1992 GMC C3500 Engine Parts

Name: Rollin' Thunder Camshaft for 1965-95 B/B Chevy 396-502 (Mark IV/Gen V)
Brand: Edelbrock
SKU: 2261
Price: 555.99 USD

Below you will find various in-demand GMC Engine Parts, components and accessories for your 1992 C3500. Advance Auto Parts has popular C3500 parts like Engine Timing Parts, Camshafts, Engine Gaskets and Seals and more. You’ll also find aftermarket and OEM Engine Parts for other C3500 model years including 1990, 1991, 1993, 1994, 1995, 1996, 1997, 1998, 1999 and more. Select a category of 1992 GMC C3500 Engine Parts below and start saving instantly.

Popular 1992 GMC C3500 Engine Parts Categories

Valve Covers

Engine Valve Lifters

Valve Cover Gaskets

Engine Timing Chain Kits

Turbochargers and Parts

Oil Pumps

Oil Pan Gaskets

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Timing Covers

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Timing Cam Gears

Engine Mounts

Oil Cooler Gasket Sets

Gasket Kit Sets

Oil Pans

Engine Oil Cooler Accessories

Cylinder Head Gaskets

Oil Cooler Line Connectors

Standard Piston Sets

Engine Oil Dipsticks

Engine Camshaft Bolts

Engine Oil Pump Pickup Tube and Screens

Timing Cover Repair Sleeves

Engine Woodruff Keys

Main Bearing Repair Sleeves

Power Take Off Shaft Seal

Engine Valve Stem Seals

Piston and Liners

Camshafts

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Camshaft and Lifter Kits

Oil Pump Kits

Standard Piston Rings

Freeze Plug – Block Kits

Fuel Pump Flange Gaskets

Standard Individual Rod Bearings

Oil Pump Nylon Shaft Guides

Standard Single Pistons

Oil Pump Screens

Timing Crank Gears

Expansion Plugs

Camshaft Thrust Plate and Bearings

Engine Crankshaft Lock Keys

Rocker Arm Bolts

Engine Oil Pump Cover Gaskets

Fuel Pump Gaskets

Turbocharger Mounting Gaskets

Engine Oil Pump Bushing

Engine Valve Locks

Camshaft Thrust Buttons

Engine Rocker Arm Balls

Connecting Rod Bolts and Nuts

Remanufactured Engines

Cylinder Heads

Turbocharger Cartridges

Engine Valve Spring Seat

Engine Assembly Lube

Engine Timing Cover Bolt Sets

Engine Top End Kits

Engine Oil Deep Sump Kits

Engine Oil Pump Primers

Valve Train Set Up Spring Set

Essential Engine Parts for 1992 GMC C3500s

from

$555.99

Designed for 1500-6500 performance. Maximum power in high-RPM with good low-end torque. Matched to Edelbrock performer RPM intakes. 10 to 12 inches of manifold vacuum at idle. More lift and duration than most street camshafts. Dyno matched and street proven performance. Take the guesswork out of camshaft selection! Use only stock ratio Rocker Arms.

Product Features:

Designed for 1500 to 6500 Performance
Maximum Power in High-RPM with Good Low-End Torque
Matched to Edelbrock Performer RPM Intakes
10 to 12 in. of Manifold Vacuum at Idle
More Lift and Duration than Most Street Camshafts
Dyno Matched/Street Proven Performance
Take The Guesswork Out Of Camshaft Selection
Use Only Stock Ratio Rocker Arms

from

$31.99

This is a high quality bolt set that is made of grade 8 steel and will meet your requirements for a quality bolt set, this set will work on original equipment, high performance street, drag or circle track applications.

Product Features:

These Are Have A Zinc Dichromate Finish
Tall Hex Head Bolt To Prevent Slippage
Extra Thick Parallel Ground Washer
Washers Provides More Accurate And Uniform Torque
Grade 8 Alloy Steel

from

$272.99

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:

High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
Rated At 180,000 Psi Tensile Strength
High Performance Head Bolts Are Stronger

from

$18.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$135.99

Product Features:

Use W/ Valve Springs Part #5762, 5795
Use W/ Locks Part #9612
1.50 in. Outside Diameter
Steel Material
Black Oxide Finish

from

$31.99

Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Manufactured from high-density cork/rubber blend gasket material
Provides excellent sealing and durability
For OE replacement, high performance street, drag race and oval track use

from

$34.99

The offset cam and crankshaft key helps increase torque and horsepower.

Product Features:

Increases Low-End Torque
Increases Mid-Range Horsepower
Reduces Low-End Torque
Increases Top-End Horsepower

from

$6.49

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$0.43

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$42.99

Product Features:

DESIGNED FOR THE TOUGHEST CONDITIONS – Engineered for hardworking vehicles that operate in severe conditions
STRONG AND DURABLE – Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
PREMIUM MATERIALS – High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$12.79

A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$131.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$12.99

Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.

from

$16.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Validated for fit, form, and function
Engineered for the sealing repair environment
Unsurpassed quality you can trust

from

$45.99

Helps improve cylinder sealing for less blow-by
Retains standard ring gaps in top groove
DUROSHIELD« skirt-coated piston
Moly-graphite coating extends engine life
Reduces friction for higher fuel economy
Prevents damage from inadequate lubrication on start-up

from

$22.99

This engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications. Level marks are clearly distinguished and properly gauged for accuracy.

Product Features:

Ideal replacement – this engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications
Ideal solution – level marks are clearly distinguished and properly gauged for accuracy
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$47.49

Melling oil pump repair kits are provided to supply the parts needed to rebuild a specific individual oil pump. Melling kits include all the required parts needed for a quality oil pump rebuild. Although Melling recommends the installation of a new oil pump, Melling oil pump repair kits are the preferred choice when a rebuilder has the desire to reuse the original oil pump casting or front timing cover.

Product Features:

Includes components needed to rebuild a worn oil pump providing an alternative to purchasing a new oil pump
Components are manufactured from high quality materials for durable wear
Components are precision engineered for optimum fit and function
Designed for long-life and worry-free performance

from

$3144.99

Each block is magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted. Five CNC machining centers are programmed to precise specifications that meet or exceed those established by the OEM for each engine block. After the engine block is bored, decked, and chamfered, each cylinder is honed with the specified OEM cross-hatch pattern. All gauging of all cylinder bores for diameter and roundness after final honing operation. Quality audits are performed to ensure that the cylinder meets specifications. All new pistons, rings and bearings are installed in every engine. One block per engine family is laid out and checked for all critical and high impact characteristics as defined in our control plans. These measurements include surface finishes, surface flatness and cylindricity in the cylinder bores. Every head is resurfaced and completely inspected for any visible damage or cracks to the casting or threaded holes. Valve seats are machined, inspected and replaced if necessary. The cam bore is air gauge checked on overhead cam engines and machined if required. All new valves, seals and lifters are used in every head. All plugs and fittings are replaced with new. All head and valve assemblies are quantified for leakage. Each connecting rod is measured against OEM specifications. The piston pin bore and bearing bore are measured with air gauges for proper dimensions. New torque to yield rod bolts and nuts are installed. Crankshafts are machined on a fully automated Ju crank CNC crank grinder. All oil galley holes are chamfered and brushed after machining. Each crank is inspected for cracks, bow and all applicable run-out specs for rod and main journals. Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure and any unusual noises. All engine assemblies quantified for oil gallery, gasket, and casting leakage in the oil passageways

Product Features:

Product Features:

REMANUFACTURING and QUALITY CHECKS – ENGINE BLOCKS: Each block is magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color.
CYLINDER HEADS: Every head is resurfaced and completely inspected for any visible damage or cracks to the casting or threaded holes. Any heads that have cracks in the combustion chamber are immediately scrapped, no weld repairs.
CONNECTING RODS: Each connecting rod is measured against OEM specifications for bend, twist, and center-to-center length before use. The piston pin bore and bearing bore are measured with air gauges for proper dimensions.
CRANKSHAFTS: Crankshafts are machined on a fully automated CNC crank grinder. This enables consistency and critical tolerances for each journal.
DYNAMIC ENGINE TESTING: Sims Testing – All engines are cold motored and checked and measured for proper torque to turn, cylinder compression, oil flow, oil pressure as well as monitored for any unusual noises inside the assembly.
Product might not be available in all states due to local laws.

from

$52.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$7.29

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Dramatically reduces or eliminates bearing wear
Made with silicon to provide greater surface hardness
Silicon particles help polish crankshaft journal to further reduce wear during operation
Utilizes ISO & QS certified manufacturing

from

$7.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$20.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$6.99

Install an ARP cam bolt kit and end your camshaft timing worries ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.

Product Features:

ARP Quality Delivers Increased Pre Load Clamping Force And Assures Positive Timing Gear Register
Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Increased Material Strength Overcomes Valve Train Harmonics And Stress
Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
Set of 3
180,000 PSI
.75″ Underhead Length

from

$10.49

Complete rocker arm assembly
1 Arm
1 Pivot
1 Arm
Utilizes ISO & QS certified manufacturing

from

$20.99

Bolts on using existing timing cover bolts. It is chrome plated steel, which makes is a better compliment to a chrome timing cover. It also has an adjustable red timing pointer. This allows for better visibility and helps you set your timing more easily. Just loosen the screw, set the pointer to the desired initial timing level, and screw it back down. Then you’ll be able to more clearly see if your timing is where you want it when checking your timing. Has markings from 16 degrees before top dead center (BTDC) to 4 degrees after top dead center (ATDC).

Product Features:

Bolts on using existing timing cover bolts
Chrome finish compliments chrome timing covers
Red adjustable pointer makes it easier to check timing
Timing marks from 16 degrees BTDC to 4 degrees ATDC

from

$188.99

Melling high performance oil pumps provide dependable performance every time in every application under the toughest RPM conditions. High volume performance upgrade for the M-77HV. 25% Increase in volume over stock pump. The housing and cover are CNC machined and phosphate coated. The lower pressure spring is included to reduce pressure if desired. Built with billet steel gears. Includes Intermediate shaft with steel guide. Every Melling high performance oil pump is individually tested for pressure and flow under actual engine operating conditions.

Product Features:

25% Higher Volume High Performance upgrade of the M-77HV
CNC machined phosphate coated cast iron housing and cover
Standard billet steel spur gears
Includes chrome moly steel intermediate drive shaft with steel guide
includes lower pressure spring; not installed
uses 3/4 inch diameter press-fit screen

from

$16.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

Upgrade your 1992 GMC C3500 with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1992 GMC C3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Engine Parts are key to keeping your C3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 506 Engine Parts for the 1992 GMC C3500, designed to meet your needs without breaking the bank. From Engine Timing Part replacements to Camshafts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1992 GMC C3500 at great prices. Our Engine Parts inventory for this model ranges from just $0.30 to $4,532.99, with an average price of $225.48. Our 506 Engine Parts in stock come from 29 trusted brands, so you’re sure to find the right part for your 1992 GMC C3500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 GMC C3500, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, Melling, Dorman, and more. FELPRO Engine Parts start at just $2.49 and boast an impressive 4.6 stars average rating from customers. Melling and Dorman also bring quality to the table, with Engine Parts available starting at $2.99, and at an average 4.3 stars rating. With 1,740 customer reviews and counting, our 1992 GMC C3500 Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1992 GMC C3500 is always ready to roll. We’re committed to providing you with everything you need to keep your C3500 in top shape, all in one place. Start shopping confidently below for your 1992 GMC C3500!

Best-Selling Engine Timing Parts for 1992 GMC C3500s

Enhance the driving experience in your GMC with 64 quality Engine Timing Part components, starting at $4.99.

show more show less

from

$18.79

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$18.99

Bolts on with existing timing cover bolts. It is chrome plated steel, which makes is a better compliment to a chrome timing cover. It also has an adjustable red timing pointer. This allows for better visibility and helps you set your timing more easily. Just loosen the screw, set the pointer to the desired initial timing level, and screw it back down. Then you’ll be able to more clearly see if your timing is where you want it when checking your timing.

Product Features:

Bolts on using existing timing cover bolts
Chrome finish compliments chrome timing covers
Red adjustable pointer makes it easier to check timing

from

$9.79

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$46.99

This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:

Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$45.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$11.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$41.99

Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$4.99

Spectre’s Timing Tab Adjustable Small Block Chevy is a universal timing tab that has an adjustable pointer for accurate readings and works with any size harmonic balancer. Featuring triple chrome plated steel construction, the timing tab fits small block Chevrolet 265-400.

Product Features:

Chrome plated
Steel construction
For any size harmonic balancer
Designed to fit Chevy small block engines

from

$36.99

Utilizes the latest in design and technology to offer complete chain sets. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Utilizes the latest in design and technology to offer complete chain sets. Refer to our online catalog for detailed application-specific information. SET INCLUDES: S390T Engine Timing Camshaft Sprocket (1 EA), S505 Engine Timing Crankshaft Sprocket (1 EA), C499 Engine Timing Chain (1 EA).

Product Features:

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$22.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$28.99

Includes timing cover seal and harmonic balancer sleeve
Solves the oil leaking around timing cover seal
Made of stainless steel
Takes up gaps caused by worn-out harmonic balancer shafts

from

$44.99

Utilizes the latest in design and technology to offer complete chain sets. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Utilizes the latest in design and technology to offer complete chain sets. Refer to our online catalog for detailed application-specific information. SET INCLUDES: 9-4149 Engine Timing Chain (1 EA), S645 Engine Timing Crankshaft Sprocket (1 EA), S634T Engine Timing Camshaft Sprocket (1 EA).

Product Features:

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$61.99

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$24.99

Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.

Product Features:

6 3¿4″ diameter
6 3┐4″ diameter
305, 350 cu. in. 1969-93
Increased Performance
Set Valve Lash At Proper Time

from

$24.99

Street Performance 3/8″ Pitch Double Roller Replacement True Roller Chain. Seamless 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Breaking Strength while Remaining Ductile for Toughness. Prestressed to Increase Fatigue Life. USA Made.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$23.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$15.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$11.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$78.99

Sprockets Are Made From High Alloy Steel, and Heat-Treated For Durability. Chain Is Pre-Stressed and Heat-Treated For Longevity. SET INCLUDES: C181 Engine Timing Chain (1 EA), S524 Engine Timing Camshaft Sprocket (1 EA), S375 Engine Timing Crankshaft Sprocket (1 EA).

Product Features:

Utilizes the latest in design and technology to offer complete chain sets
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$48.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain gears offer reliability and dependability for engine rebuilds and typical replacement jobs. Helical tooth form for quiet operation and precision machined bore for true fit. CAD designed and manufactured using premium materials to ensure optimal performance. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Refer to our online catalog for detailed application-specific information.

Product Features:

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation
Helical tooth form for quiet operation and precision machined bore for true fit
CAD designed and manufactured using premium materials to ensure optimal performance
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$40.99

Utilizes the latest in design and technology to offer complete chain sets. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Utilizes the latest in design and technology to offer complete chain sets. Refer to our online catalog for detailed application-specific information. SET INCLUDES: S392T Engine Timing Camshaft Sprocket (1 EA), S393 Engine Timing Crankshaft Sprocket (1 EA), C507 Engine Timing Chain (1 EA).

Product Features:

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$22.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

For Use With All V8 Chevy, 12 Point Head Type, Black Oxide, Chrome Moly

from

$19.99

ARP timing cover bolts are available in both polished stainless steel or black oxide finish chrome moly. You also can choose between standard hex head bolts or compact 12 point fasteners. Also available as part of ARP complete engine and accessory kits. Studs are preferred by many pro engine builders because they eliminate the chance of pinching gaskets and contribute to easier engine assembly. You will note that ARP studs feature a special bullet nose to guide the nut accurately into place. Available in black oxide finish 8740 chrome moly or polished stainless steel with hex or 12 point nuts. Alternators that come loose are a pain, so That is why ARP came up with these super tough bolts (your choice of chrome moly steel or polished stainless (ARP 300) both rated 170,000 PSI). The stainless has the added advantage of being rust and corrosion resistant.

Product Features:

Made From Black Oxide Finished 8740 Chrome Moly
Nominally Rated At 170,000 Psi Tensile Strength
Super Tough Bolts
Compact 12 Point Fasteners

from

$15.99

If you are changing your camshaft or replacing the timing set, make sure to replace this seal at the same time! Metal with Nitrile rubber seal.

Product Features:

Nitrile Rubber And High Density Cork
Will Not Shrink Or Stick

Most Popular 1992 GMC C3500 Camshafts

Customize your GMC with 93 Camshafts products like Camshaft Plugs, Engine Camshaft Bolts, and Camshaft Bearings, all priced under $1,745.99.

show more show less

from

$2.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$49.99

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Dramatically reduces or eliminates bearing wear
Made with silicon to provide greater surface hardness
Silicon particles help polish crankshaft journal to further reduce wear during operation
Utilizes ISO & QS certified manufacturing

from

$322.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$549.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$3.99

This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$49.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$72.99

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:

Steel backed micro Babbitt lining material
Used in automotive and high-performance, Babbitt is designed to deform under extreme loads with o damaging other engine parts.
Fatigue life of cam bearings are nearly doubled
Ensures dependable performance and superior service life
Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
Application-specific design for perfect fit and correct operation

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$226.99

HYDRAULIC – Xtreme Energy: Excellent response, good mid-range, noticeable idle.

Product Features:

HYDRAULIC – Xtreme Energy: Excellent response, good mid-range, noticeable idle.
262/270 Advertised Duration, 218/224 Duration @ .050″, .462″/.469″ Lift, 110 Lobe Separation
Valve spring upgrade required
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$49.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$226.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$259.99

HYDRAULIC – Xtreme Energy: Strong torque. Excellent response, heavy towing in 454 with 4.10 gear.

Product Features:

HYDRAULIC – Xtreme Energy: Strong torque. Excellent response, heavy towing in 454 with 4.10 gear.
262/270 Advertised Duration, 218/224 Duration @ .050″, .504″/.510″ Lift, 110 Lobe Separation
Valve spring upgrade required
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$30.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$14.99

Heat Treated Steel Bearing Race Material. Must Machine Cam Sprocket or Engiine Block .030″ to Ensure Proper Chain Alignment. Prevents Wear On Engine Block. Can be Used to Repair a Damaged Engine Block Thrust Surface.

Product Features:

Heat Treated Steel Bearing Race Material
Must Machine Cam Sprocket or Engine Block .030″ to Ensure Proper Chain Alignment
Prevents Wear On Engine Block
Can be Used to Repair a Damaged Engine Block Thrust Surface.

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$57.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$251.99

HYDRAULIC – Xtreme Energy: Great for street machines, largest cam for stock converter, better with 2000 stall.

Product Features:

HYDRAULIC – Xtreme Energy: Great for street machines, largest cam for stock converter, better with 2000 stall.
268/280 Advertised Duration, 224/230 Duration @ .050″, .477″/.480″ Lift, 110 Lobe Separation
Valve spring upgrade required
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$1745.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$1745.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$1546.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$1546.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$1545.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$1545.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

Top Picks for 1992 GMC C3500 Engine Gaskets and Seals

Upgrade GMC C3500s with top-quality Engine Gaskets and Seals parts, including 35 OEM and aftermarket selections for your 1992 model.

show more show less

from

$3.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$43.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$2.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$22.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$32.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$34.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$20.99

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$20.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$32.99

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$32.99

Meets or exceeds all original equipment specifications
Validated for fit, form, and function
Application specific design
Engineered and manufactured specifically for the repair environment
Quality you can trust
Every part for the repair procedure is Includes in the kit unless otherwise noted

from

$21.49

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$16.99

Specialized gasket set called R.A.C.E. or Remainder to Assemble Complete Engine
Includes rear main seal, timing cover gasket and seals and fuel pump gaskets
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$16.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$13.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$22.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$26.99

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$48.99

Manufactured from high-density cork/rubber blend gasket material
Provides excellent sealing and durability
For OE replacement, high performance street, drag race and oval track

from

$41.99

These are high quality gaskets that works well on those hard to seal applications. The low density fiber & rubber blend gasket material seals those minor head imperfections with a low clamp force. At .187 inch, the extra thickness can also offer slightly more clearance for roller rockers. Ideal for all those high performance applications where you take the valve covers off and on a lot, and sticking is a problem.brbrFits all 1965-2000 Chevy Big Blocks: 366,396,402,427,454 including GM (General Motors) Gen VI Crate Engines like the 502 and 572.

Product Features:

Manufactured from high-density cork/rubber blend gasket material
A black latex rubber coating is applied to the outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil.
For OE replacement, high performance street, drag race and oval track use.
.187″ thick for additonal valve train clearance
Handles Ex Flange Pressure
Forms Leak Proof Seal
Black Latex Coating

from

$21.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$20.29

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$223.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:

Work with .530″ guides and 11/32″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$63.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

In-Demand Engine Mounts for 1992 GMC C3500s

Select from 5 premium Engine Mounts parts for your 1992 GMC C3500, with prices ranging from $35.99 to $132.99.

show more show less

from

$35.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 87-02; GMC 87-02;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1987-2002
Weight approx: 4 Lbs
PRODUCT: MADE IN THE USA
DESIGN: CLAMSHELL
PART GROUP: 2621, 2621

from

$46.99

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:

Gains Both Performance and Longevity
Will Handle Any and All Torque
Out Lasts Rubber

from

$46.99

Gains Both Performance and Longevity
Will Handle Any and All Torque
Out Lasts Rubber

from

$132.99

Product Features:

Re-Engineered to Handle High Horsepower
Outlasts Rubber
Virtually Indestructible

from

$132.99

Product Features:

Re-Engineered to Handle High Horsepower
Outlasts Rubber
Virtually Indestructible

Most Sold 1992 GMC C3500 Valve Cover and Cylinder Heads

Explore our best-selling GMC parts for the 1992 C3500 among 64 OEM and aftermarket options starting from $0.30.

show more show less

from

$13.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$0.43

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$47.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$2.49

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$3.29

State-of-the-art manufacturing
Exceptional material quality
Exacting tolerances
Heat treated tips
Stock or mild modified replacement
Made in USA

from

$32.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$73.99

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

from

$35.99

PermaTorque head gaskets meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Requires no retorquing of the head bolts
Manufactured for the repair environment
Validated for fit, form, and function
Unsurpassed quality you can trust

from

$105.99

Chrome plated steel valve cover caps. Fits over original valve covers on 1987-1997 GM (General Motors) small block truck applications only. These caps fit OVER the top of the original equipment valve covers & the original equipment covers use the stock fill cap, breathers, PCV, grommets, and hardware.

Product Features:

Chrome plated steel construction
These Caps Fit Over Existing Factory Stock Painted Valve Covers
Fits Over Truck Center-Bolt Valve Covers
Sold as a pair
Fits Truck applications only
Stock OEM Truck Valve Covers Must Remain in Place & Reuse the Existing Hardware, Breathers, Fill Cap, PVC & Grommets

from

$117.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$21.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$8.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$11.99

Retro-fit performance
High-strength steel retainer (precisely limits plunger travel to perform at high rpm)
Eliminates frequent lash adjustments
Significant friction reduction substantially increases horsepower and fuel economy
Delivers quieter engine operation
Application-specific design for perfect fit and correct operation

from

$42.99

Product Features:

DESIGNED FOR THE TOUGHEST CONDITIONS – Engineered for hardworking vehicles that operate in severe conditions
STRONG AND DURABLE – Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
PREMIUM MATERIALS – High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$0.65

from

$8.49

Professional racing rods
1-Piece forged end rods
Hardened for guide plate compatibility
Centerless ground to guarantee concentricity
Black oxide coated for corrosion protection
Part numbers are laser etched on each pushrod for positive ID

from

$60.99

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RVs and daily drivers. High Energy Pushrods have a durable one-piece construction that meets or exceeds all OE pushrod specifications and fit perfectly with High Energy and Magnum Rocker Arms.

Product Features:

3/8″ Diameter, 8.280″ intake length (qt. 8), 9.252″ exhaust length (qt.8) for Big Block Chevy 396-454, ’65-’86
Best choice when building street rods, RVs or daily drivers
Meet or exceed all OE pushrod specifications
Mate perfectly with High Energy and Magnum Rockers
Durable one-piece construction

from

$42.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$288.99

COMP Cams Hydraulic Roller Lifters are a performance upgrade for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks. The roller wheel decreases friction and increases longevity when compared to flat tappet lifters. Hydraulic roller lifters can handle much more aggressive cam profiles than flat tappets unlocking performance potential.

Product Features:

.842″ diameter; 122g weight; 2.66″ seat height
Performance replacement for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks
Decrease friction and increase longevity when directly compared to flat tappet lifters
Accept much more aggressive cam profiles than flat tappet lifters will allow

from

$93.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$6.49

from

$479.99

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Product Features:

For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
Super Locks are recommended in all race applications

from

$4.99

Chrome plated stem
Hard coating added to surface for strength & aiding in lubrication
Note – coating added in varying thicknesses depending on application
Innovative design, using leading edge materials
Utilizes ISO & QS certified manufacturing

from

$55.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

Top-Rated Engine Parts Brands For Your 1992 GMC C3500

Shop for the best-rated brands offering Engine Parts and other products for your 1992 GMC C3500s. Below you’ll find some of our best rated Engine Parts from FELPRO, Melling, and Dorman, and more. Engine Parts from these brands that fit a 1992 C3500 start at just $2.49 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1992 GMC C3500 Engine Parts

When it comes to maintaining or upgrading your 1992 GMC C3500, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 1992 GMC C3500. With over 3 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.49, with an average price of just $16.82. Plus, with over 89 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $43.99

(49)

Engine Oil Pan Gasket Set – PermaDry molded rubber, Oil Pan SnapUps Included

“Excellent set, The plastic alignment pins helped out alot.”

from $3.99

(26)

Fuel Pump Mounting Gasket

“Needed for pump that was bought”

from $2.49

(14)

Fuel Pump Mounting Gasket

“Felpro is the best”

Popular Melling 1992 GMC C3500 Engine Parts

Melling auto parts is one of the highest quality Engine Part brands in the market. Any 1992 GMC C3500 owner should feel confident when installing genuine Melling parts in their vehicle. To ensure the best fit and performance for your 1992 C3500, Advance Auto Parts carries a full inventory of 3 Melling Engine Parts. Plus you will be keeping your GMC in peak condition while saving money because prices on these Melling Engine Parts range from $3.29 to $43.99, plus, with more than 25 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $43.99

(13)

Stock Replacement OE Type Oil Pump

“Easy to install”

from $21.99

(7)

Stock Replacement Type Oil Pump Intermediate Shaft

“After checking several sources Advance Auto hadthe best value.”

from $3.29

(5)

Stock Replacement Oil Pump Shaft Guide

“This is what I needed. The only one around in New York that I could find…….”

FAQs for 1992 GMC C3500 Engine Parts

Which Engine Parts are best-sellers for 1992 GMC C3500s?

Out of 506 Engine Parts that fit 1992 GMC C3500s, the following parts are the top sellers:

Engine Valve Lifter (5688698) – $13.99
Engine Push Rod (5687063) – $3.29
Fuel Pump Mounting Gasket (5183804) – $3.99

What’s the price range for 1992 GMC C3500 Engine Parts?

Engine Part prices for the 1992 GMC C3500 start at $0.30 and go up to $4,532.99 for the most premium parts.

What’s the average price of a Engine Part for a 1992 GMC C3500?

The average price for Engine Parts for the 1992 GMC C3500 is $225.48. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other GMC C3500 model years?

Yes, we currently carry Engine Parts for 18 model years of GMC C3500s between 1979 and 1999. Engine Parts are bought most frequently for the following model years: 1999, 1998, 1997, 1996, 1995, 1994, 1993, 1991, and 1990.

What are the cheapest Engine Parts for my 1992 GMC C3500?

The cheapest 1992 GMC C3500 Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (19694177) – $0.30
Engine Valve Spring Retainer Keeper (19694179) – $0.43
Engine Rocker Arm Ball (19694261) – $0.65
Connecting Rod Nuts, Type 2, 3/8-24 X 9/16 In., Ford (sold by each) (22148959) – $1.79
Steel Cup Expansion Plug 41.5mm, Height 0.536 (Sold by each) (16140156) – $1.79

What are the top-rated Engine Parts that fit the 1992 GMC C3500?

Out of 1,740 reviews by customers, our 1992 GMC C3500 Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1992 GMC C3500 and their top-rated products:

Valve Cover and Cylinder Heads
- CYLINDER HEAD BOLT SET (19783762) – $47.99
- Engine Valve Spring (3687899) – $2.49
- Engine Valve Spring Retainer Keeper (19694179) – $0.43
Engine Kits
- CYLINDER HEAD BOLT SET (19783762) – $47.99
- Engine Valve Spring (3687899) – $2.49
- Engine Valve Spring Retainer Keeper (19694179) – $0.43
Engine Gaskets and Seals
- CYLINDER HEAD BOLT SET (19783762) – $47.99
- Engine Valve Spring (3687899) – $2.49
- Engine Valve Spring Retainer Keeper (19694179) – $0.43

What types of Engine Parts do you sell for my 1992 GMC C3500?

As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 1992 GMC C3500:

Can I get help with 1992 GMC C3500 Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Engine Parts and more.

What is your return policy for GMC C3500 Engine Parts?

Advance Auto Parts keeps returns simple. For new GMC C3500 Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1992 GMC C3500 Engine Parts

Edelbrock – Rollin’ Thunder Camshaft for 1965-95 B/B Chevy 396-502 (Mark IV/Gen V) (Part No.2261)

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.946G)

ARP Auto Racing – For Use Wit 2003 And Earlier Gen Iii/Ls Series Smal Block, Hex Head, Chrome Moly (Part No.134-3609)

National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9731)

Mr. Gasket – Valve Cover Gasket Set (Part No.177)

Mr. Gasket – Woodruff Key (Part No.988G)

Sealed Power – Engine Exhaust Valve (Part No.V-1904)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Felpro – Severe Duty Engine Cylinder Head Gasket (Part No.501 SD)

Melling – Stock Replacement Type Oil Pump Intermediate Shaft (Part No.IS-77A)

Felpro – Engine Gasket Set (Part No.260-1635)

Melling Select Performance – Valve Train Set Up Spring (Part No.VTSS100)

Felpro – Turbocharger Mounting Gasket (Part No.61787)

Sealed Power – Engine Piston Set (Part No.H909CP)

Dorman – Help – Engine Oil Dipstick (Part No.917-302)

Melling – Stock Replacement Type Oil Pump Repair Kit (Part No.K-55)

Premium Drive Train – Long Block Engine Assembly, Includes Gasket Kit (Part No.DL35086E4)

Felpro – Engine Crankshaft Repair Sleeve Tool (Part No.16316)

Sealed Power – Engine Connecting Rod Bearing (Part No.2555A 30)

Driveworks – Oil Seal (Part No.S-9845)

National – Multi-Purpose Seal (Part No.4333N)

ARP Auto Racing – Small Block/ Big Block Chevy, 5/16" – 18 Thread Size, .75" Head L, 1/2" Socket (Part No.134-1001)

Sealed Power – Engine Rocker Arm Kit (Part No.R-1120)

Mr. Gasket – Timing Tab (Part No.4599)

Melling Select Performance – High Performance High Volume Cast Iron Oil Pump (Part No.10770)

Felpro – OIL COOLER GASKET MOUNTING SET (Part No.ES 72671)

National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)

Mr. Gasket – Timing Tab (Part No.4598)

National – Multi-Purpose Seal (Part No.3945)

Dorman – Timing Cover Kit (Part No.635-513)

National – Shaft Repair Sleeve (Part No.99174)

Felpro – Shaft Repair Sleeve (Part No.16202)

Dorman – Timing Cover with Gasket and Seal (Part No.635-505)

Spectre – Timing Tab Adj. Sb Chevy (Part No.4237)

Cloyes Gear – Engine Timing Set (Part No.C-3059K)

Cloyes Gear – Engine Timing Chain (Part No.C499)

National – Engine Harmonic Balancer Kit (Part No.5000)

Cloyes Gear – Engine Timing Set (Part No.C-3055)

Cloyes Gear – Engine Timing Chain (Part No.C181)

Mr. Gasket – Precision Timing Tape (Part No.1588)

Cloyes Performance – High Performance Timing Chain (Part No.9-147)

Cloyes Gear – Engine Timing Chain (Part No.9-4149)

MAHLE Original – Engine Timing Cover Seal (Part No.65022)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S390T)

Cloyes Gear – Engine Timing Set (Part No.C-3074)

Cloyes Gear – Engine Timing Gear (Part No.2823)

Cloyes Gear – Engine Timing Set (Part No.C-3202K)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S505)

ARP Auto Racing – For Use With All V8 Chevy, 12 Point Head Type, Black Oxide, Chrome Moly (Part No.200-1501)

Mr. Gasket – Timing Cover Seal (Part No.18)

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (Part No.362657.1)

Sealed Power – Engine Camshaft Bearing Set (Part No.1749M)

Edelbrock – Performer-Plus Camshaft Kit for 1976-95 Small Block Chevrolet (Part No.3702)

Competition Cams – Xtreme Energy 218/224 Hydraulic Roller Cam (Part No.12-422-8)

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (Part No.362566.1)

Sealed Power – Engine Camshaft Bearing Set (Part No.1235M)

Sealed Power – Camshaft Bearing Set (Part No.2100M)

Dorman – Steel Cup Expansion Plug 2-7/64 In., Height 0.310 (sold by each) (Part No.555-080)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.12-238-2)

Dorman – Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (sold by each) (Part No.555-049)

Sealed Power – Engine Camshaft Bearing Set (Part No.1404M)

Competition Cams – Xtreme Energy 206/212 Hydraulic Flat Cam (Part No.12-230-2)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.11-238-3)

Sealed Power – Engine Camshaft Bearing Set (Part No.1235M 1)

Cloyes Performance – Engine Camshaft Thrust Washer (Part No.9-203)

Dorman – Steel Cup Expansion Plug 2-3/32 In., Height 0.530 (sold by each) (Part No.555-085)

Sealed Power – Engine Camshaft Bearing Set (Part No.1496M)

Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam (Part No.12-242-2)

Competition Cams – Thumpr 227/241 Hydraulic Roller Cam K-Kit (Part No.K12-600-8)

Competition Cams – Big Mutha’ Thumpr 243/257 Hydraulic Roller Cam K-Kit (Part No.K12-602-8)

Competition Cams – Xtreme Energy 224/230 Hydraulic Roller Cam K-Kit (Part No.K11-423-8)

Competition Cams – Xtreme Energy 218/224 Hydraulic Roller Cam K-Kit (Part No.K11-422-8)

Competition Cams – Xtreme Energy 236/242 Hydraulic Roller Cam K-Kit (Part No.K11-433-8)

Competition Cams – Xtreme Energy 248/254 Hydraulic Roller Cam K-Kit (Part No.K11-444-8)

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber, Oil Pan SnapUps Included (Part No.OS 34500 R)

Felpro – Fuel Pump Mounting Gasket (Part No.5182)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72527)