fun and pleasurable, but slippage and heat are reduced, extending the life of your transmission!

The B&M Transpak is the next step up from the B&M Shift Improver kit. It has all the features in the Shift Improver kit, plus it provides additional driver manual control (GM TH-400, 350, Ford C-6 and Chrysler Torqueflite only). B&M Transpak kit for 1982-1993 GM TH700R4/4L60 automatic transmissions. Most stock automatic transmissions won’t downshift into low gear above 15 mph, and automatically upshift at a predetermined speed no matter what gear you’re in. With the Transpak, you can downshift at any speed, and you can hold the transmission in first gear to any speed that you want! This is an asset when you’ve got a modified engine, and you want additional RPMs, or you’re towing a trailer or driving heavy loads downhill. Stage 1. Heavy Duty is for street rods, normal passenger vehicles or other heavy duty use. Firmer shift feel but not harsh. Improves transmission performance and life dramatically without loss of comfort and offers normal automatic operation when in Drive. Stage 2 is for Hi-Performance street use. Essentially the same as Heavy Duty mode except shifts are much quicker. Retains full automatic features and standard shift points with selector in Drive. Note: Not for GM 4L60E electronic transmissions.

The B&M Transpak is the next step up from the B&M Shift Improver kit. It has all the features in the Shift Improver kit, plus it provides additional driver manual control (GM TH-400, 350, Ford C-6 and Chrysler Torqueflite only). B&M Transpak kit for 1965-1987 GM TH400/375 automatic transmissions. Most stock automatic transmissions won’t downshift into low gear above 15 mph, and automatically upshift at a predetermined speed no matter what gear you’re in. With the Transpak, you can downshift at any speed, and you can hold the transmission in first gear to any speed that you want! This is an asset when you’ve got a modified engine, and you want additional RPMs, or you’re towing a trailer or driving heavy loads downhill. Stage 1. Heavy Duty is for street rods, normal passenger vehicles or other heavy duty use. Firmer shift feel but not harsh. Improves transmission performance and life dramatically without loss of comfort and offers normal automatic operation when in Drive. Stage 2 is for Hi-Performance street use. Essentially the same as Heavy Duty mode except shifts are much quicker. Retains full automatic features and standard shift points with selector in Drive.

These universal fit adjustable cables will work in 95% of all listed transmission applications, yet are less expensive than OE models. Use as straight replacement cable or ease the installation of transmission swaps.

Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.

A true performance application component for cars, trucks, hot rods. For racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

A true performance application component for cars, trucks, hot rods. For racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Composed of lightweight cast aluminum, TSP’s retro-fit oil pan is designed to allow for increased clearance to the ground and chassis. It will fit many GM rear-wheel drive applications originally equipped with a small or big block Chevy engine and factory rear sump pan. Meticulously designed, it will mount perfectly to any wet-sump LS engine and take the stock oil filter.

Composed of lightweight cast aluminum, TSP’s retro-fit oil pan is designed to allow for increased clearance to the ground and chassis. It will fit many GM rear-wheel drive applications originally equipped with a small or big block Chevy engine and factory rear sump pan. Meticulously designed, it will mount perfectly to any wet-sump LS engine and take the stock oil filter.