1992 Honda Prelude Ignition Wires

More 1992 Honda Prelude Ignition Wires

Find your specific 1992 Honda Prelude original or aftermarket Ignition Wires below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1992 Honda Prelude Ignition Wires

NGK – Ignition Wire Set (Part No.F1020115896NGK)

Ignition Wire Set

from

$94.94
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.

Product Features:
  • OE-Equivalent.
  • OEM style connectors for easy Installation.
  • Superior Firing and Fuel Savings
  • Outstanding Durability and Performance
  • Excellent Noise Suppression
  • Numbered for easy cylinder identification.
  • High quality EPDM and Silicone coverings.
See More
View Product

DENSO – Spark Plug Wire Set: Aluminum Steel Core, 5 Wire Set (Part No.671-4174)

Spark Plug Wire Set: Aluminum Steel Core, 5 Wire Set

from

$68.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More
View Product

NGK – Spark Plug Wire Set (Part No.9272)

Spark Plug Wire Set

from

$68.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More
View Product

Carquest Premium – Spark Plug Wire Set: 5 Wires, Increased performance, Designed for direct fit (Part No.35-4205)

Spark Plug Wire Set: 5 Wires, Increased performance, Designed for direct fit

from

$49.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

(7 reviews)
View Product

Intermotor Red Wire – Spark Plug Wire Set (Part No.52270)

Spark Plug Wire Set

from

$39.99
Premium Intermotor brand wire sets are designed to exactly replace the original equipment set. They feature conductors that match original equipment in material and resistance characteristics. Intermotor uses only the best in high temp jacketing and OE bo

Product Features:
  • Patented Hi-Gloss Clear Coat Formulation with Hi-temp Silicone Jacket. Enhances abrasion resistance while providing greater protection against severe temperatures
  • Enhanced Wire Core Design matched to OE type – Low ohm, Ferrite mag, Wire wound, Silicone, or Metallic. Channels maximum voltage to spark plug and enhanced RFI protection for better overall performance
See More
View Product

NGK – Spark Plug Wire Set (Part No.9731)

Spark Plug Wire Set

from

$53.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More
View Product

1992 Honda Prelude Ignition Wires

Maybe you’re in the middle of a full rebuild of that 1992 Honda Prelude. Maybe you just need a couple of Ignition Wires. Either way, Advance Auto Parts has 2 different Ignition Wires in our inventory ranging from $49.99 to $68.99. That means you can find the exact parts or products you need to keep that 1992 Honda Prelude running smoothly.

Ignition Wires are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1992 Honda Prelude. Carquest Premium and DENSO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Ignition Wires for your 1992 Honda Prelude, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Ignition Wires to keep your 1992 Honda Prelude rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Ignition Wires Brands To Make Your 1992 Honda Prelude Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1992 Honda Prelude demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Wires make up Advance Auto Parts’ inventory, and all are ready to help make your Prelude the best it can be. Be sure to browse some of our top Ignition Wires brands and parts.

More Popular Parts for All Makes