1993 BMW 325i Belts and Hoses

Essential Belts and Hoses for 1993 BMW 325is

Dorman – Idler/Tensioner Pulley: Specific Fit, Polyamide, 70 mm Diameter (Part No.419-657)

Idler/Tensioner Pulley: Specific Fit, Polyamide, 70 mm Diameter

from

$45.49
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:
  • Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles.
  • Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
  • Application specific – reverse engineered from the original design on certain vehicle years, makes and models
  • Trustworthy quality – backed by team of engineers and quality specialists in the United States
See More

Rein – Radiator Hose (Part No.CHR0406R)

Radiator Hose

from

$36.99
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Dorman – Automatic Belt Tensioner (Tensioner Only) (Part No.419-035)

Automatic Belt Tensioner (Tensioner Only)

from

$64.99
This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:
  • Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles
  • Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Cohline – Automatic Transmission Cooling Hose (Part No.J200076026COH)

Automatic Transmission Cooling Hose

from

$152.32
Automatic Transmission Cooling Hose

INA – Air Conditioning Belt Tensioner, w/ Pulley (Part No.R1088189120INA)

Air Conditioning Belt Tensioner, w/ Pulley

from

$106.26
Air Conditioning Belt Tensioner, w/ Pulley

Gates – Premium Molded Coolant Hose (Part No.22439)

Premium Molded Coolant Hose

from

$37.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Molded Heater Hose; EPDM Rubber, 11/16 Inch Diameter, 18 Inch Length (Part No.87996)

Molded Heater Hose; EPDM Rubber, 11/16 Inch Diameter, 18 Inch Length

from

$30.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

INA – A/C Belt Tensioner, With Pulley (Part No.R1088112893INA)

A/C Belt Tensioner, With Pulley

from

$123.36
A/C Belt Tensioner, With Pulley

Rein – Oil Cooler Hose Assembly (Part No.FHA0001)

Oil Cooler Hose Assembly

from

$49.99
Rein oil cooling hoses are manufactured with premium OE quality hose material designed to withstand the high pressure demands of automotive oil cooling systems. Rein oil cooling hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in oil cooling systems.

Product Features:
  • Manufactured with premium OE quality hose which offers maximum protection from premature failures.
  • Designed as direct-fit replacements to ensure trouble-free proper installation.
  • Complete with hardware and seals when necessary for installation to save installation time and additional costs.
  • Restores your vehicle to safe and optimal performance levels.
See More

APA/URO Parts – Oil Line (Part No.A6050242150APA)

Oil Line

from

$58.67
Oil Line

APA/URO Parts – Idle Control Valve Hose (Part No.C4031268032APA)

Idle Control Valve Hose

from

$42.93
A.P.A. URO is a supplier to many automotive manufacturers and provides OE quality European replacement parts to the aftermarket. URO Parts is a highly diversified product line including, body rubber, electrical, suspension, steering, cooling and air conditioning components. Idle control valve to air intake boot.
See More

Vaico – Idle Control Valve H (Part No.C4031267942VCO)

Idle Control Valve H

from

$38.71
Idle Control Valve H

Driveworks – Poly Rib Belt Serpentine Belt; 61.5 Long, 6 Rib Count (Part No.615K6)

Poly Rib Belt Serpentine Belt; 61.5 Long, 6 Rib Count

from

$26.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Driveworks – Poly Rib Belt Serpentine Belt; 78.54 Long, 6 Rib Count (Part No.785K6)

Poly Rib Belt Serpentine Belt; 78.54 Long, 6 Rib Count

from

$21.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

CRP – Hose Clamp (Part No.Y3063860147CRP)

Hose Clamp

from

$4.11
Hose Clamp

CRP – Clamp – Hose (Part No.4I1001694834CRP)

Clamp - Hose

from

$3.37
Clamp – Hose

Original Equipment – Booster Vacuum Hose (Part No.N4020654897OEA)

Booster Vacuum Hose

from

$38.50
Booster Vacuum Hose

Cohline – Booster Vacuum Hose (Part No.N402078390COH)

Booster Vacuum Hose

from

$34.48
Booster Vacuum Hose

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 7.09" Long, 1.50" Diameter (Part No.C72092)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 7.09" Long, 1.50" Diameter

from

$14.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Rein – Radiator Hose (Part No.CHR0016R)

Radiator Hose

from

$14.49
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Radiator Hose (Part No.CHR0462)

Radiator Hose

from

$29.99
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Radiator Hose Clamp (Part No.G2010307541RIN)

Radiator Hose Clamp

from

$2.73
Radiator Hose Clamp

Dayco – Bottom Cog V-Belt; 38 Inch Long, Exact Fit Premium Quality (Part No.15380)

Bottom Cog V-Belt; 38 Inch Long, Exact Fit Premium Quality

from

$15.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  •  Resists heat, oil and grease
See More

Bando – Precision Engineered V-Belt (Part No.W100046461BAN)

Precision Engineered V-Belt

from

$24.69
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

Bando – Precision Engineered V-Belt (Part No.W100064690BAN)

Precision Engineered V-Belt

from

$9.78
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

ContiTech – Drive V-Belt (Part No.W100031715CON)

Drive V-Belt

from

$20.29
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

ContiTech – Drive V-Belt (Part No.W1000655835CON)

Drive V-Belt

from

$16.69
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Dayco – Bottom Cog V-Belt; 32.5 Inch Long, Exact Fit Premium Quality (Part No.17325)

Bottom Cog V-Belt; 32.5 Inch Long, Exact Fit Premium Quality

from

$14.99
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  • Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  • Provides greater durability and flexibility – 35% stronger than all previous versions
  • Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Upgrade your 1993 BMW 325i with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1993 BMW 325i, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Belts and Hoses are key to keeping your 325i functioning at its best. At Advance Auto Parts, we offer a wide selection of 88 Belts and Hoses for the 1993 BMW 325i, designed to meet your needs without breaking the bank. From Belt Tensioner replacements to Heater Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1993 BMW 325i at great prices. Our Belts and Hoses inventory for this model ranges from just $2.73 to $349.42, with an average price of $46.58. Our 88 Belts and Hoses in stock come from 15 trusted brands, so you’re sure to find the right part for your 1993 BMW 325i without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1993 BMW 325i, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Litens, Driveworks, and more. Dayco Belts and Hoses start at just $18.29 and boast an impressive 5 stars average rating from customers. Litens and Driveworks also bring quality to the table, with Belts and Hoses available starting at $15.79, and at an average 5 stars rating. With 90 customer reviews and counting, our 1993 BMW 325i Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1993 BMW 325i is always ready to roll. We’re committed to providing you with everything you need to keep your 325i in top shape, all in one place. Start shopping confidently below for your 1993 BMW 325i!

Best-Selling Belt Tensioners for 1993 BMW 325is

Enhance the driving experience in your BMW with 9 quality Belt Tensioner components, starting at $49.99.

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999067A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$69.99
This Litens hydraulic actuator is manufactured by the Original Equipment (O.E.) supplier of this popular BMW tensioner component. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). Note: Both the original part removed and this replacement hydraulic actuator are made in Germany. Caution: A low quality hydraulic actuator may leak causing damage to the belt drive system. For best results always use an OE quality actuator. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Hydraulic tensioning technology
  • Installation instructions included.
  • No Tensioner or pulley Included
  • Professional Mechanics will change this tensioner in approx. 20 minutes to 1 hour.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

INA – Acc. Belt Tensioner (Part No.G60011674465INA)

Acc. Belt Tensioner

from

$185.23
The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • High quality precision spring tension assembly
  • OE specified bearing and pulley assembly
  • Durable long life performance
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999141A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$80.99
Litens was the Original Equipment (O.E.) supplier of this BMW tensioner and offers this “O.E. Exact”* part for the aftermarket. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). Note: BMW used 2 different tensioner suppliers for this application so the original part you replace may look different. However the form, fit, and function specifications are the same. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
  • Professional Mechanics will change this tensioner in approx. 20 minutes.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

INA – A/C Belt Tensioner (Part No.R108831911INA)

A/C Belt Tensioner

from

$112.67
A/C Belt Tensioner

Dorman – Automatic Belt Tensioner (Tensioner Only) (Part No.419-036)

Automatic Belt Tensioner (Tensioner Only)

from

$132.99
This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:
  • Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles.
  • Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999063A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$49.99
This Litens hydraulic actuator is manufactured by the Original Equipment (O.E.) supplier of this popular BMW tensioner component. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). Caution: A low quality hydraulic actuator may leak causing damage to the belt drive system. For best results always use an OE quality actuator. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Hydraulic tensioning technology
  • Installation instructions included.
  • No Tensioner or pulley Included
  • Professional Mechanics will change this tensioner in approx. 20 minutes to 1 hour.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

INA – Accessory Belt Tensioner Assembly (Part No.G6001283391INA)

Accessory Belt Tensioner Assembly

from

$122.64
The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • High quality precision spring tension assembly
  • OE specified bearing and pulley assembly
  • Durable long life performance
See More

INA – Accessory Belt Tensioner Shock Damper (Part No.G600031908INA)

Accessory Belt Tensioner Shock Damper

from

$101.20
The INA Accessory Belt Tensioner shock damper is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Durable long life performance.
See More

Dorman – Automatic Belt Tensioner (Tensioner Only) (Part No.419-035)

Automatic Belt Tensioner (Tensioner Only)

from

$64.99
This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:
  • Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles
  • Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Most Popular 1993 BMW 325i Heater Hoses

Customize your BMW with 7 Heater Hoses products like Heater Hoses, all priced under $116.07.

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length (Part No.80413)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length

from

$18.29
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Vaico – Heater Hose Junction (Part No.R3029340700VCO)

Heater Hose Junction

from

$34.62
Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality. Rubber Hanger and Bracket
See More

APA/URO Parts – Heater Hose (Part No.R303038777APA)

Heater Hose

from

$116.07
All APA/URO rubber coolant hoses are pre-shaped and double reinforced for extra strength and durability. Each hose is manufactured from ECD (Electro Chemical Degradation) resistant materials, which prevents electrolysis from breaking down the rubber from the inside out. All APA/URO cooling components are made to meet or exceed OE standards.

Product Features:
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 125C
See More

APA/URO Parts – APA/URO Heater Hose (Part No.R3030239893APA)

APA/URO Heater Hose

from

$56.82
All APA/URO rubber coolant hoses are pre-shaped and double reinforced for extra strength and durability. Each hose is manufactured from ECD (Electro Chemical Degradation) resistant materials, which prevents electrolysis from breaking down the rubber from the inside out. All APA/URO cooling components are made to meet or exceed OE standards.

Product Features:
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 125C
See More

Gates – Premium Molded Coolant Hose (Part No.22088)

Premium Molded Coolant Hose

from

$32.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

APA/URO – APA/URO Heater Hose (Part No.R303081908APA)

APA/URO Heater Hose

from

$15.16
All APA/URO rubber coolant hoses are pre-shaped and double reinforced for extra strength and durability. Each hose is manufactured from ECD (Electro Chemical Degradation) resistant materials, which prevents electrolysis from breaking down the rubber from the inside out. All APA/URO cooling components are made to meet or exceed OE standards.

Product Features:
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 125C
See More

APA/URO – APA/URO Heater Hose (Part No.R303081907APA)

APA/URO Heater Hose

from

$10.86
All APA/URO rubber coolant hoses are pre-shaped and double reinforced for extra strength and durability. Each hose is manufactured from ECD (Electro Chemical Degradation) resistant materials, which prevents electrolysis from breaking down the rubber from the inside out. All APA/URO cooling components are made to meet or exceed OE standards.

Product Features:
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 125C
See More

Top Picks for 1993 BMW 325i Engine Cooling Hoses

Upgrade BMW 325is with top-quality Engine Cooling Hoses parts, including 8 OEM and aftermarket selections for your 1993 model.

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.59" Diameter (Part No.C71663)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.59" Diameter

from

$30.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.59" Diameter (Part No.B71664)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.59" Diameter

from

$30.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Premium Molded Coolant Hose (Part No.22440)

Premium Molded Coolant Hose

from

$42.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Coolant Hose (Part No.21886)

Premium Molded Coolant Hose

from

$23.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Rein – Rein Radiator Hose (Part No.G200066680RIN)

Rein Radiator Hose

from

$19.03
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old “quick connect” fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Rein – Radiator Hose (Part No.CHR0016R)

Radiator Hose

from

$14.49
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Radiator Hose (Part No.CHR0014R)

Radiator Hose

from

$10.99
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Radiator Hose Clamp (Part No.G2010307541RIN)

Radiator Hose Clamp

from

$2.73
Radiator Hose Clamp

In-Demand Serpentine and V Belts for 1993 BMW 325is

Select from 23 premium Serpentine and V Belts parts for your 1993 BMW 325i, with prices ranging from $8.28 to $45.59.

Driveworks – Poly Rib Belt Serpentine Belt; 35.04 Long, 5 Rib Count (Part No.350K5)

Poly Rib Belt Serpentine Belt; 35.04 Long, 5 Rib Count

from

$15.79
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W100028019CON)

Multi Rib (Serpentine) Belt

from

$18.70
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Dayco – Poly Rib Belt Serpentine Belt; 35.04 Long, 5 Rib Count (Part No.5050350)

Poly Rib Belt Serpentine Belt; 35.04 Long, 5 Rib Count

from

$24.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 61.25 Long, 6 Rib Count (Part No.5060613)

Poly Rib Belt Serpentine Belt; 61.25 Long, 6 Rib Count

from

$36.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 61.25 Long, 6 Rib Count (Part No.613K6)

Poly Rib Belt Serpentine Belt; 61.25 Long, 6 Rib Count

from

$20.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Bando – Drive Belt (Part No.W10001529972BAN)

Drive Belt

from

$43.36
Drive Belt

Mitsuboshi – Drive Belt (Part No.W1000532668MBL)

Drive Belt

from

$30.66
The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K050350)

Micro-V« Serpentine Drive Belt

from

$23.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

ContiTech – Drive V-Belt (Part No.W1000433669CON)

Drive V-Belt

from

$27.11
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Bando – Drive Belt (Part No.W10002440667BAN)

Drive Belt

from

$45.59
Drive Belt

Gates – Micro-V« Serpentine Drive Belt (Part No.K060612)

Micro-V« Serpentine Drive Belt

from

$36.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9325)

Automotive XL« High Capacity V-Belt

from

$26.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100028019MBL)

Multi-Rib (Serpentine) Belt

from

$24.78
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Bando – Precision Engineered V-Belt (Part No.W100046461BAN)

Precision Engineered V-Belt

from

$24.69
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

ContiTech – Drive V-Belt (Part No.W100031715CON)

Drive V-Belt

from

$20.29
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Bando – Precision Engineered V-Belt (Part No.W100046454BAN)

Precision Engineered V-Belt

from

$18.20
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

ContiTech – Drive Belt (Part No.W100021546CON)

Drive Belt

from

$18.17
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

ContiTech – Drive V-Belt (Part No.W1000655835CON)

Drive V-Belt

from

$16.69
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

ContiTech – Drive V-Belt (Part No.W1000655838CON)

Drive V-Belt

from

$11.40
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Bando – Precision Engineered V-Belt (Part No.W100064690BAN)

Precision Engineered V-Belt

from

$9.78
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

Bando – Precision Engineered V-Belt (Part No.W100064682BAN)

Precision Engineered V-Belt

from

$8.59
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

Bando – Precision Engineered V-Belt (Part No.W100046042BAN)

Precision Engineered V-Belt

from

$8.56
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

Bando – Precision Engineered V-Belt (Part No.W100046453BAN)

Precision Engineered V-Belt

from

$8.28
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

Most Sold 1993 BMW 325i Fuel Hoses

Explore our best-selling BMW parts for the 1993 325i among 2 OEM and aftermarket options starting from $75.84.

CRP – Hose – Fuel (Part No.4L30010808CRP)

Hose - Fuel

from

$75.84
Hose – Fuel

CRP – Hose – Fuel (Part No.4L30010815CRP)

Hose - Fuel

from

$349.42
Hose – Fuel

Top-Rated Belts and Hoses Brands For Your 1993 BMW 325i

Shop for the best-rated brands offering Belts and Hoses and other products for your 1993 BMW 325is. Below you’ll find some of our best rated Belts and Hoses from Dayco, Litens, and Driveworks, and more. Belts and Hoses from these brands that fit a 1993 325i start at just $15.79 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 1993 BMW 325i Belts and Hoses

When it comes to maintaining or upgrading your 1993 BMW 325i, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1993 BMW 325i. With over 8 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $18.29, with an average price of just $29.69. Plus, with over 36 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length
from
$18.29
This product is not rated

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 18 Inch Length

“”

Radiator Hose
from
$20.95
This product is not rated

Radiator Hose

“”

Popular Litens 1993 BMW 325i Belts and Hoses

Litens auto parts is one of the highest quality Belts and Hose brands in the market. Any 1993 BMW 325i owner should feel confident when installing genuine Litens parts in their vehicle. To ensure the best fit and performance for your 1993 325i, Advance Auto Parts carries a full inventory of 5 Litens Belts and Hoses. Plus you will be keeping your BMW in peak condition while saving money because prices on these Litens Belts and Hoses range from $49.99 to $80.99, plus, with more than 4 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

Idler Pulley: Direct Fit, Thermoplastic, 80mm Diameter
from
$55.99
This product is not rated

Idler Pulley: Direct Fit, Thermoplastic, 80mm Diameter

“”

Accessory Drive Belt Tensioner - Original Equipment Quality
from
$49.99
This product is not rated

Accessory Drive Belt Tensioner – Original Equipment Quality

“”

Accessory Drive Belt Tensioner - Original Equipment Quality
from
$80.99
This product is not rated

Accessory Drive Belt Tensioner – Original Equipment Quality

“”

FAQs for 1993 BMW 325i Belts and Hoses

Which Belts and Hoses are best-sellers for 1993 BMW 325is?

Out of 88 Belts and Hoses that fit 1993 BMW 325is, the following parts are the top sellers:

What’s the price range for 1993 BMW 325i Belts and Hoses?

Belts and Hose prices for the 1993 BMW 325i start at $2.73 and go up to $349.42 for the most premium parts.

What’s the average price of a Belts and Hose for a 1993 BMW 325i?

The average price for Belts and Hoses for the 1993 BMW 325i is $46.58. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other BMW 325i model years?

Yes, we currently carry Belts and Hoses for 14 model years of BMW 325is between 1987 and 2006. Belts and Hoses are bought most frequently for the following model years: 2006, 2005, 2004, 2003, 2002, 2001, 1995, 1994, and 1992.

What are the cheapest Belts and Hoses for my 1993 BMW 325i?

The cheapest 1993 BMW 325i Belts and Hoses we carry in stock are:

What are the top-rated Belts and Hoses that fit the 1993 BMW 325i?

Out of 90 reviews by customers, our 1993 BMW 325i Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1993 BMW 325i and their top-rated products:

What types of Belts and Hoses do you sell for my 1993 BMW 325i?

Can I get help with 1993 BMW 325i Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Belts and Hoses and more.

What is your return policy for BMW 325i Belts and Hoses?

Advance Auto Parts keeps returns simple. For new BMW 325i Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.