1992 Chevrolet G20 Differentials

Essential 1992 Chevrolet G20 Differentials

Pro-King – Differential Cover Plug (Part No.742G484)

Differential Cover Plug

from

$6.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Bearing Install Kit For ’88 And Older 10.5" GM 14 Bolt Truck Differential (Part No.11056)

Bearing Install Kit For '88 And Older 10.5" GM 14 Bolt Truck Differential

from

$369.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits 1988 and down GM 10.5″ 14 bolt truck
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, pilot bearing, marking compound and brush.
See More

USA Standard Gear – Standard Spider Gear Set For GM 10.5" 14 Bolt Truck (Part No.39022)

Standard Spider Gear Set For GM 10.5" 14 Bolt Truck

from

$318.99
Product Features:
  • Spider gear kit
  • Fits GM 10.5″ 14 bolt truck open differential
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes (Part No.30229)

Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes

from

$57.99
8.5, 9.5, & 8.2 Buick, Oldsmobile, Pontiac GM REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits GM 8.5″, 9.5″ and 8.2″ Buick, Oldsmobile and Pontiac
See More

Dorman – Help – Pinion Crush Sleeves (Part No.81057)

Pinion Crush Sleeves

from

$5.29
This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
  • Required replacement – when servicing the differential
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Yukon Gear – Positraction Clutch Guide (Part No.33352)

Positraction Clutch Guide

from

$8.99
Positraction clutch guide.

Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
  • Compatible with Dura Grip positractions only
See More

National – Bearings (Part No.HM89449)

Bearings

from

$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-500)

Differential Yoke including Seal and Pinion Nut

from

$139.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 13391)

DIFFERENTIAL GASKET

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – 18 Plate Steel Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16110)

18 Plate Steel Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$483.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 18 piece kit
  • Steel clutches
See More

Yukon Gear – Carrier Installation Kit For GM 8.5" Differential With HD Bearings (Part No.57009)

Carrier Installation Kit For GM 8.5" Differential With HD Bearings

from

$148.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.5″ differential with HD bearings for large journal carrier. This kit contains carrier bearings, races and shims. This kit is used in 8.5″ differentials using a Yukon Dura Grip, Eaton posi, ValueTrac, True Trac, Pro-Series Auburn, Detroit Locker or standard carrier with large bearing journals.

Product Features:
  • Fits GM 8.5″ with aftermarket positraction
  • Works with Heavy Duty Bearings
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Richmond Gear – Differential Mini Spool (Part No.78-1028-1)

Differential Mini Spool

from

$124.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Driveworks – Oil Seal (Part No.S-2043)

Oil Seal

from

$7.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down (Part No.26030)

Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down

from

$1110.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • 4.10 ratio and down only
  • Clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Pro-King – Differential Internal Nest Kit (Part No.742G717A)

Differential Internal Nest Kit

from

$179.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Motive Gear – Differential Carrier Shim Kit (Part No.GM9.5SSK)

Differential Carrier Shim Kit

from

$21.99


Product Features:
  • KIT SHIM SIDE 9.5″ GM
See More

Mr. Gasket – Differential Cover Kit (Part No.9895)

Differential Cover Kit

from

$72.39
The Mr. Gasket chrome plated rear end cover is made from heavy-gauge steel, and comes complete with bolts and gaskets.

Product Features:
  • Chrome plated steel for looks
  • Includes bolts and gasket
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Yukon Gear – Mini Spool For GM 8.5" With 30 Spline Axles (Part No.32233)

Mini Spool For GM 8.5" With 30 Spline Axles

from

$188.99
Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.5″ with 30 spline axles
  • Installs into a standard open carrier case
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Pinion Install Kit For ’88 And Older 10.5" GM 14 Bolt Truck Differential (Part No.13058)

Pinion Install Kit For '88 And Older 10.5" GM 14 Bolt Truck Differential

from

$349.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1988 and down GM 10.5″ 14 bolt truck
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Bearing Race Driver (Part No.56009)

Bearing Race Driver

from

$188.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits 382A race
  • All steel construction
See More

Pro-King – Differential Cross Shaft (Part No.742G673)

Differential Cross Shaft

from

$28.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – 10.5" GM 14 Bolt Truck Ring Gear Bolt (Part No.33050)

10.5" GM 14 Bolt Truck Ring Gear Bolt

from

$11.99
10.5″ GM 14 bolt truck ring gear bolt 4.56 & up. 9/16″ x 18. 2.522″ overall length.

Product Features:
  • Ring gear bolt for GM 10.5″ 14 bolt truck
  • 4.56 and up ratio
  • 1/2″ x 18 thread
  • 2.522″ overall length
See More

Powertrax – No-Slip Traction System (Part No.9207883005)

No-Slip Traction System

from

$551.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Dura Grip Positraction For GM 9.5" With 33 Spline Axles (Part No.26025)

    Dura Grip Positraction For GM 9.5" With 33 Spline Axles

    from

    $1025.00
    The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

    Product Features:
    • Fits GM 9.5″
    • 4-spring, clutch style positraction
    • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
    • Fully rebuildable
    • Assembled in the USA
    See More

    Motive Gear – Differential Ring and Pinion (Part No.GM10-308A)

    Differential Ring and Pinion

    from

    $179.99


    Product Features:
    • GM 10BL 8.5 R/P 3.08
    See More

    USA Standard Gear – Standard Spider Gear Set For GM 8.5", 28 Spline (Part No.39026)

    Standard Spider Gear Set For GM 8.5", 28 Spline

    from

    $209.99
    Product Features:
    • Spider gear kit
    • Fits GM 8.5″ 28 spline open differential
    • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
    See More

    1992 Chevrolet G20 Differentials

    Maybe you’re in the middle of a full rebuild of that 1992 Chevrolet G20. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 309 different Differentials in our inventory ranging from $1.99 to $2,324.99. That means you can find the exact parts or products you need to keep that 1992 Chevrolet G20 running smoothly.

    Differentials are only as good as their brand. We stock 16 different brands to make sure you have plenty of trusted parts to choose from for your 1992 Chevrolet G20. Valvoline, FELPRO, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1992 Chevrolet G20, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,380 reviews in this category, some of the top rated parts include Rear Differential Cover with 4.1 stars and Differential Shaft Lock Bolt with 4.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1992 Chevrolet G20 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1992 Chevrolet G20 Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1992 Chevrolet G20 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your G20 the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Top 1992 Chevrolet G20 Differentials from Felpro

    Felpro products are another trusted brand when it comes to Differentials for your 1992 Chevrolet G20. Popular Felpro parts include:
    Differential Cover Gasket
    from $9.99
    (195)
    Differential Cover Gasket
    Rear Differential Cover Gaskets

    FAQs for 1992 Chevrolet G20 Differentials

    What are the most purchased Differentials for the 1992 Chevrolet G20?

    Out of 309 Differentials for the 1992 Chevrolet G20, the most popular in our inventory are:
    Tapered Cone/Cup Wheel Bearing Set
    from $13.99
    (14)
    Tapered Cone/Cup Wheel Bearing Set
    Front Differential Pinion Bearings
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    Bearings
    from $23.99
    (7)
    Bearings
    Front Differential Pinion Bearings

    What are the top-rated 1992 Chevrolet G20 Differentials?

    Top-rated Differentials for your 1992 Chevrolet G20 based on customer reviews/ratings are:
    Rear Differential Cover
    from $32.99
    (14)
    Rear Differential Cover
    “Heavy steel with the original magnet. Fits like original.. Not a cheap stamping by any means”
    Differential Shaft Lock Bolt
    from $5.99
    (11)
    Differential Shaft Lock Bolt
    “great”
    Differential Yoke including Seal and Pinion Nut
    from $139.99
    (10)
    Differential Yoke including Seal and Pinion Nut
    “Will this fot 2001 jeep grand cherokee 4.0 limited with dana 35 read end”