1992 Honda Civic Engine Parts

Below you will find various in-demand Honda Engine Parts, components and accessories for your 1992 Civic. Advance Auto Parts has popular Civic parts like Valve Cover and Cylinder Heads, Camshafts, Engine Mounts and more. You’ll also find aftermarket and OEM Engine Parts for other Civic model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 1992 Honda Civic Engine Parts below and start saving instantly.

Popular 1992 Honda Civic Engine Parts Categories

Engine Timing Belt Kit With Water Pumps

Engine Variable Timing Solenoids

Valve Cover Gaskets

Oil Pumps

Oil Pan Gaskets

OE Engine Oil Coolers

Rear Main Seal Sets

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Engine Mounts

Oil Pans

Engine Timing Belt Kit without Water Pumps

Cylinder Head Gaskets

Crankshaft Seals

Timing Belts

Oil Caps

Camshaft Position Sensor Connectors

Engine Computers

O-Rings

Main Bearing Repair Sleeves

Engine Valve Stem Seals

Oversized Main Bearings

Standard Rod Bearing Sets

Standard Piston Rings

Remanufactured Engines

Engine Assembly Lube

Engine Oil Pump Primers

Essential Engine Parts for 1992 Honda Civics

from

$20.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$18.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$33.99

Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.

Product Features:

Engineered for the majority of domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and a tough, wear-resistant belt
Meets or exceeds OE quality

from

$40.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

from

$24.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to HONDA 76-83;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1976-1983
Weight approx: 2 Lbs

from

$41.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
STRONG AND DURABLE – Features molded rubber over a rigid carrier for durability, precise alignment and fit
SUPERIOR SEAL – Proprietary molded rubber design helps to eliminate leak paths, especially in problem corner areas
EASIER TO INSTALL – One-piece construction is easier to install than multi-piece assemblies and helps reduce potential for installation errors
INSTALLATION AID – SnapUps aid in holding the gasket in place for easy installation and allow for quick bolt tightening
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$21.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$52.99

Product Features:

PROPRIETARY NEXTGEN COATING TECHNOLOGY – Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
UNIQUE COMBUSTION SEAL – Exclusive Laser Weld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
SUPERIOR SEAL – Precise embossed sealing beads at vital areas to eliminate leak paths
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$327.99

Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
Complete assembly – includes replacement pan and drain plugs to match original components
Durable design – high-strength coating prevents future corrosion
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$55.99

For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

Product Features:

Designed as premium OEM replacement balancers for serpentine and V-belt drives
Manufactured with ductile iron casting and injection bonded dampening rubber
Engineered to offer superior bonding strength between the balancer rings

from

$102.99

This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.

Product Features:

Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications
Durable construction – this part is made from quality materials to ensure a long service life
Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance

from

$39.99

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength
Provides conformability required for older apps
Our standard material is comparable to competitors performance bearing
Note – This material offers less resistance to wear & corrosion than other materials.
Utilizes ISO & QS certified manufacturing

from

$9.99

Steel-backed aluminum alloy
Greater seizure resistance than tri-metal material
Reduces dramatically or eliminates bearing wear
Made with silicon to provide greater surface hardness
Silicon particles help polish crankshaft journal to further reduce wear during operation
Utilizes ISO & QS certified manufacturing

from

$497.99

CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100 percent computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.

Product Features:

Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
On-car vehicle validation is done to test durability and performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$111.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps – each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$312.99

Made in USA. Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

from

$208.37

WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.

Product Features:

Original equipment design and quality
Head sets give you original equipment form, fit, and function
Utilizes OE equivalent or better materials in all head sets
Packaged in shrink wrapped tray
Every part you need to complete your gasket repair in one package unless otherwise stated

from

$10.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Premium materials provide tight seal for injectors which prevents fuel leaks
High quality construction for durability
Constructed to withstand an engine environment
Application specific for this vehicle

from

$59.99

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength – provides conformability required for older applications
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$11.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Engine$aver Hardware cost-saving application
Repairs worn sealing surfaces to assure a leak free repair
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$8.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$8.99

Head sets without head gasket(s)
Requires purchase of head gasket(s) separately
Premium quality parts
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust

from

$355.99

Made In USA. Melling Engine Oil Priming Tank was developed as a way for engine builders to safely pre-prime the engine with oil prior to initial engine startup. The priming tank, when filled with clean oil and air pressure pumps oil into all of the critical areas of the new engine quickly and safely.

from

$6.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$15.49

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This specific belt is for applications with standard temperature and load requirements with a square tooth profile

from

$248.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Swirl-Cool engine oil cooler kit
Size: 1-1/2″ x 6-1/2″ x 18″
Heavy-duty applications
All except Chevrolet V8 applications
Universal Cooler, NOT a direct OE replacement. User to determine fitment prior to installation
Heavy duty applications
All except Chevrolet V8 applications
Universal Cooler, NOT a direct OE replacement. User to determine fitment prior to installation
Heavy duty applications
All except Chevrolet V8 applications

from

$26.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$8.99

VVT gaskets warped or cracked? These engine variable valve timing solenoid gaskets are designed to match the fit and function of the original gaskets on specified vehicles.

Product Features:

Direct replacement – these VVT solenoid gaskets are designed to match the fit and function of the original components on specified vehicles
Restores functionality – replaces warped or cracked gaskets to stop and prevent leaks
Durable construction – made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Upgrade your 1992 Honda Civic with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1992 Honda Civic, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Honda or enhancing its overall performance, Engine Parts are key to keeping your Civic functioning at its best. At Advance Auto Parts, we offer a wide selection of 83 Engine Parts for the 1992 Honda Civic, designed to meet your needs without breaking the bank. From Valve Cover and Cylinder Head replacements to Camshafts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1992 Honda Civic at great prices. Our Engine Parts inventory for this model ranges from just $3.29 to $2,165.99, with an average price of $109.27. Our 83 Engine Parts in stock come from 15 trusted brands, so you’re sure to find the right part for your 1992 Honda Civic without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 Honda Civic, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, Imperial, Anchor, and more. FELPRO Engine Parts start at just $42.99 and boast an impressive 4.6 stars average rating from customers. Imperial and Anchor also bring quality to the table, with Engine Parts available starting at $15.99, and at an average 4.1 stars rating. With 788 customer reviews and counting, our 1992 Honda Civic Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1992 Honda Civic is always ready to roll. We’re committed to providing you with everything you need to keep your Civic in top shape, all in one place. Start shopping confidently below for your 1992 Honda Civic!

Best-Selling Valve Cover and Cylinder Heads for 1992 Honda Civics

Enhance the driving experience in your Honda with 6 quality Valve Cover and Cylinder Head components, starting at $12.99.

show more show less

from

$42.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Manufactured for the repair environment
Unsurpassed quality you can trust

from

$136.99

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$52.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$18.99

from

$12.99

from

$61.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

Most Popular 1992 Honda Civic Camshafts

Customize your Honda with 5 Camshafts products like Camshaft Seals and Camshaft Position Sensor Connectors, all priced under $20.99.

show more show less

from

$8.99

Head sets without head gasket(s)
Requires purchase of head gasket(s) separately
Premium quality parts
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust

from

$12.79

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
Thermoplastic housing withstands heat stress for enhanced durability
Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
Neodymium magnet produces max high voltage output at all speeds

from

$20.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$12.99

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -80 Deg F to 350 Deg F / -62 Deg C to 176 Deg C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$3.29

Product Features:

Brand may vary by location

Top Picks for 1992 Honda Civic Engine Mounts

Upgrade Honda Civics with top-quality Engine Mounts parts, including 5 OEM and aftermarket selections for your 1992 model.

show more show less

from

$15.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to ACURA 94-01; HONDA 92-00;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1992-2001
Weight approx: 1 Lbs

from

$23.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to ACURA 94-01; HONDA 92-01;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1992-2001
Weight approx: 1 Lbs

from

$72.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to ACURA 94-01; HONDA 92-01;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1992-2001
Weight approx: 3 Lbs

from

$32.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to HONDA 92-97;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1992-1997
Weight approx: 4 Lbs

from

$61.99

Mount type is an exact match to OE (hydraulic, vacuum, active, etc.)
Premium materials to dampen vibration
Additional factory parts included where applicable
Designed for underhood conditions
Application specific for this vehicle

In-Demand Engine Timing Parts for 1992 Honda Civics

Select from 11 premium Engine Timing Parts parts for your 1992 Honda Civic, with prices ranging from $33.49 to $400.99.

show more show less

from

$45.99

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round tooth profile; designed to fit the timing sprockets precisely

from

$47.99

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round tooth profile; designed to fit the timing sprockets precisely

from

$69.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$106.99

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$111.99

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$33.99

Engineered for the majority of domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and a tough, wear-resistant belt
Meets or exceeds OE quality

from

$71.99

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$400.99

Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications
Durable construction – this part is made from quality materials to ensure a long service life
Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance

from

$102.99

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$65.99

ENG TMNG BELT COMPKT

from

$33.49

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round tooth profile; designed to fit the timing sprockets precisely

Most Sold 1992 Honda Civic Engine Gaskets and Seals

Explore our best-selling Honda parts for the 1992 Civic among 9 OEM and aftermarket options starting from $20.99.

show more show less

from

$42.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$52.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$27.49

Design type: spring loaded; multi-lip
Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$20.99

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$40.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$29.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$48.99

VVT gaskets warped or cracked? These engine variable valve timing solenoid gaskets are designed to match the fit and function of the original gaskets on specified vehicles.

Product Features:

Direct replacement – these VVT solenoid gaskets are designed to match the fit and function of the original components on specified vehicles
Restores functionality – replaces warped or cracked gaskets to stop and prevent leaks
Durable construction – made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$49.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$29.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

Top-Rated Engine Parts Brands For Your 1992 Honda Civic

Shop for the best-rated brands offering Engine Parts and other products for your 1992 Honda Civics. Below you’ll find some of our best rated Engine Parts from FELPRO, Imperial, and Anchor, and more. Engine Parts from these brands that fit a 1992 Civic start at just $15.99 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1992 Honda Civic Engine Parts

When it comes to maintaining or upgrading your 1992 Honda Civic, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 1992 Honda Civic. With over 3 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $42.99, with an average price of just $46.32. Plus, with over 10 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $52.99

(3)

VALVE STEM SEAL SET

“Fit great on my 2010 Accord and no oil consumption issues.”

from $42.99

(4)

Engine Valve Cover Gasket Set

“It went right in, no problems. I did it myself with no issues.”

from $42.99

(3)

PermaTorque Engine Cylinder Head Gasket

“Great price if you order online and pick-up in store .highly recommended.”

Popular Imperial 1992 Honda Civic Engine Parts

Imperial auto parts is one of the highest quality Engine Part brands in the market. Any 1992 Honda Civic owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 1992 Civic, Advance Auto Parts carries a full inventory of 2 Imperial Engine Parts. Plus you will be keeping your Honda in peak condition while saving money because prices on these Imperial Engine Parts range from $122.99 to $191.99, plus, with more than 4 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $122.99

(3)

Econo-Kool® Engine Oil Cooler

“Good price perfect fit had all the parts I needed good quality”

from $191.99

(1)

Ultra-Cool Engine Oil Cooler Kit

“Purchased for a 2005 Yukon XL Denali. Exceeded expectations for an aftermarket product”

FAQs for 1992 Honda Civic Engine Parts

Which Engine Parts are best-sellers for 1992 Honda Civics?

Out of 83 Engine Parts that fit 1992 Honda Civics, the following parts are the top sellers:

Air Charge Temperature Sensor Connector (20975509) – $12.79
Engine Oil Filler Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (18481415) – $10.99
PermaTorque Engine Cylinder Head Gasket (15780559) – $52.99

What’s the price range for 1992 Honda Civic Engine Parts?

Engine Part prices for the 1992 Honda Civic start at $3.29 and go up to $2,165.99 for the most premium parts.

What’s the average price of a Engine Part for a 1992 Honda Civic?

The average price for Engine Parts for the 1992 Honda Civic is $109.27. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Honda Civic model years?

Yes, we currently carry Engine Parts for 51 model years of Honda Civics between 1973 and 2025. Engine Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Engine Parts for my 1992 Honda Civic?

The cheapest 1992 Honda Civic Engine Parts we carry in stock are:

Oil Seal (10426040) – $3.29
Crankshaft Seal (11468566) – $4.49
Crankshaft Seal (11407845) – $4.49
Stock Replacement Engine Assembly Lubricant, 4 oz. (50175373) – $6.99
Engine Camshaft Seal (5786371) – $8.99

What are the top-rated Engine Parts that fit the 1992 Honda Civic?

Out of 788 reviews by customers, our 1992 Honda Civic Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1992 Honda Civic and their top-rated products:

Engine Internals
- Engine Crankshaft Seal Kit (15780350) – $16.49
- Engine Connecting Rod Bearing Set (3718433) – $39.99
- Multi Purpose Seal (18444883) – $15.29
Valve Cover and Cylinder Heads
- Engine Crankshaft Seal Kit (15780350) – $16.49
- Engine Connecting Rod Bearing Set (3718433) – $39.99
- Multi Purpose Seal (18444883) – $15.29
Engine Gaskets and Seals
- Engine Crankshaft Seal Kit (15780350) – $16.49
- Engine Connecting Rod Bearing Set (3718433) – $39.99
- Multi Purpose Seal (18444883) – $15.29

What types of Engine Parts do you sell for my 1992 Honda Civic?

As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 1992 Honda Civic:

Can I get help with 1992 Honda Civic Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Honda Engine Parts and more.

What is your return policy for Honda Civic Engine Parts?

Advance Auto Parts keeps returns simple. For new Honda Civic Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1992 Honda Civic Engine Parts

Carquest Premium – Multi-Use Connector (Part No.ABA3459)

Sealed Power – Engine Exhaust Valve (Part No.V-4372)

Dayco – Timing Component Kit Without Belt, Dayco (Part No.84065)

Felpro – Engine Conversion Gasket Set (Part No.CS 26529-1)

Anchor – Engine Mount: Front, Rear, Right, 1 Piece (Part No.8012)

Felpro – Engine Oil Pan Gasket Set, Oil Pan SnapUps Included (Part No.OS 30630 T)

National – Multi-Purpose Seal (Part No.228008)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26236 PT)

Dorman – Engine Oil Pan: Direct Fit, Aluminum, Center Sump, 4 Quart (Part No.264-252)

PowerBond – Premium OEM Replacement Harmonic Balancer; 166.7mm Diameter (Part No.PB1728N)

Dorman – Variable Valve Timing Solenoid (Part No.918-080)

Sealed Power – Engine Connecting Rod Bearing Set (Part No.4-1520CP)

Sealed Power – Engine Crankshaft Thrust Washer Set (Part No.1826AF)

Cardone – Remanufactured Engine Control Computer (Part No.72-2609)

Dayco – Water Pump Kit With Components And Belt, Dayco (Part No.WP224K1A)

Melling – Stock Replacement Oil Pump (Part No.M572)

Mahle – Cylinder Head Gasket Set (Part No.A8010400167MAH)

Beck/Arnley – Fuel Injector O-Ring Kit (Part No.158-0895)

Sealed Power – Engine Crankshaft Main Bearing Set (Part No.7102M)

Felpro – Shaft Repair Sleeve (Part No.16275)

National – Multi-Purpose Seal (Part No.221820)

Felpro – Engine Camshaft Seal (Part No.TCS 45620)

Melling – Engine Oil Priming Tool (Part No.MPL-201)

Melling – Stock Replacement Engine Assembly Lubricant, 4 oz. (Part No.M-10012)

Dayco – Premium Timing Belt, 35.24 Inch With 94 Square Tooth (Part No.95036)

Imperial – Engine Oil Cooler (Part No.241040)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50500 R)

Dorman – Vtec Solenoid Gasket (Part No.917-174)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9123 PT)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 9915 PT)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9915 PT)

Sealed Power – Engine Exhaust Valve (Part No.V-4372)

Sealed Power – Engine Intake Valve (Part No.V-4370)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26320 PT)

Felpro – Engine Camshaft Seal (Part No.TCS 45620)

Carquest – Air Charge Temperature Sensor Connector (Part No.28423)

Carquest Premium – Multi-Use Connector (Part No.ABA3459)

National – Multi Purpose Seal (Part No.320595)

Driveworks – Oil Seal (Part No.S-320595)

Anchor – Engine Mount: Front Left, 1 Piece (Part No.8435)

Anchor – Engine Mount: Front Right, 1 Piece (Part No.8575)

Anchor – Engine Mount: Rear, 1 Piece (Part No.8010)

Anchor – Engine Mount: Left, 1 Piece (Part No.8021)

Beck/Arnley – Engine Mount (Part No.104-1109)

Dayco – Premium Timing Belt, 39.77 Inch With 106 Round Tooth (Part No.95143)

Dayco – Premium Timing Belt, 39.02 Inch With 104 Round Tooth (Part No.95224)

Dayco – Timing Belt Kit With Components And Belt, Dayco (Part No.95224K1)

Dayco – Water Pump Kit With Components And Belt (Part No.WP143K1A)

Dayco – Water Pump Kit With Components And Belt, Dayco (Part No.WP224K1A)

Dayco – Timing Component Kit Without Belt, Dayco (Part No.84065)

Dayco – Timing Belt Kit With Components And Belt, Dayco (Part No.95143K1)

Dorman – Variable Valve Timing Solenoid (Part No.918-065)

Dayco – Water Pump Kit With Components And Belt (Part No.WP223K1A)

INA US – ENG TMNG BELT COMPKT (Part No.ZB-BK143)

Dayco – Premium Timing Belt, 38.63 Inch With 103 Round Tooth (Part No.95223)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50499 R)

Felpro – VALVE STEM SEAL SET (Part No.SS 70283-1)

National – Engine Crankshaft Seal (Part No.228015)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40430)

Felpro – VALVE COVER GASKET SET (Part No.VS 50326 R-1)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber (Part No.OS 30542 R)

Dorman – Vtec Solenoid Gasket/Filter Kit (Part No.917-172)

Felpro – Engine Conversion Gasket Set (Part No.CS 9915)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 70283)