1991 Chevrolet G10 Clutch Systems
More 1991 Chevrolet G10 Clutch Systems Categories
If you’re looking for an original Clutch Systems replacement for a 1991 Chevrolet G10, you can search through our selection below. You’ll also find aftermarket and OEM Clutch Systems to meet your needs.
Essential 1991 Chevrolet G10 Clutch Systems
GM Genuine Parts – Manual Transmission Clutch Pilot Bearing (Part No.CT1078)
from
$24.29
GM Genuine Parts Clutch Pilot Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support the end of the transmission input shaft while the clutch is disengaged. They are located in the center of the flywheel in the crankshaft flange. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Support the end of the transmission input shaft while the clutch is disengaged
- Allows for smooth changing of gears
- Helps keep transmission input shaft properly aligned
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
National – Bearings (Part No.57080)
from
$31.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.203-FF)
from
$10.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (sold by each) (Part No.678-154)
from
$3.99
This clutch flywheel bolt is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
- Thread Size: 7/16-20
- Tread Length: 0.900 in.
- SAE
- PLEASE NOTE: Item priced and sold by each. See store for details.
Dorman – Help – Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In (Part No.74070)
from
$12.99
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ARP Auto Racing – ARP Flywheel Bolt Kit (Part No.100-2801)
from
$12.99
ARP offers two styles of Flywheel bolts: premium grade Pro Series, with a 200,000 psi rating and High Performance, with a 180,000 psi rating. They are both heat-treated prior to thread rolling and machining, feature an exclusive, flat, 12-point head design and larger than stock shank diameter for increased strength and improved flywheel register. Kits include washers and nuts where applicable.
Product Features:
See More
Product Features:
- 7/16″-20 Thread Size(s)
- 8740 Chromoly
- Black Oxide
- Ford 289-460
- Chevy 90 Degree V6 & 265-454 With 2PC Rear Seal
- Set of 6
- 1″ Underhead Length
ATP – M/T FLYWHEEL BOLT (Part No.ZX-2196)
from
$18.99
M/T FLYWHEEL BOLT
Dorman – Help – Flywheel Bolts (Part No.14557)
from
$10.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Sachs – Clutch Release Bearing (Part No.I2020426255SAC)
from
$39.91
The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.
Product Features:
See More
Product Features:
- Extended service life
- Compact, lightweight design
- Sealed for life with high performance, application-specific grease
- Simplified assembly
- Integrated functionality
- Design flexibility
ATP – ATP Flywheel Shim (Part No.GS-8)
from
$27.99
ATP Flywheel Shim
ATP – FLYWHEEL SHIM (Part No.GS-10)
from
$26.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.GS-4)
from
$26.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.GS-11)
from
$23.99
FLYWHEEL SHIM
ARP Auto Racing – For Use With 265/ 502 Chevy V8, 3/8"-16 Thread, 200000Psi Tensile, Hex Head (Part No.230-2202)
from
$34.99
The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.
Product Features:
See More
Product Features:
- High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 Psi
- Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
- Large Diameter, Low Profile Design
- Complete With Washers
- 200,000 PSI
- 1″ Underhead Length
- 3/8″-16 Thread Size
Lakewood – Power Train (Part No.RM-922)
from
$121.99
Power Train
ATP – ATP Manual Transmission Flywheel (Part No.Z-297)
from
$141.99
Vehicles with manual transmissions have a flywheel. The Flywheel is where the clutch assembly is mounted. It provides a smooth friction surface for the clutch disk. Flywheels also have teeth for the starter. Flywheels can crack, break, or break starter teeth. Once a damaged flywheel is diagnosed, a new replacement is the best route to go. ATP flywheels provide fit And function just like the original part to ensure durability And long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- No resurfacing required
- Improves performance
Lakewood – Power Train (Part No.RM-901)
from
$218.99
Power Train
LuK – Clutch Flywheel (Part No.LFW101)
from
$97.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
Hays – Power Train (Part No.10-630)
from
$499.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Lakewood – Power Train (Part No.RM-930)
from
$207.99
Power Train
ATP – Manual Transmission Flywheel (Part No.Z-313)
from
$289.99
Vehicles with manual transmissions have a flywheel. The Flywheel is where the clutch assembly is mounted. It provides a smooth friction surface for the clutch disk. Flywheels also have teeth for the starter. Flywheels can crack, break, or break starter teeth. Once a damaged flywheel is diagnosed, a new replacement is the best route to go. ATP flywheels provide fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- No resurfacing required
- Improves performance
LUK – Flywheel (Part No.I1000835709LUK)
from
$136.39
LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.
Product Features:
See More
Product Features:
- OE quality and direct fit application
- Made from high quality steel
- Designed to reduce clutch chatter and vibration
- Dynamically balanced
Hays – Flexplate: Chevy 57-85 (153T) (Part No.10-012)
from
$145.99
Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.
Product Features:
See More
Product Features:
- Thicker Than Stock Steel Plate
- Ring Gear Securely Welded
- Dual Bolt Patterns
- Zinc-Dichromate Plated To Resist Corrosion
- Withstands High Torque and RPM
ATP – AT HD FLEX PLATE (Part No.Z-460)
from
$60.99
AT HD FLEX PLATE
LuK – OE Quality Flywheel (Part No.LFW131)
from
$107.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
Lakewood – Power Train (Part No.RM-920)
from
$229.99
Power Train
B & M – Flexplate, 168 Tooth 86-94 Chevrolet Small Block (Part No.20239)
from
$181.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1986 to 1994 GM (externally balanced) 4.3L V6 and GM small block V8 engines with one piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.
Product Features:
See More
Product Features:
- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
Lakewood – Power Train (Part No.RM-931)
from
$117.99
Power Train
Popular 1991 Chevrolet G10 Clutch Systems Categories
1991 Chevrolet G10 Clutch Systems
You count on your 1991 Chevrolet G10 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 18 Clutch Systems ranging in price from $3.99 to $499.99, you’re sure to find everything you need for your 1991 Chevrolet G10.
Brands matter. If you want to shop a specific Clutch Systems brand, we stock 9 different brands like ATP, Dorman, and National. 1991 Chevrolet G10 Clutch Systems start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Clutch Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 170 extensive product reviews on 1991 Chevrolet G10 Clutch Systems. Some of the top-rated Clutch Systems products we carry are Flexplate, 168 Tooth 86-94 Chevrolet Small Block with 4.0 stars.
Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 1991 Chevrolet G10 below to get started!
Top-Rated Clutch Systems Brands For Your 1991 Chevrolet G10
Trusted Clutch Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1991 Chevrolet G10 running right for years to come. In our inventory you’ll find brands like ATP, Dorman, National, and even more.
Popular National Clutch Systems
You’ll find popular National brand products across Clutch Pilot Bearings. All are waiting to get your 1991 Chevrolet G10 back on the road. Some of the top-rated National products in these categories are:
Top-Rated Clutch Systems
If are what you’re looking for, our inventory holds plenty. We stock brand Clutch Systems for your 1991 Chevrolet G10, and some of our most reviewed parts include:
FAQs for 1991 Chevrolet G10 Clutch Systems
What are the most purchased Clutch Systems for the 1991 Chevrolet G10?
Out of 18 Clutch Systems for the 1991 Chevrolet G10, the most popular in our inventory are:
from
$12.99
(2)
Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In
Flywheel Bolts
What are the top-rated 1991 Chevrolet G10 Clutch Systems?
Top-rated Clutch Systems for your 1991 Chevrolet G10 based on customer reviews/ratings are:
from
$181.99
(1)
Flexplate, 168 Tooth 86-94 Chevrolet Small Block
“Went on perfectly…very easy install”
