1992 Chevrolet S10 Blazer Performance Engines

More 1992 Chevrolet S10 Blazer Performance Engines

Find your specific 1992 Chevrolet S10 Blazer original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1992 Chevrolet S10 Blazer Performance Engines

Mr. Gasket – Water Outlet Gasket (Part No.738G)

Water Outlet Gasket

from

$30.99
Manufactured from a blend of nitrile rubber and fiber for excellent sealing and durability. Precision die cut for application.

Product Features:
  • Edge molded rubber water outlet gasket is reusable
  • Requires no gasket sealer
  • Solid aluminum carrier for strength/rigidity
See More

(6 reviews)
View Product

B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)

Torque Converter, Nitrous Holeshot 3000

from

$696.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 2800-3200 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More
View Product

B & M – Holeshot 2400 (Part No.70441)

Holeshot 2400

from

$689.99
Holeshot 2400 for GM 1998 to 2002 4L60E Camaro and Firebird with an LS1 engine Application: GM 1998 to 2002 4L60E Camaro and Firebird with LS1 A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benef

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More
View Product

B & M – Torque Converter, Holeshot 3000 (Part No.70421)

Torque Converter, Holeshot 3000

from

$717.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More
View Product

Mr. Gasket – Special Cam Bolt (Part No.944G)

Special Cam Bolt

from

$12.99
Grade 8, single bolt. Black plated finish. The washers are designed to secure the Mr. Gasket cam button pn1180, pn1181, and pn1183 or can be used as stock replacements.

Product Features:
  • Specialty and drive train fastener
  • Special cam bolts
  • Black plated finish
See More
View Product

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1002)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$68.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More
View Product

FEL-PRO Performance – Engine Cylinder Head Gasket (Part No.1029)

Engine Cylinder Head Gasket

from

$47.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Copper wire rings to essentially eliminate head brinelling and bending.
  • Not intended for use in emission controlled vehicles.
See More
View Product

FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1015)

Performance Cylinder Head Gasket

from

$44.49
Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:
  • Fel-Pro® Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Not intended for use in emission controlled vehicles.
  • Steel wire rings for the greatest combustion seal strength.
See More
View Product

Edelbrock – Sure Seat Valve Springs for Chevy 4.3L 90 Deg V6 1987-95 (Part No.5814)

Sure Seat Valve Springs for Chevy 4.3L 90 Deg V6 1987-95

from

$53.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More
View Product

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2908)

Engine Crankshaft Seal Kit

from

$45.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More
View Product

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2919)

Engine Crankshaft Seal Kit

from

$37.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More
View Product

Mr. Gasket – Rear Main Seal Gasket (Part No.29)

Rear Main Seal Gasket

from

$35.99
Made from silicone to withstand extreme engine oil temperatures and injection molded for a precise fit.

Product Features:
  • Made from silicone
  • Withstands extreme engine oil temps
  • Injection molded for a precise fit
See More
View Product

FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

Engine Timing Cover Gasket

from

$20.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Steel core gasket construction
  • Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
  • Not intended for use in emission controlled vehicles.
See More
View Product

Mr. Gasket – Timing Cover Gasket Set (Part No.90)

Timing Cover Gasket Set

from

$21.99
Made from high grade cork granules and a neoprene binder, these gaskets will not shrink or stick and provide excellent sealing and durability. These gaskets can be reused.

Product Features:
  • Will not shrink or stick
  • Provides excellent sealing and durability
  • Reusable
See More
View Product

Mr. Gasket – Timing Cover Seal (Part No.18)

Timing Cover Seal

from

$16.99
Mr. Gasket manufactures a variety of performance parts and accessories, including carburetor and fuel accessories, cooling system accessories, engine components, fasteners, gaskets, and suspension and drive line components. Besides gaskets and fasteners, the Mr. Gasket brand provides a variety of performance and racing products for all parts of your vehicle including: carburetor and fuel accessories, chrome-plated accessories, cooling system accessories, engine components, ignition and electrical accessories, shifter accessories, specialty tools and suspension and driveline components. Mr .Gasket also includes Ultra-Seal gaskets and fasteners.

Product Features:
  • Nitrile rubber and high density cork
  • Will not shrink or stick
See More
View Product

Spectre – Throttle Body Injection Spacer (Part No.11252)

Throttle Body Injection Spacer

from

$94.99
Manufactured from high quality machine finished aluminum, Spectre’s Throttle Body Spacers are engineered to improve engine performance. By providing added volume to the intake manifold and directing air through a tapered internal constriction, this spacer utilizes the Venturi effect to increase the speed of air flowing into your intake manifold. Spectre has designed a number of kits to fit a wide range of specific applications. Each kit includes the necessary gaskets and hardware to bolt directly to the factory components, making installation quick and easy.

Product Features:
  • Includes the necessary gaskets and hardware to bolt directly to the factory components
  • Each kit is designed for the applications listed
  • Manufactured from high quality machine finished aluminum
  • Can be installed in less than an hour using common hand tools with no drilling or cutting required
  • Simple to install
See More

(2 reviews)
View Product

Weiand – Action Plus Water Pumps (Part No.9240P)

Action Plus Water Pumps

from

$215.99
Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Product Features:
  • Twisted Snout Water Pump Design For Updated Style
  • Street Performance
  • Heavy Duty Shaft w/5/8 in. Pilot
  • Six-Blade Stamped Steel
  • Anti-Cavitation Impeller
  • 100 Percent Leak Tested
See More

(3 reviews)
View Product

Weiand – Team G; Water Pump Spacer Kit (Part No.8207)

Team G; Water Pump Spacer Kit

from

$112.99
Use with a short water pump to convert to a long water pump.

Product Features:
  • Water Pump Spacer Kit
See More
View Product

Edelbrock – Performer 2V-4V; Intake Manifold Gasket Set (Part No.6941)

Performer 2V-4V; Intake Manifold Gasket Set

from

$11.99


Product Features:
  • Replacement Gasket For PN[3787] Edelbrock Intake
  • One Gasket Only
  • Goes Between Base PN[3785] And Top PN[3787]
  • Also Included in Base PN[3787]
See More
View Product

Edelbrock – Performer Small-Block Chevy 2.8L Intake Manifold (Part No.3785)

Performer Small-Block Chevy 2.8L Intake Manifold

from

$361.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Ideal for Light-Duty Pickups and Passenger Cars
  • Unique Design Allows Use Of 2 bbl Or 4 bbl Top
See More
View Product

Edelbrock – Performer Top Small-Block Chevy 4V Intake Manifold (Part No.3789)

Performer Top Small-Block Chevy 4V Intake Manifold

from

$205.99
Product Features:
  • Matching Top For Edelbrock Base Intake PN[3785]
  • Designed for Standard Flange 4-barrel Carburetor
  • Contains Necessary Linkage And Bracketry
  • Match With Edelbrock Valve Covers Pn[4488]
See More
View Product

Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)

Super Intake Manifold Bolts

from

$26.99
These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

Product Features:
  • Assures Accurate Torque App
  • Prevents Galling Manifold
  • Grade 5 Material
  • Black Oxide Coasted
See More
View Product

Mr. Gasket – Intake Manifold Bolts (Part No.6091)

Intake Manifold Bolts

from

$29.99
Choose from grade 5 hex or socket head intake bolts or grade 8 bolts with twelve point smaller-than-standard head and flange, ideal for where space is minimal. Bolts and washers are bright zinc plated for protection and appearance.

Product Features:
  • Grade 8 Material
  • Extra Thick Flat Washers
  • Ideal For Minimal Space
  • 12-pt Head And Flange
  • Zinc Plated For Protection
See More

(5 reviews)
View Product

Edelbrock – Performer 4.3L T.B.I. V6; Intake Manifold (Part No.37131)

Performer 4.3L T.B.I. V6; Intake Manifold

from

$553.99


Product Features:
  • Polished Manifold Version of PN[3713]
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Computer Chip Available – Return Card in Packaging
  • Accepts All Factory Accessories
  • Not for Vehicles with Flash Memory Computer
  • Gains 6/10s of a Second in 10 to 70 MPH
  • Stock Throttle Body Remains in Stock Position
See More
View Product

Edelbrock – Performer Small-Block Chevy 4.3L T.B.I. V6 Intake Manifold (Part No.3713)

Performer Small-Block Chevy 4.3L T.B.I. V6 Intake Manifold

from

$566.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Computer Chip Available – Return Card in Packaging
  • Accepts All Factory Accessories
  • Not for Vehicles with Flash Memory Computer
  • Gains 6/10s of a Second in 10 to 70 MPH
  • Stock Throttle Body Remains in Stock Position
See More
View Product

1992 Chevrolet S10 Blazer Performance Engines

Maybe you’re in the middle of a full rebuild of that 1992 Chevrolet S10 Blazer. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 17 different Performance Engines in our inventory ranging from $12.99 to $717.99. That means you can find the exact parts or products you need to keep that 1992 Chevrolet S10 Blazer running smoothly.

Performance Engines are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1992 Chevrolet S10 Blazer. Mr. Gasket, Weiand, and Spectre are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1992 Chevrolet S10 Blazer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Performance Engines to keep your 1992 Chevrolet S10 Blazer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1992 Chevrolet S10 Blazer Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1992 Chevrolet S10 Blazer demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your S10 Blazer the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular Spectre Performance Engines

We carry Spectre parts in our stock across Performance Throttle Body Spacers categories, plus more. For a 1992 Chevrolet S10 Blazer, our most popular Spectre Performance Engines include:
Throttle Body Injection Spacer
from $94.99
(2)
Throttle Body Injection Spacer
Performance Throttle Body Spacers

Top 1992 Chevrolet S10 Blazer Performance Engines from Mr. Gasket

Mr. Gasket products are another trusted brand when it comes to Performance Engines for your 1992 Chevrolet S10 Blazer. Popular Mr. Gasket parts include:
Water Outlet Gasket
from $30.99
(6)
Water Outlet Gasket
Performance Water Outlet Gaskets
Intake Manifold Bolts
from $29.99
(5)
Intake Manifold Bolts
Performance Intake Manifolds

FAQs for 1992 Chevrolet S10 Blazer Performance Engines

What are the most purchased Performance Engines for the 1992 Chevrolet S10 Blazer?

Out of 17 Performance Engines for the 1992 Chevrolet S10 Blazer, the most popular in our inventory are:
Action Plus Water Pumps
from $215.99
(3)
Action Plus Water Pumps
Performance Engine Water Pumps
Special Cam Bolt
from $12.99
This product is not rated
Special Cam Bolt
Performance Engine Camshaft Bolts
Timing Cover Gasket Set
from $21.99
This product is not rated
Timing Cover Gasket Set
Performance Engine Timing Cover Gasket Sets

More Popular Parts for All Makes