1992 Chevrolet Blazer Differentials

Find your specific 1992 Chevrolet Blazer original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1992 Chevrolet Blazer Differentials

from

$88.94

Differential Bearing

from

$11.99

Standard Open pinion gear thrust washer for GM 12P and 12T.

Product Features:

Pinion gear thust washer for GM 12 bolt passenger car and truck
Fits standard open differentials only

from

$174.99

Pump up kit, Zip Locker.

Product Features:

Tire pump up kit
Includes hose, fittings, couplers and teflon tape

from

$41.99

Product Features:

Shim kit
Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction

from

$264.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits standard rotation Dana Spicer 44 front
Included are pinion bearings and races, pinion seal, complete pinion shim kit, and marking compound with brush.

from

$139.99

Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:

Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
Validated fit – this differential end yoke has been tested to confirm accurate fit

from

$229.99

Product Features:

DANA 44 R/P 3.92 STD MG

from

$28.49

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$12.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$338.99

Yukon Performance steel spool for Dana 44 with 30 spline axles. fits 3.92 and up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler Dana Spicer 44 with 30 spline axles
3.92 and up ratio only
Provides 100% traction to both wheels at all times
Not recommended for street driven vehicles

from

$13.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$5.99

This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$445.99

The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$159.99

Product Features:

INTERNAL KIT-GM 7.6″ W/28 SPLINE

from

$215.99

Bearing race driver for Dana 44 front (TK 02820). No return.

Product Features:

Bearing race driver
Fits 02820 race
All steel construction

from

$6.59

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$7.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$61.99

Product Features:

MINI INSTALL KIT DANA 44

from

$11.99

Side gear thrust washer for 8.25″ GM IFS.

Product Features:

Side gear thrust washer
Fits GM 8.25″ IFS

from

$92.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (includes Supershims)

Product Features:

Fits GM 8.5″ front
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$3.99

Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.

Product Features:

Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50

from

$23.29

National« has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today┐s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20░F to 300░F / -29░C to 49░C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$135.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

KIT BRG & SEAL GM 10 BOLT MASTER NON IFS FRONT / REAR

from

$5.99

Product Features:

Floater roll pin
Fits Dana Spicer 44 and Chrysler 8.75″
Powr Lok positraction only

from

$195.99

Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:

Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$8.99

Positraction clutch guide.

Product Features:

Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
Compatible with Dura Grip positractions only

from

$6.79

Product Features:

Brand may vary by location

from

$455.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

Popular 1992 Chevrolet Blazer Differentials Categories

Differential Oil

Differential Pinion Yokes

Rear Differential Cover Gaskets

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Cover Plugs

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Differential Pinion Supports

Differential Lock Assemblies

Differential Spools

Differential Carrier Bearings

Differential Carrier Bearing Adjusters

Rear Housing Cover Gaskets

Differential Pinion Bearing Kits

Differential Seals

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Differential Pinion Gear Washers

Differential Ring and Pinion Kits

Limited Slip Differential Assemblies

Differential Spider and Pinion Gear Kits

Differential Clutch Pack Clips

Maybe you’re in the middle of a full rebuild of that 1992 Chevrolet Blazer. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 256 different Differentials in our inventory ranging from $1.99 to $3,289.99. That means you can find the exact parts or products you need to keep that 1992 Chevrolet Blazer running smoothly.

Differentials are only as good as their brand. We stock 17 different brands to make sure you have plenty of trusted parts to choose from for your 1992 Chevrolet Blazer. Valvoline, FELPRO, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1992 Chevrolet Blazer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 318 reviews in this category, some of the top rated parts include Rear Differential Cover with 4.1 stars and Rear Differential Cover with 4.8 stars.

So if you’re in the market for aftermarket Differentials to keep your 1992 Chevrolet Blazer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1992 Chevrolet Blazer Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1992 Chevrolet Blazer demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Blazer the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Spectre Differentials

We carry Spectre parts in our stock across Differential Covers categories, plus more. For a 1992 Chevrolet Blazer, our most popular Spectre Differentials include:

from $59.99

(1)

Differential Cover

Differential Covers

Top 1992 Chevrolet Blazer Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1992 Chevrolet Blazer. Popular Felpro parts include:

from $9.99

(195)

Differential Cover Gasket

Rear Differential Cover Gaskets

FAQs for 1992 Chevrolet Blazer Differentials

What are the most purchased Differentials for the 1992 Chevrolet Blazer?

Out of 256 Differentials for the 1992 Chevrolet Blazer, the most popular in our inventory are:

from $14.49

(2)

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

Differential Oil

from $35.99

(17)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

Differential Oil

from $13.99

(14)

Tapered Cone/Cup Wheel Bearing Set

Front Differential Pinion Bearings

What are the top-rated 1992 Chevrolet Blazer Differentials?

Top-rated Differentials for your 1992 Chevrolet Blazer based on customer reviews/ratings are:

from $32.99

(14)

Rear Differential Cover

“Heavy steel with the original magnet. Fits like original.. Not a cheap stamping by any means”

from $55.99

(11)

Rear Differential Cover

“Good quality cover, nice coat of paint on it. Should outlast the truck.”

from $5.99

(11)

Differential Shaft Lock Bolt

“great”

1992 Chevrolet Blazer Differentials

More 1992 Chevrolet Blazer Differentials

Essential 1992 Chevrolet Blazer Differentials

ACDelco – Differential Bearing (Part No.J7060723477ACD)

Yukon Gear – Standard Open Pinion Gear Thrust Washer For GM 12P And 12T (Part No.33381)

Yukon Gear – Pump Up Kit, Zip Locker (Part No.34031)

Yukon Gear – Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16042)

Yukon Gear – Pinion Install Kit For Dana 44 Differential (Part No.13020)

Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-500)

Motive Gear – Differential Ring and Pinion (Part No.D44-392)

Pro-King – Differential Cross Shaft (Part No.742G673)

National – Multi Purpose Seal (Part No.223255)

Yukon Gear – Steel Spool For Dana 44 With 30 Spline Axles, 3.92 & Up (Part No.32041)

Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-35)

Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

Powertrax – Lock Right Locker (Part No.1930-LR)

Motive Gear – Differential Carrier Gear Kit (Part No.GM7.6BI)

Yukon Gear – Bearing Race Driver (Part No.56003)

Pro-King – Differential Cover Plug (Part No.742G484)

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55072)

Motive Gear – Differential Gear Install Kit (Part No.D44IK)

Yukon Gear – Side Gear And Thrust Washer For 8.25" GM IFS (Part No.33378)

Yukon Gear – Minor Install Kit For GM 8.5" Front Differential (Part No.12056)

Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)

National – Multi Purpose Seal (Part No.5778)

Motive Gear – Differential Master Bearing Kit – Timken (Part No.R10RMKT)

Yukon Gear – Replacement Floater Roll Pin For Dana 44 & 8.75" Chrysler Power Lok (Part No.33326)

Dorman – Rear Axle Shaft, Left or Right (Part No.630-103)

Yukon Gear – Positraction Clutch Guide (Part No.33352)

Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

Pro-King – Differential Case (Loaded) (Part No.742G715B)

Popular 1992 Chevrolet Blazer Differentials Categories