1992 Lincoln Mark VII Intake Manifold Parts
More 1992 Lincoln Mark VII Intake Manifold Parts
Find your specific 1992 Lincoln Mark VII original or aftermarket Intake Manifold Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1992 Lincoln Mark VII Intake Manifold Parts
Carquest Premium – Coolant Temperature Sensor with Thread Sealant (Part No.WTC1015)
from
$24.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1083)
from
$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 90361)
from
$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Holley – SysteMAX; Intake Manifold Gasket (Part No.108-80)
from
$48.99
Kormetal gasket used between the SysteMax II Ford 5.0 liter upper and lower manifolds.
Product Features:
See More
Product Features:
- SysteMAX II Upper/Lower Manifold
Edelbrock – Intake replacement base and upper plenum gasket for #2945 & #3887 (Part No.7232)
Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5835)
from
$37.69
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Silicone beading on both sides of each gasket
- Complete with manifold end seals and distributor gasket
- For OE replacement, high performance street, drag race and oval track use
- Creates Tight Leak proof Seal
Edelbrock – Intake Manifold Gasket for 1963-1996 Small-Block Fords (Part No.72208)
from
$165.99
Available in different sizes for many different vehicle models/years. Clean positive seal. Embossed silicone bead surrounding the port. Matched to manifolds and cylinder heads. In the early days of the automotive performance industry, you either ran what
Product Features:
See More
Product Features:
- Clean positive seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
- Fits 1963-96 289/302/351W Engines
- 10-Pack Of Gaskets
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 93334)
from
$23.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Holley – Manifold; Ford II Lower (Part No.300-75S)
from
$630.99
Utilizes late model alternator and A/C bracket mounting provisions. Has vacuum taps off Manifold runners. Uses cable bracket P/N 20-101 for GM 700R4 transmission. Extra installation hardware included.
Product Features:
See More
Product Features:
- Dual Plane Design
- Front Height 3.5 in.
- Rear Height 4.18 in.
Edelbrock – Intake Manifold for SB Ford 289-302, Three Deuce Three Bolt (Part No.5412)
from
$345.99
The Edelbrock Performer 289 Triple-Deuce #5412 intake manifold is designed for 289-302-347 small-block Fords for triple-deuce applications. This manifold offers excellent performance out-of-the-box as well as a great vintage look. Use with Edelbrock 94 #1
See More
Edelbrock – Victor 5.0 Intake Manifold Small-Block Ford (Part No.2945)
from
$779.99
For 4000 to 75000 RPM high-performance engines. For non-emission racing applications. For engines producing 400 to 540+ horsepower. With shorter larger runners for power to 7500 RPM. Base features air gap to cool runners. Accepts stock style fuel rails. Upper plenum cover is powder coated titanium grey. Includes throttle cable bracket.
Product Features:
See More
Product Features:
- For 4000 to 7500 RPM High-Performance Engines
- For Non-Emission Racing Applications
- For Engines Producing 400 to 540+ Horsepower
- With Shorter Larger Runners For Power To 7500 RPM
- Base Features Air Gap to Cool Runners
- Accepts Stock Style Fuel Rails
- Upper ; Plenum Cover Powdercoated Titanium Grey
- Includes Throttle Cable Bracket
Popular 1992 Lincoln Mark VII Intake Manifold Parts Categories
1992 Lincoln Mark VII Intake Manifold Parts
Maybe you’re in the middle of a full rebuild of that 1992 Lincoln Mark VII. Maybe you just need a couple of Intake Manifold Parts. Either way, Advance Auto Parts has 7 different Intake Manifold Parts in our inventory ranging from $19.99 to $630.99. That means you can find the exact parts or products you need to keep that 1992 Lincoln Mark VII running smoothly.
Intake Manifold Parts are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1992 Lincoln Mark VII. Carquest Premium, FELPRO, and Holley are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Intake Manifold Parts for your 1992 Lincoln Mark VII, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Intake Manifold Parts to keep your 1992 Lincoln Mark VII rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Intake Manifold Parts Brands To Make Your 1992 Lincoln Mark VII Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1992 Lincoln Mark VII demands trusted brand parts and products to keep it running. Many trusted brands of Intake Manifold Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Mark VII the best it can be. Be sure to browse some of our top Intake Manifold Parts brands and parts.
Popular Felpro Intake Manifold Parts
We carry Felpro parts in our stock across Intake Manifold Gasket Sets categories, plus more. For a 1992 Lincoln Mark VII, our most popular Felpro Intake Manifold Parts include:
FAQs for 1992 Lincoln Mark VII Intake Manifold Parts
What are the most purchased Intake Manifold Parts for the 1992 Lincoln Mark VII?
Out of 7 Intake Manifold Parts for the 1992 Lincoln Mark VII, the most popular in our inventory are:
from
$24.99
This product is not rated
Coolant Temperature Sensor with Thread Sealant
Intake Manifold Temperature Sensors
from
$19.99
This product is not rated
Air Charge Temperature Sensor
Intake Manifold Temperature Sensors
