1992 Porsche 911 Brake Parts
More 1992 Porsche 911 Brake Parts Categories
If you’re looking for an original Brake Parts replacement for a 1992 Porsche 911, you can search through our selection below. You’ll also find aftermarket and OEM Brake Parts to meet your needs.
Essential 1992 Porsche 911 Brake Parts
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Original Equipment – Brake Disc (Rotor) (Part No.N1000682355OEA)
from
$500.76
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- made of special cast iron with high carbon content
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Contains the same high quality craftsmanship as the original equipment manufacturer.
- Guarantees OE quality performance, durability and fitment.
Sebro – Coated Brake Rotor (Part No.N100022426SEB)
from
$125.13
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH145463)
from
$150.99
Carquest Premium painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Premium painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Premium painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to prevent warping
- Air gap eliminates brake fade and increases pad life
- Non-Directional finish decreases break-in time
Original Equipment – Brake Disc (Rotor) (Part No.N1000682354OEA)
from
$517.52
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- made of special cast iron with high carbon content
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Contains the same high quality craftsmanship as the original equipment manufacturer.
- Guarantees OE quality performance, durability and fitment.
APA/URO Parts – APA/URO Brake Pad Shim (Part No.N1020324462APA)
from
$18.11
Platform specific rubber to metal composite material designed to solve noise and vibration problems. To effectively combat brake squeal, APA/URO utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. APA/URO brake pad shims are cut specially to suit specific vehicle models and fit perfectly with genuine pads and those made by other manufacturers.
Product Features:
See More
Product Features:
- Platform Specific Design
- Combats Brake Squeal
- OE-Style Composite Core Shim
- Effective Thermal Barrier
Original Equipment – Original Equipment Brake Pad Shim (Part No.N102029038OEA)
from
$9.26
The Original Equipment Brake Pad Shim is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part. Original Equipment Brake Pad Shims are platform specific rubber to metal composite material designed to solve noise and vibration problems. OE brake pad shims are cut specially to suit specific vehicle models and fit perfectly with genuine pads and those made by other manufacturers.
Product Features:
See More
Product Features:
- Platform Specific Design
- Combats Brake Squeal
- OE-Style Composite Core Shim
- Effective Thermal Barrier
APA/URO Parts – Brake Pad Shim (Part No.N102030197APA)
from
$9.33
Platform specific rubber to metal composite material designed to solve noise and vibration problems. To effectively combat brake squeal, APA/URO utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. APA/URO brake pad shims are cut specially to suit specific vehicle models and fit perfectly with genuine pads and those made by other manufacturers.
Product Features:
See More
Product Features:
- Platform Specific Design
- Combats Brake Squeal
- OE-Style Composite Core Shim
- Effective Thermal Barrier
APA/URO Parts – Brake Pad Shim (Part No.N1020343980APA)
from
$18.15
Brake Pad Shim
Sebro – Coated Brake Rotor (Part No.N1000407223SEB)
from
$209.36
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Carquest Wearever – Brake Rotor Meets or Exceeds OE Design (Part No.YH145089)
from
$89.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to prevent warping
- Air gap eliminates brake fade and increases pad life
- Non-Directional finish decreases break-in time
Sebro – Coated OE Replacement Brake Rotor (Part No.N100087896SEB)
from
$171.33
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Original Equipment – Brake Disc (Rotor) (Part No.N1000407189OEA)
from
$756.75
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- made of special cast iron with high carbon content
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Contains the same high quality craftsmanship as the original equipment manufacturer.
- Guarantees OE quality performance, durability and fitment.
Sebro – Coated Brake Rotor (Part No.N100026040SEB)
from
$316.77
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Sebro – Coated OE Replacement Brake Rotor (Part No.N1000439643SEB)
from
$237.75
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH145465)
from
$79.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Zimmermann – Coat-Z Sport Brake Disc (Rotor) (Part No.N1000670578ZXC)
from
$124.90
The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- Better wet braking performance by permanent expulsion of brake dust and water
- Sporty look
- Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
- Noticeable improvement in the braking power of your car
- Prevention of brake fade
- Countersinking of holes doubles up as wear indicator
- 1:1 exchange of original disc possible
- No additional adaption necessary
- Not subject to registration: general ABE certification supplied with disc
Sebro – Coated Brake Rotor (Part No.N1000272893SEB)
from
$204.62
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Elring – Oil Drain Plug Gasket (Part No.A612044453ELR)
from
$1.21
Oil Drain Plug Gasket
Popular 1992 Porsche 911 Brake Parts Categories
1992 Porsche 911 Brake Parts
You count on your 1992 Porsche 911 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 11 Brake Parts ranging in price from $1.21 to $324.30, you’re sure to find everything you need for your 1992 Porsche 911.
Brands matter. If you want to shop a specific Brake Parts brand, we stock 5 different brands like Cardone, Original Equipment, and APA/URO. 1992 Porsche 911 Brake Parts start as low as $1.21!
One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 36 extensive product reviews on 1992 Porsche 911 Brake Parts.
Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1992 Porsche 911 below to get started!
Top-Rated Brake Parts Brands For Your 1992 Porsche 911
Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1992 Porsche 911 running right for years to come. In our inventory you’ll find brands like Cardone, Original Equipment, APA/URO, and even more.
Popular Cardone Brake Parts
You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 1992 Porsche 911 back on the road. Some of the top-rated Cardone products in these categories are:
FAQs for 1992 Porsche 911 Brake Parts
What are the most purchased Brake Parts for the 1992 Porsche 911?
Out of 11 Brake Parts for the 1992 Porsche 911, the most popular in our inventory are:
