1991 Oldsmobile Toronado Belts and Hoses

Name: Flex Radiator Hoses; EPDM Rubber, 16.5 Inch Long, 2 Inch to 1.75 Inch Inner Dia.
Brand: Dayco
SKU: 81381
Price: 18.29 USD
Rating: 5.0 (1 reviews)

Below you will find various in-demand Oldsmobile Belts and Hoses, components and accessories for your 1991 Toronado. Advance Auto Parts has popular Toronado parts like Pulleys, Heater Hoses, Serpentine and V Belts and more. You’ll also find aftermarket and OEM Belts and Hoses for other Toronado model years including 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1992 and more. Select a category of 1991 Oldsmobile Toronado Belts and Hoses below and start saving instantly.

Popular 1991 Oldsmobile Toronado Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Belt Tensioner Pulleys

Heater Hose Fittings

Engine Oil Cooler Hoses

Fuel Injection Fuel Feed Hose Seals

Engine Oil Cooler Hose Seals

Essential Belts and Hoses for 1991 Oldsmobile Toronados

from

$18.29

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$31.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$21.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$30.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$53.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

The special belt construction eliminates noise, reduces tension loss and solves transmission problems.
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all original equipment manufacturer specifications.
It is recommended to replace the tensioner (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$65.99

The special belt construction eliminates noise, reduces tension loss and solves transmission problems.
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$12.99

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC) and the ??quick connect end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$27.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$20.79

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$24.79

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$31.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$14.99

This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$38.76

ACDelco Professional, premium aftermarket Molded Coolant Hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. They are specially designed, GM OE style factory-molded hoses to fit today’s smaller, tighter-fitting engine compartments. ACDelco Professional Molded Coolant Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and are approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded coolant hoses are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Has a heat and ozone resistant cover to increase the life of the hose
Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
Installs without buckling, bending out of shape, or straining at the connection for easy installation
Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles

from

$16.49

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$3.49

GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$7.29

GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These multi purpose seals help prevent leaks in various components of your vehicle. GM Genuine Parts are the true OE parts installed during the production or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps prevent leaks in various components of your vehicle
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$104.99

Litens was the Original Equipment (O.E.) supplier of this General Motors tensioner and offers this “OE Exact”* part for the aftermarket. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). The Litens aftermarket part includes an upgraded the lower structure and a revised internal stake to improve performance and life. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. Tensioner pre-attached to a large steel mounting plate.
Installation instructions included.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Professional Mechanics will change this tensioner in approx. 20 minutes to 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$131.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Meets or exceeds OE quality

from

$169.99

Litens was the Original Equipment (O.E.) supplier of this classic G.M. tensioner and offers this “O.E. Exact”* part for the aftermarket. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). This tensioner design includes an integrated tensioner mounted into a large aluminum bracket. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the one on the world’s largest original equipment tensioner suppliers to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Professional Mechanics will change this tensioner in approx. 20 minutes to 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$48.99

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

from

$59.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$6.99

This replacement HVAC heater hose fitting is engineered to match the fit and durability of the stock hose fitting on specified vehicles. It is designed to withstand extreme temperatures to ensure leak-free service.

Product Features:

Ideal replacement – this HVAC heater hose fitting directly replaces the original fitting on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperatures and deliver leak-free performance
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$13.99

Ideal replacement – this HVAC heater hose fitting directly replaces the original fitting on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperatures and deliver leak-free performance
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$49.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$20.29

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$14.99

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$22.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$28.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Materials specially designed to resist collapse in a vacuum
Designed to resist electrochemical degradation, which is the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transportation applications.

Upgrade your 1991 Oldsmobile Toronado with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1991 Oldsmobile Toronado, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Belts and Hoses are key to keeping your Toronado functioning at its best. At Advance Auto Parts, we offer a wide selection of 23 Belts and Hoses for the 1991 Oldsmobile Toronado, designed to meet your needs without breaking the bank. From Pulley replacements to Heater Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1991 Oldsmobile Toronado at great prices. Our Belts and Hoses inventory for this model ranges from just $3.49 to $104.99, with an average price of $32.13. Our 23 Belts and Hoses in stock come from 8 trusted brands, so you’re sure to find the right part for your 1991 Oldsmobile Toronado without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1991 Oldsmobile Toronado, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco DriveWorks, and more. Dayco Belts and Hoses start at just $23.99 and boast an impressive 4.5 stars average rating from customers. With 396 customer reviews and counting, our 1991 Oldsmobile Toronado Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1991 Oldsmobile Toronado is always ready to roll. We’re committed to providing you with everything you need to keep your Toronado in top shape, all in one place. Start shopping confidently below for your 1991 Oldsmobile Toronado!

Best-Selling Pulleys for 1991 Oldsmobile Toronados

Enhance the driving experience in your Oldsmobile with 3 quality Pulley components, starting at $30.99.

show more show less

from

$30.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$34.99

Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last with superior resistance to dirt, salt, chemicals, and other engine compartment contaminants.
Original equipment quality suitable for virtually all domestic and import vehicles in today’s fleet
Bearings meet or exceed OE standards with application-specific speed and load requirements to withstand high temperatures under the hood
High-quality bearings eliminate noise
Mounting hardware included for some popular applications
Reliable operation in severe conditions

from

$31.49

This pulley is manufactured by Litens Automotive the original equipment part supplier and the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty polymer construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Top Picks for 1991 Oldsmobile Toronado Serpentine and V Belts

Upgrade Oldsmobile Toronados with top-quality Serpentine and V Belts parts, including 3 OEM and aftermarket selections for your 1991 model.

show more show less

from

$32.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$53.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$65.99

The special belt construction eliminates noise, reduces tension loss and solves transmission problems.
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

In-Demand Belt Tensioners for 1991 Oldsmobile Toronados

Select from 1 premium Belt Tensioners parts for your 1991 Oldsmobile Toronado.

show more show less

from

$104.99

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. Tensioner pre-attached to a large steel mounting plate.
Installation instructions included.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Professional Mechanics will change this tensioner in approx. 20 minutes to 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

Most Sold 1991 Oldsmobile Toronado Radiator Hoses

Explore our best-selling Oldsmobile parts for the 1991 Toronado among 4 OEM and aftermarket options starting from $15.49.

show more show less

from

$23.99

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$20.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40°F (-40°C) to +257°F (+125°C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$38.76

Has a heat and ozone resistant cover to increase the life of the hose
Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
Installs without buckling, bending out of shape, or straining at the connection for easy installation
Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles

from

$15.49

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

Top-Rated Belts and Hoses Brands For Your 1991 Oldsmobile Toronado

Shop for the best-rated brands offering Belts and Hoses and other products for your 1991 Oldsmobile Toronados. Below you’ll find some of our best rated Belts and Hoses from Dayco and DriveWorks, and more. Belts and Hoses from these brands that fit a 1991 Toronado start at just $23.99 and are rated as high as 4.5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 1991 Oldsmobile Toronado Belts and Hoses

When it comes to maintaining or upgrading your 1991 Oldsmobile Toronado, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1991 Oldsmobile Toronado. With over 3 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $23.99, with an average price of just $36.32. Plus, with over 172 customer reviews and an average rating of 4.5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $53.99

(133)

Poly Rib Belt Serpentine Belt; 102.56 Long, 6 Rib Count

“Very good product”

from $30.99

(31)

Idler Pulley, Dayco

“Works pwrfect”

from $23.99

(8)

Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia.

“Exact fit for ’97 Acura CL 2.2.”

Popular DriveWorks 1991 Oldsmobile Toronado Belts and Hoses

DriveWorks auto parts is one of the highest quality Belts and Hose brands in the market. Any 1991 Oldsmobile Toronado owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 1991 Toronado, Advance Auto Parts carries a full inventory of 1 DriveWorks Belts and Hoses. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these DriveWorks Belts and Hoses range up to $32.99, plus, with more than 25 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $32.99

(25)

Poly Rib Belt Serpentine Belt; 102.56 Long, 6 Rib Count

“Excellant it made that rattle noise go away soon as the new belt got installed,great.”

FAQs for 1991 Oldsmobile Toronado Belts and Hoses

Which Belts and Hoses are best-sellers for 1991 Oldsmobile Toronados?

Out of 23 Belts and Hoses that fit 1991 Oldsmobile Toronados, the following parts are the top sellers:

1/2" x 12′ Engine Oil Cooler Hose (19230057) – $48.99
Flex Radiator Hoses; EPDM Rubber, 21.44 Inch Long, 1.5 Inch Inner Dia. (5191289) – $15.99
Metal Line Kit for Engine Oil Coolers (19230068) – $59.99

What’s the price range for 1991 Oldsmobile Toronado Belts and Hoses?

Belts and Hose prices for the 1991 Oldsmobile Toronado start at $3.49 and go up to $104.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1991 Oldsmobile Toronado?

The average price for Belts and Hoses for the 1991 Oldsmobile Toronado is $32.13. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Oldsmobile Toronado model years?

Yes, we currently carry Belts and Hoses for 25 model years of Oldsmobile Toronados between 1966 and 1992. Belts and Hoses are bought most frequently for the following model years: 1992, 1990, 1989, 1988, 1987, 1986, 1985, 1984, and 1983.

What are the cheapest Belts and Hoses for my 1991 Oldsmobile Toronado?

The cheapest 1991 Oldsmobile Toronado Belts and Hoses we carry in stock are:

Fuel Feed Pipe O-Ring (15730384) – $3.49
Heater Hose Fitting 5/8 In. Hose X 1 In. – 14 Uns X 2 In. Long (22972368) – $6.99
Oil Drain Plug Gasket (12518481) – $7.29
Heater Hose Connectors – 5/8 In. Hose X 1 In.-14 Uns X 2 In. Long Nipple – Metal (9110058) – $13.99
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.50" Long, 1.50" Diameter (5197910) – $14.29

What are the top-rated Belts and Hoses that fit the 1991 Oldsmobile Toronado?

Out of 396 reviews by customers, our 1991 Oldsmobile Toronado Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1991 Oldsmobile Toronado and their top-rated products:

Serpentine and V Belts
- Poly Rib Belt Serpentine Belt; 102.56 Long, 6 Rib Count (3290177) – $53.99
- Poly Rib Belt Serpentine Belt; 102.56 Long, 6 Rib Count (5062888) – $32.99
Radiator Hoses
- Poly Rib Belt Serpentine Belt; 102.56 Long, 6 Rib Count (3290177) – $53.99
- Poly Rib Belt Serpentine Belt; 102.56 Long, 6 Rib Count (5062888) – $32.99

What types of Belts and Hoses do you sell for my 1991 Oldsmobile Toronado?

As of 11/2/25, these are some of the most in-demand types of Belts and Hoses for a 1991 Oldsmobile Toronado:

Can I get help with 1991 Oldsmobile Toronado Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Belts and Hoses and more.

What is your return policy for Oldsmobile Toronado Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Oldsmobile Toronado Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1991 Oldsmobile Toronado Belts and Hoses

Dayco – Flex Radiator Hoses; EPDM Rubber, 16.5 Inch Long, 2 Inch to 1.75 Inch Inner Dia. (Part No.81381)

Gates – Premium Molded Coolant Hose (Part No.20687)

Dayco – Idler Pulley, Dayco (Part No.89001)

Dayco – Idler Pulley, Dayco (Part No.89010)

Gates – Micro-V Serpentine Drive Belt (Part No.K061031)

Gates – Micro-V Serpentine Drive Belt (Part No.K061025)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 60 Inch Length (Part No.80418)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 16 Inch Length (Part No.88358)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 24 Inch Length (Part No.80404)

Gates – Premium Molded Heater Hose (Part No.18423)

Dayco – Idler Pulley, Dayco (Part No.89006)

Dorman – Idler Pulley (Pulley only) (Part No.419-602)

ACDelco – Professional Molded Coolant Hose (Part No.G2000584211ACD)

Dayco – Flex Radiator Hoses; EPDM Rubber, 19 Inch Long, 2 Inch to 1.75 Inch Inner Dia. (Part No.81391)

GM Genuine Parts – Fuel Feed Pipe O-Ring (Part No.217-452)

GM Genuine Parts – Oil Drain Plug Gasket (Part No.14090908)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999068A)

Dayco – Automatic Belt Tensioner, Dayco (Part No.89249)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999042A)

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Dorman – Heater Hose Fitting 5/8 In. Hose X 1 In. – 14 Uns X 2 In. Long (Part No.500-048.1)

Dorman – Help – Heater Hose Connectors – 5/8 In. Hose X 1 In.-14 Uns X 2 In. Long Nipple – Metal (Part No.56359)

Gates – Premium Molded Coolant Hose (Part No.20980)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 26" Long, 1.25" Diameter (Part No.E71085)

Dayco – Flex Radiator Hoses; EPDM Rubber, 19.5 In. Long, 1.75 In. to 1.5 In. Inner Dia. (Part No.81261)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 25" Long, 1.50" Diameter (Part No.E70867)

Gates – Premium Molded Coolant Hose (Part No.20543)

Dayco – Idler Pulley, Dayco (Part No.89010)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38027)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 82mm Diameter (Part No.900021A)

Dorman – Help – Heater Hose Connectors – 5/8 In. Hose X 1 In.-14 Uns X 2 In. Long Nipple – Metal (Part No.56359)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 16 Inch Length (Part No.88358)

Dorman – Heater Hose Fitting 5/8 In. Hose X 1 In. – 14 Uns X 2 In. Long (Part No.500-048.1)

Driveworks – Poly Rib Belt Serpentine Belt; 102.56 Long, 6 Rib Count (Part No.1025K6)

Dayco – Poly Rib Belt Serpentine Belt; 102.56 Long, 6 Rib Count (Part No.5061025)

Gates – Micro-V Serpentine Drive Belt (Part No.K061025)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999068A)

Dayco – Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia. (Part No.81051)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, .63" Diameter (Part No.A71624)

ACDelco – Professional Molded Coolant Hose (Part No.G2000584211ACD)

Gates – Premium Molded Heater Hose (Part No.18801)