1991 Dodge W250 Performance and Racing Products

Essential Performance and Racing Products for 1991 Dodge W250s

Rancho – RS5000 Steering Damper (Part No.RS5403)

RS5000 Steering Damper

from

$78.99
Ideal for off-road driving, towing and street applications, Rancho® RS5000® steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.

Product Features:
  • IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
  • ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires
  • ENGINEERED TO LAST — Features protective boot to safeguard shock rod and oil seal
  • HANDLES EXTREME TEMPERATURE CHANGES — Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
See More

Edelbrock – Cylinder Head Gasket Set for Chrysler (Part No.7327)

Cylinder Head Gasket Set for Chrysler

from

$84.99
Edelbrock part #7327 head gasket is intended for Chrysler Magnum V8 engines. This gasket comes as a set and has a 4.140″ bore size, .048″ compressed thickness and 10.7 cc volume.

Product Features:
  • 4.14 in. Cylinder Bore Diameter
  • 0.048 in. Thickness
  • 10.70cc Volume
  • Gray Color
  • Two Piece Configuration
See More

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1023)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$149.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle or outdoor power small engine. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
  • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
  • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
  • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
See More

Flowmaster Inc. – Super 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.852546)

Super 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound

from

$154.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:
  • Durable fully welded 409 stainless steel
  • Deep aggressive exhaust note
  • Noticeable interior resonance
  • Excellent performance on high horsepower vehicles
  • No internal packing to blowout
See More

Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3757901)

Unilite Electronic Ignition Distributor Series 37

from

$538.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:
  • Improved Combustion And Economy
  • Increased Spark Plug Life
  • Improved Cold Weather Starting
  • Maintenance Free Operation
  • Accurate Spark Timing
  • Self-Lubricating Bushings
  • Years Of Trouble-Free Service
See More

Spectre – Differential Cover (Part No.6089)

Differential Cover

from

$79.99
Spectre’s 12 bolt Differential Covers feature a triple chrome plated steel construction. Designed to perform as well as they look, these covers fit a variety of vehicles. Use the Spectre application search for vehicle specific lookup. Includes 12 SAE standard chrome bolts for installation. You’ll need to supply your own bolts if your application requires metric bolts.

Product Features:
  • Triple chrome plated steel
  • Gasket included
  • 12 bolt design
  • 12 chrome 5/16 inch -18 x 3/4 inch differential cover bolts included
See More

Earls Performance Product – Brake Bleeder Screws (Part No.280022ERL)

Brake Bleeder Screws

from

$32.59
Brake Bleeder Screws

Mr. Gasket – Oil Pan Bolt Kit (Part No.6088)

Oil Pan Bolt Kit

from

$18.99
Oil Pan Bolt Kit

Powertrax – No-Slip Traction System (Part No.9203923125)

No-Slip Traction System

from

$579.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

    Thermocap Radiator Cap

    from

    $48.09
    The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

    Product Features:
    • Indicates coolant temperature
    • Helps prevent coolant injuries
    • Fahrenheit and centigrade readings
    • Color-coded temperature ranges
    • Integrated coolant reclamation valve
    • Improves under-hood appearance
    • Chromed crown with a colored trim ring
    See More

    Hooker Headers – Competition Header (Part No.5902HKR)

    Competition Header

    from

    $329.99
    LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

    Product Features:
    • High Performance
    • Affordable
    • Durable 16 Gauge Material
    • Welds Easier
    • Lasts Longer
    • Heat Cured
    • High Heat Resistant
    See More

    Richmond Gear – Differential Ring And Pinion (Part No.69-0220-1)

    Differential Ring And Pinion

    from

    $438.99
    Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

    Product Features:
    • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
    • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
    • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
    • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
    • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
    See More

    Spectre – Valve Cover (Part No.5274)

    Valve Cover

    from

    $64.99
    Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1965-1991 Chrysler 273-318-340-360 engines, this valve cover features chrome-plated steel construction and a smooth design. Sold in pairs, this stock profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.

    Product Features:
    • Designed for 1965-1991 Chrysler 273-318-340-360 engines
    • Baffled for breather system compatibility
    • Sold in pairs
    • Triple chrome-plated steel construction
    • Stock height
    • Features OEM style sealing edge
    See More

    Mr. Gasket – Header Bolts (Part No.976)

    Header Bolts

    from

    $22.49
    When installing headers you will need header bolts, factory exhaust manifold bolts won’t work. These Mr. Gasket Header Bolts are Grade 5 for strength, black oxide coated, and have a compact hex head that is ideal for use where space is minimal – your typical header flanges. Sold as a set of 14.

    Product Features:
    • 14 per Package
    • Heat-Treated For Strength
    • Ideal For Tight Spaces
    • Grade 5 Material
    • Protective Black Finish
    See More

    Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1350-8759)

    Drive Shaft Pinion Yoke

    from

    $254.99


    Product Features:
    • BILLET HP 1350-29 SPLINE YOKE
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)

    Super Intake Manifold Bolts

    from

    $27.49
    These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

    Product Features:
    • Assures Accurate Torque App
    • Prevents Galling Manifold
    • Grade 5 Material
    • Black Oxide Coasted
    See More

    Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-212-2)

    High Energy 218/218 Hydraulic Flat Cam and Lifter Kit

    from

    $1093.99
    Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

    Product Features:
    • Good blend of efficiency and performance.
    • Perfect choice for performance street rebuilds.
    • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
    See More

    MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

    Blaster 2 Coil: High Performance Ignition Upgrade

    from

    $49.99
    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

    Product Features:
    • Improved output coil for electronic ignitions
    • Works w/Blaster Ignition Or MSD 5/6/7 Series
    • Ballast Resistor Required If Used w/Stock Points Ignition
    • Alkyd tower w/high dielectric properties lessens carbon tracking
    See More

    FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1607)

    Performance Valve Cover Gasket Set

    from

    $18.99
    Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.

    Product Features:
    • Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
    • Not intended for use in emission controlled vehicles.
    See More

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-4003)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1432)

    Exhaust Manifold Gasket Set

    from

    $28.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

    Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

    from

    $17.49
    These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

    Product Features:
    • Zinc plated to resist corrosion and provide a clean professional appearance
    • Made from Grade 5 steel for strength and durability
    • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
    • Allen (socket) Head
    • Zinc Plated For Protection
    See More

    FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1806)

    PERFORMANCE OIL PAN GASKET SET

    from

    $21.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
    • With steel core to provide ultimate excellent blowout resistance.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 4 Piece Set (Part No.1807)

    Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 4 Piece Set

    from

    $30.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
    • With steel core to provide ultimate excellent blowout resistance.
    • Not intended for use in emission controlled vehicles.
    See More

    Hurst – Automatic Shifter, Pro-Matic 2 Truck (Part No.3838510)

    Automatic Shifter, Pro-Matic 2 Truck

    from

    $449.99
    The Hurst truck Pro-Matic 2 ratchet action shifter is ideal for street or strip performance. It features a lighted gear indicator, NHRA approved reverse lockout, chrome stick and a black knob.

    Product Features:
    • Extended Shifter Stick
    • Forward and Reverse Ratchet Action
    • Cable Operated
    • Illuminated Gear Indicator
    • Neutral Safety and Back Up Light Switch
    See More

    B & M – Automatic Shifter, Quicksilver 4 Speed (Part No.80683)

    Automatic Shifter, Quicksilver 4 Speed

    from

    $439.99
    The B&M Quicksilver features a ratcheting action for positive shifts, Chrome Knob, neutral safety switch, NHRA/IHRA approved Reverse Lockout. Fits Most 3 and 4 speeds.

    Product Features:
    • Universal Floor Mount Application
    • Base Trimmed For Custom Fit
    • Cable Operated
    • Quick Installation
    • Accurate Shifting
    See More

    B & M – Automatic Shifter, Hammer Shifter, Universal (Part No.80885)

    Automatic Shifter, Hammer Shifter, Universal

    from

    $339.99
    The Hammer shifter may just be the most comfortable and versatile shifter available. The unique design of the shift handle easily fits all sizes of hands providing the appropriate wrist angle and feel when shifting. The multi-position lockout trigger is s

    Product Features:
    • Ratchet Action Shifter
    • Cable Operated
    • Quick Installation
    • Accurate Shifting
    • Reverse Lockout Feature
    See More

    Upgrade your 1991 Dodge W250 with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1991 Dodge W250, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Performance and Racing Products are key to keeping your W250 functioning at its best. At Advance Auto Parts, we offer a wide selection of 44 Performance and Racing Products for the 1991 Dodge W250, designed to meet your needs without breaking the bank. From Performance Ignition Product replacements to Performance Engines upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1991 Dodge W250 at great prices. Our Performance and Racing Products inventory for this model ranges from just $17.49 to $1,093.99, with an average price of $200.11. Our 44 Performance and Racing Products in stock come from 18 trusted brands, so you’re sure to find the right part for your 1991 Dodge W250 without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1991 Dodge W250, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N Mr. Gasket, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 5 stars average rating from customers. With 493 customer reviews and counting, our 1991 Dodge W250 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1991 Dodge W250 is always ready to roll. We’re committed to providing you with everything you need to keep your W250 in top shape, all in one place. Start shopping confidently below for your 1991 Dodge W250!

    Best-Selling Performance Ignition Products for 1991 Dodge W250s

    Enhance the driving experience in your Dodge with 4 quality Performance Ignition Product components, starting at $30.49.

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

    Blaster 2 Coil: High Performance Ignition Upgrade

    from

    $49.99
    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

    Product Features:
    • Improved output coil for electronic ignitions
    • Works w/Blaster Ignition Or MSD 5/6/7 Series
    • Ballast Resistor Required If Used w/Stock Points Ignition
    • Alkyd tower w/high dielectric properties lessens carbon tracking
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    Most Popular 1991 Dodge W250 Performance Engines

    Customize your Dodge with 10 Performance Engines products like Performance Engine Cylinder Head Gaskets, Performance Intake Manifolds, and Performance Engine Valve Cover Gasket Sets, all priced under $1,093.99.

    Mr. Gasket – Valve Cover Gasket Set (Part No.379)

    Valve Cover Gasket Set

    from

    $36.49
    Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

    Product Features:
    • Manufactured from high-density cork/rubber blend gasket material
    • Provides excellent sealing and durability
    • For OE replacement, high performance street, drag race and oval track use
    See More

    FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1607)

    Performance Valve Cover Gasket Set

    from

    $18.99
    Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.

    Product Features:
    • Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
    • Not intended for use in emission controlled vehicles.
    See More

    Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

    Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

    from

    $17.49
    These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

    Product Features:
    • Zinc plated to resist corrosion and provide a clean professional appearance
    • Made from Grade 5 steel for strength and durability
    • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
    • Allen (socket) Head
    • Zinc Plated For Protection
    See More

    FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1806)

    PERFORMANCE OIL PAN GASKET SET

    from

    $21.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
    • With steel core to provide ultimate excellent blowout resistance.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1008)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $41.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
    • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
    • Raises combustion sealing force to roughly three times that of standard head gaskets.
    • Steel wire rings for the greatest combustion seal strength.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1608)

    PERFORMANCE VALVE COVER GASKET SET

    from

    $37.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
    • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
    • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
    • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
    See More

    Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-212-2)

    High Energy 218/218 Hydraulic Flat Cam and Lifter Kit

    from

    $1093.99
    Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

    Product Features:
    • Good blend of efficiency and performance.
    • Perfect choice for performance street rebuilds.
    • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
    See More

    Weiand – Hi-Ram Intake Manifold (Part No.1995)

    Hi-Ram Intake Manifold

    from

    $703.99
    Hi-Ram Intake Manifold

    Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-222-3)

    Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit

    from

    $378.99
    Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

    Product Features:
    • Excellent performance in street carbureted applications.
    • More vacuum allows an increase in duration for improved performance and assists power brakes.
    • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
    • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
    See More

    Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)

    Super Intake Manifold Bolts

    from

    $27.49
    These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

    Product Features:
    • Assures Accurate Torque App
    • Prevents Galling Manifold
    • Grade 5 Material
    • Black Oxide Coasted
    See More

    Top Picks for 1991 Dodge W250 Performance Oil Filters

    Upgrade Dodge W250s with top-quality Performance Oil Filters parts, including 3 OEM and aftermarket selections for your 1991 model.

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-4003)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

    Remote Oil Filter Kit

    from

    $97.99
    This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.

    Product Features:
    • Relocate oil filter to an easy access location
    See More

    In-Demand Performance Air Filters for 1991 Dodge W250s

    Select from 1 premium Performance Air Filters parts for your 1991 Dodge W250.

    K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1023)

    Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

    from

    $149.99
    K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle or outdoor power small engine. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

    Product Features:
    • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
    • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
    • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
    • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
    • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
    • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
    • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
    • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
    See More

    Most Sold 1991 Dodge W250 Performance Exhaust Products

    Explore our best-selling Dodge parts for the 1991 W250 among 11 OEM and aftermarket options starting from $18.59.

    Hooker Headers – Competition Header (Part No.5902HKR)

    Competition Header

    from

    $329.99
    LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

    Product Features:
    • High Performance
    • Affordable
    • Durable 16 Gauge Material
    • Welds Easier
    • Lasts Longer
    • Heat Cured
    • High Heat Resistant
    See More

    Flowtech – Header Gasket Set (Part No.99361FLT)

    Header Gasket Set

    from

    $18.59
    Header Gasket Set

    Flowtech – Standard Header (Part No.13500FLT)

    Standard Header

    from

    $252.99


    Product Features:
    • Fuel Economy From The Engine
    • Leak Test For Max Performance
    • Mandrel-Formed Power Plenum
    • Leakproof O-Ringed Port Seals
    • Include All Mounting Hardware
    See More

    Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.953048)

    Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound

    from

    $133.99
    The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Flowtech – Ceramic Header (Part No.33500FLT)

    Ceramic Header

    from

    $572.99


    Product Features:
    • Fuel Economy From The Engine
    • Leak Test For Max Performance
    • Ceramic Headers
    • Rust And Corrosion Resistance
    • Mandrel-Formed Power Plenum
    • Leakproof O-Ringed Port Seals
    • Include All Mounting Hardware
    See More

    Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5935)

    Ultra Seal: Exhaust Gasket Set

    from

    $38.49
    Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

    Product Features:
    • Has A Steel Core With Graphite Facing
    • Graphite Facing Has Excellent Thermo-conductivity
    • High Recovery Mat Allows For Better Seal Retention
    See More

    Flowmaster Inc. – 50 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 17in long, Non-Reversible, Moderate Sound (Part No.53058)

    50 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 17in long, Non-Reversible, Moderate Sound

    from

    $185.99
    The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Flowmaster Inc. – Super 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.852546)

    Super 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound

    from

    $154.99
    The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

    Product Features:
    • Durable fully welded 409 stainless steel
    • Deep aggressive exhaust note
    • Noticeable interior resonance
    • Excellent performance on high horsepower vehicles
    • No internal packing to blowout
    See More

    Mr. Gasket – Header Bolts (Part No.976)

    Header Bolts

    from

    $22.49
    When installing headers you will need header bolts, factory exhaust manifold bolts won’t work. These Mr. Gasket Header Bolts are Grade 5 for strength, black oxide coated, and have a compact hex head that is ideal for use where space is minimal – your typical header flanges. Sold as a set of 14.

    Product Features:
    • 14 per Package
    • Heat-Treated For Strength
    • Ideal For Tight Spaces
    • Grade 5 Material
    • Protective Black Finish
    See More

    Flowmaster Inc. – Delta 40 Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842541)

    Delta 40 Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound

    from

    $154.99
    This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
    See More

    Flowmaster Inc. – 50 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Moderate Sound (Part No.52556)

    50 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Moderate Sound

    from

    $185.99
    The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Top-Rated Performance and Racing Products Brands For Your 1991 Dodge W250

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1991 Dodge W250s. Below you’ll find some of our best rated Performance and Racing Products from K&N and Mr. Gasket, and more. Performance and Racing Products from these brands that fit a 1991 W250 start at just $17.49 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular K&N 1991 Dodge W250 Performance and Racing Products

    When it comes to maintaining or upgrading your 1991 Dodge W250, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1991 Dodge W250. With over 3 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $61.99. Plus, with over 157 customer reviews and an average rating of 5 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
    from
    $149.99

    (2)

    Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

    “Excellent filter! I believe your filters are the best on the market.”

    Popular Mr. Gasket 1991 Dodge W250 Performance and Racing Products

    Mr. Gasket auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1991 Dodge W250 owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1991 W250, Advance Auto Parts carries a full inventory of 8 Mr. Gasket Performance and Racing Products. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Mr. Gasket Performance and Racing Products range from $17.49 to $97.99, plus, with more than 2 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    Remote Oil Filter Kit
    from
    $97.99
    This product is not rated

    Remote Oil Filter Kit

    “”

    Thermocap Radiator Cap
    from
    $48.09
    This product is not rated

    Thermocap Radiator Cap

    “”

    FAQs for 1991 Dodge W250 Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1991 Dodge W250s?

    Out of 44 Performance and Racing Products that fit 1991 Dodge W250s, the following parts are the top sellers:

    What’s the price range for 1991 Dodge W250 Performance and Racing Products?

    Performance and Racing Product prices for the 1991 Dodge W250 start at $17.49 and go up to $1,093.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1991 Dodge W250?

    The average price for Performance and Racing Products for the 1991 Dodge W250 is $200.11. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Dodge W250 model years?

    Yes, we currently carry Performance and Racing Products for 12 model years of Dodge W250s between 1981 and 1993. Performance and Racing Products are bought most frequently for the following model years: 1993, 1992, 1990, 1989, 1988, 1987, 1986, 1985, and 1984.

    What are the cheapest Performance and Racing Products for my 1991 Dodge W250?

    What are the top-rated Performance and Racing Products that fit the 1991 Dodge W250?

    Out of 493 reviews by customers, our 1991 Dodge W250 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1991 Dodge W250 and their top-rated products:

    What types of Performance and Racing Products do you sell for my 1991 Dodge W250?

    Can I get help with 1991 Dodge W250 Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Performance and Racing Products and more.

    What is your return policy for Dodge W250 Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Dodge W250 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.