1992 Honda Civic Performance and Racing Products
Find Your Specific 1992 Honda Civic Performance and Racing Products
Below you will find various in-demand Honda Performance and Racing Products, components and accessories for your 1992 Civic. Advance Auto Parts has popular Civic parts like Performance Exhaust Products, Performance Engines, Performance Distributors and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Civic model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 1992 Honda Civic Performance and Racing Products below and start saving instantly.
Popular 1992 Honda Civic Performance and Racing Products Categories
Essential Performance and Racing Products for 1992 Honda Civics
Flowmaster Inc. – 40 Series Muffler, 2in Center Inlet 2in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942040)
from
$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Accel – Honda Supertune Up Kit W/Vtec (Part No.HST1)
from
$188.99
Everything you need to Super Tune Up your Honda V Tec engine! Covers early V Tech engines. The kits includes a high performance cap and rotor. The Honda Super Coil. The 8mm 300+ wire set.
Product Features:
See More
Product Features:
- Maximize The Performance Of Your Acura/Honda
- Replace Old Parts With Fresh New Performance Parts
- Its Like Getting The Ignition Coil Free
Earls Performance Product – Brake Bleeder Screws (Part No.280022ERL)
from
$32.59
Brake Bleeder Screws
Energy Suspension – Control Arm Bushing Set (Part No.16.3111R)
from
$45.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Shock Bushing Set (Part No.16.8102G)
from
$29.99
Adds performance to any shock. Benefit from better durability over O.E.M. rubber bushings. Important to use for competition of any kind. Great for show vehicles – adds that finishing touch. Made of Energy’s Hyper-Flex performance polyurethane.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
- Gives Shock Maximum Efficiency
- Add to the Performance of Every Shock
- Gives Instant Response/Control to Suspension
Energy Suspension – Control Arm Bushing Set (Part No.16.3105R)
from
$73.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Sway Bar Bushing Set (Part No.16.5120R)
from
$29.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.16.5120G)
from
$30.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Mr. Gasket – Exhaust Gasket, Copper Seal – Fits Acura Integra 1.7L, 1.8L – 1992-2001 (Part No.7230)
from
$42.99
Mr. Gasket Copper Seal Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.
Product Features:
See More
Product Features:
- Manufactured from ¿Dead Soft¿ (solid) .043″ thick copper material
- Manufactured from ┐Dead Soft┐ (solid) .043″ thick copper material
- .051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094¿
- .051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094┐
- Provides excellent sealing and durability
- Conforms to and seals minor surface irregularities
- For high performance street, drag race, oval track and turbocharged (extreme heat) applications
- Ideal For Tow Vehicles
- Ideal For Motorhomes
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1469)
from
$22.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Not intended for use in emission controlled vehicles.
MSD Ignition – Rotor, Honda/Aura for 8292, 82921, 82922, 8293, 8296 Cap (Part No.8092)
from
$54.79
All new Rynite injected rotors for MSD’s Honda/Acura caps! These rotors feature an all new injection molded design with brass terminal for improved transfer of the high voltage.
Product Features:
See More
Product Features:
- Resist carbon tracking
- High quality material
- Max voltage transfer
- Molded from insulated material
- Fits MSD cap PN 8292/82921/82922/8293/8298
aFe POWER – Takeda Intake System (Part No.TM-1024B-R)
from
$428.99
Takeda Intake System
aFe POWER – Takeda Cold Air Intake: Gain up to 6 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.56-10008R)
from
$386.99
Large Five Layer Performance Air Filter:This 7″ tall 360-degree radial flow air filter features a 3-1/2″ flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals.
Product Features:
See More
Product Features:
- Outflows Factory Intake by 52%
- Measured Flow: 365 CFM @ 7″ H2O
- Open-Element Design Allows For Viewing of Massive Air Filter, Yet Seals When Hood is Closed to Keep Out Hot Air
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
Energy Suspension – Tie Rod Dust Boot (Part No.9.13104G)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13104R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Sway Bar Bushing Set (Part No.16.5111R)
from
$12.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.16.5130G)
from
$13.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
B & M – Manual Shifter, Precision Shifter, Acura, Honda (Part No.45047)
from
$121.99
B&M Precision aftermarket shifters; put one in your Honda Civic and find out what 50 plus years worth of engineering know-how can do for you. It features a 303 stainless steel stick and 30 percent reduction in throw for quicker more positive shifts.
Product Features:
See More
Product Features:
- Shortens Shifter Throw
- CNC Machined-303 Stainless Steel
- 6061-T6 Aluminum
- Billet 303 Stain. Steel Sticks
- Bearing Assembly In Aluminum Housing
NOS/Nitrous Oxide Systems – Import Nitrous System Dry Design (Part No.05122NOS)
from
$1130.00
Import Nitrous System Dry Design
Energy Suspension – Motor Mount Insert (Part No.16.1105G)
from
$65.99
Available for many popular sporty and performance front wheel drive vehicles. A real must to use for sport compact competition and performance uses. Helps reduce wheel hop and traction loss. Prevents damage to other vehicle components. Improves and even restores broken motor mounts. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluid oils, coolants and road contaminants.
Product Features:
See More
Product Features:
- Prevents Tearing of Original Soft Mount Material
- A Must-Use for High Performance Conditions
- Eliminates Excess Engine Movement
Energy Suspension – Motor Mount Insert (Part No.16.1106R)
from
$65.99
Available for many popular sporty and performance front wheel drive vehicles. A real must to use for sport compact competition and performance uses. Helps reduce wheel hop and traction loss. Prevents damage to other vehicle components. Improves and even restores broken motor mounts. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluid oils, coolants and road contaminants.
Product Features:
See More
Product Features:
- Prevents Tearing of Original Soft Mount Material
- A Must-Use for High Performance Conditions
- Eliminates Excess Engine Movement
Edelbrock – Intake Manifold Gasket for 1992-00 Honda D16 (Part No.15005)
from
$18.99
Product Features:
See More
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 1 Piece (Part No.1346)
from
$15.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
B & M – Fuel Accessory, Fuel Pressure Gauge (Part No.46054)
from
$72.99
The CommandFlo allows adjustment of the fuel flow rate which lets you properly tune the air fuel ratio. Ideal for use with free flow intakes and exhaust systems.
Product Features:
See More
Product Features:
- Accurate Fuel Pressure Measurement
- Prevents Lean Conditions
- White face
- Up to 100 psi
- Sold individually
Upgrade your 1992 Honda Civic with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1992 Honda Civic, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Honda or enhancing its overall performance, Performance and Racing Products are key to keeping your Civic functioning at its best. At Advance Auto Parts, we offer a wide selection of 24 Performance and Racing Products for the 1992 Honda Civic, designed to meet your needs without breaking the bank.
From
Performance Exhaust Product
replacements to
Performance Engines
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1992 Honda Civic at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $5.99 to $1,130.00, with
an average price of $69.34.
Our 24 Performance and Racing Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 1992 Honda Civic without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1992 Honda Civic is always ready to roll. We’re committed to providing you with everything you need to keep your Civic in top shape, all in one place.
Start shopping confidently below for your 1992 Honda Civic!
Best-Selling Performance Exhaust Products for 1992 Honda Civics
Enhance the driving experience in your Honda with 2 quality Performance Exhaust Product components, starting at $22.49.
Flowmaster Inc. – 40 Series Muffler, 2in Center Inlet 2in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942040)
from
$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1469)
from
$22.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Not intended for use in emission controlled vehicles.
Most Popular 1992 Honda Civic Performance Engines
Customize your Honda with 1 Performance Engines products
like Performance Engine Intake Manifold Gaskets, all
priced under $18.99.
Edelbrock – Intake Manifold Gasket for 1992-00 Honda D16 (Part No.15005)
from
$18.99
Product Features:
See More
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
Top Picks for 1992 Honda Civic Performance Distributors
Upgrade Honda Civics with top-quality Performance Distributors parts, including 2 OEM and aftermarket selections for your 1992 model.
Accel – Honda Supertune Up Kit W/Vtec (Part No.HST1)
from
$188.99
Everything you need to Super Tune Up your Honda V Tec engine! Covers early V Tech engines. The kits includes a high performance cap and rotor. The Honda Super Coil. The 8mm 300+ wire set.
Product Features:
See More
Product Features:
- Maximize The Performance Of Your Acura/Honda
- Replace Old Parts With Fresh New Performance Parts
- Its Like Getting The Ignition Coil Free
MSD Ignition – Rotor, Honda/Aura for 8292, 82921, 82922, 8293, 8296 Cap (Part No.8092)
from
$54.79
All new Rynite injected rotors for MSD’s Honda/Acura caps! These rotors feature an all new injection molded design with brass terminal for improved transfer of the high voltage.
Product Features:
See More
Product Features:
- Resist carbon tracking
- High quality material
- Max voltage transfer
- Molded from insulated material
- Fits MSD cap PN 8292/82921/82922/8293/8298
In-Demand Performance Steering Products for 1992 Honda Civics
Select from 8 premium Performance Steering Products parts for your 1992 Honda Civic, with prices ranging from $5.99 to $21.99.
Energy Suspension – End Link Bushing Set (Part No.16.8104R)
from
$21.99
Get real performance for both on the road and off. Popular performance car, truck and SUV applications. A real must for competition use – or just for that seat-of-the-pants fun. Increases vehicle stability and control as well as durability. Reduces wheel hop and traction loss. Proven for many years, by both professional and amateur racers alike. Both restores and improves better than new. Made of Energy’s Hyper-Flex performance polyurethane. Heavy duty metal components are used for increased strength, when applicable.
Product Features:
See More
Product Features:
- Easy to Install
- Increase Efficiency
- Superior Performance and Greater Longevity
- Last Much Longer Than OEM Rubber End Links
Energy Suspension – Sway Bar Bushing Set (Part No.16.5107R)
from
$12.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.16.5104G)
from
$12.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Tie Rod Dust Boot (Part No.9.13104R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Sway Bar Bushing Set (Part No.16.5105G)
from
$12.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.16.5105R)
from
$12.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.16.5117G)
from
$12.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Tie Rod Dust Boot (Part No.9.13104G)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Most Sold 1992 Honda Civic Performance Fuel Systems
Explore our best-selling Honda parts for the 1992 Civic among 1 OEM and aftermarket options starting from $72.99.
B & M – Fuel Accessory, Fuel Pressure Gauge (Part No.46054)
from
$72.99
The CommandFlo allows adjustment of the fuel flow rate which lets you properly tune the air fuel ratio. Ideal for use with free flow intakes and exhaust systems.
Product Features:
See More
Product Features:
- Accurate Fuel Pressure Measurement
- Prevents Lean Conditions
- White face
- Up to 100 psi
- Sold individually
FAQs for 1992 Honda Civic Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1992 Honda Civics?
Out of 24 Performance and Racing Products that fit 1992 Honda Civics, the following parts are the top sellers:
- End Link Bushing Set (22907375) – $21.99
- Rotor, Honda/Aura for 8292, 82921, 82922, 8293, 8296 Cap (10211560) – $54.79
- Shock Bushing Set (22907380) – $29.99
What’s the price range for 1992 Honda Civic Performance and Racing Products?
Performance and Racing Product prices for the 1992 Honda Civic start at $5.99 and go up to $1,130.00 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1992 Honda Civic?
The average price for Performance and Racing Products for the 1992 Honda Civic is $69.34. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Honda Civic model years?
What are the cheapest Performance and Racing Products for my 1992 Honda Civic?
The cheapest 1992 Honda Civic Performance and Racing Products we carry in stock are:
- Tie Rod Dust Boot (22906869) – $5.99
- Tie Rod Dust Boot (22906870) – $5.99
- Sway Bar Bushing Set (22907088) – $12.99
- Sway Bar Bushing Set (22907081) – $12.99
- Sway Bar Bushing Set (22907070) – $12.99
What types of Performance and Racing Products do you sell for my 1992 Honda Civic?
As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1992 Honda Civic:
Can I get help with 1992 Honda Civic Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Honda Performance and Racing Products and more.
What is your return policy for Honda Civic Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Honda Civic Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
