1993 Buick Riviera Air Flow Sensors

Essential 1993 Buick Riviera Air Flow Sensors

Autopart International Inc – MAP Sensor (Part No.C70442056072API)

MAP Sensor

from

$123.71
MAP Sensor

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1303)

Manifold Absolute Pressure Sensor (MAP)

from

$59.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

ACDelco – Manifold Absolute Pressure Sensor (Part No.213-3205)

Manifold Absolute Pressure Sensor

from

$84.99
ACDelco Professional Manifold Absolute Pressure Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: engine – mechanical. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

ACDelco – Manifold Absolute Pressure (MAP) Sensor (Part No.213-796)

Manifold Absolute Pressure (MAP) Sensor

from

$89.99
ACDelco GM Original Equipment Manifold Absolute Pressure (MAP) Sensors measure intake manifold pressure, and are GM-recommended replacements for your vehicle’s original components. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. These original equipment manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Sends signals to the engine controls for optimal engine performance
  • Designed to adjust engine performance to various altitudes
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest – Multi Purpose Relay (Part No.83C1014)

Multi Purpose Relay

from

$25.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1235)

Multi Purpose Relay

from

$10.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Air Charge Temperature Sensor Connector (Part No.PT187)

Air Charge Temperature Sensor Connector

from

$40.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
  • Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
  • Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
  • High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
  • Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C
See More

Dorman – PIGTAIL (Part No.645-158)

PIGTAIL

from

$28.99
Make better electrical repairs and accessory installations with this versatile and durable pigtail connector. It allows quick circuit disconnections for service, and is engineered for reliable performance.

Product Features:
  • Professional appearance – this electrical pigtail is designed for a clean, professional look when installed.
  • Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

ACDelco – 6-Way Female Black Multi-Purpose Pigtail (Part No.PT246)

6-Way Female Black Multi-Purpose Pigtail

from

$78.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

NTK – Multi-Purpose Temperature Sensor (Part No.EF0008)

Multi-Purpose Temperature Sensor

from

$25.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK¿s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK¿s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • Air Charge Temperature Sensors are designed to meet or exceed OE specifications in form, fit and function to ensure proper monitoring of air temperature entering the engine
  • NTK’s Engine Coolant Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper engine operating temperature.
See More

Delphi – Air Charge Temperature Sensor (Part No.TS10077)

Air Charge Temperature Sensor

from

$34.99
Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:
  • Delphi temperature sensors are built with the latest OE technology
  • Delphi temperature sensors are impervious to electrical noise and interference
  • Part is validated, tested and matched to the right vehicle application
  • Delphi temperature sensors feature a one-piece lead-frame design from sensing element tip to connector terminals to help eliminate internal connectors and failure points
See More

ACDelco – GM Original Equipment Engine Coolant Temperature Sensor (Part No.C6020206740ACD)

GM Original Equipment Engine Coolant Temperature Sensor

from

$56.25
The ACDelco GM Original Equipment Engine Coolant Temperature Sensor monitors the engine temperature, and is a GM-recommended replacement for your vehicle’s original component. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This original equipment engine coolant temperature sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Undergo the same stringent testing process as the original part
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

FAE – Engine Coolant Temperature Sensor (Part No.C6020175714FAE)

Engine Coolant Temperature Sensor

from

$22.13
The FAE Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

ACDelco – Water Temp. Sensor (Part No.C6020581131ACD)

Water Temp. Sensor

from

$58.18
Water Temp. Sensor

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1144)

Ambient Air Temperature Sensor

from

$24.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Engine Coolant Temperature Sensor (Part No.213-4396)

Engine Coolant Temperature Sensor

from

$34.99
An ACDelco Professional, premium aftermarket Engine Coolant Temperature Sensor is a high quality replacement for many vehicles on the road today. It monitors the engine temperature. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This premium aftermarket replacement engine coolant temperature sensor is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

DENSO – First Time Fit Oxygen Sensor (Part No.C5010100877ND)

First Time Fit Oxygen Sensor

from

$56.61
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:
  • SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
See More

ACDelco – GM Original Equipment Oxygen Sensor (Part No.C5010322339ACD)

GM Original Equipment Oxygen Sensor

from

$114.20
The ACDelco GM Original Equipment Oxygen (O2) Sensor is a GM-recommended replacement for your vehicle’s original component. The Oxygen (O2) Sensor is a special feedback sensor on your vehicle’s exhaust system. This sensor measures the proportion of oxygen in the exhaust gases. Using this measurement, the engine management computer can adjust the air/fuel ratio near the optimum value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. This original equipment oxygen sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. When you are looking for a match to GM Original Equipment specifications in a replacement part for your GM vehicle, trust ACDelco to get the job done.

Product Features:
  • Detect oxygen content in the exhaust gases to optimize emissions and fuel economy
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Bosch – Bosch Oxygen Sensor (Part No.C5010126269BOS)

Bosch Oxygen Sensor

from

$61.87
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style connectors and wire lengths.
  • Base ceramic probe of Zirconium and Yttrium.
  • Patented Platinum Power Grid.
See More

DENSO – First Time Fit Oxygen Sensor (Part No.C5010118198ND)

First Time Fit Oxygen Sensor

from

$71.59
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:
  • SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
See More

Bosch – Bosch Oxygen Sensor (Part No.C501033456BOS)

Bosch Oxygen Sensor

from

$35.87
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style connectors and wire lengths.
  • Base ceramic probe of Zirconium and Yttrium.
  • Patented Platinum Power Grid.
See More

NTK – NTK Oxygen Sensor (Part No.C501063030NTK)

NTK Oxygen Sensor

from

$39.79
NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Extensively Tested During Manufacture to Guarantee Quality and Reliability
  • Supplied With a Factory-Fitted OEM Connector for Easy Installation
See More

NTK – NTK Oxygen Sensor (Part No.C5010400246NTK)

NTK Oxygen Sensor

from

$70.73
NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Extensively Tested During Manufacture to Guarantee Quality and Reliability
  • Supplied With a Factory-Fitted OEM Connector for Easy Installation
See More

1993 Buick Riviera Air Flow Sensors

Maybe you’re in the middle of a full rebuild of that 1993 Buick Riviera. Maybe you just need a couple of Air Flow Sensors. Either way, Advance Auto Parts has 12 different Air Flow Sensors in our inventory ranging from $22.13 to $78.99. That means you can find the exact parts or products you need to keep that 1993 Buick Riviera running smoothly.

Air Flow Sensors are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1993 Buick Riviera. NTK, Carquest, and Delphi are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Air Flow Sensors for your 1993 Buick Riviera, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Air Flow Sensors to keep your 1993 Buick Riviera rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Air Flow Sensors Brands To Make Your 1993 Buick Riviera Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1993 Buick Riviera demands trusted brand parts and products to keep it running. Many trusted brands of Air Flow Sensors make up Advance Auto Parts’ inventory, and all are ready to help make your Riviera the best it can be. Be sure to browse some of our top Air Flow Sensors brands and parts.

Popular ACDelco Air Flow Sensors

We carry ACDelco parts in our stock across Ambient Air Temperature Sensor Connectors categories, plus more. For a 1993 Buick Riviera, our most popular ACDelco Air Flow Sensors include:
6-Way Female Black Multi-Purpose Pigtail
from $78.99
(1)
6-Way Female Black Multi-Purpose Pigtail
Ambient Air Temperature Sensor Connectors

Top 1993 Buick Riviera Air Flow Sensors from NTK

NTK products are another trusted brand when it comes to Air Flow Sensors for your 1993 Buick Riviera. Popular NTK parts include:
NTK Oxygen Sensor
from $39.79
(5)
NTK Oxygen Sensor
Air- Fuel Ratio Sensors

FAQs for 1993 Buick Riviera Air Flow Sensors

What are the most purchased Air Flow Sensors for the 1993 Buick Riviera?

Out of 12 Air Flow Sensors for the 1993 Buick Riviera, the most popular in our inventory are:
Multi-Purpose Temperature Sensor
from $25.99
This product is not rated
Multi-Purpose Temperature Sensor
Air Charge Temperature Sensors
Air Charge Temperature Sensor Connector
from $40.99
This product is not rated
Air Charge Temperature Sensor Connector
Ambient Air Temperature Sensor Connectors
Multi Purpose Relay
from $25.99
This product is not rated
Multi Purpose Relay
Mass Air Flow Sensor Relays