1991 Jeep Grand Wagoneer Performance and Racing Products

Please Select your Vehicle to See Exact Fit Parts

Essential Performance and Racing Products for 1991 Jeep Grand Wagoneers

Russell – Russell Speed Bleeder, Thread Size – 3/8-24 in. RH, 639590 (Part No.639590)

Russell Speed Bleeder, Thread Size - 3/8-24 in. RH, 639590

from

$27.49
Russell Speed Bleeder, Thread Size – 3/8-24 in. RH, 639590.
See More

Edelbrock – Edelbrock Performer-Link Adjustable True-Roller Timing Chain Set, 7818 (Part No.7818)

Edelbrock Performer-Link Adjustable True-Roller Timing Chain Set, 7818

from

$130.99
Edelbrock part No: 7818 Performer-Link timing chain is for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Cam sprockets are made from 35,000 psi tensile strength cast iron. Crank sprockets are made from billet SAE-1144 steel and induction heat treated. Four Performer-Link sets are stock replacement parts and 50-state legal (see listings in bold type). All other sets have three keyway setting points to ensure accurate timing selection for early or late-model vehicles. Performer-Link timing sets are not for use above 6500 rpm. Performer roller chain sets are engineered to operate up to 6500 rpm. Never hammer directly on chain or sprockets. You can crack the hardened links and pins and cause early failures. Use a sleeve for installations that require hammering, a brass drift punch may be used if you carefully alternate blows on either side of the sprocket to avoid cocking. Never stretch the chain with a screwdriver. Check for clearance between the timing chain and block and between the chain and front cover before reassembly. Be sure that both cam and crank sprockets are exactly in line with each other. Misalignment can cause chain to break.
See More

Competition Cams – Competition Cams High Energy 218/218 Hydraulic Flat Cam and Lifter Kit, CL20-212-2 (Part No.CL20-212-2)

Competition Cams High Energy 218/218 Hydraulic Flat Cam and Lifter Kit, CL20-212-2

from

$382.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
See More

Edelbrock – Edelbrock Cylinder Head Gasket Set, 7329 (Part No.7329)

Edelbrock Cylinder Head Gasket Set, 7329

from

$113.99
“Edelbrock part No: 7329 head gasket is intended for AMC 304-401 CID V8 engines. This gasket comes as a set and has a 4.275″” bore size, .045″” compressed thickness and 10.6 cc volume. This gasket will fit the 304 AMC small bore applications even though the Edelbrock cylinder head will not. This head gasket is graphite with a steel core and has a stainless steel fire ring. Gasket is compatible with cast iron or aluminum cylinder heads.”
See More

B & M – B & M Transmission Cast Deep Pan, Brushed Finish Tf727 518&61848Re Cummins, 10280 (Part No.10280)

B & M Transmission Cast Deep Pan, Brushed Finish Tf727 518&61848Re Cummins, 10280

from

$363.99
Our Hi-Tek deep transmission pans are constructed from A356-T6 aluminum and are cast with thick internal and external fins, adding additional strength and increased cooling properties. The deep pan design increases fluid capacity by 4-quarts over the stock O.E. steel pan. All these features combined help dissipate heat quicker netting lower transmission and fluid temperatures prolonging the life of your transmission, transmission fluid and corresponding components. Other features for this popular pan include a filter, filter extension, gasket and drain port with magnetic drain plug for clean and easy servicing. Also includes a 1/8-inch NPT temperature sensor port for easily adding a temp gauge for monitoring transmission temperatures while daily driving, towing or racing. Includes detailed instructions with all necessary hardware for an easy at home installation. Fits all Chrysler, Dodge, Plymouth A727 (RH36, RH37) A518 (46RH, 46RE) A618 (47RH, 47RE, 48RE) automatic transmissions.
See More

PerTronix – PerTronix 9FO-1810 Module replacement (only) (one module) for 9FO-181 Ignitor II Kit (Part No.9FO-1810)

PerTronix 9FO-1810 Module replacement (only) (one module) for 9FO-181 Ignitor II Kit

from

$173.99
PerTronix 9FO-1810 Module replacement (only) (one module) for 9FO-181 Ignitor II Kit.
See More

Edelbrock – Edelbrock Performer Series Retainer, 9720 (Part No.9720)

Edelbrock Performer Series Retainer, 9720

from

$103.99
Edelbrock Valve Spring Retainers are made of superior quality steel and are machined and heat treated for maximum strength. They feature a black oxide finish to prevent rust and corrosion
See More

Competition Cams – "Competition Cams SUPER VALVE LOCKS, 3/8"" 1 ST, 612-16" (Part No.612-16)

"Competition Cams SUPER VALVE LOCKS, 3/8"" 1 ST, 612-16"

from

$43.99
Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights
See More

Energy Suspension – Energy Suspension Sway Bar Bushing Set, 2.5105R (Part No.2.5105R)

Energy Suspension Sway Bar Bushing Set, 2.5105R

from

$41.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar. Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
See More

Accel – Accel Spark Plug Wire Set – 8mm – Universal – Red Wire with Red Straight Boots – 5040R 8mm super stock universal fit spark plug wires feature a spi… (Part No.5040R)

Accel Spark Plug Wire Set - 8mm - Universal - Red Wire with Red Straight Boots - 5040R 8mm super stock universal fit spark plug wires feature a spi...

from

$116.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
See More

Mallory – Mallory Distributor Wiring Harness, 29349 (Part No.29349)

Mallory Distributor Wiring Harness, 29349

from

$35.49
3-wire for ignition box. PERFORMANCE PARTS>PERFORMANCE IGNITION/STARTING/CHARGING>IGNITION>IGNITION ACCESSORIES & OTHER from Mallory
See More

Accel – Accel Ignition Coil- SuperCoil- Dodge/Jeep/Plymouth/Chrysler Remote-Yellow-Individual – This SuperCoil ignition coil fits Dodge Magnum Truck / Jeep… (Part No.140021)

Accel Ignition Coil- SuperCoil- Dodge/Jeep/Plymouth/Chrysler Remote-Yellow-Individual - This SuperCoil ignition coil fits Dodge Magnum Truck / Jeep...

from

$84.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.
See More

Edelbrock – Edelbrock Pushrod Set, 9637 (Part No.9637)

Edelbrock Pushrod Set, 9637

from

$228.99
“Edelbrock part No: 9637 Pushrods are designed for AMC 343-401 V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise formed wedged ends for a high quality fit with the cup seats. A black oxide finish is added for corrosion resistance. Pushrod Specifications: – Outside Diameter: 5/16″” – Length: 8.050″””
See More

Edelbrock – Edelbrock Signature Series Valve Covers, 4431 (Part No.4431)

Edelbrock Signature Series Valve Covers, 4431

from

$79.99
The Edelbrock No: 4431 Signature Series Valve Covers are designed for AMC/Jeep 290-304-343-360-390-401 V8 ’67-91 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.
See More

Accel – Accel Distributor Cap And Rotor Kit, 8222 (Part No.8222)

Accel Distributor Cap And Rotor Kit, 8222

from

$31.99
Accel Distributor Cap And Rotor Kit, 8222.
See More

Edelbrock – Edelbrock Sure Seat Valve Springs, 5792 (Part No.5792)

Edelbrock Sure Seat Valve Springs, 5792

from

$157.99
The Edelbrock No: 5792 Sure Seat Valve Spring for Chrysler 383-400-413-440 V8 1969-79 O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.
See More

Yukon Gear – Yukon Gear Replacement Trail Repair Kit For Dana 30 And 44 With 1350 Size U/Joint And Straps, 32280 (Part No.32280)

Yukon Gear Replacement Trail Repair Kit For Dana 30 And 44 With 1350 Size U/Joint And Straps, 32280

from

$481.99
Yukon replacement trail repair kit for Dana 30 and 44 with 1350 size U/joint and straps. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).
See More

Mallory – Mallory Unilite Electronic Ignition Distributor Series 37, 3760001 (Part No.3760001)

Mallory Unilite Electronic Ignition Distributor Series 37, 3760001

from

$614.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
See More

Energy Suspension – Energy Suspension Leaf Spring Bushing Set, 2.2109G (Part No.2.2109G)

Energy Suspension Leaf Spring Bushing Set, 2.2109G

from

$90.99
Adds a dramatic amount of performance and durability to any vehicle. For cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
See More

Energy Suspension – Energy Suspension Tie Rod Dust Boot, 9.13101R (Part No.9.13101R)

Energy Suspension Tie Rod Dust Boot, 9.13101R

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
See More

Mr. Gasket – Mr. Gasket Thermocap Radiator Cap, 2471S (Part No.2471S)

Mr. Gasket Thermocap Radiator Cap, 2471S

from

$55.29
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
See More

Edelbrock – Edelbrock RPM AMC/ Jeep Cylinder Head With Exhaust Crossover Complete, 60139 (Part No.60139)

Edelbrock RPM AMC/ Jeep Cylinder Head With Exhaust Crossover Complete, 60139

from

$1544.99
Edelbrock RPM AMC/ Jeep Cylinder Head With Exhaust Crossover Complete, 60139.
See More

Edelbrock – Edelbrock Water Pump AMC Long Style 1973-Later, Prevents overheating, 8832 (Part No.8832)

Edelbrock Water Pump AMC Long Style 1973-Later, Prevents overheating, 8832

from

$365.99
“Edelbrock No. 8832 Water Pump AMC long style 1973-later ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “”super cooling”” Water Pumps to provide maximum flow, maximum pressure and equal distribution to both sides of the block within 1%. Available for most popular applications, these high performance pumps flow in only one direction for optimum efficiency. The casting’s computer-designed internal passages and precision powdered metal impeller produce the maximum flow rate possible.”
See More

Holley – Holley Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Dual Inlet, Shiny, 0-4412BKX (Part No.0-4412BKX)

Holley Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Dual Inlet, Shiny, 0-4412BKX

from

$799.99
Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!
See More

Holley – Holley 2 BBL Carbs, 0-4412S (Part No.0-4412S)

Holley 2 BBL Carbs, 0-4412S

from

$549.99
The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to push you to the finish line on Saturday night, the Holley 0-4412 Performance 2BBL is the perfect choice.
See More

B & M – B & M Torque Converter, Tork Master 2400, 10417 (Part No.10417)

B & M Torque Converter, Tork Master 2400, 10417

from

$478.99
The Tork Master 2400 fits 1967-81 Chrysler, Dodge, Plymouth Torqueflite A727 automatic transmissions (Non lock-up) with 24 spline input and a 10-inch bolt circle. Don’t let the exceptional value fool you into thinking Tork Master Converters are not packed with lots of quality features, making them the best value-priced street performance converters money can buy. These converters perform best when paired with stock to modified engines up to 350hp/350 ft lbs of torque, and lighter weight applications, like street rods. The Tork Master will provide noticeably quicker launches and harder acceleration while maintaining normal daily driving qualities. Upgrades like a new precision alloy steel pump drive tube, needle thrust bearing when factory equipped, new thrust washer between turbine and cover when required, and pressure tested and fully balanced by expertly trained technicians. Notes: Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. Not recommended for big block, supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product.
See More

Upgrade your 1991 Jeep Grand Wagoneer with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1991 Jeep Grand Wagoneer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Grand Wagoneer functioning at its best. At Advance Auto Parts, we offer a wide selection of 46 Performance and Racing Products for the 1991 Jeep Grand Wagoneer, designed to meet your needs without breaking the bank. From Performance Ignition Product replacements to Performance Distributors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1991 Jeep Grand Wagoneer at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $1,544.99, with an average price of $223.92. Our 46 Performance and Racing Products in stock come from 11 trusted brands, so you’re sure to find the right part for your 1991 Jeep Grand Wagoneer without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1991 Jeep Grand Wagoneer, we stock popular OEM and aftermarket Performance and Racing Products from top names like Mallory, Energy Suspension, Accel, and more. Mallory Performance and Racing Products start at just $99.99 and boast an impressive 4.9 stars average rating from customers. Energy Suspension and Accel also bring quality to the table, with Performance and Racing Products available starting at $5.99, and at an average 4.4 stars rating. With 129 customer reviews and counting, our 1991 Jeep Grand Wagoneer Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1991 Jeep Grand Wagoneer is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Wagoneer in top shape, all in one place. Start shopping confidently below for your 1991 Jeep Grand Wagoneer!

Best-Selling Performance Ignition Products for 1991 Jeep Grand Wagoneers

Enhance the driving experience in your Jeep with 11 quality Performance Ignition Product components, starting at $35.49.

Mallory – Mallory Unilite Ignition Module, 605 (Part No.605)

Mallory Unilite Ignition Module, 605

from

$99.99
Requires a 1.4 ohms Ballast resistor, Loom resistor or internally resisted coil.
See More

Accel – Accel Ignition Coil – Yellow – 42000v 1.4 ohm primary – Points – up to 6500 RPM – The 8140 super stock ignition coil is a canister style coil that … (Part No.8140)

Accel Ignition Coil - Yellow - 42000v 1.4 ohm primary - Points - up to 6500 RPM - The 8140 super stock ignition coil is a canister style coil that ...

from

$49.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary.
See More

Accel – Accel Spark Plug Wire Set – 8mm – Universal – Red Wire with Red Straight Boots – 5040R 8mm super stock universal fit spark plug wires feature a spi… (Part No.5040R)

Accel Spark Plug Wire Set - 8mm - Universal - Red Wire with Red Straight Boots - 5040R 8mm super stock universal fit spark plug wires feature a spi...

from

$116.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
See More

Accel – Accel Ignition Coil – Chrome – 42000v 1.4 ohm primary – Points – up to 6500 RPM – 8140C superstock ignition coil is a chrome canister style high pe… (Part No.8140C)

Accel Ignition Coil - Chrome - 42000v 1.4 ohm primary - Points - up to 6500 RPM - 8140C superstock ignition coil is a chrome canister style high pe...

from

$55.19
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary.
See More

Accel – Accel Spark Plug Wire Set – 8mm – Universal – Black Wire with Black Straight Boots – 5040K, Spark Plug Wires, Super Stock, Spiral Core, 8mm, Black,… (Part No.5040K)

Accel Spark Plug Wire Set - 8mm - Universal - Black Wire with Black Straight Boots - 5040K, Spark Plug Wires, Super Stock, Spiral Core, 8mm, Black,...

from

$103.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
See More

Accel – Accel Spark Plug Wire Set – 8mm – Yellow with Orange Straight Boots – 4040 8mm universal fit super stock spark plug wire sets feature a spiral core… (Part No.4040)

Accel Spark Plug Wire Set - 8mm - Yellow with Orange Straight Boots - 4040 8mm universal fit super stock spark plug wire sets feature a spiral core...

from

$69.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
See More

PerTronix – PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)

PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red

from

$91.99
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.
See More

Accel – Accel Spark Plug Wire Set – 8.8mm-300+ Ferro-Spiral Race – Universal- Vari-Angle Boots – 7040 300+ race wire universal spark plug wire sets have a … (Part No.7040)

Accel Spark Plug Wire Set - 8.8mm-300+ Ferro-Spiral Race - Universal- Vari-Angle Boots - 7040 300+ race wire universal spark plug wire sets have a ...

from

$187.99
The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.
See More

Mallory – Mallory Distributor Wiring Harness, 29349 (Part No.29349)

Mallory Distributor Wiring Harness, 29349

from

$35.49
3-wire for ignition box. PERFORMANCE PARTS>PERFORMANCE IGNITION/STARTING/CHARGING>IGNITION>IGNITION ACCESSORIES & OTHER from Mallory
See More

Mallory – Mallory Promaster Classic Series Ignition Coil, 29440 (Part No.29440)

Mallory Promaster Classic Series Ignition Coil, 29440

from

$204.99
The Mallory Promaster Classic series ignition coil is designed to meet today’s specialized ignition requirements. This coil features a faster rise time and increased spark duration (compared to stock) to increase performance. It has a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This coil also offers excellent wire retention with a spark plug type secondary post, and brass contact terminals.
See More

PerTronix – PerTronix 9FO-1810 Module replacement (only) (one module) for 9FO-181 Ignitor II Kit (Part No.9FO-1810)

PerTronix 9FO-1810 Module replacement (only) (one module) for 9FO-181 Ignitor II Kit

from

$173.99
PerTronix 9FO-1810 Module replacement (only) (one module) for 9FO-181 Ignitor II Kit.
See More

Most Popular 1991 Jeep Grand Wagoneer Performance Distributors

Customize your Jeep with 5 Performance Distributors products like Performance Distributor Cap and Rotor Kits and Performance Distributors, all priced under $614.99.

PerTronix – PerTronix Flame-Thrower Electronic Distributor Billet, D160800 (Part No.D160800)

PerTronix Flame-Thrower Electronic Distributor Billet, D160800

from

$448.99
Our line of Billet Plug n€™ Play Distributors are based on a precision CNC-machined housing with an upper ball bearing to support the steel distributor shaft accurately from idle to redline rpm. These distributors feature our maintenance-free Ignitor II or III electronic ignition module to produce a strong spark and steady ignition timing.
See More

Mallory – Mallory Unilite Electronic Ignition Distributor Series 37, 3760001 (Part No.3760001)

Mallory Unilite Electronic Ignition Distributor Series 37, 3760001

from

$614.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
See More

PerTronix – PerTronix Flame-Thrower Electronic Distributor Billet, D160811 (Part No.D160811)

PerTronix Flame-Thrower Electronic Distributor Billet, D160811

from

$448.99
Our line of Billet Plug n€™ Play Distributors are based on a precision CNC-machined housing with an upper ball bearing to support the steel distributor shaft accurately from idle to redline rpm. These distributors feature our maintenance-free Ignitor II or III electronic ignition module to produce a strong spark and steady ignition timing.
See More

PerTronix – PerTronix Flame-Thrower Electronic Distributor Billet, D160710 (Part No.D160710)

PerTronix Flame-Thrower Electronic Distributor Billet, D160710

from

$416.99
Our line of Billet Plug n€™ Play Distributors are based on a precision CNC-machined housing with an upper ball bearing to support the steel distributor shaft accurately from idle to redline rpm. These distributors feature our maintenance-free Ignitor II or III electronic ignition module to produce a strong spark and steady ignition timing.
See More

Accel – Accel Distributor Cap And Rotor Kit, 8222 (Part No.8222)

Accel Distributor Cap And Rotor Kit, 8222

from

$31.99
Accel Distributor Cap And Rotor Kit, 8222.
See More

Top Picks for 1991 Jeep Grand Wagoneer Performance Fuel Systems

Upgrade Jeep Grand Wagoneers with top-quality Performance Fuel Systems parts, including 3 OEM and aftermarket selections for your 1991 model.

Holley – Holley 2 BBL Carbs, 0-4412S (Part No.0-4412S)

Holley 2 BBL Carbs, 0-4412S

from

$549.99
The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to push you to the finish line on Saturday night, the Holley 0-4412 Performance 2BBL is the perfect choice.
See More

Holley – Holley Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Dual Inlet, Shiny, 0-4412BKX (Part No.0-4412BKX)

Holley Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Dual Inlet, Shiny, 0-4412BKX

from

$799.99
Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!
See More

Holley – Holley Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Gold Dichromate, 0-4412C (Part No.0-4412C)

Holley Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Gold Dichromate, 0-4412C

from

$665.99
The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to push you to the finish line on Saturday night, the Holley 0-4412 Performance 2BBL is the perfect choice.
See More

In-Demand Performance Steering Products for 1991 Jeep Grand Wagoneers

Select from 4 premium Performance Steering Products parts for your 1991 Jeep Grand Wagoneer, with prices ranging from $5.99 to $41.49.

Energy Suspension – Energy Suspension Tie Rod Dust Boot, 9.13101R (Part No.9.13101R)

Energy Suspension Tie Rod Dust Boot, 9.13101R

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
See More

Energy Suspension – Energy Suspension Tie Rod End Boot (Octagon) – 2-Pack, 9.13102G (Part No.9.13102G)

Energy Suspension Tie Rod End Boot (Octagon) - 2-Pack, 9.13102G

from

$6.29
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
See More

Energy Suspension – Energy Suspension Sway Bar Bushing Set, 2.5105G (Part No.2.5105G)

Energy Suspension Sway Bar Bushing Set, 2.5105G

from

$41.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar. Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
See More

Energy Suspension – Energy Suspension Sway Bar Bushing Set, 2.5105R (Part No.2.5105R)

Energy Suspension Sway Bar Bushing Set, 2.5105R

from

$41.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar. Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
See More

Most Sold 1991 Jeep Grand Wagoneer Performance Engines

Explore our best-selling Jeep parts for the 1991 Grand Wagoneer among 10 OEM and aftermarket options starting from $43.99.

Competition Cams – "Competition Cams SUPER VALVE LOCKS, 3/8"" 1 ST, 612-16" (Part No.612-16)

"Competition Cams SUPER VALVE LOCKS, 3/8"" 1 ST, 612-16"

from

$43.99
Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights
See More

Edelbrock – Edelbrock Performer-Link Adjustable True-Roller Timing Chain Set, 7818 (Part No.7818)

Edelbrock Performer-Link Adjustable True-Roller Timing Chain Set, 7818

from

$130.99
Edelbrock part No: 7818 Performer-Link timing chain is for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Cam sprockets are made from 35,000 psi tensile strength cast iron. Crank sprockets are made from billet SAE-1144 steel and induction heat treated. Four Performer-Link sets are stock replacement parts and 50-state legal (see listings in bold type). All other sets have three keyway setting points to ensure accurate timing selection for early or late-model vehicles. Performer-Link timing sets are not for use above 6500 rpm. Performer roller chain sets are engineered to operate up to 6500 rpm. Never hammer directly on chain or sprockets. You can crack the hardened links and pins and cause early failures. Use a sleeve for installations that require hammering, a brass drift punch may be used if you carefully alternate blows on either side of the sprocket to avoid cocking. Never stretch the chain with a screwdriver. Check for clearance between the timing chain and block and between the chain and front cover before reassembly. Be sure that both cam and crank sprockets are exactly in line with each other. Misalignment can cause chain to break.
See More

Edelbrock – Edelbrock RPM AMC/ Jeep Cylinder Head With Exhaust Crossover Complete, 60139 (Part No.60139)

Edelbrock RPM AMC/ Jeep Cylinder Head With Exhaust Crossover Complete, 60139

from

$1544.99
Edelbrock RPM AMC/ Jeep Cylinder Head With Exhaust Crossover Complete, 60139.
See More

B & M – B & M Torque Converter, Tork Master 2400, 10417 (Part No.10417)

B & M Torque Converter, Tork Master 2400, 10417

from

$478.99
The Tork Master 2400 fits 1967-81 Chrysler, Dodge, Plymouth Torqueflite A727 automatic transmissions (Non lock-up) with 24 spline input and a 10-inch bolt circle. Don’t let the exceptional value fool you into thinking Tork Master Converters are not packed with lots of quality features, making them the best value-priced street performance converters money can buy. These converters perform best when paired with stock to modified engines up to 350hp/350 ft lbs of torque, and lighter weight applications, like street rods. The Tork Master will provide noticeably quicker launches and harder acceleration while maintaining normal daily driving qualities. Upgrades like a new precision alloy steel pump drive tube, needle thrust bearing when factory equipped, new thrust washer between turbine and cover when required, and pressure tested and fully balanced by expertly trained technicians. Notes: Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. Not recommended for big block, supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product.
See More

Edelbrock – Edelbrock Performer-Plus Camshaft Kit, 2132 (Part No.2132)

Edelbrock Performer-Plus Camshaft Kit, 2132

from

$371.99
“Edelbrock Performer-Plus Camshaft No: 2132 is designed for 290-401 AMC V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus No: 2132 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you’ll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 275 Ft Lbs of Torque when paired with Performer AMC intake manifold No: 2131 and stock cylinder heads. Camshaft specifications: – Intake duration: 204 Degrees – Exhaust duration: 214 Degrees – Intake lift: .448″” – Exhaust lift: .472″” – Lobe separation: 110 Degree – Intake Center Line: 105 Degree – Vacuum: 15″””
See More

Edelbrock – Edelbrock Water Pump AMC Long Style 1973-Later, Prevents overheating, 8832 (Part No.8832)

Edelbrock Water Pump AMC Long Style 1973-Later, Prevents overheating, 8832

from

$365.99
“Edelbrock No. 8832 Water Pump AMC long style 1973-later ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “”super cooling”” Water Pumps to provide maximum flow, maximum pressure and equal distribution to both sides of the block within 1%. Available for most popular applications, these high performance pumps flow in only one direction for optimum efficiency. The casting’s computer-designed internal passages and precision powdered metal impeller produce the maximum flow rate possible.”
See More

Edelbrock – Edelbrock Pushrod Set, 9637 (Part No.9637)

Edelbrock Pushrod Set, 9637

from

$228.99
“Edelbrock part No: 9637 Pushrods are designed for AMC 343-401 V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise formed wedged ends for a high quality fit with the cup seats. A black oxide finish is added for corrosion resistance. Pushrod Specifications: – Outside Diameter: 5/16″” – Length: 8.050″””
See More

Edelbrock – Edelbrock Sure Seat Valve Springs, 5792 (Part No.5792)

Edelbrock Sure Seat Valve Springs, 5792

from

$157.99
The Edelbrock No: 5792 Sure Seat Valve Spring for Chrysler 383-400-413-440 V8 1969-79 O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.
See More

Edelbrock – Edelbrock Cylinder Head Gasket Set, 7329 (Part No.7329)

Edelbrock Cylinder Head Gasket Set, 7329

from

$113.99
“Edelbrock part No: 7329 head gasket is intended for AMC 304-401 CID V8 engines. This gasket comes as a set and has a 4.275″” bore size, .045″” compressed thickness and 10.6 cc volume. This gasket will fit the 304 AMC small bore applications even though the Edelbrock cylinder head will not. This head gasket is graphite with a steel core and has a stainless steel fire ring. Gasket is compatible with cast iron or aluminum cylinder heads.”
See More

Edelbrock – Edelbrock Performer Series Retainer, 9720 (Part No.9720)

Edelbrock Performer Series Retainer, 9720

from

$103.99
Edelbrock Valve Spring Retainers are made of superior quality steel and are machined and heat treated for maximum strength. They feature a black oxide finish to prevent rust and corrosion
See More

Top-Rated Performance and Racing Products Brands For Your 1991 Jeep Grand Wagoneer

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1991 Jeep Grand Wagoneers. Below you’ll find some of our best rated Performance and Racing Products from Mallory, Energy Suspension, and Accel, and more. Performance and Racing Products from these brands that fit a 1991 Grand Wagoneer start at just $5.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Mallory 1991 Jeep Grand Wagoneer Performance and Racing Products

When it comes to maintaining or upgrading your 1991 Jeep Grand Wagoneer, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1991 Jeep Grand Wagoneer. With over 1 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $99.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Mallory Unilite Ignition Module, 605
from $99.99
(3)
Mallory Unilite Ignition Module, 605
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”

Popular Energy Suspension 1991 Jeep Grand Wagoneer Performance and Racing Products

Energy Suspension auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1991 Jeep Grand Wagoneer owner should feel confident when installing genuine Energy Suspension parts in their vehicle. To ensure the best fit and performance for your 1991 Grand Wagoneer, Advance Auto Parts carries a full inventory of 1 Energy Suspension Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Energy Suspension Performance and Racing Products range up to $5.99, plus, with more than 3 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
Energy Suspension Tie Rod Dust Boot, 9.13101R
from $5.99
(3)
Energy Suspension Tie Rod Dust Boot, 9.13101R
“Replaced the old torn boot and added a bit of color for a low cost.”

FAQs for 1991 Jeep Grand Wagoneer Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1991 Jeep Grand Wagoneers?

Out of 46 Performance and Racing Products that fit 1991 Jeep Grand Wagoneers, the following parts are the top sellers:

What’s the price range for 1991 Jeep Grand Wagoneer Performance and Racing Products?

Performance and Racing Product prices for the 1991 Jeep Grand Wagoneer start at $5.99 and go up to $1,544.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1991 Jeep Grand Wagoneer?

The average price for Performance and Racing Products for the 1991 Jeep Grand Wagoneer is $223.92. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Jeep Grand Wagoneer model years?

Yes, we currently carry Performance and Racing Products for 7 model years of Jeep Grand Wagoneers between 1984 and 1993. Performance and Racing Products are bought most frequently for the following model years: 1993, 1990, 1989, 1988, 1987, 1986, 1985, and 1984.

What are the cheapest Performance and Racing Products for my 1991 Jeep Grand Wagoneer?

The cheapest 1991 Jeep Grand Wagoneer Performance and Racing Products we carry in stock are:

What are the top-rated Performance and Racing Products that fit the 1991 Jeep Grand Wagoneer?

Out of 129 reviews by customers, our 1991 Jeep Grand Wagoneer Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1991 Jeep Grand Wagoneer and their top-rated products:

What types of Performance and Racing Products do you sell for my 1991 Jeep Grand Wagoneer?

Can I get help with 1991 Jeep Grand Wagoneer Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.

What is your return policy for Jeep Grand Wagoneer Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Jeep Grand Wagoneer Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.