1991 Volkswagen Golf Belts and Hoses
More 1991 Volkswagen Golf Belts and Hoses Categories
If you’re looking for an original Belts and Hoses replacement for a 1991 Volkswagen Golf, you can search through our selection below. You’ll also find aftermarket and OEM Belts and Hoses to meet your needs.
Essential 1991 Volkswagen Golf Belts and Hoses
Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 6 Inch Length (Part No.80411)
from
$7.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- Meets Type EC electro-chemical requirements as specified in SAE J1684
Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 15 1/2 Inch Length (Part No.88439)
from
$30.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Dorman – Idler/Tensioner Pulley: Specific Fit, Plastic, 65 mm Diameter (Part No.419-665)
from
$39.49
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.
Product Features:
See More
Product Features:
- Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
- Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
- Application specific – reverse engineered from the original design on certain vehicle years, makes and models
- Trustworthy quality – backed by team of engineers and quality specialists in the United States
Dorman – Idler/Tensioner Pulley: Specific Fit, Plastic, 73.15 mm Diameter (Part No.419-702)
from
$46.49
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.
Product Features:
See More
Product Features:
- Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
- Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
- Application specific – reverse engineered from the original design on certain vehicle years, makes and models
- Trustworthy quality – backed by team of engineers and quality specialists in the United States
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.33" Diameter (Part No.D71657)
from
$39.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Rein – Radiator Hose (Part No.CHR0440)
from
$10.49
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.
Product Features:
See More
Product Features:
- Reduces installation time.
- No cutting, refitting or adjusting the hose.
- Prevents leaks and comebacks from reusing old quick connectors and o-rings.
- Resistant to heat, salt, road debris, oil and other contaminants.
Rein – Radiator Hose (Part No.CHR0613)
from
$94.99
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.
Product Features:
See More
Product Features:
- Reduces installation time.
- No cutting, refitting or adjusting the hose.
- Prevents leaks and comebacks from reusing old quick connectors and o-rings.
- Resistant to heat, salt, road debris, oil and other contaminants.
Meyle – Oil Cooler Hose (Part No.A6200123978MEY)
from
$30.57
Oil Cooler Hose
Vaico – Oil Cooler Hose (Part No.A620028383VCO)
from
$5.92
Oil Cooler Hose
Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)
from
$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
CRP – Hose – Fuel (Part No.4L30010809CRP)
from
$233.30
Hose – Fuel
CRP – Hose – Fuel (Part No.4L30010817CRP)
from
$486.90
Hose – Fuel
CRP – Fuel Hose (Part No.E5000859948CRP)
from
$110.20
Fuel Hose
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (Part No.80402)
from
$23.49
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- Meets Type EC electro-chemical requirements as specified in SAE J1684
Gates – Premium Molded Heater Hose (Part No.18030)
from
$16.79
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
Product Features:
See More
Product Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Straight Heater Hose: EPDM, Direct Fit, 0.25" Inside Diameter (Sold by foot) (Part No.28407)
from
$0.99
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- CAUTION: Do not use for fuel or oil transfer applications
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Gates – Premium Molded Coolant Hose (Part No.22884)
from
$32.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (Sold by foot) (Part No.28411)
from
$1.49
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- CAUTION: Do not use for fuel or oil transfer applications
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Febi – Molded Radiator Hose (Part No.G2000240566FEB)
from
$82.39
Febi engine cooling products are designed and manufactured to exceed original equipment (OE) specifications and are engineered to operate in the highly-stressful environment of today’s higher performance cooling systems. The Febi line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.
Product Features:
See More
Product Features:
- All cooling-water hose inner linings are resistant to electrochemical cracking
- high strength and resistance to oil, mud, salt, road debris, and ozone
- Resistance to distilled water and water ethylene glycol mixtures
- Resistance to air temperatures of up to 125C
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10" Long, 1.25" Diameter (Part No.C72658)
from
$24.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Rein – Water Pipe (Part No.CHE0199P)
from
$30.99
Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.
Product Features:
See More
Product Features:
- Reduces installation time.
- No cutting, refitting or adjusting the hose.
- Prevents leaks and comebacks from reusing old quick connectors and o-rings.
- Resistant to heat, salt, road debris, oil and other contaminants.
Rein – Water Hose (Part No.CHE0326P)
from
$22.99
Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.
Product Features:
See More
Product Features:
- Reduces installation time.
- No cutting, refitting or adjusting the hose.
- Prevents leaks and comebacks from reusing old quick connectors and o-rings.
- Resistant to heat, salt, road debris, oil and other contaminants.
ContiTech – Drive Belt (Part No.W1000861559CON)
from
$22.89
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Temperature-stable from -22F to 176F (30C to 80C).
- Delivers over 98% power efficiency.
- High performance construction.
- Polychloroprene rubber cover and body.
- Polyester fiber tensile members and a ribbed belt design.
Driveworks – Automotive V-Belt (Part No.34513)
from
$4.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
Product Features:
See More
Product Features:
- This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
- Polyester cords provide extreme tension-holding capability for longer belt life
- The raw edge belt design delivers the maximum gripping power
- The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
Driveworks – Automotive V-Belt, Driveworks (Part No.25013)
from
$4.99
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
Product Features:
See More
Product Features:
- This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
- Polyester cords provide extreme tension-holding capability for longer belt life
- The raw edge belt design delivers the maximum gripping power
- The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
APA/URO Parts – C Clip Retainer (Part No.G2050240713APA)
from
$1.30
C Clip Retainer
Popular 1991 Volkswagen Golf Belts and Hoses Categories
1991 Volkswagen Golf Belts and Hoses
You count on your 1991 Volkswagen Golf to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 49 Belts and Hoses ranging in price from $1.30 to $596.98, you’re sure to find everything you need for your 1991 Volkswagen Golf.
Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 12 different brands like Dayco, Imperial, and Rein. 1991 Volkswagen Golf Belts and Hoses start as low as $1.30!
One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 202 extensive product reviews on 1991 Volkswagen Golf Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Automotive V-Belt with 3.3 stars and Automotive V-Belt with 1.5 stars.
Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 1991 Volkswagen Golf below to get started!
Top-Rated Belts and Hoses Brands For Your 1991 Volkswagen Golf
Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1991 Volkswagen Golf running right for years to come. In our inventory you’ll find brands like Dayco, Imperial, Rein, and even more.
Popular Dayco Belts and Hoses
You’ll find popular Dayco brand products across Engine Cooling Hoses and Serpentine and V Belts. All are waiting to get your 1991 Volkswagen Golf back on the road. Some of the top-rated Dayco products in these categories are:
from
$30.99
(2)
Flex Radiator Hoses; EPDM Rubber, 2 Inch Long, 1.25 Inch Inner Dia.
Upper Radiator Hoses
from
$21.99
(8)
Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia.
Coolant Hoses
Top-Rated Dayco Belts and Hoses
If Dayco are what you’re looking for, our inventory holds plenty. We stock Dayco brand Belts and Hoses for your 1991 Volkswagen Golf, and some of our most reviewed Dayco parts include:
from
$31.49
(13)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.50" Long, 1.31" Diameter
Coolant Hoses
from
$27.49
(3)
Flex Radiator Hoses; EPDM Rubber, 11 Inch Long, 1.25 Inch Inner Dia.
Upper Radiator Hoses
from
$24.99
(1)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.22" Diameter
Lower Radiator Hoses
FAQs for 1991 Volkswagen Golf Belts and Hoses
What are the most purchased Belts and Hoses for the 1991 Volkswagen Golf?
Out of 49 Belts and Hoses for the 1991 Volkswagen Golf, the most popular in our inventory are:
from
$16.29
This product is not rated
Bottom Cog V-Belt; 37.5 Inch Long, Exact Fit Premium Quality
V-Belts
from
$14.99
This product is not rated
Bottom Cog V-Belt; 29 Inch Long, Exact Fit Premium Quality
V-Belts
What are the top-rated 1991 Volkswagen Golf Belts and Hoses?
Top-rated Belts and Hoses for your 1991 Volkswagen Golf based on customer reviews/ratings are:
from
$5.29
(3)
Automotive V-Belt
“It’s a belt! Nothing wrong with DriveRite belts, they are good quality.”
from
$5.29
(2)
Automotive V-Belt
“Does the job but for some reason these belt always squeak when I use them. I should have stayed with a goodyear belt”
