1992 Dodge Dakota Engine Parts

Below you will find various in-demand Dodge Engine Parts, components and accessories for your 1992 Dakota. Advance Auto Parts has popular Dakota parts like Engine Timing Parts, Engine Gaskets and Seals, Camshafts and more. You’ll also find aftermarket and OEM Engine Parts for other Dakota model years including 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 and more. Select a category of 1992 Dodge Dakota Engine Parts below and start saving instantly.

Popular 1992 Dodge Dakota Engine Parts Categories

Engine Valve Lifters

Valve Cover Gaskets

Engine Timing Chain Kits

Oil Pumps

Oil Pan Gaskets

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Crankshaft Position Sensors

Timing Covers

Balance Shaft Chain and Kits

Harmonic Balancers

Timing Cover Gasket Sets

Timing Belt Tensioner Springs

Cylinder Head Gasket Sets

Computer Control Relays

Engine Timing Belt Idler Pulleys

Cylinder Head Gaskets

Camshaft Position Sensor Connectors

Engine Oil Pump Pickup Tube and Screens

Balance Shaft Chain Tensioners

Piston and Liners

Camshafts

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Camshaft and Lifter Kits

Oil Pump Kits

Standard Piston Rings

Timing Chains

Camshaft Seals

Balance Shaft Sprockets

Engine Valve Springs

Standard Individual Rod Bearings

Camshaft Plugs

Standard Single Pistons

Timing Crank Gears

Expansion Plugs

Fuel Pump Gaskets

Balance Shaft Chain Guides

Engine Valve Locks

Remanufactured Engines

Cylinder Heads

Engine Assembly Lube

Engine Oil Pump Sleeve

Essential Engine Parts for 1992 Dodge Dakotas

from

$75.99

The Crankshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position of then engine’s crankshaft to the ECM. The ECM then uses this information to determine fuel and spark timing or engine misfire detection. A failed sensor can result in a check engine light, failure to start, intermittent stalling, or misfire. Crankshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the crankshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$531.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$36.49

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Helps improve cylinder sealing for less blow-by
Retains standard ring gaps in top groove
DUROSHIELD« skirt-coated piston
Moly-graphite coating extends engine life
Reduces friction for higher fuel economy
Prevents damage from inadequate lubrication on start-up

from

$69.99

All components meet or exceed O.E.M. specifications in manufacturing and material. SET INCLUDES: S640 Engine Timing Crankshaft Sprocket (1 EA), S642 Engine Balance Shaft Sprocket (1 EA), 9-4191 Engine Balance Shaft Chain (1 EA), 9-5297 Engine Balance Shaft Chain Guide (1 EA), 9-5298 Engine Balance Shaft Chain Tensioner (1 EA).

Product Features:

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$21.99

Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.

Product Features:

Engineered for the majority of domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and a tough, wear-resistant belt
Meets or exceeds OE quality

from

$23.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$51.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$37.99

Helps improve cylinder sealing for less blow-by
Retains standard ring gaps in top groove
DUROSHIELD« skirt-coated piston
Moly-graphite coating extends engine life
Reduces friction for higher fuel economy
Prevents damage from inadequate lubrication on start-up

from

$23.99

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$11.99

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$11.49

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Complete rocker arm assembly
1 Arm
1 Pivot
1 Arm
Utilizes ISO & QS certified manufacturing

from

$1.49

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$9.49

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$22.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$8.99

Our uniquely designed pilot seal expansion plugs ensure a leak-proof fit.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$77.99

Made In USA. A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking and even twisting damage of the old shaft even when the part appears to be in good condition. Complete every Melling oil pump replacement with a new Melling oil pump shaft.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$14.99

We offer a comprehensive line of Engine Expansion Plug Kits to cover a range of applications. The kits include all parts necessary for a complete repair.

Product Features:

Direct replacement – the components in this engine expansion plug kit are designed to match the original plugs on specified years, makes and models
Ideal solution – this kit is a reliable replacement for original plugs that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$46.99

Helps improve cylinder sealing for less blow-by
Retains standard ring gaps in top groove
DUROSHIELD« skirt-coated piston
Moly-graphite coating extends engine life
Reduces friction for higher fuel economy
Prevents damage from inadequate lubrication on start-up

from

$62.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$492.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$977.99

ENGINE TIMING SET

from

$12.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$8.79

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Dramatically reduces or eliminates bearing wear
Made with silicon to provide greater surface hardness
Silicon particles help polish crankshaft journal to further reduce wear during operation
Utilizes ISO & QS certified manufacturing

from

$224.99

CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100 percent computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.

Product Features:

Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
On-car vehicle validation is done to test durability and performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$181.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$43.49

Product Features:

Brand may vary by location

from

$329.99

This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:

Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$6.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

Upgrade your 1992 Dodge Dakota with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1992 Dodge Dakota, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Engine Parts are key to keeping your Dakota functioning at its best. At Advance Auto Parts, we offer a wide selection of 155 Engine Parts for the 1992 Dodge Dakota, designed to meet your needs without breaking the bank. From Engine Timing Part replacements to Engine Gaskets and Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1992 Dodge Dakota at great prices. Our Engine Parts inventory for this model ranges from just $0.30 to $2,619.99, with an average price of $138.27. Our 155 Engine Parts in stock come from 19 trusted brands, so you’re sure to find the right part for your 1992 Dodge Dakota without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 Dodge Dakota, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, Sealed Power, Imperial, and more. FELPRO Engine Parts start at just $32.99 and boast an impressive 4.6 stars average rating from customers. Sealed Power and Imperial also bring quality to the table, with Engine Parts available starting at $1.49, and at an average 4.3 stars rating. With 342 customer reviews and counting, our 1992 Dodge Dakota Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1992 Dodge Dakota is always ready to roll. We’re committed to providing you with everything you need to keep your Dakota in top shape, all in one place. Start shopping confidently below for your 1992 Dodge Dakota!

Best-Selling Engine Timing Parts for 1992 Dodge Dakotas

Enhance the driving experience in your Dodge with 28 quality Engine Timing Part components, starting at $4.99.

show more show less

from

$12.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$25.99

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This specific belt is for applications with standard temperature and load requirements with a round tooth profile

from

$21.99

Engineered for the majority of domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and a tough, wear-resistant belt
Meets or exceeds OE quality

from

$4.99

Product Features:

Brand may vary by location

from

$59.99

Utilizes the latest in design and technology to offer complete chain sets. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Utilizes the latest in design and technology to offer complete chain sets. Refer to our online catalog for detailed application-specific information. SET INCLUDES: C380 Engine Timing Chain (1 EA), S721 Engine Timing Crankshaft Sprocket (1 EA), S712T Engine Timing Camshaft Sprocket (1 EA).

Product Features:

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$21.49

Design type: spring loaded; single-lip
Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$329.99

Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$27.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$5.49

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$22.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$24.99

Street Performance 3/8″ Pitch Double Roller Replacement True Roller Chain. Seamless 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Breaking Strength while Remaining Ductile for Toughness. Prestressed to Increase Fatigue Life. USA Made.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$115.99

Billet Camshaft Sprocket for Superior Street Performance. Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Crankshaft Sprocket Heat Treated for Durability. Seamless TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$60.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$12.49

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$72.99

High Performance 3/8″ Pitch Double Roller Replacement TRUE Roller Chain. 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Pre-stressed to Increase Fatigue Life.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$179.99

Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$69.99

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$54.99

With the backing of an industry-leading two year or 60,000 mile parts and labor warranty, each Dayco timing chain kit includes top-grade timing chains, precision machined crank sprockets and cam sprockets, tensioners, high-grade plastic guides, seals and VVT solenoids and cam phasers if the application calls for it.

Product Features:

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Camshaft Sprocket, Crankshaft Sprocket, Timing Chain

from

$49.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$44.99

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Camshaft Sprocket, Crankshaft Sprocket, Timing Chain

from

$36.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$23.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$20.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$19.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

Top Picks for 1992 Dodge Dakota Camshafts

Upgrade Dodge Dakotas with top-quality Camshafts parts, including 25 OEM and aftermarket selections for your 1992 model.

show more show less

from

$2.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.79

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
Thermoplastic housing withstands heat stress for enhanced durability
Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
Neodymium magnet produces max high voltage output at all speeds

from

$20.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$9.99

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$51.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$26.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$1175.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$875.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$707.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$531.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$531.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$531.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$531.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$424.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$416.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$416.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$344.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$328.99

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$297.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$297.99

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$269.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$16.29

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$3.99

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.99

This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

In-Demand Engine Mounts for 1992 Dodge Dakotas

Select from 2 premium Engine Mounts parts for your 1992 Dodge Dakota, with prices ranging from $19.99 to $27.49.

show more show less

from

$19.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to DODGE 87-96;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1987-1996
Weight approx: 3 Lbs
PART GROUP: 2652, 2652

from

$27.49

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1987-1996
Weight approx: 3 Lbs
COMPLETE MOUNT
PART GROUP: 2913, 2914

Most Sold 1992 Dodge Dakota Valve Cover and Cylinder Heads

Explore our best-selling Dodge parts for the 1992 Dakota among 17 OEM and aftermarket options starting from $0.30.

show more show less

from

$1.49

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$32.49

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$21.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$11.49

Complete rocker arm assembly
1 Arm
1 Pivot
1 Arm
Utilizes ISO & QS certified manufacturing

from

$6.49

from

$8.99

from

$143.99

The Edelbrock #7371 head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit

Product Features:

Head: 4.140″ Bore/0.048″ Thick/10.70cc Vol.
Intake: 1.18″x2.18″ Port/.060″ Thick
Exhaust: 1.50″x1.20″ Port
3/16″ Valve Cover
Multi Piece Configuration

from

$0.30

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$5.49

from

$1251.99

The Edelbrock No. 61775 Performer RPM cylinder head is designed for use with 1992 & later 5.2L (318 c.i.d.) and 1993 & later 5.9L (360 c.i.d.) Chrysler Magnum style V8 applications. The Edelbrock No. 61775 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.

from

$1214.99

Product Features:

Produces Out-of-the-Box Bolt-On Performance
Ideal Choice w/Edelbrock Air Gap Intake PN[7577]
Stock Magnum Intake/Exhaust Flange/Port Locations
Must Use Adjustable Aftermarket Rocker Arms
Not For Emission Controlled Applications
Uses 2.02 inch Intake / 1.60 inch Exhaust Valves
Requires Hardened Push Rods
For Bare Version of This Head Use PN[61769]

from

$406.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$347.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$280.99

Product Features:

Case-Hardened Tubing
Surface Hardening
Welded Ends
0.3125 in. Diameter
Use with or without Hardened Steel Guideplates

from

$146.99

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:

High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
Rated At 180,000 PSI Tensile Strength
High Performance Head Bolts Are Stronger

from

$39.99

Product Features:

DESIGNED FOR THE TOUGHEST CONDITIONS – Engineered for hardworking vehicles that operate in severe conditions
STRONG AND DURABLE – Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
PREMIUM MATERIALS – High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$10.49

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

Top-Rated Engine Parts Brands For Your 1992 Dodge Dakota

Shop for the best-rated brands offering Engine Parts and other products for your 1992 Dodge Dakotas. Below you’ll find some of our best rated Engine Parts from FELPRO, Sealed Power, and Imperial, and more. Engine Parts from these brands that fit a 1992 Dakota start at just $1.49 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1992 Dodge Dakota Engine Parts

When it comes to maintaining or upgrading your 1992 Dodge Dakota, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 1992 Dodge Dakota. With over 3 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $32.99, with an average price of just $35.32. Plus, with over 33 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $39.99

(26)

Engine Valve Cover Gasket Set

“used to redo my valve cover gaskets on my 1999 dakota 4×4. felpro is a great product.”

from $32.99

(4)

Engine Valve Cover Gasket Set

“grey”

from $32.99

(3)

Engine Crankshaft Seal Kit

“Fits perfect”

Popular Sealed Power 1992 Dodge Dakota Engine Parts

Sealed Power auto parts is one of the highest quality Engine Part brands in the market. Any 1992 Dodge Dakota owner should feel confident when installing genuine Sealed Power parts in their vehicle. To ensure the best fit and performance for your 1992 Dakota, Advance Auto Parts carries a full inventory of 3 Sealed Power Engine Parts. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Sealed Power Engine Parts range from $1.49 to $105.99, plus, with more than 7 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $21.99

(5)

Engine Valve Lifter

“Part was perfect”

from $1.49

(1)

Engine Valve Spring Retainer Keeper

“24 in a box”

from $105.99

(1)

Engine Crankshaft Main Bearing Set

“good price”

FAQs for 1992 Dodge Dakota Engine Parts

Which Engine Parts are best-sellers for 1992 Dodge Dakotas?

Out of 155 Engine Parts that fit 1992 Dodge Dakotas, the following parts are the top sellers:

Air Charge Temperature Sensor Connector (20975509) – $12.79
Engine Valve Lifter (3718840) – $21.99
Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (5701295) – $9.49

What’s the price range for 1992 Dodge Dakota Engine Parts?

Engine Part prices for the 1992 Dodge Dakota start at $0.30 and go up to $2,619.99 for the most premium parts.

What’s the average price of a Engine Part for a 1992 Dodge Dakota?

The average price for Engine Parts for the 1992 Dodge Dakota is $138.27. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Dodge Dakota model years?

Yes, we currently carry Engine Parts for 22 model years of Dodge Dakotas between 1987 and 2010. Engine Parts are bought most frequently for the following model years: 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, and 2002.

What are the cheapest Engine Parts for my 1992 Dodge Dakota?

The cheapest 1992 Dodge Dakota Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (19694177) – $0.30
Engine Valve Spring Retainer Keeper (19694163) – $1.49
Concave Steel Cup Expansion Plug 1-7/8 In., Height 1.870 In. (sold by each) (22140450) – $1.79
Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (Sold by each) (16140188) – $1.99
Fuel Pump Mounting Gasket (5782724) – $1.99

What are the top-rated Engine Parts that fit the 1992 Dodge Dakota?

Out of 342 reviews by customers, our 1992 Dodge Dakota Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1992 Dodge Dakota and their top-rated products:

Engine Gaskets and Seals
- Engine Crankshaft Seal Kit (19781371) – $32.99
- Engine Valve Cover Gasket Set (5992338) – $39.99
- Engine Oil Pan Gasket Set – PermaDry molded rubber (5991536) – $37.99
Valve Cover and Cylinder Heads
- Engine Crankshaft Seal Kit (19781371) – $32.99
- Engine Valve Cover Gasket Set (5992338) – $39.99
- Engine Oil Pan Gasket Set – PermaDry molded rubber (5991536) – $37.99

What types of Engine Parts do you sell for my 1992 Dodge Dakota?

As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 1992 Dodge Dakota:

Can I get help with 1992 Dodge Dakota Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Engine Parts and more.

What is your return policy for Dodge Dakota Engine Parts?

Advance Auto Parts keeps returns simple. For new Dodge Dakota Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1992 Dodge Dakota Engine Parts

NTK – Engine Crankshaft Position Sensor (Part No.EH0184)

Competition Cams – Xtreme Energy 230/236 Hydraulic Roller Cam (Part No.20-812-9)

Sealed Power – Engine Piston Set (Part No.H814CP 20)

Cloyes Gear – Engine Balance Shaft Chain Kit (Part No.9-4191S)

Dayco – Timing Component Kit Without Belt, Dayco (Part No.84031)

Felpro – TIMING COVER GASKET SET WITH REPAIR SLEEVE (Part No.TCS 45458)

Sealed Power – Engine Camshaft Bearing Set (Part No.1484M)

Sealed Power – Engine Piston Set (Part No.H814CP)

Cloyes Gear – Engine Balance Shaft Chain (Part No.9-4191)

Cloyes Gear – Engine Balance Shaft Chain Tensioner (Part No.9-5298)

Sealed Power – Engine Rocker Arm Kit (Part No.R-1095)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-216)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S358T)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40168-1)

Dorman – Rubber Expansion Plug 1-7/8 In. – Size Range 1-7/8 In. – 2 In. (Part No.02606)

Melling – Stock Replacement Type Oil Pump Intermediate Shaft (Part No.IS-72)

Dorman – Chrysler Steel Expansion Plug Kit, 11 Expansion Plugs, 2 Pipe Plugs (Part No.02651)

Sealed Power – Engine Piston (Part No.WH883CP)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26157 PT)

Felpro – Engine Gasket Set (Part No.260-3186)

INA US – ENGINE TIMING SET (Part No.ZC-9-0393SB)

Crown Auto Jeep Replacmnt – Oem Replacement (Part No.53010388)

Sealed Power – Engine Connecting Rod Bearing (Part No.1460A)

Cardone – Remanufactured Engine Control Computer (Part No.79-8923)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26157 PT)

Driveworks – Main Bearing Repair Sleeve (Part No.S-99181)

Dorman – Timing Cover Kit – Includes Gasket (Part No.635-401)

Melling – Stock Replacement Engine Assembly Lubricant, 4 oz. (Part No.M-10012)

National – Multi-Purpose Seal (Part No.3638)

Dayco – Premium Timing Belt, 46.5 Inch With 124 Round Tooth (Part No.95153)

Dayco – Timing Component Kit Without Belt, Dayco (Part No.84031)

Driveworks – Oil Seal (Part No.S-3638)

Cloyes Gear – Engine Timing Set (Part No.C-3072)

National – Multi-Purpose Seal (Part No.331227H)

Dorman – Timing Cover Kit – Includes Gasket (Part No.635-401)

National – Multi-Purpose Seal (Part No.713103)

Felpro – Engine Crankshaft Seal Kit (Part No.TCS 45131)

National – Multi-Purpose Seal (Part No.3103)

Cloyes Performance – High Performance Timing Chain (Part No.9-147)

Cloyes Performance – High Performance Timing Set (Part No.9-3503X9)

National – Shaft Repair Sleeve (Part No.99218)

National – Multi-Purpose Seal (Part No.3655)

Cloyes Performance – High Performance Timing Chain (Part No.9-135)

Cloyes Performance – High Performance Timing Set (Part No.9-3603X9)

Cloyes Gear – Engine Balance Shaft Chain Kit (Part No.9-4191S)

Dayco – TIMING CHAIN KIT (Part No.KTC1362)

Dayco – Timing Belt Kit With Components And Belt, Dayco (Part No.95153K1)

Dayco – TIMING CHAIN KIT (Part No.KTC1448)

Cloyes Gear – Engine Timing Chain (Part No.C380)

Cloyes Gear – Engine Balance Shaft Chain (Part No.9-4191)

Cloyes Gear – Engine Balance Shaft Sprocket (Part No.S642)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S712T)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50419 R)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50420 R)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40181)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber (Part No.OS 34503 R)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber (Part No.OS 34408 R)

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 45952)

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 45949)

National – Multi-Purpose Seal (Part No.710056)

Felpro – Fuel Pump Mounting Gasket (Part No.70627)

Felpro – VALVE COVER GASKET SET (Part No.VS 50334 R)

Felpro – Engine Gasket Set (Part No.260-1708)

Edelbrock – Valve Cover Gasket Set for Chrysler (Part No.7593)

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (Part No.362657.1)

Carquest – Air Charge Temperature Sensor Connector (Part No.28423)

Carquest Premium – Multi-Use Connector (Part No.ABA3459)

Dorman – Steel Cup Expansion Plug 1-1/4 In., SC, Height 0.300 (sold by each) (Part No.555-024)

Sealed Power – Engine Camshaft Bearing Set (Part No.1484M)

Sealed Power – Engine Camshaft Bearing Set (Part No.1790M)

Competition Cams – Big Mutha’ Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-602-4)

Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-212-2)

Competition Cams – Thumpr 227/241 Hydraulic Flat Cam K-Kit (Part No.K20-600-4)

Competition Cams – Xtreme Energy 236/242 Hydraulic Roller Cam (Part No.20-813-9)

Competition Cams – Xtreme Energy 224/230 Hydraulic Roller Cam (Part No.20-811-9)

Competition Cams – Thumpr 227/241 Hydraulic Roller Cam (Part No.20-600-9)

Competition Cams – Xtreme Energy 230/236 Hydraulic Roller Cam (Part No.20-812-9)

Competition Cams – Big Mutha’ Thumpr 243/257 Hydraulic Flat Cam (Part No.20-602-4)

Competition Cams – Magnum 230/230 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-232-4)