1992 Buick Skylark Alternators and Starters

Essential Alternators and Starters for 1992 Buick Skylarks

Carquest Premium – Starter: Remanufactured, Limited Lifetime Warranty (Part No.3689S)

Starter: Remanufactured, Limited Lifetime Warranty

from

$103.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a Limited Warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


    Product Features:
    • Each unit is triple-tested to ensure quality and performance
    • All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
    • Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
    • Remanufactured to meet or exceed OE specifications, ensuring reliable fit, form, and function for optimal vehicle performance.
    • 100% electronic testing of all critical components and the entire unit guarantees dependable operation and long-lasting durability.
See More

Carquest HD Electrical – Starter: New, 12V, 9 Tooth (Part No.72-3838N)

Starter: New, 12V, 9 Tooth

from

$216.99
Carquest Starters take advantage of the power of 100% NEW to restore hard working vehicles to OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest Starters are primed to keep fleets moving forward. Built to perform in severe duty environments, with high output capabilities built in through improved technical & material formulas for high power output and efficient performance

Product Features:
  • High quality components form the foundation our parts are built from. Transpo¿s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
  • High quality components form the foundation our parts are built from. Transpo┐s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
  • Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
  • Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
  • Integrated magnetic switch provides protection against weak power from batteries.
  • Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
  • Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
See More

Carquest Premium – Starter: Remanufactured, Limited Lifetime Warranty (Part No.6312S)

Starter: Remanufactured, Limited Lifetime Warranty

from

$79.99
The Carquest Premium Remanufactured Starter is engineered to deliver reliable performance and long-lasting durability, meeting or exceeding O.E.M. specifications. Each unit undergoes a rigorous triple-testing process, ensuring top-notch quality and functionality from individual components to final assembly. Unlike rebuilt starters, this remanufactured unit features all-new wear components, including brushes, bushings, and bearings, for enhanced dependability and a like-new performance. Designed to provide a precise fit, form, and function, it guarantees seamless compatibility with your vehicle. For added peace of mind, Carquest offers access to a Tech Hotline staffed by ASE Certified Technicians, ensuring expert support whenever you need it. Choose this starter for a dependable solution that combines superior craftsmanship with exceptional value.

Product Features:


    Product Features:
    • Each unit is triple-tested to ensure quality and performance
    • All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
    • Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
    • Engineered to meet or exceed O.E.M. specifications, ensuring reliable performance and compatibility with your vehicle.
    • Designed for precise fit, form, and function, guaranteeing seamless installation and operation.
See More

Carquest Premium – Alternator: Remanufactured, 78 Amps, Limited Lifetime Warranty (Part No.7273-6A)

Alternator: Remanufactured, 78 Amps, Limited Lifetime Warranty

from

$132.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


    Product Features:
    • Designed to meet or exceed OE specifications for fit, form and function
    • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
    • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
    • 100% new OE-quality brushes and bearings are used to ensure long service life
    • Rotors and stators are load tested and double insulated for maximum charging performance
    • Slip rings are precision polished for maximum brush contact and service life
    • Application-specific technical bulletins included where applicable
    • All units are 100% triple tested to ensure quality and performance
    • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Premium – Alternator: Remanufactured, 63 Amps, Limited Lifetime Warranty (Part No.7127-1WA)

Alternator: Remanufactured, 63 Amps, Limited Lifetime Warranty

from

$134.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


    Product Features:
    • Designed to meet or exceed OE specifications for fit, form and function
    • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
    • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
    • 100% new OE-quality brushes and bearings are used to ensure long service life
    • Rotors and stators are load tested and double insulated for maximum charging performance
    • Slip rings are precision polished for maximum brush contact and service life
    • Application-specific technical bulletins included where applicable
    • All units are 100% triple tested to ensure quality and performance
    • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Mr. Gasket – Alternator: Remanufactured, 80 Amps (Part No.5123)

Alternator: Remanufactured, 80 Amps

from

$417.99
The remanufactured Mr. Gasket chrome alternator delivers exceptional dependability, exceeding original equipment specifications to ensure reliable performance. Designed to fit most GM vehicles from 1966 to 1972, this alternator features a GM 10DN style with a durable chrome-plated finish that adds a sleek touch under the hood. With an impressive 80-amp output and 12V voltage, it provides robust power for your vehicle’s electrical system. The 6.6″ bolt spacing ensures easy installation, while the included 1-groove V-belt pulley enhances compatibility with OEM-style regulators. Whether you’re restoring a classic or upgrading your ride, this alternator combines functionality, durability, and style to meet your automotive needs.

Product Features:
  • Fits Most 1966-’72 GM Vehicles
  • Bolt Spacing 6.6″
  • 80 Amps
  • GM 10DN Style Alternator
  • Chrome Plated Finish
  • includes V-Belt Pulley – 1-Groove
  • Use with OEM Style Regulator
See More

Carquest Premium – Starter Brush (Part No.XAA1046)

Starter Brush

from

$1.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest – Starter Brush Set (Part No.X265)

Starter Brush Set

from

$6.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Starter Brush (Part No.XAA1014)

Starter Brush

from

$5.29
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Starter Solenoid (Part No.SBC3223)

Starter Solenoid

from

$43.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Starter Solenoid (Part No.SBC2174)

Starter Solenoid

from

$45.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Starter Solenoid (Part No.SAC1146)

Starter Solenoid

from

$39.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1165)

Multi-Use Connector

from

$30.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1127)

Multi-Use Connector

from

$19.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1263)

Multi-Use Connector

from

$14.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Starter Bushing (Part No.SBA5143)

Starter Bushing

from

$1.79
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Starter Bushing (Part No.SBA5145)

Starter Bushing

from

$1.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest – Starter Bushing (Part No.SB0)

Starter Bushing

from

$3.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1047)

Multi-Use Connector

from

$20.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1031)

Multi-Use Connector

from

$4.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest – Alternator Electrical Connector (Part No.PT68)

Alternator Electrical Connector

from

$4.29
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
  • Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
  • All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
  • Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Alternator Rectifier Bridge (Part No.SCA1021)

Alternator Rectifier Bridge

from

$68.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:
  • Application matched components ensure the charging system can be returned to like new condition.
See More

Carquest Premium – Alternator Rectifier Bridge (Part No.SCA1015)

Alternator Rectifier Bridge

from

$25.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:
  • Application matched components ensure the charging system can be returned to like new condition.
See More

Carquest Premium – Alternator Rectifier Bridge (Part No.SCA1008)

Alternator Rectifier Bridge

from

$31.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:
  • Application matched components ensure the charging system can be returned to like new condition.
See More

Dorman – Help – Starter Mounting Bolt, Type 1 Long (Part No.72004)

Starter Mounting Bolt, Type 1 Long

from

$5.79
This starter bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this starter bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Upgrade your 1992 Buick Skylark with Top-Quality Alternators and Starters

When it comes to maintaining or upgrading your 1992 Buick Skylark, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Alternators and Starters are key to keeping your Skylark functioning at its best. At Advance Auto Parts, we offer a wide selection of 14 Alternators and Starters for the 1992 Buick Skylark, designed to meet your needs without breaking the bank. From Voltage Regulator Part replacements to Starter Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Alternators and Starters for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Alternators and Starters for your 1992 Buick Skylark at great prices. Our Alternators and Starters inventory for this model ranges from just $1.99 to $201.99, with an average price of $63.79. Our 14 Alternators and Starters in stock come from 4 trusted brands, so you’re sure to find the right part for your 1992 Buick Skylark without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 Buick Skylark, we stock popular OEM and aftermarket Alternators and Starters from top names like Carquest, and more. Carquest Alternators and Starters start at just $104.99 and boast an impressive 4.4 stars average rating from customers. With 74 customer reviews and counting, our 1992 Buick Skylark Alternators and Starters have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Alternators and Starter upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1992 Buick Skylark is always ready to roll. We’re committed to providing you with everything you need to keep your Skylark in top shape, all in one place. Start shopping confidently below for your 1992 Buick Skylark!

Best-Selling Voltage Regulator Parts for 1992 Buick Skylarks

Enhance the driving experience in your Buick with 1 quality Voltage Regulator Part components, starting at $19.99.

Carquest Premium – Multi-Use Connector (Part No.PTA1127)

Multi-Use Connector

from

$19.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Most Popular 1992 Buick Skylark Starter Parts

Customize your Buick with 8 Starter Parts products like Starters, Starter Solenoids, and Starter Bolts, all priced under $161.99.

Carquest Standard – Starter: Remanufactured, 1 Year Limited Warranty (Part No.6339SV)

Starter: Remanufactured, 1 Year Limited Warranty

from

$104.99
Product Features:
  • Remanufactured (not rebuilt) to meet or exceed OEM quality in fit, form, and function
  • Triple Testing process (component, assembly process and final product) to ensure reliability
  • An economical option that meets or exceeds OE specifications
  • Tech Hotline with trained ASE Certified Technicians: Call CARQUEST Technical Support at 1-800-228-9672
  • One year warranty gives you peace of mind
  • Designed to meet OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Premium – Starter: Remanufactured, Limited Lifetime Warranty (Part No.6339S)

Starter: Remanufactured, Limited Lifetime Warranty

from

$134.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a Limited Warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


Product Features:
  • Each unit is triple-tested to ensure quality and performance
  • All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
  • Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
  • Remanufactured to meet or exceed OE specifications for fit, form, and function, ensuring reliable performance and compatibility.
  • 100% electronic testing of all critical components and the entire unit guarantees optimal functionality and durability.
See More

Carquest Premium – Starter Solenoid (Part No.SBC3223)

Starter Solenoid

from

$43.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Dorman – Help – Starter Mounting Bolt, Type 1 Long (Part No.72004)

Starter Mounting Bolt, Type 1 Long

from

$5.79
This starter bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this starter bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Professional – Starter: New, Limited Lifetime Warranty (Part No.6339SN)

Starter: New, Limited Lifetime Warranty

from

$161.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • All new components are utilized to ensure long service life
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Armatures and commutators are 100% load tested
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest – Starter Solenoid (Part No.84C1006)

Starter Solenoid

from

$33.99
The Starter Solenoid is the relay of the starting circuit that carries the high amperage required when the starter motor is engaged. The solenoid is typically energized by the starter switch when commanded by the vehicle operator. Starter solenoids may also be used in other high amperage circuits, compare solenoid specification to your circuit needs before installing.

Product Features:
  • Application matched component to ensure the system can be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Starter Bushing (Part No.SBA5144)

Starter Bushing

from

$2.49
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Starter Brush (Part No.XAA1046)

Starter Brush

from

$1.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Top Picks for 1992 Buick Skylark Alternator Parts

Upgrade Buick Skylarks with top-quality Alternator Parts parts, including 5 OEM and aftermarket selections for your 1992 model.

Carquest Premium – Multi-Use Connector (Part No.PTA1047)

Multi-Use Connector

from

$20.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Alternator: Remanufactured, 105 Amps, Limited Lifetime Warranty (Part No.8137-11A)

Alternator: Remanufactured, 105 Amps, Limited Lifetime Warranty

from

$109.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • 100% new OE-quality brushes and bearings are used to ensure long service life
  • Rotors and stators are load tested and double insulated for maximum charging performance
  • Slip rings are precision polished for maximum brush contact and service life
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Professional – Alternator: New, 105 Amps, Limited Lifetime Warranty (Part No.8137-11AN)

Alternator: New, 105 Amps, Limited Lifetime Warranty

from

$201.99
Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • All new components are utilized to ensure long service life
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
  • Rotors and stators are load tested and double insulated for maximum charging performance
See More

Carquest Premium – Alternator: Remanufactured, 100 Amps, Limited Lifetime Warranty (Part No.7928-11A)

Alternator: Remanufactured, 100 Amps, Limited Lifetime Warranty

from

$151.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • 100% new OE-quality brushes and bearings are used to ensure long service life
  • Rotors and stators are load tested and double insulated for maximum charging performance
  • Slip rings are precision polished for maximum brush contact and service life
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Premium – Alternator Rectifier Bridge (Part No.SCA1021)

Alternator Rectifier Bridge

from

$68.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:
  • Application matched components ensure the charging system can be returned to like new condition.
See More

Top-Rated Alternators and Starters Brands For Your 1992 Buick Skylark

Shop for the best-rated brands offering Alternators and Starters and other products for your 1992 Buick Skylarks. Below you’ll find some of our best rated Alternators and Starters from Carquest, and more. Alternators and Starters from these brands that fit a 1992 Skylark start at just $104.99 and are rated as high as 4.4 stars. OEM and aftermarket Alternators and Starters don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest 1992 Buick Skylark Alternators and Starters

When it comes to maintaining or upgrading your 1992 Buick Skylark, using quality Alternators and Starters is essential to ensure durability and a perfect fit. Carquest ticks all of those boxes. We offer a wide selection of Carquest Alternators and Starters, specifically designed for the 1992 Buick Skylark. With over 1 Carquest brand Alternators and Starters in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $104.99. Plus, with over 27 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Alternators and Starters will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Starter: Remanufactured, 1 Year Limited Warranty
from $104.99
(27)
Starter: Remanufactured, 1 Year Limited Warranty
“Excellent”

FAQs for 1992 Buick Skylark Alternators and Starters

Which Alternators and Starters are best-sellers for 1992 Buick Skylarks?

Out of 14 Alternators and Starters that fit 1992 Buick Skylarks, the following parts are the top sellers:

What’s the price range for 1992 Buick Skylark Alternators and Starters?

Alternators and Starter prices for the 1992 Buick Skylark start at $1.99 and go up to $201.99 for the most premium parts.

What’s the average price of a Alternators and Starter for a 1992 Buick Skylark?

The average price for Alternators and Starters for the 1992 Buick Skylark is $63.79. Keep in mind the variety of part types within our Alternators and Starter category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Alternators and Starters for other Buick Skylark model years?

Yes, we currently carry Alternators and Starters for 35 model years of Buick Skylarks between 1954 and 1998. Alternators and Starters are bought most frequently for the following model years: 1998, 1997, 1996, 1995, 1994, 1993, 1991, 1990, and 1989.

What are the cheapest Alternators and Starters for my 1992 Buick Skylark?

The cheapest 1992 Buick Skylark Alternators and Starters we carry in stock are:

What are the top-rated Alternators and Starters that fit the 1992 Buick Skylark?

Out of 74 reviews by customers, our 1992 Buick Skylark Alternators and Starters have an average customer rating of . These are some of the highest-rated Alternators and Starter types for the 1992 Buick Skylark and their top-rated products:

What types of Alternators and Starters do you sell for my 1992 Buick Skylark?

As of 11/2/25, these are some of the most in-demand types of Alternators and Starters for a 1992 Buick Skylark:

Can I get help with 1992 Buick Skylark Alternators and Starter orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Alternators and Starters and more.

What is your return policy for Buick Skylark Alternators and Starters?

Advance Auto Parts keeps returns simple. For new Buick Skylark Alternators and Starters and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.