1992 Buick Park Avenue Brake Parts

Below you will find various in-demand Buick Brake Parts, components and accessories for your 1992 Park Avenue. Advance Auto Parts has popular Park Avenue parts like Brake Rotors and Drums, Brake Calipers, Brake Pads and Shoes and more. You’ll also find aftermarket and OEM Brake Parts for other Park Avenue model years including 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and more. Select a category of 1992 Buick Park Avenue Brake Parts below and start saving instantly.

Popular 1992 Buick Park Avenue Brake Parts Categories

Front Brake Rotors

Rear Brake Pads and Shoes

Front Brake Pads and Shoes

Rear Brake Drums

Front Brake Calipers

Disc Brake Pad and Rotor Kits

Brake Wheel Cylinders

ABS Modulator Relays

Power Brake Boosters

Brake Caliper Bolt and Pins

Brake Self Adjuster Kits

ABS Relays

Brake Master Cylinders

Brake Hoses

Brake Hardware Kits

ABS Harness Connectors

Master Cylinder Caps and Gaskets

Brake Hose To Caliper Bolt Washers

Brake Hose Bolts

Brake Proportioning Valves

Power Brake Booster Check Valves

ABS Wheel Sensor Brackets

Brake Pressure Modulator Pump Motor Connectors

ABS Control Module Bolts

Brake Caliper Kits

Parking Brake Switches

Air Brake Dryer Connector

Power Brake Booster Pressure Sensor Connector

Essential Brake Parts for 1992 Buick Park Avenues

from

$8.29

Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$47.30

Booster Check Valve

from

$56.99

This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.

Product Features:

Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
Strict specifications – made to meet rigorous SAE International standards

from

$23.99

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels
Helps deliver a quieter, more efficient braking system

from

$19.99

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$53.99

Carquest Premium brake drums meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium drums are manufactured with proper harmonic design and balancing to help eliminate noise and vibration. Our drums are manufactured to the original dimensional specifications for proper fit and performance. Carquest Premium brake drums are designed for long-lasting and quiet braking with superior performance.

Product Features:

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Proper harmonic design and balance helps to reduce brake noise and vibration
Optimal metallurgy and casting thickness to preventing warping

from

$25.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$4.49

These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$2.29

This brake hydraulic hose caliper bolt washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake hydraulic hose caliper bolt washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$1.79

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$7.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Our parts are 100% tested to verify both mechanical and electrical switching performance.
Decades of industry leading research and development focused on meeting the technician’s needs
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$43.99

Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:

Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
OE Style, stainless steel pad abutment hardware included
100% end-of-line inspection and pressure testing ensures quality and performance
Caliper finish or coating may vary

from

$40.99

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

Wearever Brake Shoes come bonded or riveted based on OE design.
Wearever Brake Shoes are coated to prevent rust.
Wearever Brake Shoes are 100% New not remanufactured.
Brand may vary by location

from

$7.49

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance. Industry experts agree – When brake friction materials are ready to be replaced, the hardware should also be replaced.

Product Features:

This part matches Original Equipment (OE) quality specifications
Contains all the necessary hardware for easy installation
Manufactured to restrain high tolerances with quality materials
Helps deliver a quieter, more efficient braking system
Restores brakes to like-new performance

from

$9.99

This brake hydraulic hose lock clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake hydraulic hose lock clip matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$67.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$102.57

ACDelco Professional DuraStop Brakes are the most thoroughly, independently tested brakes on the aftermarket and are designed to help resist corrosion and premature wear. ACDelco submits its brake products through a range of test methods, including D3EA®, along with Noise/Vibration/Harshness (NVH) and durability/wear testing. This allows us to deliver the high-quality product that an ACDelco customer expects. No manufacturer tests or audits its replacement brake products to the level of ACDelco. Dual Dynamometer Differential Effectiveness Analysis (D3EA®) and SAE J2784.

Product Features:

No machining required – ready to be installed right out of the box
Rust-preventative coating
Mill-balanced for proper rotor function
Quality validated for proper metallurgy and correct brake plate thickness
Non-directional brake surface finish for consistent braking
Chamfer angle follows the OE design
(D3EA®) and SAE J2784 testes and approved
Noise/Vibration/Harshness (NVH) and durability/wear tested

from

$61.99

This brake proportioning valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this brake proportioning valve is designed to match the fit and function of the original valve on specified vehicles.
Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$62.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$46.97

ACDelco Brake Hydraulic Hoses are quality reinforced hoses that carry fluid to transmit force within the hydraulic brake system. Each brake hose contains double-crimped fittings to provide longer service life and durability. The ACDelco Professional Brake Hydraulic Hose is a high quality replacement component for your vehicle’s braking system.

Product Features:

Includes OE features such as brackets, grommets, molded plastic guards, and wire clips to provide correct fit and easy installation
Premium brass fittings provide an excellent hydraulic seal
Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety

from

$47.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$154.99

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
All units are 100% tested to ensure reliable performance.
Guaranteed fit and function.

from

$163.99

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:

This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Multi-Layer rubberized shims provide virtually noise-free braking
Drilled & Slotted performance rotors provide maximum cooling
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Bolt-on upgrade for stock brakes, no modifications necessary
Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
Rotors are zinc plated for maximum protection against rust.
Buy with confidence from the originator & industry leader of brake kits
Buy with confidence from the originator & industry leader of brake kits

from

$39.99

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

Professional appearance – this electrical pigtail is designed for a clean, professional look when installed.
Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
Versatile component – this connector can be used in a variety of repairs and custom installations

from

$22.99

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

Wheel cylinders match what was originally installed on the vehicle.
Each cylinder matches OE for form, fit and function and material
Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
All bleeder screws are coated providing extra protection
Rubber components are manufactured in house using the latest formula EPDM material.
Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
All casting machining is done by computer programed CNC machines.
Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.

from

$16.79

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the Life Span and Improves the Performance of the Drum Brakes
Manufactured with quality materials to suppress high stress levels
Corrosion resistant coating for long-lasting durability against harsh roads

from

$53.99

Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:

Application-specific friction formulations provide shorter stopping distances and extended pad life
Hardware included for most applications
OE-designed slots and chamfers to reduce noise and vibration
Multi-layer shim provides near silent braking
Powder-coated backing plate prevents corrosion

from

$9.49

This brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles.
Restores functionality – reliable replacement for an original part that is missing or failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Upgrade your 1992 Buick Park Avenue with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1992 Buick Park Avenue, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Brake Parts are key to keeping your Park Avenue functioning at its best. At Advance Auto Parts, we offer a wide selection of 67 Brake Parts for the 1992 Buick Park Avenue, designed to meet your needs without breaking the bank. From Brake Rotors and Drum replacements to Brake Calipers upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1992 Buick Park Avenue at great prices. Our Brake Parts inventory for this model ranges from just $1.29 to $163.99, with an average price of $37.00. Our 67 Brake Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 1992 Buick Park Avenue without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 Buick Park Avenue, we stock popular OEM and aftermarket Brake Parts from top names like ACDelco, Dorman, Carquest, and more. ACDelco Brake Parts start at just $24.99 and boast an impressive 5 stars average rating from customers. Dorman and Carquest also bring quality to the table, with Brake Parts available starting at $1.29, and at an average 4 stars rating. With 867 customer reviews and counting, our 1992 Buick Park Avenue Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1992 Buick Park Avenue is always ready to roll. We’re committed to providing you with everything you need to keep your Park Avenue in top shape, all in one place. Start shopping confidently below for your 1992 Buick Park Avenue!

Best-Selling Brake Rotors and Drums for 1992 Buick Park Avenues

Enhance the driving experience in your Buick with 7 quality Brake Rotors and Drum components, starting at $53.99.

show more show less

from

$53.99

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Proper harmonic design and balance helps to reduce brake noise and vibration
Optimal metallurgy and casting thickness to preventing warping

from

$71.99

Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Matches OE vane size for proper cooling
Optimal metallurgy and casting thickness to preventing warping
Air gap eliminates brake fade and increases pad life
Non-directional finish decreases break-in time.

from

$71.56

ACDelco Advantage brake rotors and drums feature the fit, form and function of premium aftermarket brakes at a more economical price. The ACDelco Advantage line offers dependability, performance and great value – without sacrificing important features and benefits.

Product Features:

No machining required – ready to be installed right out of the box
Rust-preventative coating
Mill-balanced for proper rotor function
Quality validated for proper metallurgy and correct brake plate thickness
Non-directional brake surface finish for consistent braking
Chamfer angle follows the OE design

from

$77.10

No machining required – ready to be installed right out of the box
Rust-preventative coating
Non-directional brake surface finish for consistent braking
Chamfer angle follows the OE design

from

$102.57

No machining required – ready to be installed right out of the box
Rust-preventative coating
Mill-balanced for proper rotor function
Quality validated for proper metallurgy and correct brake plate thickness
Non-directional brake surface finish for consistent braking
Chamfer angle follows the OE design
(D3EA®) and SAE J2784 testes and approved
Noise/Vibration/Harshness (NVH) and durability/wear tested

from

$77.65

WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:

High metallurgical and machining standard to improve stopping distances
Produced to match OE design fitment – G 3000 gray iron
Mill balanced
TS16949 certified
Non-directional finish provides smooth vibration free performance
No need for machining prior to installation
Durable Metallurgic-Gray finish to all outward non-friction surfaces
Metallurgic-Gray anti-rust protection to help maintain a clean appearance
Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
Designed to minimize brake fade and extend pad and rotor life
24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins

from

$98.37

Bosch rotors utilize innovative materials that ensure the very highest quality – and prevent brake judder, noise, vibration and harshness. Bosch QuietCast Premium Disc Brake Rotors utilize vehicle specific castings. The heat flow casting process produces superior G3000, GG20, GG15 and HC (high carbon) casting. Bosch castings provide strength and durability not found in competitive product. While competitors may provide a low cost product which helps save money, their castings can crack and provide poor durability. Bosch QuietCast provides consistent, safe and long lasting performance. Alutherm 80 Coating – Bi-metal aluminum and zinc clean-look coating/Alutherm 80 extends the life of the rotor and provides a clean look for today’s open wheels

Product Features:

OE-Equivalent and a direct fit replacement
Prevent rust and corrosion with clear-look coating protection
Provide a clean look for today’s open-wheeled vehicles
Are 100% balanced for smooth operation
Factory-engraved edge code and minimum thickness specifications Bosch QuietCast Brake Rotors Brochure

Most Popular 1992 Buick Park Avenue Brake Calipers

Customize your Buick with 6 Brake Calipers products like Front Brake Calipers and Brake Caliper Bolt and Pins, all priced under $90.02.

show more show less

from

$90.02

ACDelco Professional Reman Loaded Disc Brake Calipers use both aluminum and iron castings, making them the ideal high quality aftermarket replacement for many vehicles on the road today. These loaded calipers contain Ethylene Propylene (EPDM) rubber components to provide superior resistance to heat, corrosion, and leakage. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. ACDelco Professional Reman Loaded Disc Brake Calipers are developed with Professional brake pads already attached – no assembly is required. Also included are bleeder screws, copper sealing washers, hardware, and mounting brackets for easy installation. These premium aftermarket reman loaded disc brake calipers are manufactured to fit a wide range of vehicles and will provide the same performance, durability, and service life you expect from ACDelco.

Product Features:

Pressure tested to ensure safe and confident braking
Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
Pre-lubed and loaded with quality friction pads for smooth operation

from

$43.99

Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
OE Style, stainless steel pad abutment hardware included
100% end-of-line inspection and pressure testing ensures quality and performance
Caliper finish or coating may vary

from

$43.99

Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
OE Style, stainless steel pad abutment hardware included
100% end-of-line inspection and pressure testing ensures quality and performance
Caliper finish or coating may vary

from

$42.39

ACDelco Professional Reman Friction Ready Disc Brake Calipers use both aluminum and iron castings, making them the ideal high quality aftermarket replacement. These unloaded calipers contain Ethylene Propylene (EPDM) rubber components to provide superior resistance to heat, corrosion, and leakage. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. ACDelco Professional Reman Friction Ready Disc Brake Calipers are developed without attached brake pads, allowing customization for the application at hand. Bleeder screws, copper sealing washers, hardware, and mounting brackets are all included for easy installation. These premium aftermarket replacement reman friction ready disc brake calipers are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Pressure tested to ensure safe and confident braking
Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
Developed without attached brake pads for customization

from

$23.99

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels
Helps deliver a quieter, more efficient braking system

from

$19.99

An axle disc hardware kit with pins (upper/lower or inner/outer) that the caliper slides on. Replace old corroded pins and bolts which can hamper caliper movement and cause unnecessary and uneven pad wear.

Top Picks for 1992 Buick Park Avenue Brake Pads and Shoes

Upgrade Buick Park Avenues with top-quality Brake Pads and Shoes parts, including 6 OEM and aftermarket selections for your 1992 model.

show more show less

from

$39.99

Wearever Brake Shoes come bonded or riveted based on OE design.
Wearever Brake Shoes are coated to prevent rust.
Wearever Brake Shoes are 100% New not remanufactured.
Brand may vary by location

from

$31.99

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

Dependable stopping power
Singler layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$75.81

Wagner® QuickStop® brake shoes utilize professional-grade friction materials that mirror original equipment and utilize OE-required riveted or bonded configurations.

Product Features:

Precision ground maximizes friction-to-drum contact
Attached levers and pins included to match OE (on specific applications)
Comprehensive coverage for foreign and domestic nameplates
Install Wagner with total confidence

from

$45.02

Dual Technology Ceramic (DTC) – Low Noise – Low Dust WBR ceramic brake pads are specially formulated for driving conditions that require superior friction effectiveness without compromising low noise or low dust characteristics. The advanced ceramic formulation mitigates wheel dust, brake fade, low speed and high heat squeal, at the same time providing positive pedal feel and long-life. Every WBR ceramic brake pad comes with a platform specific shim and has a burnished contact surface (scorched) just like OEM pads to ensure easy break-in and proper long-term functionality. Advanced Material Platform Specific Brake Pad Shims: To effectively combat brake squeal, WBR utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. This platform specific advanced material shim design is included with every WBR brake pad.

Product Features:

Original Equipment Performance
Solid Pedal Feel With Smooth Braking Performance
Ultra-Quiet Ceramic Formulation
Low Dust – Long Life
Advanced Material Platform Specific Shims
Scorched for Easy Break In
Positive Mold Construction
All WBR Pads are 100% Shimmed

from

$41.99

The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:

PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
The pad surfaces are thermal scorched for fast break-in
Includes premium stainless-steel hardware for hassle free installation
Multi-Layer rubberized shims provide virtually noise-free braking
Includes Premium hardware for easy installation

from

$35.99

The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:

Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
Positive mold technology for consistent wear and performance
Thermal scorched pad surface for a fast break-in
Chamfered and slotted to ensure noise-free braking
Powder coated backing plate resists rust and corrosion to provide extended pad life
Multi-Layer rubberized shims provide virtually noise-free braking

In-Demand Brake Hoses for 1992 Buick Park Avenues

Select from 10 premium Brake Hoses parts for your 1992 Buick Park Avenue, with prices ranging from $1.99 to $22.99.

show more show less

from

$8.49

This brake hydraulic hose to caliper bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake hydraulic hose to caliper bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.99

Direct replacement – this brake hydraulic hose caliper bolt washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$20.99

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$9.99

Direct replacement – this brake hydraulic hose lock clip matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.99

Direct replacement – this brake hydraulic hose to caliper bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.29

Direct replacement – this brake hydraulic hose caliper bolt washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$20.99

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$11.49

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A Brake Hose Banjo Bolt or Inlet Bolt are perforated hollow bolts that allow brake fluid transfer.

Product Features:

This part matches Original Equipment (OE) quality specifications
Manufactured with quality materials to suppress high stress levels
Corrosion resistant coating for long-lasting durability against harsh roads

from

$22.99

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$1.99

This part matches Original Equipment (OE) quality specifications
Manufactured with quality materials to suppress high stress levels
Corrosion resistant coating for long-lasting durability against harsh roads

Most Sold 1992 Buick Park Avenue Brake Kits

Explore our best-selling Buick parts for the 1992 Park Avenue among 7 OEM and aftermarket options starting from $7.49.

show more show less

from

$7.79

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Prevents noise and premature wear
Provides longer brake life and performance

from

$7.49

This part matches Original Equipment (OE) quality specifications
Contains all the necessary hardware for easy installation
Manufactured to restrain high tolerances with quality materials
Helps deliver a quieter, more efficient braking system
Restores brakes to like-new performance

from

$12.49

This part matches Original Equipment (OE) quality specifications
Increases the Life Span and Improves the Performance of the Drum Brakes
Manufactured with quality materials to suppress high stress levels
Corrosion resistant coating for long-lasting durability against harsh roads

from

$16.79

This part matches Original Equipment (OE) quality specifications
Increases the Life Span and Improves the Performance of the Drum Brakes
Manufactured with quality materials to suppress high stress levels
Corrosion resistant coating for long-lasting durability against harsh roads

from

$8.29

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$163.99

This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Multi-Layer rubberized shims provide virtually noise-free braking
Drilled & Slotted performance rotors provide maximum cooling
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Bolt-on upgrade for stock brakes, no modifications necessary
Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
Rotors are zinc plated for maximum protection against rust.
Buy with confidence from the originator & industry leader of brake kits
Buy with confidence from the originator & industry leader of brake kits

from

$8.27

Brake Hardware Kit

Top-Rated Brake Parts Brands For Your 1992 Buick Park Avenue

Shop for the best-rated brands offering Brake Parts and other products for your 1992 Buick Park Avenues. Below you’ll find some of our best rated Brake Parts from ACDelco, Dorman, and Carquest, and more. Brake Parts from these brands that fit a 1992 Park Avenue start at just $1.29 and are rated as high as 5 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular ACDelco 1992 Buick Park Avenue Brake Parts

When it comes to maintaining or upgrading your 1992 Buick Park Avenue, using quality Brake Parts is essential to ensure durability and a perfect fit. ACDelco ticks all of those boxes. We offer a wide selection of ACDelco Brake Parts, specifically designed for the 1992 Buick Park Avenue. With over 12 ACDelco brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $24.99, with an average price of just $64.30. Plus, with over 2 customer reviews and an average rating of 5 stars, you can trust that our ACDelco Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$48.49

This product is not rated

Black Multi-Purpose Pigtail

“”

from
$39.99

This product is not rated

Power Brake Booster Vacuum Check Valve Kit with Check Valve and Grommet

“”

from
$71.56

This product is not rated

Advantage Non Coated Brake Disc (Rotor)

“”

Popular Dorman 1992 Buick Park Avenue Brake Parts

Dorman auto parts is one of the highest quality Brake Part brands in the market. Any 1992 Buick Park Avenue owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1992 Park Avenue, Advance Auto Parts carries a full inventory of 11 Dorman Brake Parts. Plus you will be keeping your Buick in peak condition while saving money because prices on these Dorman Brake Parts range from $1.29 to $61.99, plus, with more than 39 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Brake Parts below will deliver on both quality and value.

from
$3.99

This product is not rated

Banjo Bolt M10-1.5 X 23

“”

from
$2.29

This product is not rated

Banjo Bolt Washer 10.3mm X 16.9mm

“”

from
$4.49

This product is not rated

Body Bolt – M6-1.0 X 25mm

“”

FAQs for 1992 Buick Park Avenue Brake Parts

Which Brake Parts are best-sellers for 1992 Buick Park Avenues?

Out of 67 Brake Parts that fit 1992 Buick Park Avenues, the following parts are the top sellers:

Body Bolt – M6-1.0 X 25mm (11910833) – $4.49
Brake Hose Bolts M10-1.5 X 22.8mm (5012759) – $8.49
Brake Hose Washer – Id 10.3mm, Od 16.91mm, Thickness 1.2mm (5706386) – $5.99

What’s the price range for 1992 Buick Park Avenue Brake Parts?

Brake Part prices for the 1992 Buick Park Avenue start at $1.29 and go up to $163.99 for the most premium parts.

What’s the average price of a Brake Part for a 1992 Buick Park Avenue?

The average price for Brake Parts for the 1992 Buick Park Avenue is $37.00. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other Buick Park Avenue model years?

Yes, we currently carry Brake Parts for 15 model years of Buick Park Avenues between 1989 and 2005. Brake Parts are bought most frequently for the following model years: 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, and 1997.

What are the cheapest Brake Parts for my 1992 Buick Park Avenue?

The cheapest 1992 Buick Park Avenue Brake Parts we carry in stock are:

Body Bolt With Washer – M6-1.0 X 25mm (Sold by each) (22141637) – $1.29
Panel Trim Retainer – Interior – GM/Chrysler/AMC (5029937) – $1.79
Inlet Bolt (sold by each) (10863799) – $1.99
Banjo Bolt Washer 10.3mm X 16.9mm (22972282) – $2.29
Banjo Bolt M10-1.5 X 23 (22972457) – $3.99

What are the top-rated Brake Parts that fit the 1992 Buick Park Avenue?

Out of 867 reviews by customers, our 1992 Buick Park Avenue Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1992 Buick Park Avenue and their top-rated products:

Brake Rotors and Drums
- Brake Drum: Meets or Exceeds OE Specs (5672457) – $53.99
- Brake Rotor: Meets or Exceeds OE Specs (3641872) – $71.99
Wheel Cylinders
- Brake Drum: Meets or Exceeds OE Specs (5672457) – $53.99
- Brake Rotor: Meets or Exceeds OE Specs (3641872) – $71.99

What types of Brake Parts do you sell for my 1992 Buick Park Avenue?

As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1992 Buick Park Avenue:

Can I get help with 1992 Buick Park Avenue Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Brake Parts and more.

What is your return policy for Buick Park Avenue Brake Parts?

Advance Auto Parts keeps returns simple. For new Buick Park Avenue Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1992 Buick Park Avenue Brake Parts

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.41071)

ACDelco – Booster Check Valve (Part No.N4030595315ACD)

Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 24 mm; 36 mm Bore (Part No.MCA39580)

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5053)

Driveworks – A/C and Heater Relay (Part No.83264)

Carquest Wearever – Brake Drum: Meets or Exceeds OE Specs (Part No.YH140451)

Carquest Premium – Multi Purpose Relay (Part No.RAA1267)

Dorman – Body Bolt – M6-1.0 X 25mm (Part No.963-232D)

Dorman – Banjo Bolt Washer 10.3mm X 16.9mm (Part No.484-180.1)

Dorman – Panel Trim Retainer – Interior – GM/Chrysler/AMC (Part No.45490)

Carquest – Parking Brake Switch (Part No.S998)

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.18-4355)

Carquest Wearever – Brake Shoes (Part No.S564)

Carquest Wearever – Drum Brake Hardware Kit (Part No.7203)

Dorman – Help – Brake Line Retaining Clips (Part No.13987)

ACDelco – 4-Way Male Gray Multi-Purpose Pigtail (Part No.PT1373)

ACDelco – Professional DuraStop Coated Brake Disc (Rotor) (Part No.N1000577604ACD)

Dorman – Brake Proportioning Valve (Part No.905-962)

ACDelco – Gray Multi-Purpose Pigtail (Part No.PT1798)

ACDelco – Professional DuraStop Hydraulic Brake Hose Assembly (Part No.N7000596817ACD)

ACDelco – 3-Way Male White Multi-Purpose Pigtail (Part No.PT1035)

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-74820)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K1532)

Dorman – Multipurpose Pigtail (Part No.645-589)

Carquest Wearever – WHEEL CYLINDER (Part No.WCA37855)

Carquest Wearever – Drum Brake Self-Adjuster Repair Kit (Part No.2629)

Carquest Premium Gold – Brake Pads: With Hardware, Semi-metallic, Long Life and Quiet (Part No.GMKD623)

Dorman – Help – Master Cylinder Caps (Part No.42042)

Carquest Wearever – Brake Drum: Meets or Exceeds OE Specs (Part No.YH140451)

Carquest Wearever – Brake Rotor: Meets or Exceeds OE Specs (Part No.YH141868)

ACDelco – Advantage Non Coated Brake Disc (Rotor) (Part No.N1000577605ACD)

ACDelco – Advantage Brake Drum (Part No.N2000593886ACD)

ACDelco – Professional DuraStop Coated Brake Disc (Rotor) (Part No.N1000577604ACD)

WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000322293WBC)

Bosch – QuietCast Premium Brake Disc (Rotor) (Part No.N1000322293BOS)

ACDelco – Professional Brake Caliper Assembly with Pads (Loaded), Remanufactured (Part No.N1040593117ACD)

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.18-4354)

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.18-4355)

ACDelco – Professional DuraStop Friction Ready Brake Caliper – Remanufactured (Part No.N1040577764ACD)

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5053)

Wagner – Brake Caliper Bolt/Pin (Part No.H5060)

Carquest Wearever – Brake Shoes (Part No.S636)

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD505)

Wagner – Brake QuickStop Drum Brake Shoe Set (Part No.N2010978273WAG)

World Brake Resources – Ceramic Brake Pads (Part No.N1010417753WBR)

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware (Part No.17-505)

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-505)

Dorman – Help – Brake Hose Bolts M10-1.5 X 22.8mm (Part No.13940)

Dorman – Help – Brake Hose Washer – Id 10.3mm, Od 16.91mm, Thickness 1.2mm (Part No.66223)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38253)

Dorman – Help – Brake Line Retaining Clips (Part No.13987)

Dorman – Banjo Bolt M10-1.5 X 23 (Part No.484-205.1)

Dorman – Banjo Bolt Washer 10.3mm X 16.9mm (Part No.484-180.1)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38262)

Carquest Wearever – Brake Hydraulic Banjo Bolt (Part No.H9458)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38951)

Carquest Wearever – Inlet Bolt (sold by each) (Part No.301H5375)

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8209A)

Carquest Wearever – Drum Brake Hardware Kit (Part No.7203)

Carquest Wearever – Drum Brake Self-Adjuster Repair Kit (Part No.2628)

Carquest Wearever – Drum Brake Self-Adjuster Repair Kit (Part No.2629)

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.41071)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K1532)

Autopart International Inc – Brake Hardware Kit (Part No.N10611926015API)