1992 Suzuki Samurai Brake Parts

Essential 1992 Suzuki Samurai Brake Parts

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Carquest Standard – Brake Pads : Front, Reliable and Dependable Stopping (Part No.MKD359)

Brake Pads : Front, Reliable and Dependable Stopping

from

$23.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1057)

ABS Wheel Speed Sensor Connector

from

$17.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1251)

Multi Purpose Relay

from

$20.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Wearever – WHEEL CYLINDER (Part No.WCA37786)

WHEEL CYLINDER

from

$23.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – WHEEL CYLINDER (Part No.WCA37963)

WHEEL CYLINDER

from

$27.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B1042)

Semi Loaded Disc Brake Caliper with Bracket

from

$51.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

Wagner – Disc Brake Hardware Pin Boot Kit (Part No.H8200)

Disc Brake Hardware Pin Boot Kit

from

$13.69
This wheel disc hardware kit includes rubber components used to protect the caliper pins or bolts. Worn or cracked rubber components will allow excessive movement of guide pins or bolts.
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8217A)

Disc Brake Caliper Guide Pin Boot Kit

from

$15.29
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Prevents noise and premature wear
  • Provides longer brake life and performance
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.15720A)

Disc Brake Hardware Kit

from

$12.49
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • Helps deliver a quieter, more efficient braking system
  • Low-friction PTFE coating to reduce drag
  • Manufactured with quality materials to suppress high stress levels
See More

Carquest Wearever – Drum Brake Hardware Kit (Part No.17325)

Drum Brake Hardware Kit

from

$18.79
Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance. Industry experts agree – When brake friction materials are ready to be replaced, the hardware should also be replaced.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Contains all the necessary hardware for easy installation
  • Manufactured to restrain high tolerances with quality materials
  • Helps deliver a quieter, more efficient braking system
  • Restores brakes to like-new performance
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA123789)

Brake Hose Assembly: Copper Washers Included

from

$22.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38618)

Brake Hose Assembly: Copper Washers Included

from

$20.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Carquest Wearever – Brake Rotor Meets or Exceeds OE Design (Part No.YH141420)

Brake Rotor Meets or Exceeds OE Design

from

$59.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to prevent warping
  • Air gap eliminates brake fade and increases pad life
  • Non-Directional finish decreases break-in time
See More

ACDelco – Advantage Non Coated Brake Disc (Rotor) (Part No.N1000634710ACD)

Advantage Non Coated Brake Disc (Rotor)

from

$39.47
ACDelco Advantage brake rotors and drums feature the fit, form and function of premium aftermarket brakes at a more economical price. The ACDelco Advantage line offers dependability, performance and great value – without sacrificing important features and benefits.

Product Features:
  • No machining required – ready to be installed right out of the box
  • Rust-preventative coating
  • Mill-balanced for proper rotor function
  • Quality validated for proper metallurgy and correct brake plate thickness
  • Non-directional brake surface finish for consistent braking
  • Chamfer angle follows the OE design
See More

Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH141710)

Disc Brake Rotor Meets or Exceeds OE Design

from

$48.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2281)

Vacuum Brake Booster: Without Master Cylinder

from

$99.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2260)

Vacuum Brake Booster: Without Master Cylinder

from

$92.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Dorman – Help – Oversized Brake Caliper Bolt (Part No.13894)

Oversized Brake Caliper Bolt

from

$25.49
This disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles
  • Ideal solution – this kit provides is a reliable replacement for original hardware that has stripped
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5025)

Disc Brake Caliper Guide Pin Kit

from

$7.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Helps deliver a quieter, more efficient braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
See More

1992 Suzuki Samurai Brake Parts

You count on your 1992 Suzuki Samurai to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 21 Brake Parts ranging in price from $7.49 to $99.99, you’re sure to find everything you need for your 1992 Suzuki Samurai.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 8 different brands like Carquest, Cardone, and Dorman. 1992 Suzuki Samurai Brake Parts start as low as $7.49!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 190 extensive product reviews on 1992 Suzuki Samurai Brake Parts. Some of the top-rated Brake Parts products we carry are WHEEL CYLINDER with 3.0 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1992 Suzuki Samurai below to get started!

Top-Rated Brake Parts Brands For Your 1992 Suzuki Samurai

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1992 Suzuki Samurai running right for years to come. In our inventory you’ll find brands like Carquest, Cardone, Dorman, and even more.

Popular Cardone Brake Parts

You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 1992 Suzuki Samurai back on the road. Some of the top-rated Cardone products in these categories are:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders

Top-Rated Carquest Wearever Brake Parts


If Carquest Wearever are what you’re looking for, our inventory holds plenty. We stock Carquest Wearever brand Brake Parts for your 1992 Suzuki Samurai, and some of our most reviewed Carquest Wearever parts include:
Disc Brake Caliper Guide Pin Kit
from $7.49
(35)
Disc Brake Caliper Guide Pin Kit
Brake Caliper Bolt and Pins
Disc Brake Rotor Meets or Exceeds OE Design
from $48.99
(6)
Disc Brake Rotor Meets or Exceeds OE Design
Front Brake Rotors
Disc Brake Caliper Guide Pin Boot Kit
from $15.29
(2)
Disc Brake Caliper Guide Pin Boot Kit
Brake Caliper Guide Pin Boot Kits

FAQs for 1992 Suzuki Samurai Brake Parts

What are the most purchased Brake Parts for the 1992 Suzuki Samurai?

Out of 21 Brake Parts for the 1992 Suzuki Samurai, the most popular in our inventory are:
Oversized Brake Caliper Bolt
from $25.49
(40)
Oversized Brake Caliper Bolt
Brake Caliper Bolt and Pins
ABS Wheel Speed Sensor Connector
from $17.29
This product is not rated
ABS Wheel Speed Sensor Connector
ABS Harness Connectors
Brake Pads : Front, Reliable and Dependable Stopping
from $23.99
This product is not rated
Brake Pads : Front, Reliable and Dependable Stopping
Front Brake Pads and Shoes

What are the top-rated 1992 Suzuki Samurai Brake Parts?

Top-rated Brake Parts for your 1992 Suzuki Samurai based on customer reviews/ratings are:
WHEEL CYLINDER
from $23.99
(2)
WHEEL CYLINDER
“Installed quick and seems to work great, although I will probably rebuild the stock one and have it standing by should I need another.”