1992 Mazda B2200 Belts and Hoses

Essential Belts and Hoses for 1992 Mazda B2200s

Gates – Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (Part No.28408)

Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each)

from

$1.79
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time
  • Similar to SAE 20R3 Class D-3
  • Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications.
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/16 Inch Diameter, 7 Inch Length (Part No.86806)

Molded Heater Hose; EPDM Rubber, 5/16 Inch Diameter, 7 Inch Length

from

$10.79
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 1/4 Inch Diameter, 8 1/4 Inch Length (Part No.86500)

Molded Heater Hose; EPDM Rubber, 1/4 Inch Diameter, 8 1/4 Inch Length

from

$11.29
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dorman – Fuel Filler Neck Hose (Part No.573-082)

Fuel Filler Neck Hose

from

$30.49
Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:
  • Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles.
  • Durable construction – made of fuel-resistant materials to reduce future failure potential.
  • Regulatory compliant – built to meet emission and inspection standards
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Gates – Premium Molded Heater Hose (Part No.18703)

Premium Molded Heater Hose

from

$36.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Heater Hose (Part No.18899)

Premium Molded Heater Hose

from

$18.29
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Heater Hose (Part No.18206)

Premium Molded Heater Hose

from

$18.29
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (Sold by foot) (Part No.28411)

Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (Sold by foot)

from

$1.49
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications
  • CAUTION: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25476)

Vulco-Flex½ II Flexible Coolant Hose

from

$29.49
Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.75" Long, 1.31" Diameter (Part No.B71442)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.75" Long, 1.31" Diameter

from

$11.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25255)

Vulco-Flex½ II Flexible Coolant Hose

from

$38.49
Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Safety Stripe« Standard Straight Heater Hose (Part No.28409)

Safety Stripe« Standard Straight Heater Hose

from

$2.49
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

MacKay – MacKay Radiator Hose (Part No.G2000165991MKY)

MacKay Radiator Hose

from

$15.89
MacKay utilizes leading edge rubber technology and compounds, supported by in-house processes from rubber mixing to final product. This ensures hoses are made to the strict specifications required for the advanced motor vehicles of the 21st century. In vehicles of today, a hose has to be designed to withstand the stresses of modern, more compact but powerful engines that run hotter and at a higher pressure. Other factors include smaller engine compartments with poor heat dissipation, aggressive coolant additives, and stray (electrochemical) current that may be conducting through the cooling system. In short, the smaller but more powerful engines of today work a lot harder than the larger engines that were standard before. More heat is generated, higher burst pressures are required in cooling system components, and hoses have to be made tougher to withstand these demands. MacKay’s research and development chemists have developed new rubber formulations and manufacturing processes that ensure MacKay hoses meet the greater wear and heat demands created by modern engines. Rubber compounds used in automotive hoses today are predominantly synthetic rubber formulation. All MacKay coolant hoses are made from EPDM compounds that are highly resistant to ozone attack. Hoses made from some other rubber compounds may be subject to ozone deterioration.

Product Features:
  • Excellent resistance to high temperatures
  • Resists chemical attack (oils, fuels etc.)
  • Excellent Ozone resistance
  • Good resistance to abrasion
  • High resistance to vibration
See More

Dayco – V-Belt Idler/Tensioner Pulley; Steel, 81mm Dia., 18mm Width, Grooves (Part No.89183)

V-Belt Idler/Tensioner Pulley; Steel, 81mm Dia., 18mm Width, Grooves

from

$30.49
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$87.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.31" Diameter (Part No.B70815)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.31" Diameter

from

$17.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.50" Long, 1.50" Diameter (Part No.C70369)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.50" Long, 1.50" Diameter

from

$23.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 15.75 Inch Long, 1.5 Inch Inner Dia. (Part No.81161)

Flex Radiator Hoses; EPDM Rubber, 15.75 Inch Long, 1.5 Inch Inner Dia.

from

$19.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Gates – Vulco« Straight Coolant Hose (Part No.24020)

Vulco« Straight Coolant Hose

from

$0.99
Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.

Product Features:
  • Heat-resistant cover
  • Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom fit installations
  • Meets SAE 20R1 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Molded Heater Hose: EPDM, Direct Fit, 1.38" Inside Diameter (Part No.20776)

Molded Heater Hose: EPDM, Direct Fit, 1.38" Inside Diameter

from

$30.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25251)

Vulco-Flex½ II Flexible Coolant Hose

from

$30.49
Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

ContiTech – Drive V-Belt (Part No.W100033199CON)

Drive V-Belt

from

$18.76
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Driveworks – Automotive V-Belt (Part No.44017)

Automotive V-Belt

from

$5.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9550HD)

FleetRunner« Heavy-Duty V-Belt

from

$47.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at extremely prolonged operating temperatures
  • Heavy-duty construction resists cracking, wear, oil and heat
  • Special compound provides unmatched stability, load carrying capacity and belt life
  • Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
  • Problem solver for troubled drives
  • Engineered to save your fleet money and reduce downtime
  • Meets RMA oil and heat resistant standards and static conductivity requirements
See More

Bando – Precision Engineered V-Belt (Part No.W100046513BAN)

Precision Engineered V-Belt

from

$9.76
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

Dayco – V-Belt, Top Cog (Part No.17550)

V-Belt, Top Cog

from

$28.99
Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:
  • The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
  • Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
  • The laminated construction helps absorb greater shock loads associated with diesel engines
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Dayco – Bottom Cog V-Belt; 32.5 Inch Long, Exact Fit Premium Quality (Part No.17325)

Bottom Cog V-Belt; 32.5 Inch Long, Exact Fit Premium Quality

from

$14.99
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  • Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  • Provides greater durability and flexibility – 35% stronger than all previous versions
  • Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Upgrade your 1992 Mazda B2200 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1992 Mazda B2200, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mazda or enhancing its overall performance, Belts and Hoses are key to keeping your B2200 functioning at its best. At Advance Auto Parts, we offer a wide selection of 35 Belts and Hoses for the 1992 Mazda B2200, designed to meet your needs without breaking the bank. From Engine Cooling Hose replacements to Serpentine and V Belts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1992 Mazda B2200 at great prices. Our Belts and Hoses inventory for this model ranges from just $1.79 to $87.99, with an average price of $19.64. Our 35 Belts and Hoses in stock come from 8 trusted brands, so you’re sure to find the right part for your 1992 Mazda B2200 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 Mazda B2200, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, and more. Dayco Belts and Hoses start at just $10.79 and boast an impressive 5 stars average rating from customers. With 378 customer reviews and counting, our 1992 Mazda B2200 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1992 Mazda B2200 is always ready to roll. We’re committed to providing you with everything you need to keep your B2200 in top shape, all in one place. Start shopping confidently below for your 1992 Mazda B2200!

Best-Selling Engine Cooling Hoses for 1992 Mazda B2200s

Enhance the driving experience in your Mazda with 5 quality Engine Cooling Hose components, starting at $11.79.

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.31" Diameter (Part No.B70815)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.31" Diameter

from

$17.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 11 Inch Long, 1.25 Inch Inner Dia. (Part No.81031)

Flex Radiator Hoses; EPDM Rubber, 11 Inch Long, 1.25 Inch Inner Dia.

from

$27.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.75" Long, 1.31" Diameter (Part No.B71442)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.75" Long, 1.31" Diameter

from

$11.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25251)

Vulco-Flex½ II Flexible Coolant Hose

from

$30.49
Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Molded Heater Hose: EPDM, Direct Fit, 1.38" Inside Diameter (Part No.20776)

Molded Heater Hose: EPDM, Direct Fit, 1.38" Inside Diameter

from

$30.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Most Popular 1992 Mazda B2200 Serpentine and V Belts

Customize your Mazda with 15 Serpentine and V Belts products like Drive Belt Idler Assemblies and V-Belts, all priced under $37.49.

Dayco – Bottom Cog V-Belt; 37 Inch Long, Exact Fit Premium Quality (Part No.17370)

Bottom Cog V-Belt; 37 Inch Long, Exact Fit Premium Quality

from

$18.79
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  •  Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  •  Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Driveworks – Automotive V-Belt (Part No.32517)

Automotive V-Belt

from

$5.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Dayco – V-Belt, Top Cog, Dayco (Part No.17375)

V-Belt, Top Cog, Dayco

from

$14.29
Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:
  • The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
  • Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
  • The laminated construction helps absorb greater shock loads associated with diesel engines
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Dayco – Bottom Cog V-Belt; 32.5 Inch Long, Exact Fit Premium Quality (Part No.17325)

Bottom Cog V-Belt; 32.5 Inch Long, Exact Fit Premium Quality

from

$14.99
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  • Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  • Provides greater durability and flexibility – 35% stronger than all previous versions
  • Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Gates – Notched V-Belt: 38.12" Long, 1 Strand, Exact Fit (Part No.9375)

Notched V-Belt: 38.12" Long, 1 Strand, Exact Fit

from

$37.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Dayco – V-Belt Idler/Tensioner Pulley; Steel, 81mm Dia., 18mm Width, Grooves (Part No.89183)

V-Belt Idler/Tensioner Pulley; Steel, 81mm Dia., 18mm Width, Grooves

from

$30.49
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9325)

Automotive XL« High Capacity V-Belt

from

$26.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

ContiTech – Drive V-Belt (Part No.W100033199CON)

Drive V-Belt

from

$18.76
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Bando – Precision Engineered V-Belt (Part No.W100046454BAN)

Precision Engineered V-Belt

from

$18.20
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

ContiTech – Drive V-Belt (Part No.W100033196CON)

Drive V-Belt

from

$18.16
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

ContiTech – Drive V-Belt (Part No.W100033182CON)

Drive V-Belt

from

$14.59
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Bando – Precision Engineered V-Belt (Part No.W100064696BAN)

Precision Engineered V-Belt

from

$8.69
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

Bando – Precision Engineered V-Belt (Part No.W100046470BAN)

Precision Engineered V-Belt

from

$8.66
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

Driveworks – Automotive V-Belt, Driveworks (Part No.37017)

Automotive V-Belt, Driveworks

from

$5.19
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Driveworks – Automotive V-Belt, Driveworks (Part No.37517)

Automotive V-Belt, Driveworks

from

$4.99
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Top Picks for 1992 Mazda B2200 Radiator Hoses

Upgrade Mazda B2200s with top-quality Radiator Hoses parts, including 6 OEM and aftermarket selections for your 1992 model.

Gates – Safety Stripe« Standard Straight Heater Hose (Part No.28409)

Safety Stripe« Standard Straight Heater Hose

from

$2.49
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Gates – Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (Part No.28408)

Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each)

from

$1.79
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time
  • Similar to SAE 20R3 Class D-3
  • Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications.
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/16 Inch Diameter, 7 Inch Length (Part No.86806)

Molded Heater Hose; EPDM Rubber, 5/16 Inch Diameter, 7 Inch Length

from

$10.79
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 1/4 Inch Diameter, 8 1/4 Inch Length (Part No.86500)

Molded Heater Hose; EPDM Rubber, 1/4 Inch Diameter, 8 1/4 Inch Length

from

$11.29
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Radiator Hose (Part No.G2000165990DAY)

Radiator Hose

from

$11.35
Radiator Hose

MacKay – MacKay Radiator Hose (Part No.G2000165991MKY)

MacKay Radiator Hose

from

$15.89
MacKay utilizes leading edge rubber technology and compounds, supported by in-house processes from rubber mixing to final product. This ensures hoses are made to the strict specifications required for the advanced motor vehicles of the 21st century. In vehicles of today, a hose has to be designed to withstand the stresses of modern, more compact but powerful engines that run hotter and at a higher pressure. Other factors include smaller engine compartments with poor heat dissipation, aggressive coolant additives, and stray (electrochemical) current that may be conducting through the cooling system. In short, the smaller but more powerful engines of today work a lot harder than the larger engines that were standard before. More heat is generated, higher burst pressures are required in cooling system components, and hoses have to be made tougher to withstand these demands. MacKay’s research and development chemists have developed new rubber formulations and manufacturing processes that ensure MacKay hoses meet the greater wear and heat demands created by modern engines. Rubber compounds used in automotive hoses today are predominantly synthetic rubber formulation. All MacKay coolant hoses are made from EPDM compounds that are highly resistant to ozone attack. Hoses made from some other rubber compounds may be subject to ozone deterioration.

Product Features:
  • Excellent resistance to high temperatures
  • Resists chemical attack (oils, fuels etc.)
  • Excellent Ozone resistance
  • Good resistance to abrasion
  • High resistance to vibration
See More

In-Demand Fuel Hoses for 1992 Mazda B2200s

Select from 1 premium Fuel Hoses parts for your 1992 Mazda B2200.

Dorman – Fuel Filler Neck Hose (Part No.573-082)

Fuel Filler Neck Hose

from

$30.49
Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:
  • Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles.
  • Durable construction – made of fuel-resistant materials to reduce future failure potential.
  • Regulatory compliant – built to meet emission and inspection standards
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Most Sold 1992 Mazda B2200 Heater Hoses

Explore our best-selling Mazda parts for the 1992 B2200 among 6 OEM and aftermarket options starting from $11.79.

Dayco – Molded Heater Hose; EPDM Rubber, 1/4 Inch Diameter, 7 Inch Length (Part No.86824)

Molded Heater Hose; EPDM Rubber, 1/4 Inch Diameter, 7 Inch Length

from

$11.79
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 11 1/2 Inch Length (Part No.87713)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 11 1/2 Inch Length

from

$21.29
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC) and the ??quick connect end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 14 1/4 Inch Length (Part No.87712)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 14 1/4 Inch Length

from

$14.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Gates – Premium Molded Heater Hose (Part No.18206)

Premium Molded Heater Hose

from

$18.29
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Heater Hose (Part No.18899)

Premium Molded Heater Hose

from

$18.29
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Heater Hose (Part No.18010)

Premium Molded Heater Hose

from

$17.49
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Top-Rated Belts and Hoses Brands For Your 1992 Mazda B2200

Shop for the best-rated brands offering Belts and Hoses and other products for your 1992 Mazda B2200s. Below you’ll find some of our best rated Belts and Hoses from Dayco, and more. Belts and Hoses from these brands that fit a 1992 B2200 start at just $10.79 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 1992 Mazda B2200 Belts and Hoses

When it comes to maintaining or upgrading your 1992 Mazda B2200, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1992 Mazda B2200. With over 13 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $10.79, with an average price of just $16.68. Plus, with over 188 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

V-Belt, Top Cog, Dayco
from
$14.29
This product is not rated

V-Belt, Top Cog, Dayco

“”

Molded Heater Hose; EPDM Rubber, 5/16 Inch Diameter, 7 Inch Length
from
$10.79
This product is not rated

Molded Heater Hose; EPDM Rubber, 5/16 Inch Diameter, 7 Inch Length

“”

FAQs for 1992 Mazda B2200 Belts and Hoses

Which Belts and Hoses are best-sellers for 1992 Mazda B2200s?

Out of 35 Belts and Hoses that fit 1992 Mazda B2200s, the following parts are the top sellers:

What’s the price range for 1992 Mazda B2200 Belts and Hoses?

Belts and Hose prices for the 1992 Mazda B2200 start at $1.79 and go up to $87.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1992 Mazda B2200?

The average price for Belts and Hoses for the 1992 Mazda B2200 is $19.64. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Mazda B2200 model years?

Yes, we currently carry Belts and Hoses for 9 model years of Mazda B2200s between 1982 and 1993. Belts and Hoses are bought most frequently for the following model years: 1993, 1991, 1990, 1989, 1988, 1987, 1984, 1983, and 1982.

What are the cheapest Belts and Hoses for my 1992 Mazda B2200?

The cheapest 1992 Mazda B2200 Belts and Hoses we carry in stock are:

What are the top-rated Belts and Hoses that fit the 1992 Mazda B2200?

Out of 378 reviews by customers, our 1992 Mazda B2200 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1992 Mazda B2200 and their top-rated products:

What types of Belts and Hoses do you sell for my 1992 Mazda B2200?

Can I get help with 1992 Mazda B2200 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mazda Belts and Hoses and more.

What is your return policy for Mazda B2200 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Mazda B2200 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.