1991 BMW 325i Brake Hoses
More 1991 BMW 325i Brake Hoses
Find your specific 1991 BMW 325i original or aftermarket Brake Hoses below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1991 BMW 325i Brake Hoses
Corteco – CORTECO Brake Hose (Part No.N7000386056CFW)
from
$31.18
Safety that you can rely on: CORTECO brake hoses CORTECO offers a full range of brake hoses in original quality with maximum reliability. Brake hoses are used in every car brake system and should be checked during each maintenance job. They are regarded as one of the most important components in vehicle brake systems. Therefore, CORTECO brake hoses are engineered and designed to OE quality standards. Expertise in leading-edge technology ensure the high quality standards of CORTECO brake hoses. CORTECO brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)
Product Features:
See More
Product Features:
- High durability
- Low volume expansion
- 100% high pressure tested and certified quality
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38552)
from
$17.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Corteco – Brake Hose (Part No.N7000193931CFW)
from
$50.15
Safety that you can rely on: CORTECO brake hoses CORTECO offers a full range of brake hoses in original quality with maximum reliability. Brake hoses are used in every car brake system and should be checked during each maintenance job. They are regarded as one of the most important components in vehicle brake systems. Therefore, CORTECO brake hoses are engineered and designed to OE quality standards. Expertise in leading-edge technology ensure the high quality standards of CORTECO brake hoses. CORTECO brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)
Product Features:
See More
Product Features:
- High durability
- Low volume expansion
- 100% high pressure tested and certified quality
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA116467)
from
$25.49
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
ATE – Original Brake Hose (Part No.N7000386046ATE)
from
$60.26
Highest mechanical stability under load, highest compressive strength and resistance ATE/Continental has been contributing hydraulic brake hose assemblies for the automotive industry since the 1920’s. With an annual production of approximately 40 million brake hose assemblies, ATE/Continental is one of the world leaders in this sector today. As a full brake system supplier, ATE/Continental distinctively places its direct knowledge of overall hydraulic brake design into this product. The complete OEM experience, coupled with the specialized technology of an OE world market leader, uniquely places ATE/Continental near the top for brake hose assemblies with their ATE brand. ATE brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)
Product Features:
See More
Product Features:
- More than 70 braiding machines for braid production.
- Autoclaves or vulcanizing presses, and automatic surface control for the production of the inner and outer rubber layers.
- Primary use of extruded connectors.
- Test stands and laboratories are abundantly available for assured accuracy in satisfying the rigid criteria of all customer specifications.
- Outstanding quality standards with compliance certifications for FMVSS106 on our ATE brake hose assemblies, as well as ISO 14001 certification for production.
- In-house ATE N standards that exceed the legal requirements. Original ATE Brake hoses – Presentation
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA620857)
from
$26.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38002)
from
$20.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
ATE – Original Brake Hose (Part No.N700032119ATE)
from
$25.96
Highest mechanical stability under load, highest compressive strength and resistance ATE/Continental has been contributing hydraulic brake hose assemblies for the automotive industry since the 1920’s. With an annual production of approximately 40 million brake hose assemblies, ATE/Continental is one of the world leaders in this sector today. As a full brake system supplier, ATE/Continental distinctively places its direct knowledge of overall hydraulic brake design into this product. The complete OEM experience, coupled with the specialized technology of an OE world market leader, uniquely places ATE/Continental near the top for brake hose assemblies with their ATE brand. ATE brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)
Product Features:
See More
Product Features:
- More than 70 braiding machines for braid production.
- Autoclaves or vulcanizing presses, and automatic surface control for the production of the inner and outer rubber layers.
- Primary use of extruded connectors.
- Test stands and laboratories are abundantly available for assured accuracy in satisfying the rigid criteria of all customer specifications.
- Outstanding quality standards with compliance certifications for FMVSS106 on our ATE brake hose assemblies, as well as ISO 14001 certification for production.
- In-house ATE N standards that exceed the legal requirements. Original ATE Brake hoses – Presentation
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA380538)
from
$24.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
ATE – Original Brake Hose (Part No.N7000386054ATE)
from
$42.92
Highest mechanical stability under load, highest compressive strength and resistance ATE/Continental has been contributing hydraulic brake hose assemblies for the automotive industry since the 1920’s. With an annual production of approximately 40 million brake hose assemblies, ATE/Continental is one of the world leaders in this sector today. As a full brake system supplier, ATE/Continental distinctively places its direct knowledge of overall hydraulic brake design into this product. The complete OEM experience, coupled with the specialized technology of an OE world market leader, uniquely places ATE/Continental near the top for brake hose assemblies with their ATE brand. ATE brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)
Product Features:
See More
Product Features:
- More than 70 braiding machines for braid production.
- Autoclaves or vulcanizing presses, and automatic surface control for the production of the inner and outer rubber layers.
- Primary use of extruded connectors.
- Test stands and laboratories are abundantly available for assured accuracy in satisfying the rigid criteria of all customer specifications.
- Outstanding quality standards with compliance certifications for FMVSS106 on our ATE brake hose assemblies, as well as ISO 14001 certification for production.
- In-house ATE N standards that exceed the legal requirements. Original ATE Brake hoses – Presentation
Carquest Wearever – Brake Hydraulic Hose (Part No.BHA620858)
from
$26.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Product Features:
See More
Product Features:
- Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured – materials tested to exacting government-regulated safety and durability standards
- Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Carquest Wearever – Brake Hydraulic Hose (Part No.BHA620859)
from
$43.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Product Features:
See More
Product Features:
- Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured – materials tested to exacting government-regulated safety and durability standards
- Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Popular 1991 BMW 325i Brake Hoses Categories
1991 BMW 325i Brake Hoses
Maybe you’re in the middle of a full rebuild of that 1991 BMW 325i. Maybe you just need a couple of Brake Hoses. Either way, Advance Auto Parts has 4 different Brake Hoses in our inventory ranging from $17.99 to $25.96. That means you can find the exact parts or products you need to keep that 1991 BMW 325i running smoothly.
Brake Hoses are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1991 BMW 325i. Carquest and ATE are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Brake Hoses for your 1991 BMW 325i, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Brake Hoses to keep your 1991 BMW 325i rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Brake Hoses Brands To Make Your 1991 BMW 325i Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1991 BMW 325i demands trusted brand parts and products to keep it running. Many trusted brands of Brake Hoses make up Advance Auto Parts’ inventory, and all are ready to help make your 325i the best it can be. Be sure to browse some of our top Brake Hoses brands and parts.
Popular Carquest Wearever Brake Hoses
We carry Carquest Wearever parts in our stock across Brake Hoses categories, plus more. For a 1991 BMW 325i, our most popular Carquest Wearever Brake Hoses include:
FAQs for 1991 BMW 325i Brake Hoses
What are the most purchased Brake Hoses for the 1991 BMW 325i?
Out of 4 Brake Hoses for the 1991 BMW 325i, the most popular in our inventory are:
