1993 Chevrolet K3500 Ignition Coil Boots

Your 1993 Chevrolet K3500 might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Ignition Coil Boots you desperately need.

We currently carry 8 Ignition Coil Boots to choose from for your 1993 Chevrolet K3500, and our inventory prices range from as little as $42.99 up to $206.99.

On top of low prices, Advance Auto Parts offers 7 different trusted brands of Ignition Coil Boots for the 1993 Chevrolet K3500. We only sell parts from trusted brands like Carquest Premium so that you can find quality parts you can count on.

Don’t take our word for it – check out customer ratings and reviews to buy with confidence. We have 62 reviews on our Ignition Coil Boots for the 1993 Chevrolet K3500 from previous customers.

Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Ignition Coil Boots stock in-person!

Ignition Coil Boots for Your 1993 Chevrolet K3500

ACDelco – Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core, 9 Wire Set (Part No.9618V)

Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core, 9 Wire Set

from

$82.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Spark Plug Wire Set (Part No.35-8109)

Spark Plug Wire Set

from

$42.99
CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding del

Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Accel – GM 5.0/5.7L Tbi Truck 95-87 (Part No.9020C)

GM 5.0/5.7L Tbi Truck 95-87

from

$206.99
ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 Ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.

Product Features:
  • Ceramic boots withstand up to 2,000░ Fahrenheit
  • Ceramic boots withstand up to 2,000° Fahrenheit
  • 8mm double silicone construction black wire rated at 600░ F rated
  • 8mm double silicone construction black wire rated at 600° F rated
  • 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
  • Universal and custom fit applications
See More

MSD Ignition – Wire Set; Super Conductor; Chevy Truck 305-350; 85-on (Part No.31419)

Wire Set; Super Conductor; Chevy Truck 305-350; 85-on

from

$154.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
  • Bolt-on Performance
See More

JBA Performance – W0830 Ignition Wires 88-95 GM 5.0/5.7L Truck Red (Part No.W0830)

W0830 Ignition Wires 88-95 GM 5.0/5.7L Truck Red

from

$113.99
JBA PowerCables ignition wires are less than half the resistance of most factory wires, which frees sparkenergy and increases performance! Get as much as 5+ hp gain with JBA PowerCables as tested by CarCraft Magazine.

Product Features:
  • JBA Performance Exhaust W0830 Ignition Wires 88-95 GM 5.0/5.7L Truck Red
  • Extra thick diameters for improved under hood appearance
See More

DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8012)

Spark Plug Wire Set: Carbon Core, 9 Wire Set

from

$54.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

ACDelco – GM Original Equipment Ignition Wire Set (Part No.F1020323265ACD)

GM Original Equipment Ignition Wire Set

from

$81.98
Built to match the original equipment in length and fit, ACDelco OES Ignition Wire Sets also offer a performance advantage over many aftermarket products.

Product Features:
  • ACDelco OES wire sets are designed to be like Original in critical areas such as cable length and diameter, terminal design and insulator position
  • Have broad coverage available for most vehicles on the road today from 1980 to present
  • Provide a high degree of Radio Frequency Interference (RFI) suppression
  • Are designed to offer fit, form and function for optimum performance
  • Kevlar reinforced fiberglass core in select sets for increased strength
  • Core sheathed in radio-static absorbent material for increased RFI suppression
  • Wire-wound, stainless steel alloy conductor for maximum spark delivery and RFI suppression on most applications
  • A layer of conductive heat-resistant latex for added durability
  • Insulating rubber-based compound inner jacket helps minimize voltage drop and enhance durability
  • Thick silicone outer jacket for excellent heat resistance
  • Limited lifetime warranty*
See More

NGK – NGK Wire Set (Part No.51178)

NGK Wire Set

from

$56.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

FAQs for 1993 Chevrolet K3500 Ignition Coil Boots

What are the most popular Ignition Coil Boots for the 1993 Chevrolet K3500?

With 7 brands you can trust, our most popular Ignition Coil Boots for the 1993 Chevrolet K3500 parts are:
Spark Plug Wire Set
from $42.99
(42)
Spark Plug Wire Set
Ignition Coil Boots
Wire Set; Super Conductor; Chevy Truck 305-350; 85-on
from $154.99
This product is not rated
Wire Set; Super Conductor; Chevy Truck 305-350; 85-on
Ignition Coil Boots

What are the best aftermarket Ignition Coil Boots for the 1993 Chevrolet K3500?

See what past customers had to say about our highest-rated Ignition Coil Boots for the 1993 Chevrolet K3500:
GM 5.0/5.7L Tbi Truck 95-87
from $206.99
(1)
GM 5.0/5.7L Tbi Truck 95-87
“By the time I got around to install and realize defective warranty was up. Very disappointed. I spent alot of money for rubber”